Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coupling reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Iron Single‐Atom Catalyzed N‐Alkylation of Amines with Alcohols via Solvent‐Free Borrowing Hydrogen Strategy

Abstract Industrial hydrogenation is a pivotal process in chemical synthesis. However, it has significant drawbacks, including high cost, safety risks associated with the use of molecular hydrogen gas, and substantial energy demands due to the need for elevated temperatures and pressures to achieve satisfactory yields. The borrowing hydrogen synthesis, which enables the transfer of hydrogen between molecules, offers a promising approach for green, one‐pot synthesis of industrially important chemicals and intermediates. Despite its potential, the broad application remains limited due to the reliance on toxic solvents, expensive noble metal catalysts, and the still restricted efficiency and substrate scope. In this study, the first solvent‐free strategy for theN‐alkylation of amines with alcohols is presented, employing an N‐doped graphene‐supported Fe single‐atom catalyst (Fe SA @N‐G; 1.06 wt.%). This approach achieves superior conversion and selectivity (up to 99%) along with record values for turnover number (TON, 1032.7) and turnover frequency (TOF, 413.1 h -1 ) for the coupling reaction of aniline with benzyl alcohol, surpassing all previously reported catalysts. DFT calculations, combined with experimental data, elucidated the reaction mechanism and identified the Fe 1 (III)‐N 4 active site participating in Fe‐H hydride transfer and containing two pyrrolic and two pyridinic nitrogens bound to the Fe center. The developed technology is further supported by the catalyst's excellent scalability, reusability, and performance under continuous‐flow conditions. Additionally, the exceptional efficiency of the single‐atom catalyst is demonstrated across more than 50 substrates, including reactions involving both aliphatic and aromatic amines with aliphatic and aromatic alcohols. The industrial applicability of this technology is validated through the synthesis of pharmaceutically relevant compounds, including stimulant drugs, antihistamines, and pharmaceutical intermediates.

Chemistry↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Bromine Assisted MnO 2 Dissolution Chemistry: Toward a Hybrid Flow Battery with Energy Density of over 300 Wh L −1

Abstract Mn 2+ /Mn 3+ redox pair has been considered as a promising cathode for high energy density batteries, due to its attractive features of high redox potential, solubility and outstanding kinetics. However, the disproportionation side reaction of Mn 3+ , which results in accumulation of “dead” MnO 2 limits its reversibility and further energy density. Herein, a novel catholyte based on mixture of Mn 2+ and Br − was proposed for flow batteries with high energy density and long cycle life. In the design, the “dead” MnO 2 can be fully discharged via Br − by a chemical‐electrochemical reaction. Coupled with Cd/Cd 2+ as anode, the assembled Bromine‐Manganese flow battery (BMFB) demonstrates a high energy efficiency of 76 % at 80 mA cm −2 with energy density of 360 Wh L −1 . The battery assembled with silicotungstic acid as anode could continuously run for over 2000 cycles at 80 mA cm −2 . With high power density, energy density and durability, the BMFB shows great potential for large‐scale energy storage.

Chemistry↗
DOE OSTI2023

Facile, Versatile and Stepwise Synthesis of High‐Performance Oligomer Acceptors for Stable Organic Solar Cells

Abstract Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long‐term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri‐Y6‐OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by‐products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri‐Y6‐OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T 80 ) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6‐OD‐based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.

Chemistry↗
DOE OSTI2024

Quantification of Native Lignin Structural Features with Gel–Phase 2D–HSQC 0 Reveals Lignin Structural Changes During Extraction

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature 1 H– 13 C Heteronuclear Single-Quantum Coherence Zero (HSQC 0 ) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration. By combining HSQC 0 measurements with yield measurements following depolymerisation, we can confirm the combinatorial nature of radical coupling reactions during biosynthesis leading to a random sequential organization of linkages within a largely linear lignin chain. Such analyses illustrate how this analytical method can greatly facilitate the study of native lignin structure, which can then be used for fundamental studies or to understand lignin depolymerization methods like reductive catalytic fractionation or aldehyde-assisted fractionation.

