Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cell Parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Hematologic parameters of astrorats flown on SL-3

Hematologic studies were performed on a group of large and small rats which were sacrificed after flying in life sciences shuttle engineering flight SL-3. The results are presented on flight (F) and control (C) 200 gm rats. The small flight animals demonstrated a significant increase in hematocrits, red blood cell counts, hemoglobins and peripheral blood percentages of neutrophils as well as a decrease in percentage of lymphocytes. Erythropoietin (Ep) determinations were similar for the two groups as were the bone marrow an spleen differential counts. In vitro cultures for erythroid colonies of bone marrow showed that in response to different doses of Ep, in all cases where differnces were statistically significant, the F rats had increased colony counts. The changes in red cell parameters could be caused by a decrease in plasma volume. However, no isotopic studies were possible on this flight and this lack points up the need for such studies to determine the red cell mass and plasma volume.

Lange, R. D.↗
NASA NTRS1997

ATM Quality of Service Parameters at 45 Mbps Using a Satellite Emulator: Laboratory Measurements

Results of 45-Mbps DS3 intermediate-frequency loopback measurements of asynchronous transfer mode (ATM) quality of service parameters (cell error ratio and cell loss ratio) are presented. These tests, which were conducted at the NASA Lewis Research Center in support of satellite-ATM interoperability research, represent initial efforts to quantify the minimum parameters for stringent ATM applications, such as MPEG-1 and MPEG-2 video transmission. Portions of these results were originally presented to the International Telecommunications Union's ITU-R Working Party 4B in February 1996 in support of their Draft Preliminary Recommendation on the Transmission of ATM Traffic via Satellite.

Ivancic, William D.↗
NASA NTRS1982

Deep Discharge Reconditioning and Shorted Storage of Batteries

The identification and measurement of hydrogen recombination in sealed nickel-cadium cells makes deep reconditioning on a battery basis safe and feasible. Deep reconditioning improves performance and increases life of nickel-cadium batteries in geosynchronous orbit applications. The hydrogen mechanism and supporting data are presented. Parameter cell design experiments are described which led to the definition of nickel-cadium cells capable of high rate overdischarge without detriment to specific energy. Nickel-cadium calls of identical optimum design were successfully cycled for 7 seasons in simulation of geosynchronous orbit at 75 percent depth-of-discharge with extensive midseason and end-of-season overdischarge at rates varying from C/20 to C/4. Destructive physical analysis and cyclin data indicated no deterioration or the development of dangerous pressures as a result of the cycling with overdischarge.

Ritterman, P. F.↗
NASA NTRS1989

An empirical study of the performance of APMOVPE AM0 InP homojunction solar cells as a function of emitter thickness and doping, and base doping

Their excellent radiation resistance and conversion efficiencies greater than 20 percent, measured under global conditions, make InP shallow-homojunction solar cells very attractive for space or terrestrial application. In addition, modeling studies show that, for optimized design, efficiencies of these devices should exceed 20 percent even under AM0 conditions. However, a systematic experimental investigation of the influence of the various cell design parameters on cell performance has not as yet been made. For the n+/p/p+ structures investigated in the previous modeling study, the design parameters include the impurity concentrations and thicknesses of the emitter and base layers. In the work reported here, researchers discuss an experimental investigation of the effects on cell performance of varying the impurity concentrations of the emitter and base and thickness of the emitter.

Wanlass, M. W.↗
DOE OSTI2024

Effect of solvothermal synthesis parameters on the crystallite size and atomic structure of cobalt iron oxide nanoparticles

We here investigate how the synthesis method affects the crystallite size and atomic structure of cobalt iron oxide nanoparticles. By using a simple solvothermal method, we first synthesized cobalt ferrite nanoparticles of ca. 2 and 7 nm, characterized by Transmission Electron Microscopy (TEM), Small Angle X-ray scattering (SAXS), X-ray and neutron total scattering. The smallest particle size corresponds to only a few spinel unit cells. Nevertheless, Pair Distribution Function (PDF) analysis of X-ray and neutron total scattering data shows that the atomic structure, even in the smallest nanoparticles, is well described by the spinel structure, although with significant disorder and a contraction of the unit cell parameter. These effects can be explained by the surface oxidation of the small nanoparticles, which is confirmed by X-ray near edge absorption spectroscopy (XANES). Neutron total scattering data and PDF analysis reveal a higher degree of inversion in the spinel structure of the smallest nanoparticles. Neutron total scattering data also allow magnetic PDF (mPDF) analysis, which shows that the ferrimagnetic domains correspond to ca. 80% of the crystallite size in the larger particles. A similar but less well-defined magnetic ordering was observed for the smallest nanoparticles. Finally, we used a co-precipitation synthesis method at room temperature to synthesize ferrite nanoparticles similar in size to the smallest crystallites synthesized by the solvothermal method. Structural analysis with PDF demonstrates that the ferrite nanoparticles synthesized via this method exhibit a significantly more defective structure compared to those synthesized via a solvothermal method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2002

