Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONFORMAL MAPPING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

New Method to Estimate the Permittivity of Dielectric Materials Using MSPS

A new method to estimate the relative dielectric permittivity of material’s sheet is presented. In this method, a conventional microstrip patch sensor (MSPS) is utilized to resonate at 2.45 GHz. An unknown material, considered as a superstrate layer of 5 mm thickness, is located in the near-field region of the MSPS, at a distance of 5 mm above the sensor. From the changes in the MSPS’s parameters, the dielectric property of the unknown material can be deduced. Based on the conformal map theory, theoretical analyses were performed, and hence, simulation analyses were done using the CST-MW software package. This proposed method was validated through measurements. From the theoretical, simulation, and measurement results, it was shown that depending on the frequency response, the relative permittivity can be estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solutions of Boundary-Value Problems for the Helmholtz Equation in Simply Connected Domains of the Complex Plane

The bases in the spaces of functions analytic in simply connected domains are constructed with the help of conformal mappings of these domains onto a circle. The obtained basis functions are biorthogonal to the Faber polynomials. By using the expansions of analytic functions in series in systems of basis functions, we determine the solutions of boundary-value problems for the Helmholtz equation whose boundary values coincide with the boundary values of these functions.

97 MATHEMATICS AND COMPUTING↗

Systems of Functions Orthogonal Over the Domain and Their Application in Boundary-Value Problems of Mathematical Physics

We formulate a boundary-value problem for eigenvalues and eigenfunctions of the Helmholtz equation in a complex domain with the use of mutually conjugated complex variables. The obtained systems of functions are orthogonal in this domain and constructed by using the Bessel functions and powers of the conformal mappings of the analyzed domains onto a circle. The solutions of boundary-value problems for the principal equations of mathematical physics (hyperbolic, parabolic and elliptic types) are obtained in the form of the sums of series in the systems of functions orthogonal over the domain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effective Diffusion-Medium Thickness for Simplified Polymer-Electrolyte-Fuel-Cell Modeling

In this manuscript, conformal mapping is applied to a rib/channel domain of a polymer-electrolyte-fuel-cell diffusion medium. The analysis leads to the calculation of an effective diffusion-medium thickness, which can subsequently be used in 1-D simulations to account for the average rib/channel 2-D geometric effect. Extensions of the analysis to anisotropic and multilayer diffusion media are also given. Both equations and figures show the impact on a given variable at the catalyst layer of having a combined conducting/nonconducting boundary across from it.

42 ENGINEERING↗

Designing optical elements from isotropic materials by using transformation optics

By taking advantage of a conformal mapping technique, we propose designs for various optical elements such as directional antennas, flat lenses, or bends. In contrast to most of the existing design approaches, the elements can be implemented with isotropic materials, thus strongly facilitating their fabrication. We furthermore generalize the concept and show that under certain conditions previously suggested devices consisting of anisotropic materials may be replaced by isotropic ones using an appropriate transformation. The designs are double-checked by full-wave simulations. A comparison with their anisotropic counterparts reveals a similar performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using a Quasipotential Transformation for Modeling Diffusion Media inPolymer-Electrolyte Fuel Cells

In this paper, a quasipotential approach along with conformal mapping is used to model the diffusion media of a polymer-electrolyte fuel cell. This method provides a series solution that is grid independent and only requires integration along a single boundary to solve the problem. The approach accounts for nonisothermal phenomena, two-phase flow, correct placement of the electronic potential boundary condition, and multilayer media. The method is applied to a cathode diffusion medium to explore the interplay between water and thermal management and performance, the impact of the rib-to-channel ratio, and the existence of diffusion under the rib and flooding phenomena.