09 BIOMASS FUELS↗
DOE OSTI2023

Chemo-Enzymatic Synthesis of Long-Chain Oligosaccharides for Studying Xylan-Modifying Enzymes

Plant research is hampered in several aspects by a lack of pure oligosaccharide samples that closely represent structural features of cell wall glycans. An alternative to purely chemical synthesis to access these oligosaccharides is chemo-enzymatic synthesis using glycosynthases. These enzymes enable the ligation of oligosaccharide donors, when activated for example as α-glycosyl fluorides, with suitable acceptor oligosaccharides. Herein, the synthesis of xylan oligosaccharides up to dodecasaccharides is reported, with glycosynthase-mediated coupling reactions as key steps. The xylo-oligosaccharide donors were protected at the non-reducing end with a 4-O-tetrahydropyranyl (THP) group to prevent polymerization. Installation of an unnatural 3-O-methylether substituent at the reducing end xylose of the oligosaccharides ensured good water solubility. Biochemical assays demonstrated enzymatic activity for the xylan acetyltransferase XOAT1 from Arabidopsis thaliana, xylan arabinofuranosyl-transferase XAT3 enzymes from rice and switchgrass, and the xylan glucuronosyltransferase GUX3 from Arabidopsis thaliana. In case of the glucuronosyltransferase GUX3, MALDI-MS/MS analysis of the reaction product suggested that a single glucuronosyl substituent was installed primarily at the central xylose residues of the dodecasaccharide acceptor, demonstrating the value of long-chain acceptors for assaying biosynthetic glycosyltransferases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into Acetic Acid Binding and Ketene Formation on Anatase TiO 2 (101)

Understanding the adsorption and reactivity of carboxylic acids on oxide surfaces is of great interest in catalysis for biomass upgrading via ketonization, a carbon–carbon coupling reaction. Herein, we investigate the adsorption and reaction of acetic acid on anatase TiO 2 (101) using scanning tunneling microscopy, infrared spectroscopy, temperature programmed reaction, and density functional theory calculations. We demonstrate the adsorption of acetic acid can form two intermediates: (1) dissociated, bidentate acetate with an associated bridging hydroxyl, and (2) molecular, monodentate acetic acid. The coexistence of ordered phases with increasing monolayer (ML) saturation coverages consisting of (1) pure acetate (0.5 ML), (2) mixed acetate/acetic acid (0.67 ML), (3) mixed acetate/acetic acid (1.0 ML) and (4) pure acetic acid demonstrates similar energetics for both acetate and acetic acid species. Under ultra-high vacuum conditions, the presence of both monodentate acetic acid and bidentate acetate was observed below room temperature, while solely bidentate acetate was observed up to 575 K. The deprotonation of acetic acid produces water at 280 K, while the thermal decomposition of bidentate acetate produces ketene and acetic acid at 645 K. In conclusion, this model study provides detailed insight into the stability and reactivity of carboxylic acid surface-bound intermediates, which could participate during ketonization reactions for biomass upgrading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Structural alloys applied at high temperatures rely on an external dense layer of oxide scale for protection. As some reactive alloy components are selectively oxidized internally, understanding how these dispersed metal oxide particles reach the surface to form a protective scale—the so-called internal to external oxidation transition—is crucial for designing these alloys. While the literature is replete with experimental studies on oxidation of alloys, there is a lack of computational studies in this realm due to the complex nature of coupled reaction and diffusion processes in multicomponent multi-phase alloy systems. In this work, we apply a recently developed phase-field model to simulate the oxidation processes under different compositions and nucleation scenarios to gain insights into how a continuous oxide scale can be established. The results show that while alloy composition is critical for internal to external oxidation transition, the oxide nuclei size, shape and distribution also have significant impact on the transition kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Silica-encapsulated Fe 2 O 3 oxygen carriers for selective chemical looping combustion of hydrogen

