Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical calculations, Polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Polar thermospheric Joule heating, and redistribution of recombination energy in the upper mesosphere

Kellogg (1961), suggested that transport of atomic oxygen from the summer into the winter hemisphere and subsequent release of energy by three body recombination, O+O+N2 yields O2+N2+E, may contribute significantly to the so-called mesopause temperature anomaly. Earlier model calculations have shown that Kellogg's mechanism produces about a 10-percent increase in the temperature from summer to winter at 90 km. This process, however, is partly compensated by differential heating from absorption of UV radiation associated with dissociation of O2. In the auroral region of the thermosphere, there is a steady energy dissipation by Joule heating causing a redistribution and depletion of atomic oxygen due to wind-induced diffusion. With the removal of O, latent chemical energy normally released by three body recombination is also removed, and the result is that the temperature decreases by almost 2 percent near 90 km. Through dynamic feedback, this process reduces the depletion of atomic oxygen by about 25 percent and the temperature perturbation in the exosphere from 10 to 7 percent at polar latitudes. Under the influence of the internal dynamo interaction, the prevailing zonal circulation in the upper thermosphere changes direction when the redistribution of recombination energy is considered.

Mayr, H. G.↗
DOE OSTI2020

Deciphering the Solvent Effect for the Solvation Structure of Ca 2+ in Polar Molecular Liquids

Although the crystal structures for many inorganic compounds are readily available, researchers are still working hard to understand the relations between the structures and chemical properties of solutions because most of the chemical reactions take place in solutions. A huge amount of effort has been put toward modeling the ion solvation structure from the perspectives of both experiments and theories. In this study, the solvation structures of Ca 2+ ions in aqueous and alcoholic solutions at different concentrations were carefully evaluated by Ca K-edge X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analyses. Further, density functional theory (DFT) calculations were also performed to correlate the results with the experimental data and then further extended to other similar systems. It was found that the number of coordinating solvent molecules decreases with increasing Ca 2+ concentration and increasing solvent molecule sizes. From the EXAFS data, it was observed that the first solvation shell of Ca 2+ splits into two Ca-O distances in a methanol solution and the counter ion Cl - might also be within the first shell at high concentrations. For the first time, the effects of solvents with different polarities and sizes on the ion solvation environment were systematically evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Neutron diffraction study of magnetism in van der Waals layered MnBi 2n Te 3n+1

Two-dimensional van der Waals MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) compounds have been recently found to be intrinsic magnetic topological insulators rendering quantum anomalous Hall effect and diverse topological states. Here, we summarize and compare the crystal and magnetic structures of this family, and discuss the effects of chemical composition on their magnetism. We found that a considerable fraction of Bi occupies at the Mn sites in MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) while there is no detectable Mn at the non-magnetic atomic sites within the resolution of neutron diffraction experiments. The occupancy of Mn monotonically decreases with the increase of n . The polarized neutron diffraction on the representative MnBi 4 Te 7 reveals that its magnetization density is exclusively accumulated at the Mn site, in good agreement with the results from the unpolarized neutron diffraction. The defects of Bi at the Mn site naturally explain the continuously reduced saturated magnetic moments from n = 1 to n = 4. The experimentally estimated critical exponents of all the compounds generally suggest a three-dimensional character of magnetism. Our work provides material-specified structural parameters that may be useful for band structure calculations to understand the observed topological surface states and for designing quantum magnetic materials through chemical doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Stabilized Synthesis of 2D Verbeekite: Monoclinic PdSe 2 Crystals with High Mobility and In-Plane Optical and Electrical Anisotropy

PdSe 2 has a layered structure with an unusual, puckered Cairo pentagonal tiling. Its atomic bond configuration features planar 4-fold-coordinated Pd atoms and intralayer Se–Se bonds that enable polymorphic phases with distinct electronic and quantum properties, especially when atomically thin. PdSe 2 is conventionally orthorhombic, and direct synthesis of its metastable polymorphic phases is still a challenge. Here, we report an ambient-pressure chemical vapor deposition approach to synthesize metastable monoclinic PdSe 2 . Monoclinic PdSe 2 is shown to be synthesized selectively under Se-deficient conditions that induce Se vacancies. These defects are shown by first-principles density functional theory calculations to reduce the free energy of the metastable monoclinic phase, thereby stabilizing it during synthesis. Further, the structure and composition of the monoclinic PdSe 2 crystals are identified and characterized by scanning transmission electron microscopy imaging, convergent beam electron diffraction, and electron energy loss spectroscopy. Polarized Raman spectroscopy of the monoclinic PdSe 2 flakes reveals their strong in-plane optical anisotropy. Electrical transport measurements show that the monoclinic PdSe 2 exhibits n-type charge carrier conduction with electron mobilities up to ~298 cm 2 V –1 s –1 and a strong in-plane electron mobility anisotropy of ~1.9. The defect-mediated growth pathway identified in this work is promising for phase-selective direct synthesis of other 2D transition metal dichalcogenides.

