Binding of calixarene-based Langmuir monolayers to mercury chloride is dependent on the amphiphile structure
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Not Available
Potentiostatic determinations in various mixtures of FeCl2-FeCl3 with excess HCl show rest potentials that are 0.1 V less electropositive than the theoretical values from the formulated ratios of FeII to FeIII (probably as a result of complexing). The standard rate constant sub s. ranges between 0.0001 and 0.000 cm/sec. Tafel slopes b of roughly 0.12V per decade indicate single-electron exchange kinetics. No significant trend in either b or sub s was attributed to mixture composition. The higher sub s. values occurred with and edge-on pyrolytic graphite that had undergone a permanent surface change.
Explore the source record for details and available documents.
The effects of substrates of primary aerobic dehydrogenases, and inorganic phosphate on aerobic INT and CTC reduction in Escherichia coli were examined. In general, INT produced less formazan than CTC, but INT (+) cell counts remained near values of CTC (+) cells. INT and CTC (+) cell numbers were higher than plate counts on R2A medium using succinate, formate, lactate, casamino acids, glucose, glycerol (INT only) and no substrate. Formate resulted in the greatest amount of INT and CTC formazan. Reduction of both INT and CTC was inhibited above 10 mmol l-1 phosphate, and this appeared to be related to decreased rates of O2 consumption. Formation of fluorescent CTC (+), but not INT (+) cells was also inhibited in a concentration dependent manner by phosphate above 10 mmol l-1. From light microscopic observations it appeared CTC formed increasing amounts of poorly or non-fluorescent formazan with increasing phosphate. Therefore, use of phosphate buffer in excess of 10 mmol l-1 may not be appropriate in CTC and INT reduction assays.
A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity—including bond sodium from nuclear fuels—in remote-handled inert-atmosphere environments.
Highlights: • S81A mutant of NpHR lose light-induced photocurrent. • The direction of the Thr126 side chain was fixed by a hydroxyl group of Ser81. • S81A mutation decrease the interaction between Thr126 and a chloride ion. • Ser81 plays a key role in chloride migration. Optogenetic technologies have often been used as tools for neuronal activation or silencing by light. Natronomonas pharaonis halorhodopsin (NpHR) is a light-driven chloride ion pump. Upon light absorption, a chloride ion passes through the cell membrane, which is accompanied by the temporary binding of a chloride ion with Thr126 at binding site-1 (BS1) near the protonated Schiff base in NpHR. However, the mechanism of stabilization of the binding state between a chloride ion and BS1 has not been investigated. Therefore, to identify a key component of the chloride ion transport pathway as well as to acquire dynamic information about the chloride ion-BS1 binding state, we performed a rough analysis of the chloride ion pathway shape followed by molecular dynamics (MD) simulations for both wild-type and mutant NpHR structures. The MD simulations showed that the hydrogen bond between Thr126 and the chloride ion was retained in the wild-type protein, while the chloride ion could not be retained at and tended to leave BS1 in the S81A mutant. We found that the direction of the Thr126 side chain was fixed by a hydroxyl group of Ser81 through a hydrogen bond and that Thr126 bound to a chloride ion in the wild-type protein, while this interaction was lost in the S81A mutant, resulting in rotation of the Thr126 side chain and reduction in the interaction between Thr126 and a chloride ion. To confirm the role of S81, patch clamp recordings were performed using cells expressing NpHR S81A mutant protein. Considered together with the results that the NpHR S81A-expressing cells did not undergo hyperpolarization under light stimulation, our results indicate that Ser81 plays a key role in chloride migration. Our findings might be relevant to ongoing clinical trials using optogenetic gene therapy in blind patients.
Given a growing interest in uranium salts for pyrochemical processing of used fuel and uranium-fueled molten salt reactors, the synthesis of uranium trichloride in alkali-metal chloride media was investigated in a series of four experiments. Specifically, uranium metal powder and uranium hydride powder were prepared and separately blended with ammonium chloride and lithium chloride – potassium chloride eutectic in two runs, while the same powders were separately blended with ammonium chloride and sodium chloride in two additional runs. Each of the lithium chloride – potassium chloride containing blends was slowly heated to 923 K, while those containing sodium chloride were heated to 1123 K. During each heat up, the ammonium chloride sublimed into gaseous ammonia and hydrogen chloride, leading to the chlorination of uranium metal or uranium hydride and the formation of molten salt solutions of the respective chlorides. Experimental conditions were incorporated in the runs to promote formation of uranium trichloride over uranium tetrachloride in the respective media. Molten samples of each run product were taken and characterized via chemical analyses, diffractometry, and microscopy. The final products from each run were dark dense ingots of the respective salt systems with uranium concentrations ranging from 44 to 51 wt%. Finally, chemical analyses and diffractometry identified the predominant presence of uranium trichloride in these systems; however, a possible minor presence of uranium tetrachloride could not be conclusively dismissed.
