Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbon use efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Biological Mechanisms May Contribute to Soil Carbon Saturation Patterns: Modeling Archive

This Modeling Archive is in support of a TES-SFA publication “Biological Mechanisms May Contribute to Soil Carbon Saturation Patterns” (Craig et al., 2021). We ran and evaluated a multi-assumption soil organic carbon (SOC) model to investigate whether alternative assumptions regarding constraints on soil microbial biomass could lead to soil carbon saturation patterns. We developed this model in the Multi-Assumption Architecture and Testbed (MAAT, https://github.com/walkeranthonyp/MAAT, tag: v1.2.1_Craig2021; Walker et al. 2018). Using MAAT, we embedded three alternative hypotheses in a microbially explicit three-pool SOC model: 1) the efficiency of mineral-associated SOC formation decreases as mineral-associated SOC approaches a maximum value (“Mineral saturation”), 2) the microbial biomass turnover rate increases with increasing microbial biomass (“Density-dependent turnover”), and 3) community carbon use efficiency decreases as microbial biomass increases toward an upper limit (“Density-dependent growth”). We ran a factorial combination of these hypotheses resulting in eight models for three different classes of model (linear decay, Michaelis-Menten decay, or reverse Michaelis-Menten decay), resulting in 24 models, 12 of which are presented or discussed in the related publication. Models were parameterized using values from previous studies with similar models (Wang et al. 2013, Wieder et al. 2014, Li et al. 2014, Georgiou et al. 2017, Hassink and Whitmore 1997) and ran to an approximate steady state (200 years) at six (6) different C input rates corresponding to 0.5, 1, 2, 4, 7, and 10 times the default input value. Further model details are available in the related publication. This archive contains output from three MAAT simulations, and scripts to run these simulations and process and plot the data. Simulations are labeled “lin”, “MM_highKm”, and “RMM_highKm” reflecting factorial runs for linear, Michealis-Menten, and reverse Michaelis-Menten models, respectively. This archive contains: • 3 R scripts prepended with “init_MAAT_” to initialize runs (1 for each simulation), • 1 csv file containing years over which to run simulations (“met_year.csv”), • 1 bash script (.bs) to run MAAT, • 6 XML files that are output from MAAT describing a run (2 for each simulation), • 3 model output csv files prepended by “out_” (1 for each simulation), and • 1 analysis R script for reproducing figures 3 and 4 in Craig et al. 2021. See included user guide (Craig_2021_modeling_archive_20210315.pdf) for file organization details.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Harnessing the power of ab initio calculations, distributed computing and machine learning to efficiently locate extreme molecules for use in carbon-based solar cells (Final Technical Report)

The use of high-throughput virtual screening (HTVS) tools is a powerful tool to expedite the materials discovery of commercially relevant materials. In previous years, our group has developed a molecular discovery platform to generate libraries in order to obtain suitable candidates for different applications, starting from the Harvard Clean Energy Project. This platform is suitable to test in-silico on traditional supercomputing clusters and shared resources, for example, in the IBM World Community Grid. In this project, we used the molecular discovery platform to create and screen a library of candidates of organic photovoltaic (OPVs) molecules. Based on a set of candidates created with combinations of molecular moieties, we were able to filter, by conformation stability, the energy of electronic orbitals and approximated power conversion efficiencies (PCE). To improve the predictions of orbital energies calculated and the PCEs, we used Gaussian Process regression and two sets of molecules. These sets correspond to electronic structure calculations of a higher level of theory and experimental PCE values, respectively. Finally, we selected a subset of the best candidates (molecules with a PCE higher than 10%) to understand its absorbance properties with TD-DFT. This project has demonstrated the capabilities of our molecular discovery platform for HTVS. Finally, machine learning can help us to introduce more complex effects included in bulk conditions and computational intensive calculations on models.