2D material↗
DOE OSTI2021

Topological band and superconductivity in UTe 2

UTe 2 is a likely spin-triplet superconductor that also exhibits evidence for chiral Majorana edge states. A characteristic structural feature of UTe 2 is inversion-symmetry related pairs of U atoms, forming rungs of ladders. Here we show how each rung's two sublattice degrees of freedom play a key role in understanding the electronic structure and the origin of superconductivity. In particular, DFT + U calculations generically reveal a topological band near the chemical potential originating from a band inversion associated with 5f electrons residing on these rungs, necessitating a microscopic description that includes these rung degrees of freedom. Furthermore, we show that a previously identified strong ferromagnetic interaction within a U-U rung leads to a pseudospin-triplet superconducting state that accounts for a nonzero polar Kerr angle, the observed magnetic field-temperature phase diagrams, and nodal Weyl fermions. Finally, our analysis may also be relevant for other U-based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental and quantum mechanical characterization of an oxygen-bridged plutonium(IV) dimer

We report the synthesis and characterization of K 4 {[PuCl 2 (NO 3 ) 3 ] 2 (μ 2 -O)}·H 2 O, which contains the first known μ 2 -oxo bridge between two Pu IV metal centers. Adding to its uniqueness is the Pu-(μ 2 -O) bond length of 2.04 Å, which is the shortest of other analogous compounds. The Pu-(μ 2 -O)-Pu bridge is characterized by the mixing of s -, d -, and p -orbitals from Pu with the p -orbitals of O; the 5 f -orbitals do not participate in bonding. Natural bond orbital analysis indicates that Pu and O interact through one 3c-2e σ Pu-O-Pu and two 3c-2e π Pu-O-Pu bonding orbitals and that the electron density is highly polarized on the μ 2 -O. Bond topology properties analysis indicates that the Pu-(μ 2 -O) bond shares both ionic and covalent character. Quantum mechanical calculations also show that the dimer has multiconfigurational ground states, where the nonet, septet, quintet, triplet, and singlet are close in energy. This work demonstrates the interplay between experimental and computational efforts that is required to understand the chemical bonding of Pu compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identifying the Molecular Edge Termination of Exfoliated Hexagonal Boron Nitride Nanosheets with Solid-State NMR Spectroscopy and Plane-Wave DFT Calculations

Hexagonal boron nitride nanosheets (h-BNNS), the isoelectronic analog to graphene, have received interest over the past decade due to their high thermal oxidative resistance, high bandgap, catalytic activity, and low cost. The functional groups that terminate boron and nitrogen zigzag and/or armchair edges directly affect their chemical, physical, and electronic properties. However, an understanding of the molecular edge termination present in h-BNNS is lacking. Here, high-resolution magic-angle spinning (MAS) solid-state NMR (SSNMR) spectroscopy, and plane-wave density-functional theory (DFT) calculations are used to determine the molecular edge termination in exfoliated h-BNNS. 1 H → 11 B cross-polarization MAS (CPMAS) SSNMR spectra of h-BNNS revealed multiple hydroxyl/oxygen coordinated boron edge sites that were not detectable in direct excitation experiments. A dynamic nuclear polarization (DNP)-enhanced 1 H → 15 N CPMAS spectrum of h-BNNS displayed four distinct 15 N resonances while a 2D 1 H{ 14 N} dipolar-HMQC spectrum acquired with fast MAS revealed three distinct 14 N environments. Plane-wave DFT calculations were used to construct model edge structures and predict the corresponding 11 B, 14 N and 15 N SSNMR spectra. Comparison of the experimental and predicted SSNMR spectra confirms that zigzag and armchair edges with both amine and boron hydroxide/oxide termination are present. The detailed characterization of h-BNNS molecular edge termination will prove useful for many material science applications. The techniques outlined here should also be applicable to understand the molecular edge terminations in other 2D materials

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Near UV atmospheric absorption measurements from the DC-8 aircraft during the 1987 airborne Antarctic ozone experiment

