Search NASA⌕ Search

SEARCH · Search NASA

Results for “CTF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Optimization and parallelization of the thermal–hydraulic subchannel code CTF for high-fidelity multi-physics applications

This study describes major improvements to the computational infrastructure of the CTF subchannel code so that full-core, pincell-resolved (i.e., one computational subchannel per real bundle flow channel) simulations can now be performed in much shorter run-times, either in stand-alone mode or as part of coupled-code multi-physics calculations. These improvements support the goals of the Department Of Energy Consortium for Advanced Simulation of Light Water Reactors (CASL) Energy Innovation Hub to develop high fidelity multi-physics simulation tools for nuclear energy design and analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An Improved Energy Deposition Model in MPACT and Explicit Heat Generation Coupling with CTF

The default energy deposition model in the CASL neutronics code MPACT assumes all fission energy is deposited locally in fuel rods. Furthermore, equilibrium delayed energy release is assumed for both steady-state and transient calculations. These approximations limit the accurate representation of the heat generation distribution in space and its variations over time, which are essential for power distribution and thermal-hydraulic coupling calculations. In this paper, an improved energy deposition model is presented in both the spatial and time domains. Spatially, the energy deposition through fission, neutron capture, and slowing-down reactions are explicitly modeled to account for the heat generation from all regions of a reactor core, and a gamma smearing scheme is developed that utilizes the gamma sources from neutron fission and capture. In the time domain, the delayed energy release is modeled by solving an additional equation of delayed heat emitters, similar to the equation of delayed neutron precursors.To allow the explicit heat generation coupling, the interfaces between MPACT and CTF were updated to transfer separate heat sources for different material regions (fuel, clad, moderator and guide tube). The results show that the distributions of the energy deposition between MPACT and MCNP agree very well for various 2-D assembly and quarter-core problems without TH feedback. The MPACT/CTF coupled calculation for the hot full power quarter-core case exhibited a reduced peak pin power by 2.3% and a reduced peak fuel centerline temperature by 17 K when using the explicit energy deposition and heat transfer. The new model also shows a maximum 100 pcm keff effect on assembly depletion problems and an increased overall energy release by 7% in a PWR reactivity-initiated accident (RIA) problem.

Liu, Yuxuan↗

Deployment of Traditional and Hybrid Machine Learning for Critical Heat Flux Prediction in the CTF Thermal-Hydraulics Code

Critical heat flux (CHF) marks the transition from nucleate to film boiling, where heat transfer to the working fluid can rapidly deteriorate. Accurate CHF prediction is essential for efficiency, safety, and preventing equipment damage, particularly in nuclear reactors. Although widely used, empirical correlations frequently exhibit discrepancies when compared to experimental data, limiting their reliability in diverse operational conditions. Traditional machine learning (ML) approaches have demonstrated potential for CHF prediction but often suffer from limited interpretability, data scarcity, and insufficient knowledge of physical principles. Hybrid model approaches, which combine data-driven ML with base models, mitigate these concerns by incorporating prior knowledge of the domain. This study integrates an externally trained purely data-driven ML model and two hybrid models (using the Biasi and Bowring CHF correlations) within the CTF subchannel code via a custom Fortran framework. Performance was evaluated using two validation cases: a subset of the Nuclear Regulatory Commission (NRC) CHF database and the Bennett dryout experiments. In both cases, the hybrid models demonstrated significantly lower error metrics compared to conventional empirical correlations, with the best models often reducing relative error by about 5 percentage points. The pure ML model achieved comparable accuracy, outperforming the hybrid Biasi model in the NRC test case (3.3% versus 5.5% relative error) but exhibiting slightly higher error against the hybrid Bowring model in the Bennett test case (7.7% versus 6.1%). Trend analysis of error parity indicated that ML-based models reduced the tendency for CHF overprediction, improving overall accuracy. These results demonstrate that ML-based CHF models can be effectively integrated into subchannel codes and could potentially increase performance compared to conventional methods.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Edge Plasma Simulations in NSTX and CTF: Synergy of Lithium Coating, Non-Diffusive Anomalous Transport and Drifts

