SEARCH · Search NASA
Results for “Carbon burning”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Skeletal Kinetics Reduction for Astrophysical Reaction Networks
A novel methodology is developed to extract accurate skeletal reaction models for nuclear combustion. Local sensitivities of isotope mass fractions with respect to reaction rates are modeled based on the forced optimally time-dependent (f-OTD) scheme. These sensitivities are then analyzed temporally to generate skeletal models. The methodology is demonstrated by conducting skeletal reduction of constant density and temperature burning of carbon and oxygen relevant to Type Ia supernovae (SNe Ia). The 495-isotopes Torch model is chosen as the detailed reaction network. A map of maximum production of 56 Ni in SNe Ia is produced for different temperatures, densities, and proton-to-neutron ratios. The f-OTD simulations and the sensitivity analyses are then performed with initial conditions from this map. A series of skeletal models are derived and their performances are assessed by comparison against currently existing skeletal models. Previous models have been constructed intuitively by assuming the dominance of α-chain reactions. The comparison of the newly generated skeletal models against previous models is based on the predicted energy release and 44 Ti and 56 Ni abundances by each model. The consequences of ye ≠ 0.5 in the initial composition are also explored where ye is the electron fraction. The simulated results show that 56 Ni production decreases by decreasing ye as expected, and that the 43 Sc is a key isotope in proton and neutron channels toward 56 Ni production. It is shown that an f-OTD skeletal model with 150 isotopes can accurately predict the 56Ni abundance in SNe Ia for ye ≲ 0.5 initial conditions.
Modified carbon fibers to improve composite properties
Thin coatings, 5 to 10 wt. percent, were applied to PAN-based carbon fibers. These coatings were intended to make the carbon fibers less electrically conductive or to cause fibers to stick together when a carbon fiber/epoxy composite burned. The effectiveness of the coatings in these regards was evaluated in burn tests with a test rig designed to simulate burning, impact and wind conditions which might release carbon fibers. The effect of the coatings on fiber and composite properties and handling was also investigated. Attempts at sizing carbon fibers with silicon dioxide, silicon carbide and boron nitride meet with varying degrees of success; however, none of these materials provided an electrically nonconductive coating. Coatings intended to stick carbon fibers together after a composite burned were sodium silicate, silica gel, ethyl silicate, boric acid and ammonium borate. Of these, only the sodium silicate and silica gel provided any sticking together of fibers. The amount of sticking was insufficient to achieve the desired objectives.
Sanduleak's Star (LMC Anonymous) - Its similarity in the far-ultraviolet with the luminous object Eta Carinae and SN 1987A
Low-resolution IUE SWP spectra of the peculiar object LMC Anonymous (Sanduleak's Star) indicates strong evidence for CNO-processed nebula in the vicinity of the star. The far-UV spectrum of LMC Anonymous closely resembles that of the S Condensation of Eta Carinae. The similarity between LMC Anonymous and the S Condensation is apparent from the absolute intensity of the N V, semiforbidden N IV, and semiforbidden N III emission lines compared with the reduced strength of C IV or semiforbidden C III emission. IUE spectra of the S Condensation and SN 1987A may provide important clues concerning the nature of LMC Anonymous, which indicates departures from normal cosmic abundances of nitrogen relative to carbon that are extreme. This may suggest that carbon envelope burning and dredge-up occurred simultaneously during the helium-burning stage.
Durability Challenges for Next Generation of Gas Turbine Engine Materials
Aggressive fuel burn and carbon dioxide emission reduction goals for future gas turbine engines will require higher overall pressure ratio, and a significant increase in turbine inlet temperature. These goals can be achieved by increasing temperature capability of turbine engine hot section materials and decreasing weight of fan section of the engine. NASA is currently developing several advanced hot section materials for increasing temperature capability of future gas turbine engines. The materials of interest include ceramic matrix composites with 1482 - 1648 C temperature capability, advanced disk alloys with 815 C capability, and low conductivity thermal barrier coatings with erosion resistance. The presentation will provide an overview of durability challenges with emphasis on the environmental factors affecting durability for the next generation of gas turbine engine materials. The environmental factors include gaseous atmosphere in gas turbine engines, molten salt and glass deposits from airborne contaminants, impact from foreign object damage, and erosion from ingestion of small particles.