14 SOLAR ENERGY↗
DOE OSTI2020

A genetic link between leaf carbon isotope composition and whole-plant water use efficiency in the C 4 grass Setaria

Genetic selection for whole-plant water use efficiency (yield per transpiration; WUE plant ) in any crop-breeding programme requires high-throughput phenotyping of component traits of WUE plant such as intrinsic water use efficiency (WUE i ; CO 2 assimilation rate per stomatal conductance). Measuring WUE i by gas exchange measurements is laborious and time consuming and may not reflect an integrated WUE i over the life of the leaf. Alternatively, leaf carbon stable isotope composition (δ 13 C leaf ) has been suggested as a potential time-ntegrated proxy for WUE i that may provide a tool to screen for WUE plant . However, a genetic link between δ 13 C leaf and WUE plant in a C 4 species has not been well established. Thus, to confirm if there is a genetic relationship in a C 4 plant between δ 13 C leaf and WUE plant under well watered and water-limited growth conditions, a high-throughput phenotyping facility was used to measure WUE plant in a recombinant inbred line (RIL) population created between the C 4 grasses Setaria viridis and S. italica . Three quantitative trait loci (QTL) for δ 13 C leaf were found and co-localized with transpiration, biomass accumulation, and WUE plant . Additionally, WUE plant for each of the δ 13 C leaf QTL allele classes was negatively correlated with δ 13 C leaf , as would be predicted when WUE i influences WUE plant . These findings demonstrate that δ 13 C leaf is genetically linked to WUE plant , likely to be through their relationship with WUE i , and can be used as a high-throughput proxy to screen for WUE plant in these C 4 species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

An efficient and broadly applicable method for transient transformation of plants using vertically aligned carbon nanofiber arrays

Transient transformation in plants is a useful process for evaluating gene function. However, there is a scarcity of minimally perturbing methods for gene delivery that can be used on multiple organs, plant species, and non-excised tissues. We pioneered and demonstrated the use of vertically aligned carbon nanofiber (VACNF) arrays to efficiently perform transient transformation of different tissues with DNA constructs in multiple plant species. The VACNFs permeabilize plant tissue transiently to allow molecules into cells without causing a detectable stress response. We successfully delivered DNA into leaves, roots and fruit of five plant species (Arabidopsis, poplar, lettuce, Nicotiana benthamiana , and tomato) and confirmed accumulation of the encoded fluorescent proteins by confocal microscopy. Using this system, it is possible to transiently transform plant cells with both small and large plasmids. The method is successful for species recalcitrant to Agrobacterium -mediated transformation. VACNFs provide simple, reliable means of DNA delivery into a variety of plant organs and species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Design of Efficient Molecular Electrocatalysts for Water and Carbon Dioxide Reduction Using Predictive Models of Thermodynamic Properties