This is the final report for the Research Grant DE-FG02-08ER54989 'Edge Plasma Simulations in NSTX and CTF: Synergy of Lithium Coating, Non-Diffusive Anomalous Transport and Drifts'. The UCSD group including: A.Yu. Pigarov (PI), S.I. Krasheninnikov and R.D. Smirnov, was working on modeling of the impact of lithium coatings on edge plasma parameters in NSTX with the multi-species multi-fluid code UEDGE. The work was conducted in the following main areas: (i) improvements of UEDGE model for plasma-lithium interactions, (ii) understanding the physics of low-recycling divertor regime in NSTX caused by lithium pumping, (iii) study of synergistic effects with lithium coatings and non-diffusive ballooning-like cross-field transport, (iv) simulation of experimental multi-diagnostic data on edge plasma with lithium pumping in NSTX via self-consistent modeling of D-Li-C plasma with UEDGE, and (v) working-gas balance analysis. The accomplishments in these areas are given in the corresponding subsections in Section 2. Publications and presentations made under the Grant are listed in Section 3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initial Assessment of CTF for Time-at-Temperature Applications

The US nuclear industry is interested in improving the economics of their fleet of light-water reactors (LWRs) by uprating US plants. One option being considered is to regain lost margin from overly conservative fuel safety limits. The current limit requires avoidance of critical heat flux (CHF) and prevents further operation of fuel that experiences a dry-out in boiling water reactors (BWRs) or departure from nucleate boiling (DNB) in pressurized water reactors (PWRs); however, it has been shown that temporary, mild dry-out of the fuel does not necessarily increase the risk of fuel failure during its normal anticipated operating life. Such mild dry-out or DNB events may occur during a plant anticipated operational occurrence (AOO), such as a locked rotor in a PWR or a pump trip in a BWR. The time-at-temperature (TAT) approach to regulating fuel operation aims to demonstrate that the fuel rod’s integrity is not challenged during such a mild transient that leads to CHF in which the fuel operates at an elevated temperature for a brief period of time. However, implementing this approach will require extensive fuel material experimental data, as well as supporting modeling and simulation (M&S) predictions, to ensure that the predicted fuel response during AOOs, with all applicable uncertainty considered, will not threaten the safety of the fuel during the transient or the remainder of its anticipated lifecycle. To address this need, a comprehensive effort is being proposed that includes generating cladding material data under TAT conditions, assessment of available code capabilities for TAT conditions, development of new mechanistic models, and demonstration of the M&S capabilities for AOOs of interest. This will require a joint effort between the Nuclear Energy Advanced Modeling and Simulation (NEAMS) and Advanced Fuels Campaign (AFC) programs, as well as close collaboration with nuclear industry stakeholders. The outcome of this collaboration will result in development and assessment of capabilities that can be used by the nuclear industry to support qualification of a TAT-based fuel failure criteria safety limit. This report focuses on the thermal hydraulics (T/H) modeling capabilities and summarizes currently available data for validating the T/H subchannel code CTF for TAT conditions, as well as preliminary assessment results of the code. The initial assessment also resulted in implementation of an alternative post-CHF heat transfer package, which has been shown to significantly improve accuracy. This report is not a final assessment and does not consider all available validation data; it is intended that a future assessment will more fully validate the code for this application.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Proposal of Methodology and Approach for the Coupling of CTF and TRACE within the Framework of VERA-CS

This document discusses strategies for coupling the Consortium for Advanced Simulation of Light water reactors (CASL) thermal-hydraulics code, CTF, with the Nuclear Regulatory Commission (NRC) system code, TRACE. A high-level plan is presented for how the coupling will be implemented, how TRACE will work inside of the VERA-CS environment, and how the coupling will be tested and expanded.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Neutronics/Thermal-hydraulics coupling with RMC and CTF for BEAVRS benchmark calculation

As the computational accuracy required for design and safety analysis of current and future nuclear reactors is continuously increasing, high fidelity numerical reactor simulations including different physics raise wide concern of researchers. The interplay between neutronic and thermal-hydraulic (N-TH) effects of a nuclear reactor core plays an important role in reactor design, safety analysis and core performance. Monte Carlo method can provide high fidelity neutronics analysis of different nuclear reactors, owing to its advantages of the flexible geometry modeling and the use of continuous-energy nuclear cross sections. Armed with the massively parallel algorithms, the computational cost of Monte Carlo codes can be greatly reduced. Compared to single channel thermal process, sub-channel codes have enormous advantages of detailed modeling of full-core reactor or single assembly and high accuracy of calculation results. Detailed sub-channel modeling of a full-core also needs running in parallel, otherwise the computational cost will be relatively high. In this paper, a new hybrid coupling with continuous-energy Monte Carlo code RMC and the sub-channel code CTF has been developed. The coupling codes are applied to steady-state simulations of BEAVRS benchmark in hot full power condition. In order to deal with the temperature dependence of cross sections for Monte Carlo code, the on-the-fly cross sections treatment has been developed in RMC. The on-the-fly method was applied to the N-TH coupling in this work. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improved MPACT energy deposition and explicit heat generation coupling with CTF

