Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cox Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Process sensitivity studies of the Westinghouse sulfur cycle for hydrogen generation

The effect of variations of acid concentration, pressure, and temperature on the thermal process efficiency of the Westinghouse sulfur cycle was examined using the HYDRGN program. Modifications to the original program were made to duplicate the process flowsheet and take into account combined cycle heat-to-work efficiencies for electrochemical work requirements, aqueous solutions, and heat-of-mixing effects. A total of 125 process variations were considered (acid concentration: 50-90 w/o; pressure: 15-750 psia; temperature: 922K - 1366K). The methods of analysis, results, and conclusions are presented.

Carty, R. H.↗
NASA NTRS1976

Radiative cooling of a low-density plasma

The paper extends and improves the radiative cooling coefficient calculations of Cox and Tucker (1969) and Cox and Daltabuit (1971) for a low-density optically thin plasma with no molecules or dust, of cosmic abundances in the range from 10,000 to 100,000,000 K. Earlier rates applied to a plasma containing H, He, C, N, O, Ne, Mg, Si, and S; the present study added Ca, Fe, and Ni. For the elements included, many individual lines are calculated which previously has been averaged together. The cooling processes considered are permitted, forbidden, and semiforbidden line transitions, including contributions from dielectronic recombination and bremsstrahlung, radiative recombination, and two-photon continua. The ionization balance is calculated in collisional equilibrium using an approximate auto-ionization following inner-shell excitation and the low-density limit for the dielectronic recombination rate. Cooling in various observational bands in the soft X-ray region is determined.

Raymond, J. C.↗
NASA NTRS1976

Thermodynamic analysis of alternate energy carriers, hydrogen and chemical heat pipes

The paper discusses the production concept and efficiency of two new energy transmission and storage media intended to overcome the disadvantages of electricity as an overall energy carrier. These media are hydrogen produced by water-splitting and the chemical heat pipe. Hydrogen can be transported or stored, and burned as energy is needed, forming only water and thus obviating pollution problems. The chemical heat pipe envisions a system in which heat is stored as the heat of reaction in chemical species. The thermodynamic analysis of these two methods is discussed in terms of first-law and second-law efficiency. It is concluded that chemical heat pipes offer large advantages over thermochemical hydrogen generation schemes on a first-law efficiency basis except for the degradation of thermal energy in temperature thus providing a source of low-temperature (800 K) heat for process heat applications. On a second-law efficiency basis, hydrogen schemes are superior in that the amount of available work is greater as compared to chemical heat pipes.

Cox, K. E.↗
NASA NTRSDate not supplied

Operational Experience with the Electromagnetic Position Sensor (EPS) for the NASA 6-inch MSBS

A Magnetic Suspension and Balance System (MSBS), originally developed in 1969, has been recommissioned at NASA Langley and is being used to explore dynamic test techniques for planetary entry capsules. A critical component of this system is the Electromagnetic Position Sensor (EPS) which provides non-contact position measurement for control of the actively suspended model. The sensor’s operation is similar to a Linear Variable Differential Transformer (LVDT). However the EPS has a much larger gap and smaller core than traditional LVDTs and therefore it requires specialized driving and processing circuitry. This paper describes the history of this sensor system, its mechanical and electrical design, and the efforts to improve signal conditioning circuitry.

T. D. Schott↗
NASA NTRS1993

Long term trending of engineering data for the Hubble Space Telescope

A major goal in spacecraft engineering analysis is the detection of component failures before the fact. Trending is the process of monitoring subsystem states to discern unusual behaviors. This involves reducing vast amounts of data about a component or subsystem into a form that helps humans discern underlying patterns and correlations. A long term trending system has been developed for the Hubble Space Telescope. Besides processing the data for 988 distinct telemetry measurements each day, it produces plots of 477 important parameters for the entire 24 hours. Daily updates to the trend files also produce 339 thirty day trend plots each month. The total system combines command procedures to control the execution of the C-based data processing program, user-written FORTRAN routines, and commercial off-the-shelf plotting software. This paper includes a discussion the performance of the trending system and of its limitations.