Given a growing interest in uranium salts for pyrochemical processing of used fuel and uranium-fueled molten salt reactors, the synthesis of uranium trichloride in alkali-metal chloride media was investigated in a series of four experiments. Specifically, uranium metal powder and uranium hydride powder were prepared and separately blended with ammonium chloride and lithium chloride – potassium chloride eutectic in two runs, while the same powders were separately blended with ammonium chloride and sodium chloride in two additional runs. Each of the lithium chloride – potassium chloride containing blends was slowly heated to 923 K, while those containing sodium chloride were heated to 1123 K. During each heat up, the ammonium chloride sublimed into gaseous ammonia and hydrogen chloride, leading to the chlorination of uranium metal or uranium hydride and the formation of molten salt solutions of the respective chlorides. Experimental conditions were incorporated in the runs to promote formation of uranium trichloride over uranium tetrachloride in the respective media. Molten samples of each run product were taken and characterized via chemical analyses, diffractometry, and microscopy. The final products from each run were dark dense ingots of the respective salt systems with uranium concentrations ranging from 44 to 51 wt%. Chemical analyses and diffractometry identified the predominant presence of uranium trichloride in these systems; however, a possible minor presence of uranium tetrachloride could not be conclusively dismissed.
This paper describes an effort to model mechanical strength of closed-cell polyvinyl chloride foams under static loading. The study presented here is a continuation of an earlier study to model elastic stiffness of closed-cell polyvinyl chloride foams as effective transversely isotropic materials. An engineering approach is used in the study and governing equations are developed for predicting the strength of polyvinyl chloride foams. To account for foam microstructure and cell-shape anisotropy on foam strength, a unit cell representation of the polyvinyl chloride foam microstructure is used to derive equations to assess tensile and shear strengths of polyvinyl chloride foams. The differential stretching of polyvinyl chloride foam cell walls (in the rise direction and in the in-plane directions) on the strength of the foam-matrix polymer is also taken into account in modeling the mechanical strength of polyvinyl chloride closed-cell foams. The behavior of closed-cell polyvinyl chloride foams under compression is different from that under tension. In the paper, the equations for predicting compressive strength of closed-cell polyvinyl chloride foams are based on an approximate theory developed in an earlier study of compressive strength of unidirectional composites. The validity of the foam strength predictive equations, derived in the paper, is first demonstrated through comparison of the predictions with the results on Divinycell H (DIAB) foams obtained from a systematic in-house test program. A comparison is also carried out between the strength predictions and the test results published by two polyvinyl chloride foam manufacturers for different density polyvinyl chloride foams. Good agreements are found for all the different density foams studied.
Groundwater recharge on Pahute Mesa was estimated using the chloride mass-balance (CMB) method. This method relies on the conservative properties of chloride to trace its movement from the atmosphere as dry- and wet-deposition through the soil zone and ultimately to the saturated zone. Typically, the CMB method assumes no mixing of groundwater with different chloride concentrations; however, because groundwater is thought to flow into Pahute Mesa from valleys north of Pahute Mesa, groundwater flow rates (i.e., underflow) and chloride concentrations from Kawich Valley and Gold Flat were carefully considered. Precipitation was measured with bulk and tipping-bucket precipitation gauges installed for this study at six sites on Pahute Mesa. These data, along with historical precipitation amounts from gauges on Pahute Mesa and estimates from the PRISM model, were evaluated to estimate mean annual precipitation. Chloride deposition from the atmosphere was estimated by analyzing quarterly samples of wet- and dry-deposition for chloride in the bulk gauges and evaluating chloride wet-deposition amounts measured at other locations by the National Atmospheric Deposition Program. Mean chloride concentrations in groundwater were estimated using data from the UGTA Geochemistry Database, data from other reports, and data from samples collected from emplacement boreholes for this study. Calculations were conducted assuming both no underflow and underflow from Kawich Valley and Gold Flat. Model results estimate recharge to be 30 mm/yr with a standard deviation of 18 mm/yr on Pahute Mesa, for elevations >1800 m amsl. These estimates assume Pahute Mesa recharge mixes completely with underflow from Kawich Valley and Gold Flat. The model assumes that precipitation, chloride concentration in bulk deposition, underflow and its chloride concentration, have been constant over the length of time of recharge.
