Search NASA⌕ Search

SEARCH · Search NASA

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Selective Electrocatalytic Activity of Ligand Stabilized Copper Oxide Nanoparticles

Ligand stabilization can influence the surface chemistry of Cu oxide nanoparticles (NPs) and provide unique product distributions for electrocatalytic methanol (MeOH) oxidation and CO{sub 2} reduction reactions. Oleic acid (OA) stabilized Cu{sub 2}O and CuO NPs promote the MeOH oxidation reaction with 88% and 99.97% selective HCOH formation, respectively. Alternatively, CO{sub 2} is the only reaction product detected for bulk Cu oxides and Cu oxide NPs with no ligands or weakly interacting ligands. We also demonstrate that OA stabilized Cu oxide NPs can reduce CO{sub 2} into CO with a {approx}1.7-fold increase in CO/H{sub 2} production ratios compared to bulk Cu oxides. The OA stabilized Cu oxide NPs also show 7.6 and 9.1-fold increases in CO/H{sub 2} production ratios compared to weakly stabilized and non-stabilized Cu oxide NPs, respectively. Our data illustrates that the presence and type of surface ligand can substantially influence the catalytic product selectivity of Cu oxide NPs.

10 SYNTHETIC FUELS↗

Plasma jet based in situ reduction of copper oxide in direct write printing

Printing of nanostructured films with tailored oxidation state and electronic structure can have far reaching applications in several areas including printable electronics, optoelectronics, solar cells, catalytic conversion, and others. Widely used inkjet/aerosol/screen printing techniques require pre- and postprocessing for enhanced adhesion and tailoring of the chemical state of the thin film. Herein, we demonstrate atmospheric pressure plasma jet printing with unique capability to print and tune in situ the electronic properties and surface morphology of nanomaterials. Plasma printing of copper thin films with tailored oxidation state from an inexpensive copper oxide precursor is demonstrated and characterized using x-ray absorption spectroscopy, Raman spectroscopy, and electrical measurements.

42 ENGINEERING↗

High Temperature Strength of YSZ Joints Brazed with Palladium Silver Copper Oxide Filler Metals

The Ag-CuOx system is being investigated as potential filler metals for use in air brazing high-temperature electrochemical devices such as solid oxide fuel cells and gas concentrators. The current study examines the effects of palladium addition on the high temperature joint strength of specimens prepared from yttria stabilized zirconia (YSZ) bars brazed with the binary Ag-CuOx, and 15Pd-Ag-CuO. It was found that while the binary Ag-CuOx system exhibits stronger room temperature strength than the 15Pd system the strength is reduced to values equivalent of the 15Pd system at 800°C. The 15Pd system exhibits a lower ambient temperature strength that is retained at 800°C. In both systems the failure mechanism at high temperature appears to be peeling of the noble metal component from the oxide phases and tearing through the noble metal phase whereas sufficient adhesion is retained at lower temperatures to cause fracture of the YSZ substrate.

30 DIRECT ENERGY CONVERSION↗

In situ deposits of copper and copper oxide containing condensation polyimide films

Novel copper-polyimide composites have been synthesized via simultaneous thermal decomposition of solid solutions of bis (trifluoroacetylacetonato) copper (II) and thermal cyclodehydration of polyimide acid. In contrast to conventional filled polymer composites which are prepared by dispersion of particles or fibers in a polymer matrix this study has yielded in general uniform Cu or CuO dispersions of very small particle size that reside near the film surface that was exposed to the atmosphere during curing. The nature of the copper deposit, the thickness of the copper deposit, and the polyimide overlayer which bonds the copper to the polymer substrate depend on the curing atmosphere used. A variety of analytical surface methods along with thermogravimetric analysis and variable temperature (surface and volume) electrical resistivity measurements have been used to characterize these thin, flexible copper doped polyimide films.

Porta, G. M.↗

Electroreduction of Carbon Dioxide into Selective Hydrocarbons at Low Overpotential Using Isomorphic Atomic Substitution in Copper Oxide

The conversion of carbon dioxide into selective hydrocarbons is vital for green energy generation. Due to the chemical instability and lower activity, environmentally stable transition metal oxides (e.g., CuO) are unpopular for CO 2 electroreduction catalysis. Here, we demonstrate substitution of Cu with an isomorphic atom, i.e., Ni, in CuO and utilize it for improving the hydrocarbon selectivity by 4 times as compared to that of pristine CuO. Hydrocarbon formation is achieved at the lowest possible applied potential (-0.2 V, reversible hydrogen electrode). This gives the overpotential of about 0.37 V for methane and 0.28 V for ethylene, the lowest ever reported. Employing the ionic interaction between Ni and Cu, this catalyst suppresses the hydrogen evolution reaction to improve the hydrocarbon selectivity prominently. It is observed that current normalized by the Brunauer–Emmett–Teller surface area gives 15–20 times enhancement in the case of Ni-substituted CuO compared to undoped CuO. The in situ experiments indicate that Ni-doped CuO prefers CO pathways compared to formate, resulting into high hydrocarbon selectivity. The experimental observation is further supported by density functional theory studies, which reveal that the Ni-doped CuO catalyst has a higher limiting potential for CO 2 electroreduction to CH 4 due to the stabilization of the CH 2 O intermediate on the Cu 0.9375 Ni 0.0625 O surface rather than the CHO intermediate, in comparison to the pristine CuO surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Cu 3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu 3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. Here, this work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of −208.68 kJ/mol, necessitating a revision of known Cu–H 2 O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu 3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu 2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu 3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu 3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity in a unique type of copper oxide

