Search NASA⌕ Search

SEARCH · Search NASA

Results for “CRAY COMPUTERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Background studies in gas ionizing x ray detectors

The background response of a gas ionizing proportional x ray detector is estimated by solving the one dimensional photon transport equation for two regions using Monte Carlo techniques. The solution was effected using the SSL VAX 780 and the CRAY XMP computers at Marshall Space Flight Center. The isotropic photon energy spectrum encompassing the range from 1 to 1000 KeV incident onto the first region, the shield, is taken so as to represent the measured spectrum at an altitude of 3 mb over Palastine, Texas. The differential energy spectrum deposited in the gas region, xenon, over the range of 0 to 100 KeV is written to an output file. In addition, the photon flux emerging from the shield region, tin, over the range of 1 to 1000 KeV is also tabulated and written to a separate file. Published tabular cross sections for photoelectric, elastic and inelastic Compton scattering as well as the total absorption coefficient are used. Histories of each incident photon as well as secondary photons from Compton and photoelectric interactions are followed until the photon either is absorbed or exits from the regions under consideration. The effect of shielding thickness upon the energy spectrum deposited in the xenon region for this background spectrum incident upon the tin shield was studied.

Eldridge, Hudson B.↗

T on the Cray X/MP

This research was aimed at porting the T programming language, a dialect of LISP, to the Cray X/MP computer. The effort involved research into systems engineering and software engineering problems related not only to compiler design and implementation, but also to parallel computation, the X/MP being a shared-memory multiprocessor. Porting also involved the sub-tasks of retargeting the assembler, code-generator, and run-time system. A reasonably effective porting methodology that is relatively straight forward, although more difficult than table-driven approaches, has been developed. The run-time system was not ported, and thus the T programs cannot be run without explicit linking of the required run-time support. The run-time performance gain achieved in generated code was found to be disappointing. Recommendations for the achievement of higher performance are given.

Hudak, Paul↗

Unstructured-grid methods development: Lessons le arned

The development is summarized of unstructured grid methods for the solution of the equations of fluid flow and some of the lessons learned are shared. The 3-D Euler equations are solved, including spatial discretizations, temporal discretizations, and boundary conditions. An example calculation with an upwind implicit method using a CFL (Courant Friedricks Lewy) number of infinity is presented for the Boeing 747 aircraft. The results obtained in less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the present capability.

Batina, John T.↗

Progress in unstructured-grid methods development for unsteady aerodynamic applications

The development of unstructured-grid methods for the solution of the equations of fluid flow and what was learned over the course of the research are summarized. The focus of the discussion is on the solution of the time-dependent Euler equations including spatial discretizations, temporal discretizations, and boundary conditions. An example calculation with an implicit upwind method using a CFL number of infinity is presented for the Boeing 747 aircraft. The results were obtained in less than one hour CPU time on a Cray-2 computer, thus, demonstrating the speed and robustness of the capability. Additional calculations for the ONERA M6 wing demonstrate the accuracy of the method through the good agreement between calculated results and experimental data for a standard transonic flow case.

Batina, John T.↗

Implicit upwind-Euler solution algorithms for unstructured-grid applications

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahedral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seide relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using a mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗

Implicit upwind solution algorithms for three-dimensional unstructured meshes

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahedral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seide relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using a mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗

Implicit upwind-Euler solution algorithms for unstructured-grid applications

The development of implicit upwind algorithms for the solution of the three-dimensional, time-dependent Euler equations on unstructured tetrahdral meshes is described. The implicit temporal discretization involves either a two-sweep Gauss-Seidel relaxation procedure, a two-sweep Point-Jacobi relaxation procedure, or a single-sweep Point-Implicit procedure; the upwind spatial discretization is based on the flux-difference splitting of Roe. Detailed descriptions of the three implicit solution algorithms are given, and calculations for the Boeing 747 transport configuration are presented to demonstrate the algorithms. Advantages and disadvantages of the implicit algorithms are discussed. A steady-state solution for the 747 configuration, obtained at transonic flow conditions using s mesh of over 100,000 cells, required less than one hour of CPU time on a Cray-2 computer, thus demonstrating the speed and robustness of the general capability.

Batina, John T.↗

Hashing strategies for the Cray XMT.

Two of the most commonly used hashing strategies - linear probing and hashing with chaining - are adapted for efficient execution on a Cray XMT. These strategies are designed to minimize memory contention. Datasets that follow a power law distribution cause significant performance challenges to shared memory parallel hashing implementations. Experimental results show good scalability up to 128 processors on two power law datasets with different data types: integer and string. These implementations can be used in a wide range of applications.

