Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chromate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characterization of Contaminants and Mobility in WMA A-AX Boreholes D0006 and D0008

This study was initiated to determine if subsurface contaminants in the A-AX vadose zone at the Hanford site (boreholes D0006 and D0008) caused corrosion of nearby stainless steel well casings (299-E-24-19, 299-E25-46, and 299-E25-236) and, based on the type and distribution of contaminants, determine if contaminants are from one or more sources including a) the A-104 and/or A-105 tanks, b) the 242A evaporator, and c) the 200-E-286 ditch. A tiered approach was used for characterizing contaminants in vadose zone sediments starting with mobile and total contaminant concentrations (Tier 1), characterizing contaminant speciation (Tier 2), and measuring contaminant leaching (Tier 3). Total and mobile contaminant measurements at seven depths showed elevated sulfate and nitrate in all samples (130 to 280 ft depth), elevated chloride in five depths, and no elevated radionuclides except I-129 in D0006 at 206 to 208 ft depth. If these contaminants were initially acidic, stainless-steel corrosion would occur. However, because sediments likely have a high acid neutralization capacity, an acidic spill would have been neutralized within tens of feet, so casing corrosion would likely occur in shallow sediments. GEL labs data also shows low (but above natural) chromate from shallow to 170 ft depth, then higher chromate to 280 ft, suggesting a surface Cr spill or casing corrosion. GEL labs data also showed evidence of more than one plume, with deep nitrate, sulfate, and chloride migration, but only shallow tritium migration. Tritium should migrate nearly unretarded in the subsurface like nitrate and chloride. Elevated aqueous cations and anions in the D0006 206 to 208' depth pore water (SO 4 2- , NO 3 - , Na + , K + , Ca 2+ , Mg 2+ , Si) could be the result of acid disposal and calcite dissolution at shallow depth, with deeper migration of SO 4 2- , NO 3 - from acids and Ca 2+ and Mg 2+ from calcite. Elevated Si (160 mg/L) indicates dissolution of clays or other silicates, which can also occur in acids. Acid extractable metals did show elevated Cr (but not Fe, Ni, Mo, and Mn) above natural levels, which may indicate stainless-steel well corrosion or transport of metals from a shallow spill. The elevated I-129 in D0006 at 206 to 208' depth was low with 0.34 μg/g in pore water and 1.5 μg/g total extractable I-129 in the sediment, which indicates significant fraction of I-129 was bound in one or more precipitates. Although total I-129 was below detection limits in most extractions due to high molybdate interference, I-127 analysis provided some insight into potential precipitate phases. Total I-127 was mainly extracted by acetate or acetic acid (67%), which may be iodine in calcite. Inorganic carbon measurement identified 1.65% calcite, and total organic carbon (TOC) was below detection limits, so iodine was not associated with organic matter. Nearly all the I-127 was present as iodide. In 1-D leach experiments, I-127 as iodide leached from the sediment within 2 pore volumes. Due to high and dynamic molybdate leaching from the sediment and interference with I-129 analysis, there were few quantifiable I-129 measurements. The calculated molybdate release rates from the sediment suggested Mo was being released from the same precipitate phase, such as molybdate incorporated into calcite. Overall, because there was little radioactive contamination measured in D0006 and D0008 boreholes, potential releases from A-104 and A-105 did not reach this location south of the A tank farm. Elevated cations and anions found in D0006 and D0008 at depth as the result of acidic disposal could cause shallow stainless steel casing corrosion. The nearby 242A evaporator generally contained alkaline waste and tritium, but the nearby 200-E-286 ditch generally contained high Cl - liquid effluent, so these are unlikely to be acidic sources.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Assessment of Molybdate Based Corrosion Inhibitor for use at the Savannah River Tank Farm Cooling Water System

The Savannah River Site (SRS) has relied on 51 underground storage tanks, many dating back to the 1950s, to store radioactive liquid waste generated from nuclear processing and radionuclide production. These tanks use carbon steel cooling coils, cooled by soft, acidic water, to dissipate the decayed heat produced by radioactive waste. For decades, following historical industry practices, chromate has been added to the cooling water (~450 ppm at pH 9-11) to effectively inhibit corrosion, ensuring cooling coil longevity. Inspections of failed coils reveal that chromate-treated surfaces are generally well-preserved.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