Cox, Ross M.↗
NASA NTRSDate not supplied

Can We Model Forest Demography Globally? Benchmarking of State-of-the-Art Demographic DGVMs

Forests in Dynamic Global Vegetation Models (DGVMs) have historically been simulated as area-averaged plant functional types in each gridcell instead of representing communities of trees of different sizes and ages (demography). Just as the behaviour of a tree differs according to its ontogeny, so the behaviour of forests is known to differ depending on their demography. Accurately simulating demography is therefore key in order to address questions on afforestation and management strategies, as well as assessments of resilience of forests to disturbances such as drought and fire or diversity changes after a disturbance. Ultimately, demography determines the overall forest biomass in natural forests and is a key arbiter of growth and mortality rates. DGVMs are now able to simulate size and age structure of the trees in forests. However, these models have so far not been benchmarked alongside each other. We evaluate 6 DGVMs (BiomeE, CABLE-POP, FATES, LPJ-GUESS, JULES-RED, ORCHIDEE) against observations on regrowth dynamics as well as natural forests at boreal, temperate and tropical sites. We examine whether the models capture observed regrowth dynamics after disturbance, well-known stand size structure and well-established processes such as self-thinning. We outline the planned route forward towards a standardised international benchmarking framework for demographic DGVMs.

Dynamic Global Vegetation Models↗
DOE OSTI2021

SWAT model application for evaluating agricultural conservation practice effectiveness in reducing phosphorous loss from the Western Lake Erie Basin

Lake Erie is threatened by eutrophication and harmful algal blooms due to excess nutrient loading from agricultural sources. Agricultural conservation practices (ACPs) have been developed and implemented to reduce nutrient losses but estimating ACP effectiveness is challenging. The Soil and Water Assessment Tool (SWAT) has been used to investigate ACP effectiveness for water quality improvement. Many SWAT applications have been developed by different investigators to evaluate ACP effectiveness for reducing nutrient, particularly phosphorus (P), loading in the agriculturally-dominated Western Lake Erie Basin (WLEB). Our objective is to establish what has been achieved by past modeling research and make suggestions for future applications and improvements. We synthesized the findings of 28 SWAT modeling studies within the WLEB. Models generally performed satisfactorily against accepted criteria for streamflow and sediment, but performance for P loads, like soluble reactive P, was mostly “unsatisfactory”. The “unsatisfactory” performance maybe due to imperfections and idealizations in model formulations and/or parameterization. Thus, simulations of P transport and transformation processes need improvement. In addition, model parameter selection is the key part of model set-up. Most SWAT modeling studies used default values during initial set-up, then performed calibration and validation. It was found that the calibrated P related parameter values varied widely across different studies, even within the same watershed with some values unrealistic for the study areas. The phenomena of different combinations of model parameters producing similar outputs indicates equifinality. Equifinality in the baseline model may impact results when ACPs are incorporated. Furthermore, the unrealistic values used in ACP assessment undermine the credibility of ACP effectiveness. Future model applications should try to re-examine the calibrated P parameters and make sure they are realistic for the study area as well as reduce equifinality by constraining the model with characterization of watershed conditions, better understanding of hydrologic processes, and parameter values based on real-world observations. As a result, future model applications should focus on improving P transport and transformation processes, using measured watershed characteristics for parameterization, and improving reflections of climate change, which could result in more accurate assessments of ACP effectiveness to meet targeted goals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

GPU Lifetimes on Titan Supercomputer: Survival Analysis and Reliability

George Ostrouchov, Don Maxwell, Rizwan Ashraf, Mallikarjun Shankar, and James Rogers. 2020. GPU Lifetimes on Titan Supercomputer: Survival Analysis and Reliability. In Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis (SC '20). Association for Computing Machinery, New York, NY, USA. Data and code for SC20 paper about Titan GPU reliability analysis: https://github.com/olcf/TitanGPULife. Includes R code to generate graphics for paper and additional analyses. See code/README for instructions. Includes original Titan GPU reliability data on over 100,000 collective hours of operation: data/titan.gpu.history.txt - history data, data/titan.service.txt - service nodes for exclusion. Includes output data files produced by code/TitanGPUmodel.Rmd: data/gc_full.csv - cleaned up data (see paper and R code); data/gc_summary_loc.csv - one record per GPU (variables: SN, time, nlife, nloc, last, col, row, cage, slot, node, max_loc_events, time_max_loc, dbe, dbe_loc, otb, otb_loc, out, batch, days, years, dead, dead_otb, dead_dbe) (see paper and R code). Includes .Rmd analysis document as TitanGPUmode.html. Includes Python code to process data/gc_full.csv into graphics from time-between-failure analyses: See code/tbf-analyses/README for instructions.

42 ENGINEERING↗
NASA NTRS1977

Galactic infall and cosmic ray acceleration

An estimate is made of the extent to which cosmic rays would be accelerated as a result of their scattering off material entering into the galaxy. A model of the flow is presented, and the assumptions on which the applicability of the model depends are examined. As examples, the maximum acceleration efficiencies are calculated for two ratios of disk gas to total pressure. With these results, the upper limit for power supplied by this process is found to be essentially identical to the cosmic ray power requirement. This circumstance suggests the possibility that the infall might contribute appreciably to the cosmic ray acceleration.