During the Airborne Antarctic Ozone Experiment from 28 August to 30 September 1987 near UV zenith scattered sky measurements were made over Antarctic from the NASA DC-8 aircraft using a one third m spectrograph equipped with a diode-array detector. Scattered sky light data in the wavelength range 348 nm to 388 nm was spectrally analyzed for O3, NO2, OClO, and BrO column abundances. Slant column abudances of O3, NO2, OClO and BrO were determined, using a computer algorithm of non-linear and linear least square correlation of Antarctic scattered sky spectra to laboratory absorption cross section data. Using measured vertical electrochemical sonde ozone profiles from Palmer, Halley Bay, and the South Pole Stations the slant columns of O3 were converted into vertical column abundances. The vertical column amounts of NO2, OClO, and BrO were derived using vertical profiles calculated by a chemical model appropriate for Antarctica. NO2 vertical column abundances show steep latitudinal decrease with increasing latitude for all 13 flights carried out during the mission. In the regions where NO2 abudances are low, OClO and BrO were observed. The spatial and temporal vertical column abundances of these species are discussed in the context of the chemistry and dynamics in the antarctic polar vortex during the austral spring.

Wahner, A.↗
DOE OSTI2022

Failure analysis of solid oxide fuel cells nickel-yttria stabilized zirconia anode under siloxane contamination

In this study, the failure process of the solid oxide fuel cell (SOFC) Ni-yttria-stabilized zirconia (YSZ) anode is investigated with D4 siloxane (octamethylcyclotetrasiloxane) contamination. In order to evaluate the influence of the electrochemical reaction on the siloxane deposition process, the SOFC experiments were operated at open circuit voltage (OCV) and 50 mA cm -2 conditions at 800°C. During the failure process, electrochemical, morphology and exhaust gas component analysis testing are conducted at the critical points. An equivalent circuit model and corresponding microstructure parameter calculations for separated physicochemical processes were utilized for the quantitative analysis of the failure process. Further, the results confirm the siloxane chemical adsorption deposition mechanism proposed in previous work. As a result, the failure of the anode was attributed to the gas diffusion blockage by dense silicon dioxide layer formation. The anode failure process with siloxane contamination is faster when the anode is operated under polarization.

25 ENERGY STORAGE↗
NASA NTRS1985

The 13C nuclear magnetic resonance in graphite intercalation compounds

The (13)C NMR chemical shifts of graphite intercalation compounds were calculated. For acceptor types, the shifts come mainly from the paramagnetic (Ramsey) intra-atomic terms. They are related to the gross features of the two-dimensional band structures. The calculated anisotropy is about -140 ppm and is independent of the finer details such as charge transfer. For donor types, the carbon 2p pi orbitals are spin-polarized because of mixing with metal conduction electrons, thus there is an additional dipolar contribution which may be correlated with the electronic specific heat. The general agreement with experimental data is satisfactory.

Tsang, T.↗
NASA NTRS1985

C-13 nuclear magnetic resonance in graphite intercalation compounds

The C-13 NMR chemical shifts of graphite intercalation compounds have been calculated. For acceptor types, the shifts come mainly from the paramagnetic (Ramsey) intra-atomic terms. They are related to the gross features of the two-dimensional band structures. The calculated anisotropy is about - 140 ppm and is independent of the finer details such as charge transfer. For donor types, the carbon 2p pi orbitals are spin-polarized because of mixing with metal-conduction electrons, thus there is an additional dipolar contribution which may be correlated with the electronic specific heat. The general agreement with experimental data is satisfactory.

Tsang, T.↗
DOE OSTI2021

Effect of chemical substituents attached to the zwitterion cation on dielectric constant

Materials with high dielectric constant, ε s , are desirable in a wide range of applications including energy storage and actuators. Recently, zwitterionic liquids have been reported to have the largest ε s of any liquid and, thus, have the potential to replace inorganic fillers to modulate the material ε s . Although the large ε s for zwitterionic liquids is attributed to their large molecular dipole, the role of chemical substituents attached to the zwitterion cation on ε s is not fully understood, which is necessary to enhance the performance of soft energy materials. Here, we report the impact of zwitterionic liquid cation chemical substituents on ε s (50 < ε s < 300 at room temperature). Dielectric relaxation spectroscopy reveals that molecular reorientation is the main contributor to the high ε s . The low Kirkwood factor g calculated for zwitterionic liquids (e.g., 0.1–0.2) suggests the tendency for the antiparallel zwitterion dipole alignment expected from the strong electrostatic intermolecular interactions. With octyl cation substituents, the g is decreased due to the formation of hydrophobic-rich domains that restrict molecular reorientation under applied electric fields. In contrast, when zwitterion cations are functionalized with ethylene oxide (EO) segments, g increases due to the EO segments interacting with the cations, allowing more zwitterion rotation in response to the applied field. The reported results suggest that high ε s zwitterionic liquids require a large molecular dipole, compositionally homogeneous liquids (e.g., no aggregation), a maximized zwitterion number density, and a high g, which is achievable by incorporating polar chemical substituents onto the zwitterion cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Anisotropic Excitons Reveal Local Spin Chain Directions in a van der Waals Antiferromagnet