An Extreme-precision Radial-velocity Pipeline: First Radial Velocities from EXPRES

The EXtreme-PREcision Spectrograph (EXPRES) is an environmentally stabilized, fiber-fed, R = 137,500, optical spectrograph. It was recently commissioned at the 4.3 m Lowell Discovery Telescope near Flagstaff, Arizona. The spectrograph was designed with a target radial-velocity (RV) precision of 30 cm s{sup −1}. In addition to instrumental innovations, the EXPRES pipeline, presented here, is the first on-sky, optical, fiber-fed spectrograph to employ many novel techniques—including an “extended flat” fiber used for wavelength-dependent quantum efficiency characterization of the CCD, a flat-relative optimal extraction algorithm, chromatic barycentric corrections, chromatic calibration offsets, and an ultra-precise laser frequency comb for wavelength calibration. We describe the reduction, calibration, and RV analysis pipeline used for EXPRES and present an example of our current sub-meter-per-second RV measurement precision, which reaches a formal, single-measurement error of 0.3 m s{sup −1} for an observation with a per-pixel signal-to-noise ratio of 250. These velocities yield an orbital solution on the known exoplanet host 51 Peg that matches literature values with a residual rms of 0.895 m s{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Growth and biochemical composition of the carrageenophyte Eucheumatopsis isiformis (Solieriaceae, Rhodophyta) under cultivation at different irradiance levels

Long-term production of a few species of Eucheuma and Kappaphycus from the Indo-Pacific Ocean supports the global carrageenan industry. The widespread use of vegetative propagation has resulted in low genetic diversity among farmed populations, making these crops increasingly vulnerable to diseases and environmental stressors, and resulting in declining yields and reduced biomass production over time. Insufficient efforts to develop and select new native cultivars, combined with the ecological risks posed by introducing nonindigenous species, underscore the urgent need to enhance cultivar diversification in eucheumatoid farming. Eucheumatopsis isiformis , a native carrageenophyte to the Atlantic Ocean, has potential for its cultivation in the Yucatán peninsula, Mexico. This study evaluated the growth and biochemical composition (pigments, elemental C and N, kappa/iota carrageenan ratio) of E. isiformis under different irradiance conditions in an indoor cultivation system. Specimens were collected in a subtidal population in Yucatán, Mexico, characterized, acclimatized to laboratory conditions, and exposed to five irradiance levels (71 ± 10.59 –1014 ± 65.85 µmol quanta m −2 s −1 ; 23.4 °C, salinity 33–34). Growth was measured weekly for six weeks, and elemental C and N content, pigment composition, and the kappa/iota-carrageenan ratio were evaluated. Growth and chromatic photoacclimation to light conditions were observed in all treatments. Highest growth rates (3.1–3.2% day −1 ) were registered between 238 ± 28.3 – 518 ± 44.3 µmol quanta m −2 s −1 , with a predominant iota-type carrageenan (0.97 ± 0.02) observed in all treatments. This study aims to provide guidelines for the successful development of the aquaculture of this carrageenophyte.

FTIR↗
DOE OSTI2021

Lower bounds on circuit depth of the quantum approximate optimization algorithm

The quantum approximate optimization algorithm (QAOA) is a method of approximately solving combinatorial optimization problems. While QAOA is developed to solve a broad class of combinatorial optimization problems, it is not clear which classes of problems are best suited for it. One factor in demonstrating quantum advantage is the relationship between a problem instance and the circuit depth required to implement the QAOA method. As errors in noisy intermediate-scale quantum (NISQ) devices increase exponentially with circuit depth, identifying lower bounds on circuit depth can provide insights into when quantum advantage could be feasible. In this work, we identify how the structure of problem instances can be used to identify lower bounds for circuit depth for each iteration of QAOA and examine the relationship between problem structure and the circuit depth for a variety of combinatorial optimization problems including MaxCut and MaxIndSet. Specifically, we show how to derive a graph, G, that describes a general combinatorial optimization problem and show that the depth of circuit is at least the chromatic index of G. By looking at the scaling of circuit depth, we argue that MaxCut, MaxIndSet, and some instances of vertex covering and Boolean satisfiability problems are suitable for QAOA approaches while knapsack and traveling salesperson problems are not.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