Objectives: 1) To design and synthesize water soluble transition metal complexes that function as electrocatalysts for the reduction of water to hydrogen or carbon dioxide to formate 2) To experimentally measure thermochemical properties, such as hydride donor ability, and use these quantities to optimize catalyst performance in solutions of varying pH 3) To incorporate results from detailed mechanistic and kinetic studies to direct improvements in catalyst design 4) To use thermochemical data from objective 2 to generate predictive models for the properties of new complexes to apply to the development of catalysts for other reductive reactions, with an emphasis on carbon dioxide reduction to methanol Description: Wide-spread implementation of renewable but intermittent energy sources, such as solar, requires the development of efficient methods for energy storage. The high energy density of chemical bonds makes chemical fuels an ideal solution for energy storage. Hydrogen and reduced carbon compounds have been proposed as ideal candidates for chemical fuels. However, the generation of chemical fuels from electricity requires competent electrocatalysts. The proposed research focuses on developing electrocatalysts for the reduction of water to hydrogen, and carbon dioxide to formate. Both products can be used directly as an energy carrier in fuel cells, or as a reductant for more saturated chemical fuels. Hydrogen is the most common fuel used in current commercial fuel cells. Additionally, there is interest in formic acid as a liquid carrier for hydrogen because of its increased storage density and ease of dehydrogenation. Formate is also an intermediate in the sequential reduction of CO 2 to methanol, another potential chemical fuel with high energy storage density. Despite the utility of formate as a chemical fuel or precursor, there are very few examples of electrocatalysts for its production from CO 2 , and even fewer demonstrate high product selectivity. In heterogeneous catalysis, the Sabatier principle is used to generate volcano curves that describe optimal thermochemical properties for key intermediates that result in peak catalytic activity. In most cases, such as hydrogen production and oxidation, the most favorable metals (Pt, Re, Rh, and Ir) are rare and expensive. Molecular inorganic complexes provide an opportunity to use electronic and steric ligand effects to tune the critical thermodynamic parameters of abundant metals to values comparable to key surface intermediates on precious metals. This principle will be applied to the design of aqueous homogeneous catalysts for the reduction of H 2 O and CO 2 optimized to function at specific pH ranges. The critical intermediate in both of these reactions is a metal hydride. The strength of this bond, or hydricity (ΔGH - ) dictates the overall thermodynamics of the reduction of H + to H 2 and the sequential reduction of C1 substrates, such as CO 2 , CO, and H 2 CO (the latter to CH 3 OH). ΔGH - will be systematically measured for a series of first row metal complexes to form predictive models for metal and ligand electronic effects. Benefits and Outcomes: This approach addresses thermodynamic requirements essential for energy-efficient catalyst design and transition state barrier considerations for faster catalysis. The advancements made from this research will include the discovery of efficient, stable, and fast catalysts for hydrogen and formate generation from electricity. The ability to store energy efficiently is critical to the widespread use of renewable energy schemes. This provides a viable solution to produce high energy density fuels for stationary and mobile energy applications. The fundamental research conducted is also directly applicable to the design of catalysts for the generation of further reduced products such as methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Insight into Acetic Acid Synthesis from the Reaction of CH 4 and CO 2

The reaction of CH 4 and CO 2 to produce acetic acid is an atom-efficient way for using carbon resources and for mitigating CO 2 emissions. This article provides a critical assessment of the progress in this catalytic reaction from the perspective of identifying and constructing the active sites. We elucidate how Cu- and Zn-based catalysts with different structures are used for the activation of CH 4 and CO 2 . The differences in the metal oxidation state may affect the adsorption of CH 4 and CO 2 and consequently change the activation barriers for the dissociation of the C–H bond of CH 4 and the C–C coupling reaction. We discuss how the active sites and transition states can be modified by the location of metal sites, the framework environment, and the promotion effect of different acid sites. Additionally, we also compare different technologies, including catalyst pretreatment, preactivation with CO 2 , tandem reaction, and plasma-driven catalysis for the CH 4 and CO 2 conversion. We conclude by identifying opportunities for improving the efficiency of heterogeneous catalysts for this important reaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Host analysis-guided selection and targeted engineering (HASTE) of Lipomyces tetrasporus for the conversion of CO2-derived feedstocks

Efficient and cost-competitive bioproduction calls for utilizing CO2-derived feedstocks, such as products from electro-reduction of CO2 and hydrolysate from lignocellulosic biomass. However, efficiently using all their carbon components, including acetate, glucose, and xylose, remains a challenge. Here, we characterize Lipomyces tetrasporus, a novel, robust yeast strain capable of effectively assimilating these carbon sources. We used an integrated systems biology approach combining ¹³C metabolic flux analysis, dynamic labeling experiments, and RNA sequencing. We conducted the first metabolic flux analysis for glucose, xylose, and acetate catabolism in this species. Dynamic labeling revealed a highly active TCA cycle during acetate metabolism, evidenced by rapid citrate and malate accumulation. The strain demonstrated strong NADH/NADPH production and acetyl-CoA synthase activity. Using insights and gene targets from this analysis, we engineered L. tetrasporus for malate production. The engineered strain produced 7.5 g/L malic acid (0.25 g/g yield) in shake flasks with glucose-acetate media and 28.8 g/L malic acid at a yield of 0.20 g/g in fed-batch mode with corn-stover hydrolysate. Together, these insights and rational strain engineering establish L. tetrasporus as a versatile, Crabtree-negative platform that is an energy-CO2-bioproduction nexus for channeling CO2 carbon into value-added bioproducts.