Efficient hydrolytic depolymerization of crystalline cellulose to sugars is a critical step and has been a major barrier for improved economics in the utilization of cellulosic biomass. We report a novel catalytic system involving paired metal chlorides in an ionic liquid that considerably accelerates the rate of cellulose depolymerization under mild conditions. Paired metal chlorides, consisting of CuCl2 (primary metal chloride) and a second metal chloride, such as CrCl2, PdCl2, CrCl3 or FeCl3 in 1-ethyl-3-methylimidazolium chloride ([EMIM]Cl) solvent were found to substantially accelerate the hydrolytic cleavage of 1,4-glucosidic bonds as compared to known acid-catalyzed hydrolysis in similar temperature range (80-120°C). In contrast, single metal chlorides with the same total molar loading showed much lower activity under similar conditions. Experimental results illustrate the dramatic effect of the second metal chloride in the paired catalytic system. A combination of characterization techniques, including electron paramagnetic resonance (EPR) spectroscopy, differential scanning calorimetry (DSC), X-ray absorption fine structure (XAFS) spectroscopy, and X-ray absorption near edge structure (XANES) spectroscopy, were used to reveal a preliminary understanding of possible mechanisms involved in the paired CuCl2/PdCl2 catalytic system. Results suggest that the C2-proton of the imidazolium ring may be activated by the paired metal-chloride catalysts.
An experimental study is carried out with the aim to understand the interacted mechanism between carbonation and chloride aerosol attack in ordinary Portland cement (OPC) concrete. Effects of carbonation on the chloride profile, the chloride binding capacity and the chloride diffusion coefficient are evaluated. Besides, effect of chloride aerosol attack on the carbonation rate is investigated. Concrete specimens with three water-to-cement ratios (0.38, 0.47 and 0.53) are fabricated in this work. Tested results demonstrate that carbonation remarkably affects the chloride profile, reduces the chloride binding capacity, and also accelerates the rate of chloride ion diffusion of concrete. Besides, the presence of chloride aerosol can lead to lower the carbonation depth and increase the pH value of carbonated concrete. Microscopic properties such as morphology, porosity, and pore size distribution for the contaminated concretes are explored by scanning electron microscope and mercury intrusion porosimetry, which provide strong evidence to these research findings.
A single basic residue above the si-face of the flavin ring is the site of oxygen activation in glucose oxidase (GOX) (His516) and monomeric sarcosine oxidase (MSOX) (Lys265). Crystal structures of both flavoenzymes exhibit a small pocket at the oxygen activation site that might provide a preorganized binding site for superoxide anion, an obligatory intermediate in the two-electron reduction of oxygen. Chloride binds at these polar oxygen activation sites, as judged by solution and structural studies. First, chloride forms spectrally detectable complexes with GOX and MSOX. The protonated form of His516 is required for tight binding of chloride to oxidized GOX and for rapid reaction of reduced GOX with oxygen. Formation of a binary MSOX-chloride complex requires Lys265 and is not observed with Lys265Met. Binding of chloride to MSOX does not affect the binding of a sarcosine analogue (MTA, methylthioactetate) above the re-face of the flavin ring. Definitive evidence is provided by crystal structures determined for a binary MSOX-chloride complex and a ternary MSOX-chloride-MTA complex. Chloride binds in the small pocket at a position otherwise occupied by a water molecule and forms hydrogen bonds to four ligands that are arranged in approximate tetrahedral geometry: Lys265:NZ, Arg49:NH1, and two water molecules, one of which is hydrogen bonded to FAD:N5. The results show that chloride (i) acts as an oxygen surrogate, (ii) is an effective probe of polar oxygen activation sites, and (iii) provides a valuable complementary tool to the xenon gas method that is used to map nonpolar oxygen-binding cavities.