The mechanism of superconductivity in cuprates remains one of the big challenges of condensed matter physics. High-T c cuprates crystallize into a layered perovskite structure featuring copper oxygen octahedral coordination. Due to the Jahn Teller effect in combination with the strong static Coulomb interaction, the octahedra in high-Tc cuprates are elongated along the c axis, leading to a 3dx 2 -y 2 orbital at the top of the band structure wherein the doped holes reside. This scenario gives rise to 2D characteristics in high-T c cuprates that favor d-wave pairing symmetry. Here, we report superconductivity in a cuprate Ba 2 CuO 4-y , wherein the local octahedron is in a very exceptional compressed version. The Ba 2 CuO 4-y compound was synthesized at high pressure at high temperatures and shows bulk superconductivity with critical temperature (T c ) above 70 K at ambient conditions. This superconducting transition temperature is more than 30 K higher than the T c for the isostructural counterparts based on classical La 2 CuO 4 . X-ray absorption measurements indicate the heavily doped nature of the Ba 2 CuO 4-y superconductor. In compressed octahedron, the 3d3z 2 -r 2 orbital will be lifted above the 3dx 2 -y 2 orbital, leading to significant 3D nature in addition to the conventional 3dx 2 -y 2 orbital. This work sheds important light on advancing our comprehensive understanding of the superconducting mechanism of high T c in cuprate materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation, characterization, and electrochemical application of mesoporous copper oxide

Mesoporous CuO was successfully synthesized via thermal decomposition of CuC{sub 2}O{sub 4} precursors. These products had ring-like morphology, which was made up of nanoparticles with the average diameter of 40 nm. The electrochemical experiments showed that the mesoporous CuO decreased the overvoltage of the electrode and increased electron transference in the measurement of dopamine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of step geometry in copper oxidation by hyperthermal O{sub 2} molecular beam: Cu(511) vs Cu(410)

Steps are known to be often the active sites for the dissociation of O{sub 2} molecules and the nucleation sites of oxide films since they provide paths for subsurface migration and oxygen incorporation. In order to unravel the effect of their morphology on the oxidation of Cu surfaces, we present here a detailed investigation of the O{sub 2} interaction with Cu(511) and compare it with previous results for Cu(410), a surface exhibiting terraces of similar size and geometry but different step morphology. As for Cu(410) we find, by x-ray photoemission spectroscopy performed with synchrotron radiation, that Cu{sub 2}O formation gradually starts above half a monolayer oxygen coverage and that the ignition of oxidation can be lowered to room temperature by dosing O{sub 2} via a supersonic molecular beam at hyperthermal energy. The oxidation rate for Cu(511) comes out to be lower than for Cu(410) at normal incidence, about the same when the O{sub 2} molecules impinge towards the ascending step rise, but higher when they hit the surface along trajectories even slightly inclined towards the descending step rise. These findings can be rationalized by a collision induced absorption mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural originations of irreversible capacity loss from highly lithiated copper oxides

We use electrochemistry, high-energy X-ray diffraction (XRD) with pair-distribution function analysis (PDF), and density functional theory (DFT) to study the instabilities of Li{sub 2}CuO{sub 2} at varying state of charge. Rietveld refinement of XRD patterns revealed phase evolution from pure Li{sub 2}CuO{sub 2} body-centered orthorhombic (Immm) space group to multiphase compositions after cycling. The PDF showed CuO{sub 4} square chains with varying packing during electrochemical cycling. Peaks in the G(r) at the Cu-O distance for delithiated, LiCuO{sub 2}, showed CuO{sub 4} square chains with reduced ionic radius for Cu in the 3+ state. At full depth of discharge to 1.5 V, CuO was observed in fractions greater than the initial impurity level which strongly affects the reversibility of the lithiation reactions contributing to capacity loss. DFT calculations showed electron removal from Cu and O during delithiation of Li{sub 2}CuO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lanthanum induced lattice strain improves hydrogen sulfide capacities of copper oxide adsorbents