High-performance of CrOx/HZSM-5 catalyst on non-oxidative dehydrogenation of C 2 H 6 to C 2 H 4 : Effect of supporting materials and associated mechanism

Ethane (C 2 H 6 ) is an important inexpensive and widely available fuel resource. High-value use of C 2 H 6 has become increasingly important. Catalytic dehydrogenation of C 2 H 6 to ethylene (C 2 H 4 ) has attracted much attention in recent years due to its high energy efficiency. The direct non-oxidative ethane dehydrogenation (EDH) to ethylene is a promising strategy to produce ethylene and hydrogen at the same time. In this research, Cr/HZSM-5 catalyst with superior stability was synthesized and exhibited an C 2 H 6 converting activity of 1.47 µmol/(g·s) with the corresponding C 2 H 6 conversion and C 2 H 4 selectivity of 37.3% and 90%, respectively. Herein, the synergistic effects of Si and Al in supporting materials were investigated by comparing Cr/HZSM-5 with SBA-15, SiO 2 and Al 2 O 3 supported ones, which contains either Al or Si with different structures. Characterization results indicated that the intimate interactions between Cr and support significantly improved the catalytic performance. The presence of Al in the support promoted the formation of more active Cr 6+ species by forming the aluminum-chromium-chromate (Cr-O-Al) structures which were more efficient to active C-H bond and form (Cr, Al)-OH groups during the reaction. Meanwhile, the formation of internal silanol group with the dissociative adsorbed H* could stabilized the active Cr phase to achieve a stable dehydrogenation activity.

03 NATURAL GAS↗
DOE OSTI2021

Monitoring leaf phenology in moist tropical forests by applying a superpixel-based deep learning method to time-series images of tree canopies

Tropical leaf phenology-particularly its variability at the tree-crown scale-dominates the seasonality of carbon and water fluxes. However, given enormous species diversity, accurate means of monitoring leaf phenology in tropical forests is still lacking. Time series of the Green Chromatic Coordinate (GCC) metric derived from tower-based red-green-blue (RGB) phenocams have been widely used to monitor leaf phenology in temperate forests, but its application in the tropics remains problematic. To improve monitoring of tropical phenology, we explored the use of a deep learning model (i.e. superpixel-based Residual Networks 50, SP-ResNet50) to automatically differentiate leaves from non-leaves in phenocam images and to derive leaf fraction at the tree-crown scale. To evaluate our model, we used a year of data from six phenocams in two contrasting forests in Panama. Here, we first built a comprehensive library of leaf and non-leaf pixels across various acquisition times, exposure conditions and specific phenocams. We then divided this library into training and testing components. We evaluated the model at three levels: 1) superpixel level with a testing set, 2) crown level by comparing the model-derived leaf fractions with those derived using image-specific supervised classification, and 3) temporally using all daily images to assess the diurnal stability of the model-derived leaf fraction. Finally, we compared the model-derived leaf fraction phenology with leaf phenology derived from GCC. Our results show that: 1) the SP-ResNet50 model accurately differentiates leaves from non-leaves (overall accuracy of 93%) and is robust across all three levels of evaluations; 2) the model accurately quantifies leaf fraction phenology across tree-crowns and forest ecosystems; and 3) the combined use of leaf fraction and GCC helps infer the timing of leaf emergence, maturation and senescence, critical information for modeling photosynthetic seasonality of tropical forests. Collectively, this study offers an improved means for automated tropical phenology monitoring using phenocams.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

van der Waals Semiconductor Empowered Vertical Color Sensor

We report biomimetic artificial vision is receiving significant attention nowadays, particularly for the development of neuromorphic electronic devices, artificial intelligence, and microrobotics. Nevertheless, color recognition, the most critical vision function, is missed in the current research due to the difficulty of downscaling of the prevailing color sensing devices. Conventional color sensors typically adopt a lateral color sensing channel layout and consume a large amount of physical space, whereas compact designs suffer from an unsatisfactory color detection accuracy. In this work, we report a van der Waals semiconductor-empowered vertical color sensing structure with the emphasis on compact device profile and precise color recognition capability. More attractive, we endow color sensor hardware with the function of chromatic aberration correction, which can simplify the design of an optical lens system and, in turn, further downscales the artificial vision systems. Also, the dimension of a multiple pixel prototype device in our study confirms the scalability and practical potentials of our developed device architecture toward the above applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Sensor-based phenology from snowmelt experiment gradient, East River, Colorado, 2017 to 2020