Methane dehydroaromatization (MDA) combined with chemical looping (CL) combustion of hydrogen can overcome the MDA thermodynamic constraints conventionally limiting conversion. Development of selective hydrogen-oxidation oxygen carriers in the presence of aromatics in the CL is key to improve MDA performance in the coupled reaction system. Here, in this paper, we show that a novel oxygen carrier (silica-encapsulated Fe 2 O 3 with Fe/Si mole ratio of 1.2) yields high overall methane conversion (49%) and aromatics yield (up to 36%) during 4 h of recirculating a stream in the developed system. A silica layer encapsulating Fe 2 O 3 favors hydrogen transport and oxidation, preventing aromatics diffusing to the Fe 2 O 3 surface. A close physical contact between iron oxide particles and silica, and near complete encapsulation of the particles by the silica layer can facilitate hydrogen conversion without full depletion of iron oxides by forming iron silicates. The silica-encapsulated iron oxide particles can be reoxidized in air after depletion of its oxidative capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantitative assessment of environmental phenomena on maximum pit size predictions in marine environments

Maximum pit sizes were predicted for dilute and concentrated NaCl and MgCl 2 solutions as well as sea-salt brine solutions corresponding to 40% relative humidity (RH) (MgCl 2 -rich) and 76% RH (NaCl-rich) at 25 °C. A quantitative method was developed to capture the effects of various cathode evolution phenomena including precipitation and dehydration reactions. Additionally, the sensitivity of the model to input parameters was explored. Despite one's intuition, the highest chloride concentration (roughly 10.3 M Cl – ) did not produce the largest predicted pit size as the ohmic drop was more severe in concentrated MgCl 2 solutions. Therefore, the largest predicted pits were calculated for saturated NaCl (roughly 5 M Cl – ). Next, it was determined that pit size predictions are most sensitive to model input parameters for concentrated brines. However, when the effects of cathodic reactions on brine chemistry are considered, the sensitivity to input parameters is decreased. Although there was not one main input parameter that influenced pit size predictions, two main categories were identified. Under similar chloride concentrations (similar RH), the water layer thickness (WL), and pit stability product, (i · x) sf , are the most influential factors. When varying chloride concentrations (RH), changes in WL, the brine specific cathodic kinetics on the external surface (captured in the equivalent current density (i eq )), and conductivity (k o ) are the most influential parameters. Finally, it was noted that dehydration reactions coupled with precipitation in the cathode will have the largest effect on predicted pit size, and cause the most significant inhibition of corrosion damage.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Elucidating the modes of incorporation of the ferulic acid amides feruloyltyramine and feruloyloctopamine into the lignin-suberin fraction of potato periderms

Ferulic acid amides are naturally present in the cell walls of potato (Solanum tuberosum) periderms. In this study, we investigated their modes of incorporation into the periderm cell wall polymers. A lignin/suberin-enriched fraction was isolated and analyzed by GPC, DFRC, and 2D-NMR. The analyses revealed that the lignin domain of this fraction was predominantly composed of G-lignin units, with an H:G:S ratio of 2:70:28 (S/G ratio of 0.40). More importantly, the data also indicated the presence of two ferulic acid amides, feruloyltyramine and feruloyloctopamine, that are incorporated into the lignin/suberin structure of potato periderms through a variety of linkages, including 8-O-4' and 4-O-beta' ether linkages, as well as 8-5' linkages forming a phenylcoumaran structure involving the ferulate moiety. Although the phenolic groups of the tyramine and octopamine moieties could theoretically undergo oxidation, potentially creating additional sites for radical coupling, our research indicates that these groups remain predominantly as free phenolic entities that do not participate in radical coupling. On the other hand, all the phenolic groups of the ferulate moieties are bound through ether linkages reinforcing the conclusion that the feruloyltyramine and feruloyloctopamine moieties are linked to lignin/suberin within the cell wall via radical coupling reactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

CO as a substrate and inhibitor of H + reduction for the Mo-, V-, and Fe-nitrogenase isozymes