Dose and dose rate effects of whole-body proton-irradiation on lymphocyte blastogenesis and hematological variables: part II

The goal of part II of this study was to evaluate functional characteristics of leukocytes and circulating blood cell parameters after whole-body proton irradiation at varying doses and at low- and high-dose-rates (LDR and HDR, respectively). C57BL/6 mice (n=51) were irradiated and euthanized at 4 days post-exposure for assay. Significant radiation dose- (but not dose-rate-) dependent decreases were observed in splenocyte responses to T and B cell mitogens when compared to sham-irradiated controls (P<0.001). Spontaneous blastogenesis, also significantly dose-dependent, was increased in both blood and spleen (P<0.001). Red blood cell counts, hemoglobin concentration, and hematocrit were decreased in a dose-dependent manner (P<0.05), whereas thrombocyte numbers were only slightly affected. Comparison of proton- and gamma-irradiated groups (both receiving 3 Gy at HDR) showed a higher level of spontaneous blastogenesis in blood leukocytes and a lower splenocyte response to concanavalin A following proton irradiation (P<0.05). There were no dose rate effects. Collectively, the data demonstrate that the measurements in blood and spleen were largely dependent upon the total dose of proton radiation and that an 80-fold difference in the dose rate was not a significant factor. A difference, however, was found between protons and gamma-rays in the degree of change induced in some of the measurements.

Non-NASA Center↗
NASA NTRS1975

Electrophoretic separator for purifying biologicals

Mathematical expressions were developed to describe the interrelationships between operating requirements (capabilities), cell parameters, and system constraints in terms of design criteria definition. The mathematical model was programmed for computer solution. The model was exercised to identify performance-limiting characteristics, and analyses were conducted to predict operation in space of an experiment involving separation of four components. An engineering model of a flowing electrophoretic separator was constructed. The design is directed toward verifying improvements in resolution and throughput of a thicker cell than can be used on earth.

Source record↗
NASA NTRS1993

Preliminary results: Root cause investigation of orbital anomalies and failures in NASA standard 50 ampere-hour nickel-cadmium batteries

Two lots of NASA standard 50 A.H. Ni-Cd battery cells, manufactured by Gates Aerospace Batteries and built into batteries by McDonnell Douglas, have experienced significant performance problems. The two lots were used on the Compton Gamma Ray Observatory and the Upper Atmosphere Research Satellite. Both of these satellites are Low Earth Orbital (LEO) satellites containing batteries on a parallel bus charged to NASA standard V/T curves using a NASA standard power regulator. The following preliminary conclusions were reached: (1) several plate and cell parameters have migrated within their spec limits over the years (in some cases, from one extreme to the other); (2) several parametric relationships, not generally monitored and therefore not under specification control, have also migrated over the years; (3) many of these changes appear to have taken place as a natural consequence of changes in GE/GAB materials and processes; (4) several of these factors may be 'conspiring' to aggravate known cell failure mechanisms (factors such as heavier plate, less teflon and/or less-uniform teflon, and less electrolyte) but all are still in spec (where specs exist); (5) the weight of the evidence collected to characterize the anomalies and to characterize the negative electrode itself, strongly suggests that alterations to the structure, composition, uniformity, and efficiency of the negative electrode are at the heart of the battery performance problems currently being experienced; and (6) further investigation at all levels (plate, cell, battery, and system) continues to be warranted.

Toft, Mark R.↗
NASA NTRS1994

Investigation of the stability and 1.0 MeV proton radiation resistance of commercially produced hydrogenated amorphous silicon alloy solar cells

The radiation resistance of commercial solar cells fabricated from hydrogenated amorphous silicon alloys is reported. A number of different device structures were irradiated with 1.0 MeV protons. The cells were annealing at 200 C. The annealing time was dependent on proton fluence. Annealing devices for one hour restores cell parameters or fluences below 1(exp 14) cm(exp -2); fluences above 1(exp 14) cm(exp -2) require longer annealing times. A parametric fitting model was used to characterize current mechanisms observed in dark I-V measurements. The current mechanisms were explored with irradiation fluence, and voltage and light soaking times. The thermal generation current density and quality factor increased with proton fluence. Device simulation shows the degradation in cell characteristics may be explained by the reduction of the electric field in the intrinsic layer.