Originally this was planned as a 5 task, 3 year project, starting in May 2019. Task 1 Detecting oxidants and metal corrosion in molten chloride salt at 800°C. Task 2 Effectiveness of Zr getter using head gas sensors of inlet and outlet gases. Task 3 Cathodic protection of metal in molten salt at reducing potential. Task 4 Find reduction potential of metals in molten chloride salts & quantum modeling. Task 5 Develop corrosion test sections integrated into molten salt flow loop. After Q4, the project was scaled back and the reorganized SOPO was reduced to 3 tasks to be completed at the end of Q7 on 01/05/2021. The 3 SOPO tasks are: Task 1 Sense oxidants and the metal corrosion in molten Na-K-Mg-Cl salt at 800°C. Task 3 Cathodically protect H230 alloy in molten Na-K-Mg-Cl salt at 800C by making H230 alloy the cathode of a power supply with a chromium-rich-metal as the anode. Task 4 Find the reduction potential of Cr metal in molten Na-K-Mg-Cl salt at 800°C. The total timeline was reduced from 12 to 7 quarters with the end date being, January 5, 2021. This amounted to task 1,3 and 4 being done in Q5,6 and 7 of an extended year 1, ending on January 5, 2021. Task 1, 3 and 4 were completed. For task1) the increase of oxidants in molten salt is detected by two things: i) a positive shift of the electrode potential for a Haynes 230 alloy (H230) metal coupon versus a silver/silver-chloride reference electrode (SSE) and ii) an increase in the corrosion rate of a H230 electrode at 800C. For task 3) applying a cathodic potential (negative overpotential) to a H230 electrode versus SSE arrested the corrosion of the cathodically protected H230 compared to an unprotected “spectator H230 electrode” in the same molten chloride salt. Lastly, for task 4) the reduction potential of chrome and chrome rich, and nickel metal electrodes were measured. The most valuable outcome of this work is that a power supply can arrest metal corrosion for metal in molten chloride salt when the power supply applies a cathodic potential to bare metal, like H230, in molten chloride salts, like ternary Mg-K-Na-chloride salt. H230 is a high strength metal for containing molten chloride salt and ternary Mg-K-Na-chloride salt is used as heat transfer fluids in concentrating solar power plants. When to use cathodic protection for protecting metal in molten chloride salts? Two scenarios are envisioned: 1) for protecting high-valued components, like solar collectors and heat exchangers and 2) for protecting the bare surface in holidays (point defects) of corrosion inhibitors that are to intended to cover the entire surface of metal.
Decrease of chloride concentration contributes to cardiovascular diseases, however, whether decrease of chloride concentration is involved in platelet activation remains elusive. In the present study, we found that ACI patients had lower serum chloride which would be rescued after Aspirin administration. ADP induced chloride concentration reduction in platelets. Blockade of chloride channel prevented ADP-induced platelet adhesion, activation and aggregation, however, decreasing the extracellular chloride concentration promoted ADP-induced platelet adhesion and activation. Decrease of the extracellular chloride concentration facilitated the inactivation of Src family kinase Lyn, which was not involved in PI3K/Akt phosphorylation. Nevertheless, low chloride concentration promoted the production of platelet cytosol Gαi2 subunit. This subunit prevents AC from converting ATP into cAMP, which therefore, inhibited the phosphorylation of PKA to promote platelet activation. In conclusion, decreased intracellular chloride promotes ADP induced platelet activation through the Gαi2/cAMP/PKA pathway instead of the Lyn/PI3K/Akt signal pathway.
Microbial rhodopsins are versatile and ubiquitous retinal-binding proteins that function as light-driven ion pumps, light-gated ion channels, and photosensors, with potential utility as optogenetic tools for altering membrane potential in target cells. Insights from crystal structures have been central for understanding proton, sodium, and chloride transport mechanisms of microbial rhodopsins. Two of three known groups of anion pumps, the archaeal halorhodopsins (HRs) and bacterial chloride-pumping rhodopsins, have been structurally characterized. Here we report the structure of a representative of a recently discovered third group consisting of cyanobacterial chloride and sulfate ion-pumping rhodopsins, the Mastigocladopsis repens rhodopsin (MastR). Chloride-pumping MastR contains in its ion transport pathway a unique Thr-Ser-Asp (TSD) motif, which is involved in the binding of a chloride ion. The structure reveals that the chloride-binding mode is more similar to HRs than chloride-pumping rhodopsins, but the overall structure most closely resembles bacteriorhodopsin (BR), an archaeal proton pump. The MastR structure shows a trimer arrangement reminiscent of BR-like proton pumps and shows features at the extracellular side more similar to BR than the other chloride pumps. We further solved the structure of the MastR-T74D mutant, which contains a single amino acid replacement in the TSD motif. We provide insights into why this point mutation can convert the MastR chloride pump into a proton pump but cannot in HRs. Our study points at the importance of precise coordination and exact location of the water molecule in the active center of proton pumps, which serves as a bridge for the key proton transfer.