30 DIRECT ENERGY CONVERSION↗

Model-independent description of B{yields}{pi}l{nu} decays and a determination of |V{sub ub}|

We propose a new parametrization of the B{yields}{pi} vector form factor f{sub +}(q{sup 2}) as an expansion in powers of a conformal mapping variable, which satisfies unitarity, analyticity and perturbative QCD scaling. The unitarity constraint is used also for defining the systematic error of the expansion. We fit with the new parametrization the available experimental and theoretical information on exclusive B{yields}{pi}l{nu} decays, making a conservative estimate of the effects of correlations in the systematic and statistical errors of the lattice results. With four parameters to describe f{sub +}(q{sup 2}), the systematic error is negligible in the whole semileptonic region. We also obtain |V{sub ub}|=(3.50{+-}0.24)x10{sup -3} where, in our approach, the uncertainty is predominantly statistical.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A fast, high-order solver for the Grad–Shafranov equation

We present a new fast solver to calculate fixed-boundary plasma equilibria in toroidally axisymmetric geometries. By combining conformal mapping with Fourier and integral equation methods on the unit disk, we show that high-order accuracy can be achieved for the solution of the equilibrium equation and its first and second derivatives. Smooth arbitrary plasma cross-sections as well as arbitrary pressure and poloidal current profiles are used as initial data for the solver. Equilibria with large Shafranov shifts can be computed without difficulty. Spectral convergence is demonstrated by comparing the numerical solution with a known exact analytic solution. A fusion-relevant example of an equilibrium with a pressure pedestal is also presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical and experimental study of the bending influence on the capacitance of interdigitated micro-electrodes patterned on flexible substrates

Interdigitated electrodes are common structures in the fields of microelectronics and MEMS. Recent developments in flexible electronics compel an understanding of such structures under bending constraints. In this work, the behavior of interdigitated micro-electrodes when subjected to circular bending has been theoretically and experimentally studied through changes in capacitance. An analytical model has been developed to calculate the expected variation in capacitance of such structures while undergoing outward and inward bending along the direction perpendicular to the electrodes. The model combines conformal mapping techniques to account for the electric field redistribution and fundamental aspects of solid mechanics in order to define the geometrical deformation of the electrodes while bending. To experimentally verify our theoretical predictions, several interdigitated electrode structures with different geometries were fabricated on polymeric substrates by means of photolithography. The samples, placed in a customized bending setup, were bent to controlled radii of curvature while measuring their capacitance. A maximum variation in capacitance of less than 3% was observed at a minimum radius of curvature of 2.5 mm for all the devices tested with very thin electrodes whereas changes of up to 7% were found on stiffer, plated electrodes. Larger or smaller variations would be possible, in theory, by adjusting the geometry of the device. This work establishes a useful predictive tool for the design and evaluation of truly flexible/bendable electronics consisting of interdigitated structures, allowing one to tune the bending influence on the capacitance value through geometrical design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gauge issues in extended gravity and f(R) cosmology

We consider issues related to the conformal mapping between the Einstein and Jordan frames in f(R) cosmology. We consider the impact of the conformal transformation on the gauge of a perturbed system and show that unless the system is written in a restricted set of gauges the mapping could produce an inconsistent result in the target frame. Newtonian gauge lies within the restricted group but synchronous gauge does not. If this is not treated carefully it could in principle contaminate numerical calculations.

79 ASTRONOMY AND ASTROPHYSICS↗

Hydrodynamic Limit of Multiple SLE

Recently del Monaco and Schleißinger addressed an interesting problem whether one can take the limit of multiple Schramm–Loewner evolution (SLE) as the number of slits N goes to infinity. When the N slits grow from points on the real line ℝ in a simultaneous way and go to infinity within the upper half plane ℍ, an ordinary differential equation describing time evolution of the conformal map g{sub t}(z) was derived in the N→∞ limit, which is coupled with a complex Burgers equation in the inviscid limit. It is well known that the complex Burgers equation governs the hydrodynamic limit of the Dyson model defined on ℝ studied in random matrix theory, and when all particles start from the origin, the solution of this Burgers equation is given by the Stieltjes transformation of the measure which follows a time-dependent version of Wigner’s semicircle law. In the present paper, first we study the hydrodynamic limit of the multiple SLE in the case that all slits start from the origin. We show that the time-dependent version of Wigner’s semicircle law determines the time evolution of the SLE hull, K{sub t}⊂ℍ∪ℝ, in this hydrodynamic limit. Next we consider the situation such that a half number of the slits start from a>0 and another half of slits start from −a<0, and determine the multiple SLE in the hydrodynamic limit. After reporting these exact solutions, we will discuss the universal long-term behavior of the multiple SLE and its hull K{sub t} in the hydrodynamic limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transformations from an oblate spheroid to a plane and vice versa: The equations used in the cartographic projection program MAP2