The timing of snowmelt is a critical cue for the initiation of growth in mountain meadow ecosystems and can also impact the duration and magnitude of plant production. High frequency observations of species-level phenology are time consuming and require a high degree of expertise, and publicly available remote sensing products lack the necessary temporal resolution to assess fine-scale growing season dynamics. Near-surface sensing methods provide a middle ground with high temporal frequency and tractable spatial scales (from sub-meter to hillslope scale). This data package includes csv files of Normalized Difference Vegetation Index (NDVI) timeseries (SM_NDVI_dailymax.csv) and phenological thresholds (SM_NDVI_summary.csv) for sub-plots (1m2) and Green Chromatic Coordinate (GCC) phenological thresholds (SM_GCC_summary.csv) at the plot scale (10m x 14m). Location IDs associated with this data package are: ER-LM, WG-UM, WG-LS, ER-US, and XX-AL. Related data packages include: “Microclimate observations associated with snowmelt experiment gradient sites, East River, Colorado, 2017 to 2020” and “Colorado Elevation Gradient Snowmelt Manipulation Plant Phenology 2017-2018”.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of the Insoluble Solids of the 241-17F and 241-49H Pump house Water Sample

Six different water samples from 241-17F and 241-49H pump house were analyzed for chemical and physical characteristics as part of efforts to understand recent mechanical seal failures associated with four new cooling water pumps. A focus of this work was characterization of any “as found” insoluble solids. The insoluble material found in the FCRW (F-Area caustic water treated with sodium chromate at 241-17F) sample are mostly magnetite (Fe3O4 or possibly equipment rust) and silica. It was found that 26% of measured FCRW particles have at least one dimension larger than 15 microns. The insoluble particles found in the source water, domestic water (FDW), are mostly kaolin (aluminosilicate) and some iron oxide. All found FDW particles were larger than 15 microns. The insoluble particles of the other source water, FArea well water (FWW), were mostly iron oxide with some trapped cations like calcium. Only 8% of found FWW particles were bigger than 15 microns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structure and Potential–Dependent Selectivity in Redox–Metallopolymers: Electrochemically Mediated Multicomponent Metal Separations

Electro-responsive functional materials can play a critical role in selective metal recovery and recycling due to the need for molecular differentiation between transition metals in complex mixtures. Redox-active metallopolymers are a promising platform for electrochemical separations, offering versatile structural tuning and fast electron transfer. First, through a judicious selection of polymer structure between a main-chain metallopolymer (polyferrocenylsilane) and a pendant-group metallopolymer (polyvinylferrocene), charge-transfer interactions and binding strength toward competing metal ions are tuned, which as a result, dictate selectivity. For example, almost an order of magnitude increase in separation factor between chromate and meta-vanadate can be achieved, depending on polymer structure. Second, these metallopolymer electrodes exhibit potential-dependent selectivity that can even flip ion preference, based solely on electrical means—indicating a control parameter that is orthogonal to structural modifications. Finally, this work presents a framework for evaluating electrochemical separations in multicomponent ion mixtures and elucidates the underlying charge-transfer mechanisms resulting in molecular selectivity through a combination of spectroscopy and electronic structure calculations. Furthermore, the findings demonstrate the applicability of redox-metallopolymers in tailored electrochemical separations for environmental remediation, value-added metal recovery, waste recycling, and even mining processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Control of Host-Matrix Morphology Enables Efficient Deep-Blue Organic Light-Emitting Devices