This work probes the effects of La on reactions involving CuO sorbents and H 2 S in gaseous streams. La-CuO sorbents with nominal La/Cu atomic ratios of 1:2 achieved higher capacities (27 and 36 g H 2 S per 100 g sorbent) compared to CuO sorbents (25 g H 2 S per 100 g sorbent). Here, comparison of the La-CuO sorbents using energy dispersive x-ray spectroscopy and La L 3 -edge XAS suggested that increased capacity resulted from more uniform dispersion of La within the CuO phase (3.3 wt.% vs. 1.0 wt.% La). X-Ray absorption near edge structure analysis suggested more electron-rich Cu species in La-CuO samples, while extended X-ray absorption fine structure modeling showed an increase in single-scattering path lengths for neighboring and near-neighbor atoms. These changes suggest that La induces strain in the Cu-O lattice, thereby increasing H 2 S capacity by reducing energy barriers associated with surface reactions between oxygen atoms and adsorbed H 2 S molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The modification of BaCe{sub 0.5}Zr{sub 0.3}Y{sub 0.2}O{sub 3–δ} with copper oxide: Effect on the structural and transport properties

The effect of the content of CuO additive on the sinterability, phase composition, microstructure, and electrical properties of BaCe{sub 0.5}Zr{sub 0.3}Y{sub 0.2}O{sub 3–δ} proton-conducting material is studied. Ceramic samples were produced by the citrate–nitrate synthesis method with the addition of 0, 0.25, 0.5, and 1% CuO. It is shown that the relative density of the samples containing 0.5 and 1% CuO is higher than 94% at a sintering temperature of 1450°C, whereas the relative density of the material is no higher than 85% at a lower content of the sintering additive. From the data of X-ray diffraction analysis and scanning electron microscopy, it is established that the introduction of a small CuO content (0.25%) is inadequate for single-phase and high-dense ceramics to be formed. The conductivity and scanning electron microscopy data show that the sample with BaCe{sub 0.5}Zr{sub 0.3}Y{sub 0.2}O{sub 3–δ} + 0.5% CuO composition possesses high total and ionic conductivities as well as a high degree of microstructural stability after hydrogen reduction of the ceramics. The citrate–nitrate method modified by the introduction of a small CuO content can be recommended for the production of single-phase, gas-tight, and high-conductivity electrolytes based on both BaCeO{sub 3} and BaZrO{sub 3}.

36 MATERIALS SCIENCE↗

Effect of Covalent Bonding on Magnetism and the Missing Neutron Intensity in Copper Oxide Compounds

Theories involving highly energetic spin fluctuations are among the leading contenders for explaining high-temperature superconductivity in the cuprates. These theories could be tested by inelastic neutron scattering (INS), as a change in the magnetic scattering intensity that marks the entry into the superconducting state provides a precise quantitative measure of the spin-interaction energy involved in the superconductivity. However, the absolute intensities of spin fluctuations measured in neutron scattering experiments vary widely, and are usually much smaller than expected from fundamental sum rules, resulting in 'missing' INS intensity. Here, we solve this problem by studying magnetic excitations in the one-dimensional related compound, Sr{sub 2}CuO{sub 3}, for which an exact theory of the dynamical spin response has recently been developed. In this case, the missing INS intensity can be unambiguously identified and associated with the strongly covalent nature of magnetic orbitals. We find that whereas the energies of spin excitations in Sr{sub 2}CuO{sub 3} are well described by the nearest-neighbour spin-1/2 Heisenberg Hamiltonian, the corresponding magnetic INS intensities are modified markedly by the strong 2p-3d hybridization of Cu and O states. Hence, the ionic picture of magnetism, where spins reside on the atomic-like 3d orbitals of Cu{sup 2+} ions, fails markedly in the cuprates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nodeless pairing in superconducting copper-oxide monolayer films on Bi 2 Sr 2 CaCu 2 O 8+δ

We report that the pairing mechanism of high-temperature superconductivity in cuprates remains the biggest unresolved mystery in condensed matter physics. To solve the problem, one of the most effective approaches is to investigate directly the superconducting CuO 2 layers. Here, by growing CuO 2 monolayer films on Bi 2 Sr 2 CaCu 2 O 8+δ substrates, we identify two distinct and spatially separated energy gaps centered at the Fermi energy, a smaller U-like gap and a larger V-like gap on the films, and study their interactions with alien atoms by low-temperature scanning tunneling microscopy. The newly discovered U-like gap exhibits strong phase coherence and is immune to scattering by K, Cs and Ag atoms, suggesting its nature as a nodeless superconducting gap in the CuO 2 layers, whereas the V-like gap agrees with the well-known pseudogap state in the underdoped regime. In conclusion, our results support an s-wave superconductivity in Bi 2 Sr 2 CaCu 2 O 8+δ , which, we propose, originates from the modulation-doping resultant two-dimensional hole liquid confined in the CuO 2 layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selenium-doped copper oxide nanoarrays: Robust electrocatalyst for the oxygen evolution reaction with ultralow overpotential