Xiao, Zhengyang↗
DOE OSTI2023

Wood‐density has no effect on stomatal control of leaf‐level water use efficiency in an Amazonian forest

Forest disturbances increase the proportion of fast-growing tree species compared to slow-growing ones. To understand their relative capacity for carbon uptake and their vulnerability to climate change, and to represent those differences in Earth system models, it is necessary to characterise the physiological differences in their leaf-level control of water use efficiency and carbon assimilation. We used wood density as a proxy for the fast-slow growth spectrum and tested the assumption that trees with a low wood density (LWD) have a lower water-use efficiency than trees with a high wood density (HWD). We selected 5 LWD tree species and 5 HWD tree species growing in the same location in an Amazonian tropical forest and measured in situ steady-state gas exchange on top-of-canopy leaves with parallel sampling and measurement of leaf mass area and leaf nitrogen content. We found that LWD species invested more nitrogen in photosynthetic capacity than HWD species, had higher photosynthetic rates and higher stomatal conductance. Furthermore, contrary to expectations, we showed that the stomatal control of the balance between transpiration and carbon assimilation was similar in LWD and HWD species and that they had the same dark respiration rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High Inlet Temperature Combustor for Direct-Fired Supercritical Oxy-Combustion

It is envisioned that supercritical CO 2 (sCO 2 ) electric power plant efficiencies can exceed 52% with 99% carbon capture using direct-fired oxy-combustion. Such efficiencies would be competitive with Natural Gas Combined Cycles (NGCC) and operate with nearly zero carbon emissions. To achieve high plant efficiencies, turbine inlet conditions must approach 1,200 °C at 250 bar. Such conditions, while desirable from a systems perspective, exceed the current state of the art in turbine design and materials qualification. The team of Southwest Research Institute ® (SwRI ® ), Georgia Institute of Technology (Georgia Tech), Spectral Energies, LLC (Spectral), GE Global Research (GE-GRC), and the University of Central Florida (UCF) sought to demonstrate an intermediate step toward these high efficiency plants with the development of a 1 MWth, subscale direct-fired oxy-fuel combustor. The efforts focused largely on the development of an auto-ignition based combustion system capable of providing the targeted 1200 °C and the pilot-scale plant to operate the combustor. While the project was stopped short of the commissioning and demonstration work, the advances made in this effort will reduce risks associated with chemical kinetics, thermal management, water separation, flue gas cleanup, materials selection, and corrosion in future demonstration efforts for the direct-fired oxy-fuel combustion cycles. The following report documents the design, analysis, and installation efforts completed during the project periods of performance.

03 NATURAL GAS↗
DOE OSTI2021

Rapid increases in shrubland and forest intrinsic water-use efficiency during an ongoing megadrought

Significance Photosynthesis involves a tradeoff between the uptake of carbon and the loss of water. Intrinsic water-use efficiency is an indicator of this tradeoff that is pivotal for understanding plant responses to climate change. Global increases in atmospheric CO 2 concentration have increased intrinsic water-use efficiency, but this relationship is also modulated by water availability. Here, we have identified that a severe, multidecadal drought in the American Southwest has caused some of the largest increases in plant water-use efficiency ever observed. The increase was particularly large in shrubs, which dominate much of the landscape in the region. Given that water scarcity in the American Southwest is expected to worsen, these relationships have important implications for plant health and carbon and water cycling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Efficient electrosynthesis of hydrogen peroxide in neutral media using boron and nitrogen doped carbon catalysts