CASA Forest Cover Change Data Sets
Deforestation and forest fires are global land cover changes that can be caused by both natural and human factors. Although monitoring forest fires in near-real time is critical for operational wildfire management, mapping historical wildfires in a spatially explicit fashion is also important for a number of reasons, including climate change studies (e.g., examining the relationship between rising temperatures and frequency of fires), fuel load management (e.g., deciding when and where to conduct controlled burns), and carbon cycle studies (e.g., quantifying how much CO2 is emitted by fires and for emissions reduction efforts under the United Nations programs for Reducing Emissions from Deforestation and Degradation -- REDD).
Building Blocks for Transport-Class Hybrid and Turboelectric Vehicles
NASA has been investing in research efforts to define potential vehicles that use hybrid and turboelectric propulsion to enable savings in fuel burn and carbon usage. This paper overviews the fundamental building blocks that have been derived from those studies and details what key performance parameters have been defined, what key ground and flight tests need to occur, and highlights progress toward each.
Biomass Burning Smoke and Coincident Water Vapor Over the Southeast Atlantic Stratocumulus Region: Results from Observations and Models
In southern Africa, widespread agricultural fires produce substantial biomass burning (BB) emissions over the region. The seasonal smoke plumes associated with these emissions are then advected westward over the persistent stratocumulus cloud deck in the Southeast Atlantic (SEA) Ocean. We present airborne observations made during the NASA ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) campaign over the SEA. Using multiple airborne datasets, we observe a strongly linear correlation between biomass burning indicators (carbon monoxide (CO) and aerosol loading) and atmospheric water vapor content, seen at all altitudes above the boundary layer. This relationship was particularly strong in the 2016 observations, but was also present in the 2017 and 2018 deployments. Using ECMWF and MERRA-2 reanalyses and specialized WRF-Chem simulations, we trace the plume-vapor relationship to an initial humid, smoky continental source region, where it mixes with clean, dry upper-tropospheric air and then is subjected to conditions of strong westward advection, namely the South African Easterly Jet (AEJ-S). Our analysis indicates that airmasses likely left the continent with the same relationship between water vapor and carbon monoxide as was observed by aircraft. This linear relationship developed over the continent due to daytime convection within a deep continental boundary layer (up to ~5-6km) and mixing with higher-altitude air, which resulted in fairly consistent vertical gradients in CO and water vapor, decreasing with altitude and varying in time, but this water vapor does not originate as a product of the BB combustion itself. The smoky, humid mixed air is then subjected to strong zonal winds and advected over the SEA following largely isentropic trajectories. HYSPLIT back trajectories support this interpretation. With better understanding of this relationship, and its spatial and temporal variations, we are working towards accurately quantifying the radiative and dynamical effects of both aerosol and water vapor over this region.
Boulder County Disasters: Mapping Forest Carbon Stocks to Understand Carbon Implications of Treatment and Burning
Explore the source record for details and available documents.
Light Absorption and Chemical Composition of Brown Carbon Organic Aerosol Produced from Burning of Selected Biofuels
Explore the source record for details and available documents.
Carbon starvation is absent regardless of season of burn in Liquidambar styraciflua L.
In the Southeastern United States, the function and stability of pine ecosystems depends on frequent low intensity fires. One of the critical effects of frequent fire is the inhibition of hardwood competition by removing above-ground stems (top-kill). Previous long-term studies have correlated early growing season burns with higher understory mortality when compared to dormant season burns. Seasonal differences in mortality from insufficient carbon reserves in roots after leaf flush were posited as the mechanism but this was never explicitly tested. In this experiment, we burned two-year-old pot-grown sweetgums (Liquidambar styraciflua L.) in the dormant season (February), growing season (May), and compared their physiological responses to plants that were unburned. By the end of the first post-burn growing season, mortality was higher after the dormant season burn than the growing season burn and unburned trees had nearly twice the mass of either the burned treatments. Tissue starch concentrations were similar across all treatments highlighting the resiliency of sweetgum carbon stocks to recover from above-ground stem removal regardless of season. We showed the critical importance of top-killing stems regardless of season of burn. Our findings further suggest that dormant season fires can be more lethal to young sweetgum, possibly due to susceptibility of tender new shoots to freezing damage.