Mixing a sterically bulky, electron-transporting host material into a conventional single host–guest emissive layer is demonstrated to suppress phase separation of the host matrix while increasing the efficiency and operational lifetime of deep-blue phosphorescent organic light-emitting diodes (PHOLEDs) with chromaticity coordinates of (0.14, 0.15). Here, the bulky host enables homogenous mixing of the molecules comprising the emissive layer while suppressing single host aggregation; a significant loss channel of nonradiative recombination. By controlling the amorphous phase of the host-matrix morphology, the mixed-host device achieves a significant reduction in nonradiative exciton decay, resulting in 120 ± 6% increase in external quantum efficiency relative to an analogous, single-host device. In contrast to single host PHOLEDs where electrons are transported by the host and holes by the dopants, both charge carriers are conducted by the mixed host, reducing the probability of exciton annihilation, thereby doubling of the deep-blue PHOLED operational lifetime. These findings demonstrate that the host matrix morphology affects almost every aspect of PHOLED performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Squeezing a Prism into a Surface: Emulating Bulk Optics with Achromatic Metasurfaces

Metasurfaces promise to replace bulky prisms and lenses with 2D surfaces, revolutionizing wavefront control with technologically significant advantages in size, weight, and planar fabrication. However, conventional implementations suffer from large chromatic aberrations and cannot sustain performance over practical bandwidths of real-world signals because of the limited phase modulation margin available in a surface. How can an infinitely thin surface generate the arbitrarily large, broadband phase delay that bulk phase accumulation can provide? Here, equivalence between bulk optics and certain multiresonant metasurfaces is demonstrated, where phase delay arises from trains of multiple resonances in the effective sheet conductivities of the surface itself instead of accumulation of propagation phase. The fundamentally required electromagnetic surface conductivities of a purely achromatic metasurface are derived and general design rules for arbitrarily broadband beam steering and lensing are obtained. Both operation in transmission and reflection can be achieved in a unified way by proper alignment of the resonances, enabling 360° directionality. The arbitrary spectral bandwidth, dual reflection/transmission operation, and complete dispensability of propagation phase constitute a major advance in the state of the art of achromatic metasurfaces for wavefront manipulation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Realizing Wide-Gamut Human-Centric Display Lighting with K 3 AlP 3 O 9 N:Eu 2+

Abstract Computers, televisions, and smartphones are revolutionized by the invention of InGaN blue light-emitting diode (LED) backlighting. Yet, continual exposure to the intense blue LED emission from these modern displays can cause insomnia and mood disorders. Developing “human-centric” backlighting that uses a violet-emitting LED chip and a trichromatic phosphor mixture to generate color images is one approach that addresses this problem. The challenge is finding a blue-emitting phosphor that possesses a sufficiently small Stokes’ shift to efficiently down-convert violet LED light and produce a narrow blue emission. This work reports a new oxynitride phosphor that meets this demand. K 3 AlP 3 O 9 N:Eu 2+ exhibits an unexpectedly narrow (45 nm, 2206 cm -1 ), thermally robust, and efficient blue photoluminescence upon violet excitation. Computational modeling and temperature-dependent optical property measurements reveal that the narrow emission arises from a rare combination of preferential excitation and site-selective quenching. The resulting chromaticity coordinates of K 3 AlP 3 O 9 N:Eu 2+ lie closer to the vertex of the Rec. 2020 than a blue LED chip and provides access to ≈10% more colors than a commercial tablet when combined with commercial red- and green-emitting phosphors. Alongside the wide gamut, tuning the emission from the violet LED and phosphor blend can reduce blue light emissions to produce next-generation, human-centric displays.

36 MATERIALS SCIENCE↗
DOE OSTI2025

End–to–End Metasurface Design for Temperature Imaging via Broadband Planck‐Radiation Regression

A theoretical framework is presented for temperature imaging from long-wavelength infrared (LWIR) thermal radiation (e.g., 8–12 µm) through the end-to-end design of a metasurface-optics frontend and a computational-reconstruction backend. A new nonlinear reconstruction algorithm, “Planck regression”, is introduced to reconstruct the temperature map from a gray scale sensor image, even in the presence of severe chromatic aberration, by exploiting black body and optical physics particular to thermal imaging. This algorithm is combined with an end-to-end approach that optimizes manufacturable, single-layer metasurfaces to yield the most accurate reconstruction. The designs demonstrate high-quality, noise-robust reconstructions of arbitrary temperature maps (including completely random images) in simulations of an ultra-compact thermal-imaging device. Here, it is also shown that Planck regression is much more generalizable to arbitrary images than a straightforward neural-network reconstruction, which requires a large training set of domain-specific images.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Utility of near‐surface phenology in estimating productivity and evapotranspiration across diverse ecosystems