The two-electron electrocatalytic oxygen reduction reaction (2e - ORR) is a promising, sustainable, and efficient route for on-site and small-scale production of hydrogen peroxide (H 2 O 2 ) compared to the conventional anthraquinone oxidation process. Although heteroatom doped carbon materials are widely studied for the 2e - ORR, few studies have been conducted on the synergistic relationship between multiple doping elements on H 2 O 2 performance. Moreover, there is a lack of efficient and stable catalysts for H 2 O 2 electrosynthesis in neutral media. In this work, a series of boron and nitrogen co-doped carbon (BNC) catalysts are synthesized and assessed for the 2e - ORR in neutral pH electrolyte. Through X-ray photoelectron and absorption spectroscopy analyses, we characterize B–N–C moieties and correlate them with H 2 O 2 production performance. In rotating ring disk electrode measurements, BNC catalysts pyrolyzed at 900 °C exhibit H 2 O 2 Faradaic efficiency of ~70% and demonstrate excellent long-term stability over 10 hours of continuous operation. In a three-electrode flow cell, this catalyst achieves ~78% H 2 O 2 Faradaic efficiency and 0.9 mmol cm -2 h -1 productivity at 0.20 V vs. RHE, surpassing most previously reported carbon-based catalysts in neutral media. This work contributes fundamental insights into the role of boron and nitrogen heteroatom dopants toward 2e - ORR and highlights the practical viability of these catalysts for real world applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A rapid embodied carbon assessment tool for priority materials

Embodied carbon limits within building materials are a driving factor in global trade, generating new research and analysis tools in industry. These product assessments, which require utilizing life-cycle assessment (LCA) across broad supply chains, can be expensive, time and data-intensive, and subject to significant variations. Existing methods and tools, such as specific environmental product declarations, typically do not capture these variations and dynamics in supply and manufacturing. Moreover, models and tools must enable stakeholders to assess customized supply chains and future scenarios. In this study, we present the Rapid Embodied Carbon Assessment and Target-setting for Emissions-intensive Materials (REDuCE) tool for building materials. We developed a tool that allows users to select production technologies, transportation mode and distances, concrete carbonation, fuel sources, and regional electricity mixes to supply customization for cement and concrete produced and consumed in California. We generated and integrated a material demand model using residential building stock projections. We provide the user with a wide range of mitigation alternatives through low-carbon production pathways, material use efficiency, transportation modes, and projected electricity grid mixes. In a case study application through four mitigation scenarios, we find emission savings up to 80% by maximizing user mitigation alternatives, primarily driven by reductions in material use intensities. This work represents a foundation for expanding LCA and embodied carbon tools to better enable stakeholders to rapidly and accurately assess customized supply chains while meeting trade requirements.

building materials↗
DOE OSTI2024

Heuristic algorithms for design of integrated monitoring of geologic carbon storage sites

Designs for Risk Evaluation and Management (DREAM) is a tool developed under the National Risk Assessment Partnership (NRAP) to enhance geologic carbon storage safety and efficiency. Using potential leakage scenarios generated externally by the users preferred history-matching approach, DREAM constructs ideal combinations of sensor locations in the right place at the right time to detect as many leaks as possible, detect them as early as possible, and minimize cost. This user-friendly tool, developed in Java, features a window-based GUI for input and a 3D visualization tool for viewing the domain space and optimized monitoring plans. DREAM's latest version accommodates real-world usage by allowing for joint optimization of wellbore point sensor placements and surface geophysics survey geometries, and by using more efficient multi-objective optimization algorithms. We show an example where, these two improvements combined allow us to support containment assurance and go from detecting 80–90 % of the potential CO 2 leakage to +99.7 %, a step-change improvement that can make the deciding difference in whether a site is suitable for geologic carbon storage. Though developed for geologic carbon storage, this tool would be equally applicable in many surface or offshore environmental monitoring projects.