The CASL neutronics code MPACT assumes local energy deposition with equilibrium delayed energy for steady-state and transient calculations. These approximations limit the accurate representation of the heat generation in space and its variations over time, both of which are essential for power distribution and thermal–hydraulic coupling analyses. This paper presents an explicit energy deposition model considering the neutron and gamma heating of all regions and the time-dependent delayed energy. The MPACT/CTF interfaces are updated to transfer the explicit heat sources. The new model agrees well with MCNP for problems without thermal–hydraulic feedback. The MPACT/CTF coupled calculation for a hot-full-power quarter-core case using the new model exhibits a reduction of peak pin power by 2.3% and fuel centerline temperature by 17 K. The new model also shows a keff difference up to -100 pcm in depletion and a 30 K peak fuel temperature reduction in a reactivity-initiated-accident problem.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Lifetime measurements of 214Po and 212Po with the CTF liquid scintillator detector at LNGS

We have studied the alpha decays of 214Po into 210Pb and of 212Po into 208Pb tagged by the coincidence with the preceding beta decays from 214Bi and 212Bi, respectively. The employed 222Rn, 232Th, and 220Rn sources were sealed inside quartz vials and inserted in the Counting Test Facility at the underground Gran Sasso National Laboratory in Italy. We find that the mean lifetime of 214Po is (236.00 +- 0.42(stat) +- 0.15(syst)) \mu s and that of 212Po is (425.1 +- 0.9(stat) +- 1.2(syst)) ns. Our results, obtained from data with signal-to-background ratio larger than 1000, reduce the overall uncertainties and are compatible with previous measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface Temperature Mapping Models for STAR and CTF

This milestone presents a demonstration of a surface mapping model to map the surface temperature for single-phase STAR-CCM+ to Cobra-TF using average temperature data. This model can be used to generate high-resolution surface temperature data. This can be accomplished with linear equations or with an alternative non-linear model. Improvements and a path forward for the surface mapping model to be applied to two-phase temperature mappings is also laid out in this milestone report.

42 ENGINEERING↗

Calibration of MAMBA and CRUD Sources Using Full-Core CTF+MAMBA

This report outlines a process for the deterministic calibration of MAMBA using the computational toolkit Dakota. The tools and processes for deterministic calibration have been built and are laid out in this report. While completing this milestone, issues emerged with MAMBA that resulted in delays. The consequences for these difficulties to the calibration process are briefly discussed. The report concludes with an outline of a path forward for Bayesian calibration. The Bayesian calibration will be performed next year. This process was laid out by Benjamin Collins, Robert Salko, and Adam Hetzler.

42 ENGINEERING↗

Identification and Validation of Models of Importance for Simulation of Time-at-Temperature using CTF

The US nuclear industry is currently investigating the feasibility and benefit of pursuing a clad performance–based licensing strategy known as time-at-temperature (TaT)—whereby limited dryout of the fuel is permitted during anticipated operational occurrences (AOOs)—as opposed to the more restrictive critical heat flux (CHF) limitation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Transient MPACT-CTF Capability for RIA with DNB

The objective of this milestone was to continue the development, implementation, verification, and validation of the methods in VERA-CS necessary to solve the whole-core time-dependent neutron transport equations with pin-resolved detail for a practical PWR applications. This capability is necessary to provide the time dependent pin resolved neutron flux for analysis of the Reactivity Insertion Accident (RIA) as specified in the CASL RIA Challenge Problem Implementation Plan, CASL-I-2013-0060-000. The FY17 work reported here continued the FY16 work reported in CASL-U-2016-1188-000 which was primarily focused on MPACT and performed the methods, and Validation and Verification (V&V) efforts necessary to demonstrate the transient capability in VERA-CS in order to facilitate the L1 RIA milestone in FY18. This report describes the activities performed in FY17 in the three general areas of: User Support, Methods Improvements, and in V&V and Demonstration. In the area of User Support various user requested features were added to the code such as detailed reactivity edits and improvements to the VERA input. In the area of Methods Improvements, the features added included user controlled variable time stepping, a one-group CMFD Acceleration, and a Delayed Energy Deposition model; as well as improvements to the overall code robustness for the transient solution. In the area of V&V, the full suite of C5G7 Transient benchmarks was completed and significant progress was made on the solution of SPERT with VERA-CS. In the area of practical demonstration, a full core AP1000 demonstration problem was performed with VERA-CS. The work performed in FY17 enhanced the capability of performing VERACS transients for practical large-scale light water reactor problems with an acceptable computational burden and provided an important step in the completion of the CASL Reactivity Insertion Accident (RIA) Challenge Problem.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