99 GENERAL AND MISCELLANEOUS↗

An Analysis of Computational Workloads on the Jaguar Cray XT System

This study presents an analysis of science application workloads for the Jaguar Cray XT5 system during its tenure as a 2.3 petaflop supercomputer at Oak Ridge National Laboratory. Jaguar was the first petascale system to be deployed for open science and has been one of the world's top three supercomputers for six releases of the TOP500 list. Its workload is investigated here as a representative of the growing worldwide install base of petascale systems and also as a foreshadowing of science workloads to be expected for future systems. The study considers characteristics of the Jaguar workload such as resource utilization, typical job characteristics, most heavily used applications, application scaling and application usage patterns. Implications of these findings are considered for current petascale workflows and for exascale systems to be deployed later this decade.

Joubert, Wayne↗

STARS: An Integrated, Multidisciplinary, Finite-Element, Structural, Fluids, Aeroelastic, and Aeroservoelastic Analysis Computer Program

A multidisciplinary, finite element-based, highly graphics-oriented, linear and nonlinear analysis capability that includes such disciplines as structures, heat transfer, linear aerodynamics, computational fluid dynamics, and controls engineering has been achieved by integrating several new modules in the original STARS (STructural Analysis RoutineS) computer program. Each individual analysis module is general-purpose in nature and is effectively integrated to yield aeroelastic and aeroservoelastic solutions of complex engineering problems. Examples of advanced NASA Dryden Flight Research Center projects analyzed by the code in recent years include the X-29A, F-18 High Alpha Research Vehicle/Thrust Vectoring Control System, B-52/Pegasus Generic Hypersonics, National AeroSpace Plane (NASP), SR-71/Hypersonic Launch Vehicle, and High Speed Civil Transport (HSCT) projects. Extensive graphics capabilities exist for convenient model development and postprocessing of analysis results. The program is written in modular form in standard FORTRAN language to run on a variety of computers, such as the IBM RISC/6000, SGI, DEC, Cray, and personal computer; associated graphics codes use OpenGL and IBM/graPHIGS language for color depiction. This program is available from COSMIC, the NASA agency for distribution of computer programs.

Gupta, K. K.↗

Numerical simulation of excited jet mixing layers

A numerical simulation of unsteady flow in jet mixing layers, both with and without external excitation, has been performed by solving the time-dependent compressible Navier-Stokes equations. Computations were performed on a CRAY X-MP computer using MacCormick's explicit finite difference algorithm. Different excitation methods were investigated and were shown to be very effective in controlling the well organized periodic production, shedding and pairing of large scale vortex structures. It is found that pressure excitation was generally more effective than temperature excitation, and that grid refinement results in substantial improvement in the resolution of unsteady features. The location and orientation, in addition to the frequency, of the excitation source are shown to have a significant influence on the production and interaction of large scale vortex structures in the jet mixing layer.

Scott, J. N.↗

A computational/experimental study of the flow around a body of revolution at angle of attack

The incompressible Navier-Stokes equations are numerically solved for steady flow around an ogive-cylinder (fineness ration 4.5) at angle of attack. The three-dimensional vortical flow is investigated with emphasis on the tip and the near wake region. The implicit, finite-difference computation is performed on the CRAY X-MP computer using the method of pseudo-compressibility. Comparisons of computational results with results of a companion towing tank experiment are presented for two symmetric leeside flow cases of moderate angles of attack. The topology of the flow is discussed and conclusions are drawn concerning the growth and stability of the primary vortices.

Zilliac, Gregory G.↗

Parallel-vector computation for CSI-design code

Computational aspects of Control-Structure Interaction (CSI) DESIGN code is reviewed. Numerical intensive computation portions of CSI-DESIGN code were identified. Improvements in computational speed for the CSI-DESIGN code can be achieved by exploiting parallel and vector capabilities offered by modern computers, such as the Alliant, Convex, Cray-2, and Cray-YMP. Four options to generate the coefficient stiffness matrix and to solve the system of linear, simultaneous equations are currently available in the CSI-DESIGN code. A preprocessor to use RCM (Reverse Cuthill-Mackee) algorithm for bandwidth minimization was also developed for the CSI-DESIGN code. Preliminary results obtained by solving a small-scale, 97 node CSI finite element model (for eigensolution) have indicated that this new CSI-DESIGN code is 5 to 6 times faster (using 1 Alliant processor) than the old version of CSI-DESIGN code. This speed-up was achieved due to the RCM algorithm and the use of a new skyline solver. Efforts are underway to further improve the vector speed for CSI-DESIGN code, to evaluate its performance on a larger scale CSI model (such as phase zero CSI model) to make the code run efficiently on multiprocessor, parallel computer environment, and to make the code portable among different parallel computers available at NASA LaRC, such as Alliant, Convex, and Cray computers.