Lord, Kenneth R., II↗
NASA NTRS1995

High Density Memory Based on Quantum Device Technology

We explore the feasibility of ultra-high density memory based on quantum devices. Starting from overall constraints on chip area, power consumption, access speed, and noise margin, we deduce boundaries on single cell parameters such as required operating voltage and standby current. Next, the possible role of quantum devices is examined. Since the most mature quantum device, the resonant tunneling diode (RTD) can easily be integrated vertically, it naturally leads to the issue of 3D integrated memory. We propose a novel method of addressing vertically integrated bistable two-terminal devices, such as resonant tunneling diodes (RTD) and Esaki diodes, that avoids individual physical contacts. The new concept has been demonstrated experimentally in memory cells of field effect transistors (FET's) and stacked RTD's.

vanderWagt, Paul↗
NASA NTRS2000

Is it Possible to have the Similar Unit Cell in Crystals of Different form from the same Macromolecule? (A Case Study of Ribosome Crystals)

Three different types of ribosome crystals were grown by the vapor diffusion technique in hanging drops as described in (1,2). The ribosome is a large asymmetric RNA-protein complex (2.3 million Da), which is protein syntheses machinery of the cell. In this poster we would like to discuss the features of ribosome crystallization. Ribosomes were purified from the thermophilic bacteria Thermus thermophilus by centrifugation (3). Three types of crystals (needle, flat tetragonal and tetragonal-like pyramid) can be grown from the same solution; furthermore, in the same drop using 10-15% 2-methyl-2,4- pentanediol as a precipitant. The crystals appeared in 5-48 hours. The crystals were stable and can co-exist in solution over long period of time. The kinetics of appearance of different crystal forms was different: first the needle crystals were grown, then the tetragonal, and finally the tetragonal pyramids. Later studies of the process of ribosome crystal growth depending on supersaturation showed that low supersaturation results in the appearance of tetragonal plates or tetragonal-like pyramids. An electron microscopy study, together with computer modeling, has shown that crystals of different forms have a high probability of having the same unit cell parameters. According to these experiments the following conclusion can be dranvn: the level of supersaturation of the macromolecule in a crystallizing solution is one of the major factors for forming three-dimensional crystals convenient for X-rays diffraction analysis. From the same macromolecule solution, crystals of different forms can be grown at approximately the same conditions by varying the concentration of macromolecule in the solution. Ion-macromolecule and water-macromolecule interactions, apparently, play the main role in the formation of the unit cell of the crystals.

Karpova, E. A.↗
DOE OSTI2024

Enhanced Hydrogen Evolution Catalysis of Pentlandite due to the Increases in Coordination Number and Sulfur Vacancy during Cubic‐Hexagonal Phase Transition

Abstract The search for new phases is an important direction in materials science. The phase transition of sulfides results in significant changes in catalytic performance, such as MoS 2 and WS 2 . Cubic pentlandite [cPn, (Fe, Ni) 9 S 8 ] can be a functional material in batteries, solar cells, and catalytic fields. However, no report about the material properties of other phases of pentlandite exists. In this study, the unit‐cell parameters of a new phase of pentlandite, sulfur‐vacancy enriched hexagonal pentlandite (hPn), and the phase boundary between cPn and hPn are determined for the first time. Compared to cPn, the hPn shows a high coordination number, more sulfur vacancies, and high conductivity, which result in significantly higher hydrogen evolution performance of hPn than that of cPn and make the non‐nano rock catalyst hPn superior to other most known nanosulfide catalysts. The increase of sulfur vacancies during phase transition provides a new approach to designing functional materials.

Chemistry↗
DOE OSTI2024

Dataset of mechanically induced thermal runaway measurement and severity level on Li-ion batteries

The deployment of Li-ion batteries covers a wide range of energy storage applications, from mobile phones, e-bikes, electric vehicles (EV) and stationary energy storage systems. However, safety issue such as thermal runaway is always one of the most important concerns to prevent Li-ion batteries from further market penetration. A standardized single-side indentation test protocol was developed to mechanically induce an internal short-circuit. The cell voltage, compressive load, indenter stroke, and temperature at the indentation point are measured in time series. The test data of each cell, along with cell parameters such as dimensions, mass, chemistry, state of charge (SOC), capacity, are integrated together to calculate a thermal runaway severity score from 0 to100. Complete data collection process including the original measured record, test method, severity score calculation scheme is presented in this article. The thermal runaway severity analysis and the more than 100 tested Li-ion battery records provide a good data source for further comparison and ranking of thermal runaway risks.