58 GEOSCIENCES↗
DOE OSTI2020

Insights from machine learning of carbon electrodes for electric double layer capacitors

Recent years have witnessed the broad use of carbon electrodes for electric double layer capacitors (EDLCs) because of large surface area, high porosity and low cost. Whereas experimental investigations are mostly focused on the device performance, computational studies have been rarely concerned with electrochemical properties at conditions remote from equilibrium, limiting their direct applications to materials design. Through a comprehensive analysis of extensive experimental data with various machine-learning methods, we report herein quantitative correlations between the structural features of carbon electrodes and the in-operando behavior of EDLCs including energy and power density. Machine learning allows us to identify important characteristics of activated carbons useful to optimize their efficiency in energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Systematic Evaluation of Carbon Hosts for High-Energy Rechargeable Lithium-Metal Batteries

Rechargeable lithium batteries (RLBs) have attracted wide attention for achieving high energy and low cost, but the poor stability of the Li anode has remained as a large challenge. In the last several years, great efforts have been made to develop carbon anode structures for RLB applications. A wide range of carbon structures as well as many chemical modification strategies have been investigated to improve the Coulombic efficiency and extend the cycle life of the anodes or the cells. However, currently there is no clear conclusion on key factors that determine the performance of such the types of carbon structures due to the wide range of experimental conditions used in such studies. In this study, we systematically evaluated and compared the electrochemical properties of representative carbon anode materials as well as chemically functionalized carbon materials in different electrolytes. We have found that chemical functionalization, metallic loading, and the types of micro or nano-structures all have an effect on Li deposition/stripping process, but by far the most critical factor is the nature of the electrolytes. All carbon materials produced poor Coulombic efficiency and cycle life in conventional carbonate or ether-based electrolytes. However, when a Li metal compatible is used, the average Coulombic efficiency of Li metal deposition on all carbon structures is increased to 99% or higher. This study provides critical lessons on the directions for carbon anodes for RLBs. Based on these findings, we constructed Li metal coin cells using prelithiated hard carbon, LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode, and compatible electrolyte and tested the cells under conditions of lean electrolyte, lean Li metal and high cathode loading required for more than 300 Wh kg-1 specific energy. More than 200 stable cycles were demonstrated with over 80% capacity retention. Furthermore, the existing challenges and potential approaches have been discussed to further extend the cyclability of lithium-metal batteries under practical conditions.

Liu, Yao↗
DOE OSTI2024

Responses of Marginal and Intrinsic Water-Use Efficiency to Changing Aridity Using FLUXNET Observations

According to classic stomatal optimization theory, plant stomata are regulated to maximize carbon assimilation for a given water loss. A key component of stomatal optimization models is marginal water-use efficiency (mWUE), the ratio of the change of transpiration to the change in carbon assimilation. Although the mWUE is often assumed to be constant, variability of mWUE under changing hydrologic conditions has been reported. However, there has yet to be a consensus on the patterns of mWUE variabilities and their relations with atmospheric aridity. We investigate the dynamics of mWUE in response to vapor pressure deficit (VPD) and aridity index using carbon and water fluxes from 115 eddy covariance towers available from the global database FLUXNET. We demonstrate a non-linear mWUE-VPD relationship at a sub-daily scale in general; mWUE varies substantially at both low and high VPD levels. However, mWUE remains relatively constant within the mid-range of VPD. Despite the highly non-linear relationship between mWUE and VPD, the relationship can be informed by the strong linear relationship between ecosystem-level inherent water-use efficiency (IWUE) and mWUE using the slope, m *. We further identify site-specific m * and its variability with changing site-level aridity across six vegetation types. We suggest accurately representing the relationship between IWUE and VPD using Michaelis–Menten or quadratic functions to ensure precise estimation of mWUE variability for individual sites.

54 ENVIRONMENTAL SCIENCES↗