SEARCH · Search NASA

Results for “Contour method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Estimating Wall-Induced Velocities in Wind Tunnels

Estimates of wall effects in two-dimensional wind tunnel obtained using upwash measurements on two contours near test model. Method derived from combination of prior techniques that correct for wall effects. Improved method limited to flows described by linear equations. Method accurately predicted wall-induced velocities along centerline of theoretical wind tunnel and confirmed that wall adjustments substantially reduced wall interference.

Schairer, E. T.↗

NASA NTRS1985

An atlas of objectively analyzed atmospheric cross sections, 1973-1980

Atmospheric variability over time scales greater than one month is conceptually simplified and readily recognized from vertical cross-sections of zonal-monthly mean data. The reduction to two dimensions, latitude and height, explicitly eliminates all zonal waves but implicity retains their effects on the thermal-pressure fields and the dynamically related zonal wind fields. This atlas contains 96 examples, spanning all latitudes in both the northern and southern hemispheres and two decades in pressure, from 1000 to 10 mb. Four analyses, representing each month from January 1973 through December 1980, depicts the potential virtual temperature, the observed zonal wind velocity, the virtual temperature and the geostrophic zonal wind velocity. Each variable is contoured at a close interval to facilitate visual estimates of stability and vorticity via their gradients. The analyses are generated and contoured by objective computer methods from just one data source: in situ measurements from the conventional rawin-radiosonde system. Although the analyses are independently made at constant pressure levels (the mandatory levels) the cross-sections are drawn with geopotential height as the ordinate. With this ordinate one can observe the seasonal expansion and contraction of the earth's atmosphere, especially that of the polar stratosphere. Also, the quasi-biannual cycle can be identified and studied directly from successive cross-sections.

Goodman, J.↗

NASA NTRS2017

Kepler Planet Detection Metrics: Per-Target Detection Contours for Data Release 25

A necessary input to planet occurrence calculations is an accurate model for the pipeline completeness (Burke et al., 2015). This document describes the use of the Kepler planet occurrence rate products in order to calculate a per-target detection contour for the measured Data Release 25 (DR25) pipeline performance. A per-target detection contour measures for a given combination of orbital period, Porb, and planet radius, Rp, what fraction of transit signals are recoverable by the Kepler pipeline (Twicken et al., 2016; Jenkins et al., 2017). The steps for calculating a detection contour follow the procedure outlined in Burke et al. (2015), but have been updated to provide improved accuracy enabled by the substantially larger database of transit injection and recovery tests that were performed on the final version (i.e., SOC 9.3) of the Kepler pipeline (Christiansen, 2017; Burke Catanzarite, 2017a). In the following sections, we describe the main inputs to the per-target detection contour and provide a worked example of the python software released with this document (Kepler Planet Occurrence Rate Tools KeplerPORTs)1 that illustrates the generation of a detection contour in practice. As background material for this document and its nomenclature, we recommend the reader be familiar with the previous method of calculating a detection contour (Section 2 of Burke et al.,2015), input parameters relevant for describing the data quantity and quality of Kepler targets (Burke Catanzarite, 2017b), and the extensive new transit injection and recovery tests of the Kepler pipeline (Christiansen et al., 2016; Burke Catanzarite, 2017a; Christiansen, 2017).

Planet Detection Metrics↗

NASA NTRS1979

Griffith diffusers

Contoured wall diffusers are designed by using an inverse method. The prescribed wall velocity distribution(s) was taken from the high lift airfoil designed by A. A. Griffith in 1938; therefore, such diffusers are named Griffith diffusers. First the formulation of the inverse problem and the method of solution are outlined. Then the typical contour of a two-dimensional diffuser and velocity distributions across the flow channel at various stations are presented. For a Griffith diffuser to operate as it is designed, boundary layer suction is necessary. Discussion of the percentage of through-flow required to be removed for the purpose of boundary layer control is given. Finally, reference is made to the latest version of a computer program for a two-dimensional diffuser requiring only area ratio, nondimensional length and suction percentage as inputs.

Yang, T.-T.↗

NASA NTRS1993

On Machine Capacitance Dimensional and Surface Profile Measurement System

A program was awarded under the Air Force Machine Tool Sensor Improvements Program Research and Development Announcement to develop and demonstrate the use of a Capacitance Sensor System including Capacitive Non-Contact Analog Probe and a Capacitive Array Dimensional Measurement System to check the dimensions of complex shapes and contours on a machine tool or in an automated inspection cell. The manufacturing of complex shapes and contours and the subsequent verification of those manufactured shapes is fundamental and widespread throughout industry. The critical profile of a gear tooth; the overall shape of a graphite EDM electrode; the contour of a turbine blade in a jet engine; and countless other components in varied applications possess complex shapes that require detailed and complex inspection procedures. Current inspection methods for complex shapes and contours are expensive, time-consuming, and labor intensive.