The oxygen evolution reaction (OER) is the key anodic reaction in electrochemical water splitting. OER is a four-electron process with sluggish reaction kinetics. RuO 2 and IrO 2 are the benchmark catalysts for OER. Thus, finding a low-cost, earth-abundant, and stable electrocatalyst for OER is a big challenge. Here in this work, we report OER over Se-CuO/CF nanoarrays with an ultralow overpotential of 440 mV (at 50 mA/cm 2 current density). Se-CuO/CF nanoarray has a TOF of 0.05 s -1 at 300 mV. The catalyst showed consistent OER performance upto1000 cycles run over a period of 10 h. The OER performance of Se-CuO/CF nanoarrays was compared with RuO 2 /CF catalyst and the overpotential for RuO 2 /CF nanoarray was only 10 mV lower than Se-CuO/CF 50 mA/cm 2 current density. Se-CuO/CF nanoarray showed 50 mV lower overpotential than the state of the art RuO 2 /CF catalyst at a current density of 100 mA/cm 2 . The Tafel slope of Se-CuO/CF is 21 mV/decade lower compared to RuO 2 /CF suggesting faster reaction kinetics of Se-CuO/CF. The electrochemical surface area and the conductivity were increased upon doping Se into CuO/CF nanoarrays which can be attributed to enhanced OER performance of the Se-CuO/CF nanoarrays.

36 MATERIALS SCIENCE↗

Enhanced catalytic activity of mesoporous graphitic carbon nitride on thermal decomposition of ammonium perchlorate via copper oxide modification

Highlights: • Novel mpg-C{sub 3}N{sub 4}/rod-like CuO nanocomposites were synthesized via a facile precipitation method for the first time. • The BET surface area of as-synthesized mpg-C{sub 3}N{sub 4}/CuO is 111.33 m{sup 2} g{sup −1}, which is beneficial for catalyzing the thermal decomposition process of ammonium perchlorate (AP). • The synergistic effect between mpg-C{sub 3}N{sub 4} and CuO was the origin of the high catalytic activity. • The mpg-C{sub 3}N{sub 4}/CuO nanocomposites were applied in catalyzing the thermal decomposition of AP and the proposed catalytic mechanism was also proposed. - Abstract: Aiming at enhancing the catalytic activity of mpg-C{sub 3}N{sub 4} on thermal decomposition of ammonium perchlorate, mpg-C{sub 3}N{sub 4} was successfully modified by CuO nanorods, via a facile precipitation method. The structure, morphology and composition of mpg-C{sub 3}N{sub 4} and mpg-C{sub 3}N{sub 4}/CuO nanocomposites were characterized by nitrogen adsorption-desorption measurements, transmission electron microscopy, scanning electron microscope, X-ray power diffraction, fourier transform infrared spectroscopy, as well as X-ray photoelectron spectroscopy. The results demonstrated that CuO nanorods (length of 200–300 nm, diameter of 10–15 nm) were uniformly dispersed throughout mpg-C{sub 3}N{sub 4}, efficiently avoiding the agglomeration. Finally, it was demonstrated that the high weight-loss decomposition temperature of AP was decreased up to 118.5 °C in the presence of 2 wt% mpg-C{sub 3}N{sub 4}/CuO nanocomposites, which was higher than that of pure mpg-C{sub 3}N{sub 4} and CuO, respectively, demonstrating the catalytic performances of the nanocomposites was enhanced via the synergistic catalysis between mpg-C{sub 3}N{sub 4} and CuO.

36 MATERIALS SCIENCE↗

Chromatic annuli formation and sample oxidation on copper thin films by femtosecond laser

We report an experimental investigation on the irradiation of copper thin films with high repetition rate femtosecond laser pulses (1040 nm, 50 MHz), in ambient air and liquid water. We observe a novel, striking phenomenon of chromatic copper oxides (CuO and Cu{sub 2}O) annuli generation. The characteristic features of the chromatic copper oxide annuli are studied by exploiting micro-Raman spectroscopy, optical and scanning electron microscopies. In the case of irradiation in water, the seldom investigated effects of the immersion time, t{sub w}, after irradiation with a fixed number of pulses are analyzed, and an intriguing dependence of the color of the chromatic annuli on t{sub w} is observed. This remarkable behavior is explained by proposing an interpretation scenario addressing the various processes involved in the process. Our experimental findings show that Cu{sub 2}O nanoparticles (size of ≈20 nm) and Cu{sub 2}O nanocubes (nanocube edges of ≈30, ≈60 nm) can be effectively generated by exploiting high repetition rate laser-assisted oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges

We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions

08 HYDROGEN↗