Three known nitrogenase isozymes, Mo-, V-, and Fe-, catalyze biological reduction of dinitrogen (N 2 ) to ammonia (NH 3 ). All three utilize the same reductive elimination mechanism: an intermediate with two metal-bound hydrides reductively-eliminates hydrogen gas (H 2 ) in a reaction coupled to binding and activation of N 2 . Nonetheless, the three isozymes show dramatically different relative rates of H 2 formation and N 2 reduction, revealing important differences in reactivity with substrates. Carbon monoxide (CO) has been characterized as both an inhibitor and substrate for Mo- and V-nitrogenases, but not for the Fe-nitrogenase. In this work, we present a comparative study of the reactivity of the three isozymes with CO, examining CO both as a substrate and as an inhibitor of proton (H + ) reduction under steady-state conditions. For Mo-nitrogenase, there is neither detectable reduction of CO nor inhibition of H + reduction. Fe- and V-nitrogenase show CO reduction and inhibition of H + reduction that depends on the CO partial pressure. For V-nitrogenase, ethylene (C 2 H 4 ) is the major reduction product with a maximum specific activity of ~7.5 nmol C 2 H 4 /nmol VFe protein/min at 1 atm CO. The major product of CO reduction for Fe-nitrogenase is methane (CH 4 ) with a maximum specific activity of ~4.8 nmol CH 4 /nmol FeFe protein/min at 0.05 atm CO. The rate of CH 4 production by Fe-nitrogenase progressively increases to a maximum at 0.05 atm CO and then declines to ~10% with increasing CO partial pressure up to 1 atm. CO does not inhibit proton reduction in Mo-nitrogenase but shows 16% inhibition for V-nitrogenase and 35% for Fe-nitrogenase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High-performance multiblock PEMs containing a highly acidic fluorinated-hydrophilic domain for water electrolysis

The present paper describes the design and evaluation of novel hydrophilic–hydrophobic poly(arylene ether sulfone) (PAES) multiblock copolymers for their synergistic effects upon transport properties and their potential use in proton exchange membrane water electrolysis. The multiblock copolymers are prepared via a coupling reaction between (i) a hydrophilic segment consisting of a disulfonated quinone fluorinated biphenyl group that contains fluorine moieties next to the sulfonated groups to increase the acidity, and (ii) hydrophobic segments composed of non-sulfonated biphenyl sulfone to provide dimensional stability. Two different lengths (molecular weights; 5k and 10k, where k represents 10 3 g mol -1 ) of hydrophobic segments are used to investigate the effects of the membrane properties compared with those of Nafion® and PAES random copolymer (i.e., BPSH40). Atomic force microscopy images of the BPSH40 and multiblock membranes are shown to agree closely with a mesoscale simulation, thus confirming the importance of the morphological effect upon the transport properties. Furthermore, the multiblock copolymer with a higher proportion of hydrophilic segments (10 k–5k) was shown to provide enhanced performance (3.41 A cm -2 at 1.9 V) compared to the multiblock copolymer with equal proportions of hydrophilic and hydrophobic segments (10 k–10 k) due to the greater continuity of nano-sized ionic channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Proton inelastic scattering reveals deformation in 8 He

A measurement of proton inelastic scattering of 8He at 8.25A MeV at TRIUMF shows a resonance at 3.54(6) MeV with a width of 0.89(11) MeV. The energy of the state is in good agreement with coupled cluster and no-core shell model with continuum calculations, with the latter successfully describing the measured resonance width as well. Its differential cross section analyzed with phenomenological collective excitation form factor and microscopic coupled reaction channels framework consistently reveals a large deformation parameter = 0.40(3), consistent with no-core shell model predictions of a large neutron deformation. This deformed double-closed shell at the neutron drip-line opens a new paradigm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Phosphine Ligand Binding and Catalytic Activity of Group 10–14 Heterobimetallic Complexes

We report heterobimetallic complexes have attracted much interest due to their broad range of structures and reactivities as well as unique catalytic abilities. Additionally, these complexes can be utilized as single-source precursors for the synthesis of binary intermetallic compounds. An example is the family of bis(pyridine-2-thiolato)dichloro-germanium and tin complexes of group 10 metals (Pd and Pt). The reactivity of these heterobimetallic complexes is highly tunable through substitution of the group 14 element and the neutral ligand bound to the transition metal. Here, we study the binding energies of three different phosphorous-based ligands, PR 3 (R = Bu, Ph, and OPh) by density functional theory and restricted Hartree–Fock methods. The PR 3 ligand-binding energies follow the trend of PBu 3 > PPh 3 > P(OPh) 3 , in agreement with their sigma-bonding ability. These results are confirmed by ligand exchange experiments monitored with 31 P NMR spectroscopy, in which a weaker binding PR 3 ligand is replaced with a stronger one. Furthermore, we demonstrate that the heterobimetallic complexes are active catalysts in the Negishi coupling reaction, where stronger binding PR 3 ligands inhibit access to an active site at the metal center. Similar strategies could be applied to other complexes to better understand their ligand-binding energetics and predict their reactivity as both precursors and catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Structure–Property Effects in the Generation of Transient Aqueous Benzoic Acid Anhydrides by Carbodiimide Fuels