Resnick, Ralph↗

NASA NTRS1990

Contour-map encoding of shape for early vision

Contour maps provide a general method for recognizing 2-D shapes. All but blank images give rise to such maps, and people are good at recognizing objects and shapes from them. The maps are encoded easily in long feature vectors that are suitable for recognition by an associative memory. These properties of contour maps suggest a role for them in early visual perception. The prevalence of direction sensitive neurons in the visual cortex of mammals supports this view.

Kanerva, Pentti↗

NASA NTRS1994

Analysis and prediction of ocean swell using instrumented buoys

During the period 20-23 September 1990, the remnants of Supertyphoon Flo moved into the central North Pacific Ocean with sustained wind speeds of 28 m/s. The strong wind and large fetch area associated with this storm generated long-period swell that propagated to the west coast of North America. National Data Buoy Center moored-buoy stations, located in a network that ranged from the Gulf of Alaska to the California Bight, provided wave spectral estimates of the swell from this storm. The greatest dominant wave periods measured were approximately 20-25 s, and significant wave heights measured ranged from 3 to 8 m. Wave spectra from an array of three nondirectional buoys are used to find the source of the long-period swell. Directional wave spectra from a heave-pitch-roll buoy are also used to make an independent estimate of the source of the swell. The ridge-line method, using time-frequency contour plots of wave spectral energy density, is used to determine the time of swell generation, which is used with the appropriate surface pressure analysis to infer the swell generation area. The diagnosed sources of the swell are also compared with nowcasts from the Global Spectral Ocean Wave Model of the Fleet Numerical Oceanography Center. A simple method of predicting the propagation of ocean swell, by applying a simple kinematic model of wave propagation to the estimated point and time source, is demonstrated.

Mettlach, Theodore↗

NASA NTRS1990

An automatic gore panel mapping system

The Automatic Gore Mapping System is being developed to reduce the time and labor costs associated with manufacturing the External Tank. The present chem-milling processes and procedures are discussed. The down loading of the simulation of the system has to be performed to verify that the simulation package will translate the simulation code into robot code. Also a simulation of this system has to be programmed for a gantry robot instead of the articulating robot that is presently in the system. It was discovered using the simulation package that the articulation robot cannot reach all the point on some of the panels, therefore when the system is ready for production, a gantry robot will be used. Also a hydrosensor system is being developed to replace the point-to-point contact probe. The hydrosensor will allow the robot to perform a non-contact continuous scan of the panel. It will also provide a faster scan of the panel because it will eliminate the in-and-out movement required for the present end effector. The system software is currently being modified so that the hydrosensor will work with the system. The hydrosensor consists of a Krautkramer-Branson transducer encased in a plexiglass nozzle. The water stream pumped through the nozzle is the couplant for the probe. Also, software is being written so that the robot will have the ability to draw the contour lines on the panel displaying the out-of-tolerance regions. Presently the contour lines can only be displayed on the computer screens. Research is also being performed on improving and automating the method of scribing the panels. Presently the panels are manually scribed with a sharp knife. The use of a low power laser or water jet is being studied as a method of scribing the panels. The contour drawing pen will be replaced with scribing tool and the robot will then move along the contour lines. With these developments the Automatic Gore Mapping Systems will provide a reduction in time and labor costs associated with manufacturing the External Task. The system also has the potential of inspecting other manufactured parts.

Shiver, John D.↗

NASA NTRS1975

Techniques for trajectory optimization using a hybrid computer

The use of a hybrid computer in the solution of trajectory optimization problems is described. The solution technique utilizes the indirect method and requires iterative computation of the initial condition vector of the co-state variables. Convergence of the iteration is assisted by feedback switching and contour modification. A simulation of the method in an on-line updating scheme is presented.

Neely, P. L.↗

NASA NTRS1995

CME masses measured by the HELIOS spacecraft photometers

We have cataloged 160 CMEs detected in the HELIOS 1 and 2 90 deg zodiacal light photometers observed from 1975-1985. The HELIOS 1 and 2 spacecraft orbited from 0.3 to 1.0 AU on 6-month orbits. From the photometer observations of Thomson-scattered light in the inner heliosphere, we have determined CME masses for these events using two methods: (1) by integration over the contours drawn between the three photometers at a given time; and (2) by integration of the mass flow over time past a given photometer. The second method, not readily available using coronagraph observations, is derived from CME speeds measured by using the timing of the peak CME brightness from the 16 deg to 31 deg sets of photometers. The two different HELIOS methods of determining CME mass are consistent with one another for individual CMEs. We find that the CME mass values range from 10(exp 15)g to nearly 10(exp 17)g. We compare the mass distributions of HELIOS-measured CMEs with those from coronagraphs and find that CMEs measured by HELIOS over the same time interval are generally more massive. The solar cycle variation of the total CME mass present in the heliosphere varies by over a factor of approximately 15 from solar minimum to solar maximum. Slightly more massive CMEs carry the bulk of the CME mass during maximum. The total CME mass at solar maximum is found to be near 15% of the total solar wind mass.