Abstract Agroecosystems, which include row crops, pasture, and grass and shrub grazing lands, are sensitive to changes in management, weather, and genetics. To better understand how these systems are responding to changes, we need to improve monitoring and modeling carbon and water dynamics. Vegetation Indices (VIs) are commonly used to estimate gross primary productivity (GPP) and evapotranspiration (ET), but these empirical relationships are often location and crop specific. There is a need to evaluate if VIs can be effective and, more general, predictors of ecosystem processes through time and across different agroecosystems. Near‐surface photographic (red‐green‐blue) images from PhenoCam can be used to calculate the VI green chromatic coordinate (G CC ) and offer a pathway to improve understanding of field‐scale relationships between VIs and GPP and ET. We synthesized observations spanning 76 site‐years across 15 agroecosystem sites with PhenoCam G CC and GPP or ET estimates from eddy covariance (EC) to quantify interannual variability (IAV) in the relationship between GPP and ET and G CC across. We uncovered a high degree of variability in the strength and slopes of the G CC ∼ GPP and ET relationships (R 2 = 0.1 ‐ 0.9) within and across production systems. Overall, G CC is a better predictor of GPP than ET (R 2 = 0.64 and 0.54, respectively), performing best in croplands (R 2 = 0.91). Shrub‐dominated systems exhibit the lowest predictive power of G CC for GPP and ET but have less IAV in slope. We propose that PhenoCam estimates of G CC could provide an alternative approach for predictions of ecosystem processes.

Environmental Sciences & Ecology↗
DOE OSTI2025

Omni‐Resonant Imaging Across the Visible

Resonant field enhancement in optical cavities is provided over only narrow linewidths and for specific spatial modes. Consequently, spectrally restrictive planar Fabry-Pérot cavities have not contributed to date to white-light imaging, which necessitates a highly multimoded broadband field to satisfy the resonance condition. It is shown that introducing judicious angular-dispersion circumvents the fundamental trade-off between cavity linewidth and finesse in a Fabry-Pérot cavity by exciting a 130-nm-bandwidth achromatic resonance across the visible spectrum, which far exceeds the finesse-limited linewidth (0.5 nm), and even exceeds the free spectral range (45 nm). This omni-resonant configuration enables broadband color-imaging over a 100-nm-bandwidth in the visible with minimal spherical and chromatic aberrations. Omni-resonant imaging is demonstrated using coherent and incoherent light, and spatially extended and localized fields comprising stationary and moving objects. This work paves the way to harnessing broadband resonant enhancements for spatially structured fields, as needed for example in solar windows.

42 ENGINEERING↗
DOE OSTI2025

The effect of copper additives on hybrid Zr-based chemical conversion coating morphology and chemical compositions

In the realm of corrosion protection, Zr-based conversion coatings offer an environmentally friendly, chromate-free alternative to conventional coating. This study uses advanced X-ray, electron microscopy and electrochemical testing techniques to better understand the impact of varying Cu²⁺ ion concentrations on the characteristics of Zr-based coatings on Fe substrates. Our findings demonstrate that within the tested conditions, higher Cu²⁺ additive concentrations at 40 ppm enhance surface characteristics, increasing stability towards anti-corrosion capability, particularly under NaCl treatment. Conversely, at a lower Cu²⁺ concentration of 20 ppm, coatings exhibited more significant dissolution of Cu clusters and increased vulnerability to chloride-induced degradation. X-ray photoelectron spectroscopy and synchrotron X-ray fluorescence (XRF) and X-ray absorption near edge structure (XANES) spectroscopy analyses revealed Cu²⁺ formation in Cu20, while Cu40 retained its metallic state (Cu⁰) with a slower reaction rate. Cu20 offers some protection but lacks durability, whereas in Cu40, lower I corr , and enhance corrosion resistance, making it ideal for protective coatings in salt-water environments. This study underscores the importance of balancing Cu²⁺ ions concentration in the coating solution to optimize performance, highlighting the role of Cu in enhancing both surface properties and long-term stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