Hedrick, D.↗
NASA NTRS1998

Thermal Protection Materials Development

The main portion of this contract year was spent on the development of materials for high temperature applications. In particular, thermal protection materials were constantly tested and evaluated for thermal shock resistance, high-temperature dimensional stability, and tolerance to hostile environmental effects. The analytical laboratory at the Thermal Protection Materials Branch (TPMB), NASA-Ames played an integral part in the process of materials development of high temperature aerospace applications. The materials development focused mainly on the determination of physical and chemical characteristics of specimens from the various research programs.

Selvaduray, Guna↗
DOE OSTI2020

Variable-Speed Pump Efficiency Calculation For Fluid Flow Systems with and without Static Head

To accurately calculate pump energy savings gained from implementing variable frequency drive (VFD) controls, the variation of pump efficiency must be considered when operating conditions transition from the design operating point to new operating points. Many software tools require users to specify the new pump efficiency, or it is assumed to be unchanged. Unfortunately, many users have challenges of estimating the pump efficiency at new operating points. This paper presents a simplified method of estimating centrifugal pump efficiency at new operating speeds when the pump is controlled by a VFD. This methodology applies to systems with and without static head when the system curve is not affected by the change, and also systems where the change in operation changes the system curve.A hypothetical fluid flow system and centrifugal pump were used to demonstrate the calculation process for these scenarios. For this hypothetical system, the pump’s efficiency at new operating points was up to 5.4% lower than the design operating point.

42 ENGINEERING↗
DOE OSTI2024

A shift between mineral and nonmineral sources of iron and sulfur causes proteome-wide changes in Methanosarcina barkeri

ABSTRACT Iron (Fe) and sulfur (S) are required elements for life, and changes in their availability can limit the ecological distribution and function of microorganisms. In anoxic environments, soluble Fe typically exists as ferrous iron [Fe(II)] and S as sulfide (HS − ). These species exhibit a strong affinity that ultimately drives the formation of sedimentary pyrite (FeS 2 ). Recently, paradigm-shifting studies indicate that Fe and S in FeS 2 can be made bioavailable by methanogens through a reductive dissolution process. However, the impact of the utilization of FeS 2 , as opposed to canonical Fe and S sources, on the phenotype of cells is not fully understood. Here, shotgun proteomics was utilized to measure changes in the phenotype of Methanosarcina barkeri MS grown with FeS 2 , Fe(II)/HS − , or Fe(II)/cysteine. Shotgun proteomics tracked 1,019 proteins overall, with 307 observed to change between growth conditions. Functional characterization and pathway analyses revealed these changes to be systemic and largely tangential to Fe/S metabolism. As a final step, the proteomics data were viewed with respect to previously collected transcriptomics data to deepen the analysis. Presented here is evidence that M. barkeri adopts distinct phenotypes to exploit specific sources of Fe and S in its environment. This is supported by observed protein abundance changes across broad categories of cellular biology. DNA adjacent metabolism, central carbon metabolism methanogenesis, metal trafficking, quorum sensing, and porphyrin biosynthesis pathways are all features in the phenotypic differentiation. Differences in trace metal availability attributed to complexation with HS − , either as a component of the growth medium [Fe(II)/HS − ] or generated through reduction of FeS 2 , were likely a major factor underpinning these phenotypic differences. IMPORTANCE The methanogenic archaeon Methanosarcina barkeri holds great potential for industrial bio-mining and energy generation technologies. Much of the biochemistry of this microbe is poorly understood, and its characterization will provide a glimpse into biological processes that evolved close to life’s origin. The discovery of its ability to extract iron and sulfur from bulk, solid-phase minerals shifted a longstanding paradigm that these elements were inaccessible to biological systems. The full elucidation of this process has the potential to help scientists and engineers extract valuable metals from low-grade ore and mine waste generating energy in the form of methane while doing so.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2014

Tailoring Enterprise Systems Engineering Policy for Project Scale and Complexity

Space systems are characterized by varying degrees of scale and complexity. Accordingly, cost-effective implementation of systems engineering also varies depending on scale and complexity. Recognizing that systems engineering and integration happen everywhere and at all levels of a given system and that the life cycle is an integrated process necessary to mature a design, the National Aeronautic and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) has developed a suite of customized implementation approaches based on project scale and complexity. While it may be argued that a top-level system engineering process is common to and indeed desirable across an enterprise for all space systems, implementation of that top-level process and the associated products developed as a result differ from system to system. The implementation approaches used for developing a scientific instrument necessarily differ from those used for a space station. .