The relationships between the coordinates of a point on the surface on an oblate spheroid and the coordinates of the projection of that point in several common map projections are discussed. Because several of the projections are conformal, the theory of conformally mapping an oblate spheroid to the plane is summarized. For each projection considered, the equations which map the spheroid to the plane and their inverses are given.

Elliott, D. A.↗

Improved design of subcritical and supercritical cascades using complex characteristics and boundary layer correction

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was extended to design supercritical cascades with high solidities and large inlet angles. This capability was achieved by introducing a conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Tchebycheff polynomials. A computer code was developd based on this idea. A number of airfoils designed with the code are presented. Various supercritical and subcritical compressor, turbine and propeller sections are shown. The lag-entrainment method for the calculation of a turbulent boundary layer was incorporated to the inviscid design code. The results of this calculation are shown for the airfoils described. The elliptic conformal transformation developed to map the hodograph domain onto an ellipse can be used to generate a conformal grid in the physical domain of a cascade of airfoils with open trailing edges with a single transformation. A grid generated with this transformation is shown for the Korn airfoil.

Sanz, J. M.↗

Improved design of subcritical and supercritical cascades using complex characteristics and boundary-layer correction

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was extended to design supercritical cascades with high solidities and large inlet angles. This capability was achieved by introducing a conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Tchebycheff polynomials. A computer code was developed based on this idea. A number of airfoils designed with the code are presented. Various supercritical and subcritical compressor, turbine and propeller sections are shown. The lag-entrainment method for the calculation of a turbulent boundary layer was incorporated to the inviscid design code. The results of this calculation are shown for the airfoils described. The elliptic conformal transformation developed to map the hodograph domain onto an ellipse can be used to generate a conformal grid in the physical domain of a cascade of airfoils with open trailing edges with a single transformation. A grid generated with this transformation is shown for the Korn airfoil. Previously announced in STAR as N83-24474

Sanz, J. M.↗

Quasiconformal mappings and grid generation

A finite difference scheme is developed for constructing quasiconformal mappings for arbitrary simply and doubly connected regions. Computational grids are generated to reduce elliptic equations to canonical form. Examples of conformal mappings on surfaces are also included.

Mastin, C. W.↗

A modification of the fusion model for log polar coordinates

The fusion mechanism for application in stereo analysis of range restricted the depth of field and therefore required a shift variant mechanism in the peripheral area to find disparity. Misregistration was prevented by restricting the disparity detection range to a neighborhood spanned by the directional edge detection filters. This transformation was essentially accomplished by a nonuniform resampling of the original image in a horizontal direction. While this is easily implemented for digital processing, the approach does not (in the peripheral vision area) model the log-conformal mapping which is known to occur in the human mechanism. This paper therefore modifies the original fusion concept in the peripheral area to include the polar exponential grid-to-log conformal tesselation. Examples of the fusion process resulting in accurate disparity values are given.

Griswold, N. C.↗

Analysis of heat transfer for a normally impinging liquid-metal slot jet

A two-dimensional liquid-metal slot jet that is impinging normally against a uniformly heated flat plate is analyzed. The distributions of wall temperature and heat-transfer coefficient are obtained as functions of position along the plate. The liquid-metal assumptions are made that the jet is inviscid and that molecular condition is dominating heat diffusion. The solution is obtained by mapping the jet flow region into a potential plane where it occupies a strip of uniform width. The energy equation is transformed into potential coordinates, and an exact solution obtained in the strip region. Conformal mapping is then used to transform the solution into the physical plane.

Siegel, R.↗