The design of dissipative systems, which operate out-of-equilibrium by consuming chemical fuels, is difficult. As yet, there are a few examples of privileged fuel chemistries that can be broadly applied in abiotic systems in the same way that ATP hydrolysis is exploited throughout biochemistry. The key issue is that designing nonequilibrium systems is inherently about balancing the relative rates of coupled reactions. The use of carbodiimides as fuels to generate transient aqueous carboxylic anhydrides has recently been used in examples of new nonequilibrium materials and supramolecular assemblies. Here, we explore the kinetics of formation and decomposition of a series of benzoic anhydrides generated from the corresponding acids and EDC under typical conditions (EDC = N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride). The reactions can be described by a simple mechanism that merges known behavior for the two processes independently. Structure–property effects in these systems are dominated by differences in the anhydride decomposition rate. The kinetic parameters allow trends in concentration-dependent properties to be simulated, such as reaction lifetimes, peak anhydride concentrations, and yields. For key properties, there are diminishing returns with the addition of increasing amounts of fuel. These results should provide useful guidelines for the design of functional systems making use of this chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis of Poly(bisisoindigo) Using a Metal-Free Aldol Polymerization for Thin-Film Transistor Applications

Typical syntheses of conjugated polymers rely heavily on organometallic reagents and metal-catalyzed cross-coupling reactions. In this paper, we show that an environmentally benign aldol polymerization can be used to synthesize poly(bisisoindigo), an analog of polyisoindigo with a ring-fused structural repeat unit. Owing to its extended conjugation length, poly(bisisoindigo) absorbs across the UV/vis/NIR spectrum, with an absorption tail that reaches 1000 nm. Due to the four electron-deficient lactam units on each repeat unit, poly(bisoindigo) possesses a low-lying LUMO, which lies at -3.94 eV relative to vacuum. Incorporation of the ring-fused monomer unit also lowered the overall torsional strain in the polymer backbone (relative to polyisoindigo), and the polymer was successfully used in prototype unipolar n-channel organic thin-film transistors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Anthraquinone Flow Battery Reactants with Nonhydrolyzable Water-Solubilizing Chains Introduced via a Generic Cross-Coupling Method

Water-soluble anthraquinones (AQs) hold great promise serving as redox-active species in aqueous organic flow batteries. Systematic investigations into how the properties of redox molecules depend on the water-solubilizing groups (WSGs) and the way in which they are bound to the redox core are, however, still lacking. We introduce WSGs linked to anthraquinone by C=C bonds via a cross-coupling reaction and convert C=C to C–C bonds through hydrogenation. The anthraquinone and the WSGs are connected via (un)branched chains with (un)saturated bonds. We investigate the influence of chains and ionic ending groups on the redox potentials of the molecules and identify three important trends: (1) The electron-withdrawing ending groups can affect the redox potentials of AQs with two unsaturated hydrocarbons on the chains through π-conjugation. (2) For chains with two (un)saturated straight hydrocarbons, WSGs increase the redox potentials of the AQs in the order PO 3 2– < CO 2 – < SO 3 – . (3) AQs with (un)saturated chains at high pH possess desirably low redox potentials, high solubilities, and high stability. Disproportionation leads to the formation of anthrone, which can be regenerated to anthraquinone. Tautomerization results in the saturation of alkene chains, stabilizing the structure. Here, we utilize these observations to identify a potentially low-cost and long-lifetime negative electrolyte that demonstrates a temporal fade rate as low as 0.0128%/day when paired with a potassium ferrocyanide positive electrolyte.

25 ENERGY STORAGE↗