Carbon ablator areal density at fusion burn: Observations and trends at the National Ignition Facility
For inertial confinement fusion experiments, the pusher is composed of a high-density deuterium tritium cyrogenic fuel layer and an ablator, often made of carbon. In an ideal, no-mix implosion, increasing the areal density of the pusher transfers more pressure to the hot spot and increases the hot spot confinement time. There has been a lack of knowledge about the final compressed state of the ablator for implosions at the National Ignition Facility. 14 MeV fusion neutrons inelastically scattering on the remaining carbon ablator excites a nuclear metastable state that emits a prompt 4.4 MeV gamma ray. The gamma reaction history diagnostic data, when reduced by a new data analysis technique, can isolate and measure the carbon gamma rays, which are proportional to the areal density of the ablator during fusion burn. The trends over many National Ignition Facility campaigns show that the ablator areal density is weakly sensitive to the maximum shell velocity, the cold fuel radius, the ablator mass remaining, or the laser picket intensity. Controlled parameter scans reveal that, for specific campaigns, ablator compression has a strong dependence on laser coast time, high Z dopants, and the laser drive foot duration. Using a model of the compressed ablator density profile reveals that the greatest variation of the ablator areal density comes from its thickness, with highly compressed, thin layers having high areal density values. The compression and thickness of the ablator are other metrics that designers should understand to differentiate the types of capsule degradation and maximize the inertial confinement fusion performance.
Historical Domestic Flights from 2016-2020 with Estimations of Greenhouse Gas Emissions by Aircraft Type
Data and analyses are presented on the utilization of aircraft fuel in the U.S. and the greenhouse gas emissions that they create. Aggregated commercial passenger and freight aviation flight data from 2016-2020 is captured from the Bureau of Transportation Statistics website is used to augment flight data from the Sherlock data warehouse at NASA Ames is used to determine the miles flown by major aircraft models. The corresponding fuel burn is estimated using the International Civilian Aviation Organization fuel burn tables and carbon dioxide emissions are calculated using a fuel-burn multiplicative factor. One key conclusion of this analysis is that long haul flights (i.e. >2485 statute miles) create a disproportionately large amount of carbon dioxide emissions in the U.S while short flights (i.e. < 311 statute miles) contribute less than five percent of the U.S. aviation-related carbon dioxide emission. Although these short-haul flights may not have a large impact on overall carbon dioxide emissions, they will be a critical entry point for the adoption of future, larger fuel-efficient novel vehicles and the impact to future airport and infrastructure requirements. The final paper will present some estimates of the impact of advanced technologies on fuel burn and CO₂ emissions in various scenarios.
Estimations of Aircraft and Airport Domestic Greenhouse Gas Emissions from 2016-2021
Data and analyses are presented on the utilization of aircraft fuel in the U.S. and the resulting greenhouse gas emissions. Commercial passenger and freight flight data and airport fuel consumption usage from 2016-2021 are captured from the Bureau of Transportation Statistics website and the Sherlock Data Warehouse managed at NASA Ames Research Center. The resulting dataset is used to determine the miles flown by major aircraft. The corresponding aircraft fuel burn is estimated based on the International Civilian Aviation Organization fuel burn tables, and carbon dioxide emissions are calculated using a fuel-burn multiplicative factor. One conclusion of this analysis is that long-haul flights (flight distances > 2485 statute miles) create a disproportionately large amount of carbon dioxide emissions in the U.S, while short flights (< 311 statute miles) contribute less than five percent of the U.S. aviation-related carbon dioxide emissions. Although these short-haul flights may not have a large impact on overall carbon dioxide emissions, they will be valuable as demonstration missions for the next generation of electric, hybrid, and hydrogen-powered vehicles and their supporting energy infrastructures. This paper discusses recent trends in short-haul missions, their associated aircraft and airport types, and extracts several key requirements for future short-haul vehicles.