Cox, Renee I.↗
NASA NTRS1999

Representation and Integration of Scientific Information

The objective of this Joint Research Interchange with NASA-Ames was to investigate how the Tsimmis technology could be used to represent and integrate scientific information. The funding allowed us to work with researchers within NAS at the NASA Ames Research Center, to understand their information needs, and to work with them on integration strategies. Most organizations have a need to access and integrate information from multiple, disparate information sources that may include both structured as well as semi-structured information. At Stanford we have been working on an information integration project called Tsimmis, supported by DARPA. The main goal of the Tsimmis project is to allow a decision maker to find information of interest from such sources, fuse it, and process it (e.g., summarize it, visualize it, discover trends). Another important goal is the easy incorporation of new sources, as well the ability of deal with sources whose structure or services evolve. During the Interchange we had research meetings approximately every month or two. The participants from NASA included Michael Cox and Peter Vanderbilt. The Stanford PI, and various students and Stanford staff members also participated. NASA researchers also participated in some of our regular Tsimmis meetings. As planned, our meetings discussed problems and solutions to various information integration problems.

Source record↗
NASA NTRS2000

Measurement and Modeling of Steep Ocean Wave Slopes

Our study emphasizes the importance of identifying and quantifying the distribution variance, skewness and kurtosis from optical and microwave scattering observations. Recent field measurements of the sea slope distribution for intermediate-to-long scale gravity waves will be presented. These data were collected using an airborne laser range system designed to estimate the surface slope vector at horizontal scales of 1-2 m. The observed slope distribution tail indicates that the occurrence of steep waves substantially exceeds a Gaussian prediction. This measured peakedness is present over the wide range of sea state and wind speed conditions encountered. Data are further evaluated within the context of Cox and Munk's well-known sea slope investigations. Based on a re-evaluation of the Cox and Munk's reported parameters, we find a consistent picture develops wherein data are shown to consistently indicate non-Gaussian statistics. One fundamental application of such a non-Gaussian slope observation is its place in modifying predicted wave breaking probability to help to better quantify gas transfer processes at the sea surface.

Chapron, B.↗
DOE OSTI2021

Renewable Thermal Energy Systems Designed for Industrial Process Solutions in Multiple Industries

The need for renewable heat in industry is vital for the next decade and beyond. Industrial decarbonization is a key area that must be accelerated, to foster the removal of fossil fuels from the provision of heat, especially at low temperatures. This paper looks at the development and results of case studies for understanding the economics and potential for renewable thermal energy systems (RTES), particularly in hybrid configurations to provide industrial process heat (IPH). For the case studies, these include non-concentrating e.g., heat pumps, and concentrating collectors e.g., parabolic trough collectors and direct steam generation (DSG)-linear Fresnel collectors (LFCs). The results show that a levelized cost of heat (LCOH) of $6-$8 per million British Thermal Units (MMBTU) is possible, depending on the direct normal irradiance (DNI) and the system sizing e.g., to increase the solar fractions. In Arizona for example, with a DNI of 7.36 kWh/m2/day, the base case for the DSG-LFC system with 6hrs of thermal energy storage could potentially meet a 1 MWth load 80% of the year.

concentrated solar thermal↗
NASA NTRS1990

Degradation mechanisms of selected hydrochlorofluorocarbons in the atmosphere: An assessment of the current knowledge

Volatile organic compounds are mainly degraded in the troposphere by attack of OH with abstraction of H atoms or addition to unsaturated linkages. The chlorofluorocarbons (CFC's) do not contain these reactive sites and consequently cannot be degraded in this way in the lower atmosphere. This results in pollution of the stratosphere by these molecules and attendant problems for ozone. The proposed replacements for CFC's, the hydrochlorofluorocarbons (HCFC's), and hydrofluorocarbons (HFC's), contain at least one hydrogen atom in the molecule, which confers on these compounds a greater sensitivity toward oxidation by OH in the troposphere and in the lower stratosphere, resulting in much shorter atmospheric lifetimes than the CFC's. Consequently, the Ozone Depletion Potential and the Atmospheric Warming Potential are reduced substantially compared to the CFC's. All the possible degradation processes of the HCFC's and HFC's proposed to replace the CFC's are examined with the principal aim of identifying chlorine- and fluorine-containing products which are stable under tropospheric conditions.

Cox, Richard A.↗