25 ENERGY STORAGE↗
DOE OSTI2025

Magnetic structure evolution of LiFe 1- x Co x PO 4 olivines upon delithiation

We present a comprehensive study of the nuclear and magnetic structures of the mixed olivine solid solution series LiFe 1-x Co x PO 4 as well as their delithiated counterparts, for metal concentrations x = 0.2 - 0.6. Through neutron powder diffraction studies, we find that the LiFe 1-x Co x PO 4 series orders in the magnetic space group Pnma', consistent with their Li(Fe/Co)PO 4 parent structures. After chemical delithiation using peracetic acid, however, the removal of over 30% of the lithium from the lattice results in a transition from an A y -type to an A x -type antiferromagnetic structure. The magnetic space group consistent with A x antiferromagnetism was found to be Pn'm'a'. Interestingly, magnetic susceptibility measurements of both series reveal that delithiation increases the magnetic transition temperature, T N , from 50 K to 115 K. We find through analysis of the diffraction data that the unit cell parameters change linearly as a function of x; consequently, the exchange pathways between the Fe/Co magnetic cations are affected by the delithiation. Here, we discuss how exchange pathways, metal oxidation states, and d-orbital occupation all contribute to the observed magnetic symmetries and trends in T N in both series.

Antiferromagnet↗
DOE OSTI2024

The Curious Case of [AnH(NR 2 ) 3 ] (An = Th, U; R = SiMe 3 ): Two Monomeric Actinide Hydrides Revisited

The reaction of AnCl 4 (DME) x (An = Th, x = 2; An = U, x = 0) with 4 equiv of NaNR 2 (R = SiMe 3 ) in THF at 65 °C results in the formation of [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (An = U, 1; An = Th, 2), and not the reported monomeric actinide hydrides, [AnH(NR 2 ) 3 ], as expected. Furthermore, both complexes 1 and 2 were characterized by X-ray crystallography. Surprisingly, their unit cell parameters are remarkably close to those reported for [AnH(NR 2 ) 3 ], suggesting that the original crystals of [AnH(NR 2 ) 3 ] were, in fact, [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ], but were misidentified. Reduction of 1 with 1.1 equiv of KC 8 in THF, in the presence of 1 equiv of 2.2.2-cryptand, results in the formation of [K(2.2.2-cryptand)][U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (3) in good yield. Likewise, the reaction of 1 with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) results in the formation of the BAC adduct, [(BAC)U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (4), in moderate yield. Finally, the addition of H 2 (10 bar) to 2 in C 6 D 6 at room temperature results in the formation of the targeted monomeric hydride, [ThH(NR 2 ) 3 ], in 32% yield, according to integrations against an internal standard. However, removal of the H 2 atmosphere results in rapid reformation of 2. In contrast, the addition of H 2 (10 bar) to 1 in C 6 D 6 at room temperature results in no apparent reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structure-property relations of oP32-Ge under pressure

The unit-cell parameters, systematic absences, and atomic parameters of the germanium allotrope oP32-Ge show continuous changes up to 6 GPa as shown by single-crystal diffraction analysis. Peak shape and diffuse scattering features remain about unchanged throughout the experiment. Hence, neither the average nor the defect structure behavior offers a structure-property explanation for pressure-induced superconductivity observed at about 2 GPa [1]. Angle dispersive x-ray diffraction reveals a sluggish transformation of oP32-Ge to the Ge-II polymorph, the transition begins around 8 GPa and is complete at 12 GPa, a behavior similar to that of Ge-I. The reconstructive transition was associated with the breakdown of crystals into a powder that was compressed to 32 GPa. Synchrotron infrared absorption measurements up to 8.5 GPa indicate an increase of the band gap of the oP32-Ge prior to its collapse at 8.5 GPa. We suggest that the onset of superconductivity is not associated with a major structural change or that such a change occurs in specific stress and temperature conditions.

Lavina, Barbara↗
DOE OSTI2025

Probing the local structure of Bi 2 O 3 chemical derivatives: the neglected cation sublattice

High-resolution synchrotron X-ray diffraction data confirm the stabilization of the average structure at ambient temperatures as a defect fluorite structure in ternary and quaternary oxides of Bi 2 O 3 , where some Bi cations are replaced with Dy 3+ and/or Er 3+ , Nb 5+ and W 6+ . Rietveld refinement of the diffraction data indicates that when the larger cation Er 3+ (0.89 Å) is replaced with smaller cations W 6+ (0.42 Å) and/or Nb 5+ (0.48 Å), the unit-cell parameter a, based on the relative ionic radii of the substituents, counterintuitively increases. Total scattering data show that the identity of the cation substituent is important in determining the positions of some Bi cations in the defect fluorite structure. Er 3+ and Dy 3+ cations induce monoclinic-like distortions that extend only locally in the Bi 3+ sublattice. X-ray absorption spectroscopy provides evidence that some Dy cations, in the δ phases, prefer to keep a similar local environment to that in the parent Dy 2 O 3 . W cations are found to be predominantly tetrahedrally coordinated in the δ phases explored in this work.

36 MATERIALS SCIENCE↗