Estimations of Aircraft and Airport Domestic Greenhouse Gas Emissions from 2016-2021
Data and analyses are presented on the utilization of aircraft fuel in the U.S. and the resulting greenhouse gas emissions. Commercial passenger and freight flight data and airport fuel consumption usage from 2016-2021 are captured from the Bureau of Transportation Statistics website and the Sherlock Data Warehouse managed at NASA Ames Research Center. The resulting dataset is used to determine the miles flown by major aircraft. The corresponding aircraft fuel burn is estimated based on the International Civilian Aviation Organization fuel burn tables, and carbon dioxide emissions are calculated using a fuel-burn multiplicative factor. One conclusion of this analysis is that long-haul flights (flight distances > 2485 statute miles) create a disproportionately large amount of carbon dioxide emissions in the U.S, while short flights (< 311 statute miles) contribute less than five percent of the U.S. aviation-related carbon dioxide emissions. Although these short-haul flights may not have a large impact on overall carbon dioxide emissions, they will be valuable as demonstration missions for the next generation of electric, hybrid, and hydrogen-powered vehicles and their supporting energy infrastructures. This paper discusses recent trends in short-haul missions, their associated aircraft and airport types, and extracts several key requirements for future short-haul vehicles.
Development of a medium-duty stoichiometric diesel micro-pilot natural gas engine
Fueling a compression-ignition engine with premixed natural gas offers the potential to combine a clean-burning, low-carbon fuel with a high compression ratio, high-efficiency engine. This work describes the development of a multi-cylinder 6.7 L diesel engine converted to run stoichiometric diesel micro-pilot/ natural gas premix combustion with a maximum diesel contribution target of 5% of the total fuel energy and a three-way catalyst aftertreatment system. Results are given by comparing the stoichiometric combustion to the diesel baseline operation, showing combustion characteristics differences, including the rapid two stage heat release. A high load output of 23 bar brake mean effective pressure was obtained with diesel-like brake thermal efficiency of 41%. This operating condition enabled a brake specific CO 2 emissions reduction of up to 25% when compared to diesel. It was observed that the low load output is limited by combustion stability when operated at stoichiometric condition. The three-way catalyst is observed to run at peak efficiency with an equivalence ratio of 1.01. Injector fouling was observed through the inspection of the nozzle and its internal parts, indicating carbon build-up similar to that seen in injector coking mechanisms. A comparison of the developed engine to other engine technologies is given, showing that the diesel micro-pilot natural gas engine performance is in good standing among other diesel and gas engines in the market.
Electronic equipment vulnerability to fire released carbon fibers
The vulnerability of electronic equipment to damage by carbon fibers released from burning aircraft type structural composite materials was investigated. Tests were conducted on commercially available stereo power amplifiers which showed that the equipment was damaged by fire released carbon fibers but not by the composite resin residue, soot and products of combustion of the fuel associated with burning the carbon fiber composites. Results indicate that the failure rates of the equipment exposed to the fire released fiber were consistent with predictions based on tests using virgin fibers.
The potential for damage from the accidental release of conductive carbon fibers from aircraft composites
Carbon and graphite fibers are known to be electrically conductive. The rapidly accelerating use of carbon fibers as the reinforcement in filamentary composite materials brought up the possibility of accidental release of carbon fibers from the burning of crashed commercial airliners with carbon composite parts. Such release could conceivably cause widespread damage to electrical and electronic equipment. The experimental and analytical results of a comprehensive investigation of the various elements necessary to assess the extent of such potential damage in terms of annual expected costs and maximum losses at low probabilities of occurrence are presented. A review of NASA materials research program to provide alternate or modified composite materials to overcome any electrical hazards from the use of carbon composites in aircraft structures is described.