Nguyen, Duc T.↗

Comparing the Performance of Blue Gene/Q with Leading Cray XE6 and InfiniBand Systems

Abstract—Three types of systems dominate the current High Performance Computing landscape: the Cray XE6, the IBM Blue Gene, and commodity clusters using InfiniBand. These systems have quite different characteristics making the choice for a particular deployment difficult. The XE6 uses Cray’s proprietary Gemini 3-D torus interconnect with two nodes at each network endpoint. The latest IBM Blue Gene/Q uses a single socket integrating processor and communication in a 5-D torus network. InfiniBand provides the flexibility of using nodes from many vendors connected in many possible topologies. The performance characteristics of each vary vastly along with their utilization model. In this work we compare the performance of these three systems using a combination of micro-benchmarks and a set of production applications. In particular we discuss the causes of variability in performance across the systems and also quantify where performance is lost using a combination of measurements and models. Our results show that significant performance can be lost in normal production operation of the Cray XT6 and InfiniBand Clusters in comparison to Blue Gene/Q.

-High Performance Computing, Performance Evaluatio↗

Lattice QCD simulations on big cats, sea monsters and clock towers

We present details of lattice QCD computations we are performing on the Cray XT series of computers, from BigBen – an XT3 hosted at the Pittsburgh Supercomputing Center (PSC) – through Jaguar (XT4) and Kraken (XT5) – which are hosted at the National Center for Computational Science (NCCS) and the National Institute of Computational Science (NICS), respectively, at Oak Ridge National Laboratory (ORNL). We discuss algorithmic tuning to make the computation more efficient and present some recent results.

Joó, Bálint↗

Low thrust viscous nozzle flow fields prediction

An existing Navier-Stokes code (PARC2D) was used to compute the nozzle flow field. Grids were generated by the interactive grid generator codes TBGG and GENIE. All computations were made on the NASA/MSFC CRAY X-MP computer. Comparisons were made between the computations and MSFC in-house wall pressure measurements for CO2 flow through a conical nozzle having an area ratio of 40. Satisfactory agreements exist between the computations and measurements for different stagnation pressures of 29.4, 14.7, and 7.4 psia, at stagnation temperature of 1060 R. However, agreements did not match precisely near the nozzle exit. Several reasons for the lack of agreement are possible. The computational code assumes a constant gas gamma, whereas the gamma i.e. the specific heat ratio for CO2 varied from 1.22 in the plenum chamber to 1.38 at the nozzle exit. The computations also assumes adiabatic and no-slip walls. Both assumptions may not be correct. Finally, it is possible that condensation occurs during the nozzle expansion at the low stagnation pressure. The next phase of the work will incorporate variable gamma and slip wall boundary conditions in the computational code and develop a more accurate computer code.

Liaw, Goang-Shin↗

Antenna pattern control using impedance surfaces

During this research period, we have effectively transferred existing computer codes from CRAY supercomputer to work station based systems. The work station based version of our code preserved the accuracy of the numerical computations while giving a much better turn-around time than the CRAY supercomputer. Such a task relieved us of the heavy dependence of the supercomputer account budget and made codes developed in this research project more feasible for applications. The analysis of pyramidal horns with impedance surfaces was our major focus during this research period. Three different modeling algorithms in analyzing lossy impedance surfaces were investigated and compared with measured data. Through this investigation, we discovered that a hybrid Fourier transform technique, which uses the eigen mode in the stepped waveguide section and the Fourier transformed field distributions across the stepped discontinuities for lossy impedances coating, gives a better accuracy in analyzing lossy coatings. After a further refinement of the present technique, we will perform an accurate radiation pattern synthesis in the coming reporting period.

Balanis, Constantine A.↗

Online Diagnostics at Scale

The Oak Ridge Leadership Computing Facility (OLCF) housed at the Oak Ridge National Laboratory recently acquired a 200-cabinet Cray XK6. The computer will primarily provide capability computing cycles to the U.S. Department of Energy (DOE) Office of Science INCITE program. The OLCF has a tradition of installing very large computer systems requiring unique methods in order to achieve production status in the most expeditious and efficient manner. This paper will explore some of the methods that have been used over the years at OLCF to eliminate both early-life hardware failures and ongoing failures giving users a more stable machine for production.

99 GENERAL AND MISCELLANEOUS↗