Jackson, B. V.↗

NASA NTRS1972

Comparison of characteristic schemes for three-dimensional, steady, isentropic flow.

The accuracy and order of three bicharacteristic schemes based on the numerical method of characteristics for three-dimensional, steady, isentropic, supersonic flow were compared based on numerical calculations. Comparisons were made for source flows and for flows in contoured axisymmetric nozzles. The first two methods were tetrahedral line networks, differing only in the manner in which the cross derivatives were evaluated. The third method was the pentahedral line network proposed by Butler. All three methods were numerically stable and produced efficient and accurate solutions. A discussion of the relative merits and disadvantages of each method is presented.

Cline, M. C.↗

NASA NTRS1991

Mach 4 and Mach 8 axisymmetric nozzles for a shock tunnel

The performance of two axisymmetric nozzles which were designed to produce uniform, parallel flow with nominal Mach numbers of 4 and 8 is examined. A free-piston-driven shock tube was used to supply the nozzle with high-temperature, high-pressure test gas. The inviscid design procedure treated the nozzle expansion in two stages. Close to the nozzle throat, the nozzle wall was specified as conical and the gas flow was treated as a quasi-one-dimensional chemically-reacting flow. At the end of the conical expansion, the gas was assumed to be calorically perfect, and a contoured wall was designed (using method of characteristics) to convert the source flow into a uniform and parallel flow at the end of the nozzle. Performance was assessed by measuring Pitot pressures across the exit plane of the nozzles and, over the range of operating conditions examined, the nozzles produced satisfactory test flows. However, there were flow disturbances in the Mach 8 nozzle flow that persisted for significant times after flow initiation.

Jacobs, P. A.↗

NASA NTRS1991

Mach 4 and Mach 8 axisymmetric nozzles for a high-enthalpy shock tunnel

Jacobs, P. A.↗

NASA NTRS1994

Automated inspection of turbine blades: Challenges and opportunities

Current inspection methods for complex shapes and contours exemplified by aircraft engine turbine blades are expensive, time-consuming and labor intensive. The logistics support of new manufacturing paradigms such as integrated product-process development (IPPD) for current and future engine technology development necessitates high speed, automated inspection of forged and cast jet engine blades, combined with a capability of retaining and retrieving metrology data for process improvements upstream (designer-level) and downstream (end-user facilities) at commercial and military installations. The paper presents the opportunities emerging from a feasibility study conducted using 3-D holographic laser radar in blade inspection. Requisite developments in computing technologies for systems integration of blade inspection in production are also discussed.

Mehta, Manish↗

NASA NTRS2002

A geometric deformable model for echocardiographic image segmentation

Gradient vector flow (GVF), an elegant external force for parametric deformable models, can capture object boundaries from both sides. A new geometric deformable model is proposed that combines GVF and the geodesic active contour model. The level set method is used as the numerical method of this model. The model is applied for echocardiographic image segmentation.

NASA Program Biomedical Research and Countermeasur↗

NASA NTRS1990

Scattering of impact wave by a crack in composite plate

The surface responses due to impact load on an infinite uniaxial graphite/epoxy plate with and without delamination cracks are investigated both in time and frequency domain by using a hybrid method combining the finite element discretization of the near-field with boundary integral representation of the field outside a contour enclosing completely the crack. This combined method leads to a set of linear unsymmetric complex matrix equations which are solved to obtain the response in the frequency domain by biconjugate gradient method. The time domain response is then obtained by using an FFT. In order to capture the time-domain characteristics accurately, high order finite elements have been used. Also, both the six node singular elements and eight node transition elements are used around the crack tips to model the crack-tip singularity. It is shown that from the numerical results for surface responses both depth and length of this crack can be identified.

Ju, T. H.↗

NASA NTRS1982

Digital imaging techniques in experimental stress analysis

Digital imaging techniques are utilized as a measure of surface displacement components in laser speckle metrology. An image scanner which is interfaced to a computer records and stores in memory the laser speckle patterns of an object in a reference and deformed configuration. Subsets of the deformed images are numerically correlated with the references as a measure of surface displacements. Discrete values are determined around a closed contour for plane problems which then become input into a boundary integral equation method in order to calculate surface traction in the contour. Stresses are then calculated within this boundary. The solution procedure is illustrated by a numerical example of a case of uniform tension.

Peters, W. H.↗

NASA NTRS1962

Development of techniques for forming segments of a parabolic solar concentrator

This report covers a comprehensive research study of Androforming, explosive forming, and stretch forming as applied to shaping a parabolic reflector segment for use in a solar furnace. Development efforts were directed toward attaining accurate part contour, and assurance of process reproducibility. The three forming processes mentioned above were investigated by qualified contractors. Three test segments formed by each method along with a detailed analysis were submitted to MSFC. It was concluded that optimum results could be obtained with the stretch forming process. The three test segments of the solar concentrator tha.t were produced by this method, and evaluated optically, revealed a maximum contour deviation of O. 76 degrees.

P.H. Schuerer↗