A long‐standing pursuit in materials science is to identify suitable magnetic semiconductors for integrated information storage, processing, and transfer. Van der Waals magnets have brought forth new material candidates for this purpose. Recently, sharp exciton resonances in antiferromagnet NiPS 3 have been reported to correlate with magnetic order, that is, the exciton photoluminescence intensity diminishes above the Néel temperature. Here, it is found that the polarization of maximal exciton emission rotates locally, revealing three possible spin chain directions. This discovery establishes a new understanding of the antiferromagnet order hidden in previous neutron scattering and optical experiments. Furthermore, defect‐bound states are suggested as an alternative exciton formation mechanism that has yet to be explored in NiPS 3 . The supporting evidence includes chemical analysis, excitation power, and thickness dependent photoluminescence and first‐principles calculations. This mechanism for exciton formation is also consistent with the presence of strong phonon side bands. This study shows that anisotropic exciton photoluminescence can be used to read out local spin chain directions in antiferromagnets and realize multi‐functional devices via spin‐photon transduction.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Comparison of in situ aerosol measurements with SAGE 2 and SAM 2 aerosol measurements during the airborne Antarctic ozone experiment

Models indicate that stratospheric aerosols play a major role in the destruction of ozone during the Austral winter. Although many in situ measurements of stratospheric aerosols were made during the Airborne Antarctic Ozone Experiment, changes of aerosol concentration and size distributions across the polar vortex are important to understanding changes of chemical species taking place during this time. Therefore comparing the in situ measurements with measurements made by satellites scanning wider areas will give a clearer picture of the possible role played by aerosols during this period. The wire impactor size distributions are compared to those from the aerosol spectrometers and a best fit size distribution determined. Aerosol extinctions are calculated from the in situ measurements and compared to the extinctions measured by the satellites. Five comparisons are made with SAGE 2 and four with SAM 2. Extinctions agree as close as a factor of two.

Ferry, G. V.↗
DOE OSTI2022

Protein–Ligand Binding Free-Energy Calculations with ARROW–A Purely First-Principles Parameterized Polarizable Force Field

Protein–ligand binding free-energy calculations using molecular dynamics (MD) simulations have emerged as a powerful tool for in silico drug design. Here, we present results obtained with the ARROW force field (FF)–a multipolar polarizable and physics-based model with all parameters fitted entirely to high-level ab initio quantum mechanical (QM) calculations. ARROW has already proven its ability to determine solvation free energy of arbitrary neutral compounds with unprecedented accuracy. The ARROW FF parameterization is now extended to include coverage of all amino acids including charged groups, allowing molecular simulations of a series of protein–ligand systems and prediction of their relative binding free energies. We ensure adequate sampling by applying a novel technique that is based on coupling the Hamiltonian Replica exchange (HREX) with a conformation reservoir generated via potential softening and nonequilibrium MD. ARROW provides predictions with near chemical accuracy (mean absolute error of ~0.5 kcal/mol) for two of the three protein systems studied here (MCL1 and Thrombin). The third protein system (CDK2) reveals the difficulty in accurately describing dimer interaction energies involving polar and charged species. Overall, for all of the three protein systems studied here, ARROW FF predicts relative binding free energies of ligands with a similar accuracy level as leading nonpolarizable force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

The polar stratospheric cloud event of January 24, 1989. I - Microphysics

Rapid adiabatic cooling induced by synoptic forcing led to polar stratospheric cloud (PSC) formation on January 24, 1989, at altitudes sampled by the ER-2 aircraft. Particle characteristics measured by the Forward Scattering Spectrometer Probe (FSSP) on the ER-2 were compared to those calculated using a theoretical PSC microphysics model. Although calculations were sensitive to local changes in cooling rate, generally favorable agreement was found, that in particle surface area being especially important since this parameter dictates heterogeneous chemical rates. The overall model performance suggests that the current approach for simulating Type 1 (nitric acid trihydrate) PSC formation under rapid cooling conditions is well founded and can be used to study the effects of heterogeneous chemistry on stratospheric composition.

Poole, L. R.↗