Search NASA⌕ Search

SEARCH · Search NASA

Results for “Critical Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Development Of A Novel Genetic Algorithm-based Optimization Method For Design Of Nuclear Criticality Experiments

A new evaluation of isotopic molybdenum total neutron cross section data based on measurements performed at Rensselaer Polytechnic Institute prompted researchers at Rensselaer and Los Alamos National Laboratory (LANL) to design a nuclear criticality experiment for the validation of the data. A novel approach of criticality experiment design employing a genetic algorithm-based optimization technique was developed. The method produced a critical experiment with a cross section sensitivity that exceeded target specifications by an order of magnitude.

59 BASIC BIOLOGICAL SCIENCES↗

Design of UO 2 -BeO Critical Experiment at Sandia [Poster]

The purpose of this proposal is to design a new integral critical experiment to investigate the effects of beryllium oxide and high assay low-enriched uranium fuels. this proposal considers using several existing resources at Sandia: (1) the Critical Experiments (SCX) facility and water tank, (2) spare UO 2 -BeO fuel for the Annular Core Research Reactor (ACRR), and 7uPCX fuel rods from previous benchmark experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determination of Critical Experiment Correlations for Experiments Involving Arrays of Low-Enriched Fuel Rods

Quantifying correlations among critical experiments has become a topic of interest over the last 10–15 years. Correlations arise from the shared use of fissile material, nonfissile materials, fixtures, and procedures in multiple experiments or multiple experiment series. A Monte Carlo sampling technique proposed as a viable technical method to evaluate these correlations has been implemented in the SCALE 6.2 Sampler sequence. This paper presents an investigation of the use of this new tool and technique for low-enriched uranium pin array experiments with a thermal neutron energy spectrum. The Nuclear Energy Agency’s Expert Group on Uncertainty Analyses for Criticality Safety Assessments has been examining methods of calculating the correlation coefficients among experiments from the LCT-007 and LCT-039 series. Results for two scenarios are presented to demonstrate the impact of pin pitch uncertainty modeling on the correlation coefficients. The convergence of the correlation coefficients is also investigated. Additional studies examine the impact of the stochastic uncertainty and the use of continuous-energy Monte Carlo for individual realizations on the correlation coefficients. Correlation coefficients are also determined for the LCT-042 experiment series. This experiment series differs from other experiments because unique poison panels and fuel array separation distances may reduce correlation of the individual experiments within the series. The effects of pin pitch uncertainty and stochastic uncertainty are also examined for this series. Comparing the results of the two sets of experiments shows potential conclusions that can be drawn regarding viability of the Monte Carlo sampling technique for determining critical experiment correlations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Designing Critical Experiments Using Gaussian Process Optimization

New nuclear applications may lack similarity between the application and existing ICSBEP benchmarks. Without accurate benchmark data, predictive simulations will have high uncertainty in the estimate of a parameter of interest (such as k eff ). The design of critical experiments tuned for specific applications of interest is one solution to reducing uncertainty in the necessarily nuclear data. We propose an optimization technique to design critical experiments that match the cross-section sensitivities of an application model while minimizing the number of simulation runs in the optimization. The optimization of a critical experiment is slow because the potential design space covers many qualitative variables (types of material and geometries) and corresponding quantitative variables (e.g., material dimensions) and the evaluation of any specific design requires running an expensive code like MCNP1 and Whisper. The optimization of expensive black-box computer codes with quantitative variables has been extensively explored in the literature of design of computer experiments. We propose a modified version of standard Gaussian process (GP) optimization that optimizes over multiple discrete configurations of qualitative variables in parallel which reduces the computational cost of the entire optimization. The goal of this work is to minimize the number of MCNP evaluations while still exploring many different design configurations in parallel.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

National Criticality Experiments Research Center (NCERC) [Slides]

The National Criticality Experiments Research Center (NCERC) is a general-purpose critical assembly facility located within the Device Assembly Facility at the Nevada National Security Site. The NCERC is operated by Los Alamos National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Design of a Critical Experiment to Validate Yttrium Hydride at Varying Temperatures

As microreactors become an emerging nuclear energy source for remote applications, designers are looking at the use of high temperature moderator material to reduce the fuel mass in the core by up to a factor of two. The microreactor community is in constant search of the best moderator material to retain hydrogen at high temperatures while optimizing neutronic performance. Recent simulation work has shown that materials which have a high and low Z component are optimal for this application. Material properties studies have further shown that yttrium hydride maintains hydrogen and stays as a solid until well over the needed temperatures, and thus retains hydrogen. A critical experiment is planned at the National Criticality Experiments Research Center (NCERC) to test the reactivity behavior of yttrium hydride at standard and elevated temperatures.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

National Criticality Experiments Research Center (NCERC) - capabilities and recent measurements

The National Criticality Experiments Research Center (NCERC) located at the Device Assembly Facility (DAF) at the Nevada National Security Site (NNSS) and operated by Los Alamos National Laboratory (LANL) is home to four critical assemblies which are used to support of range of missions, including nuclear criticality safety and nuclear nonproliferation. Additionally, subcritical systems can also be assembled at NCERC. NCERC is providing critical and subcritical experiments valuable to the nuclear data community and experiments performed at NCERC are often published as benchmarks in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. This manuscript will give a broad overview of recent experiments performed at NCERC, upcoming experiments, and why integral measurements are important and useful to the nuclear data community. The four critical assemblies are GODIVA IV, FLATTOP, COMET, and PLANET. GODIVA IV is a cylindrical metal fast burst reactor, the fourth in the GODIVA series that dates back to the 1950’s. FLATTOP is an highly enriched uranium (HEU) or Pu core reflected by natural uranium. COMET and PLANET are vertical lift assemblies, where one half of the reactor can be lifted to the upper half of the reactor to create a critical system. Some recent experiments include various critical intermediate energy assemblies with lead, and subcritical measurements of plutonium reflected by copper, tungsten, and nickel. Work is also underway to make a better measurement of the critical mass of neptunium, using a neptunium sphere surrounded by nickel shells. Additionally, measurements will be performed next year with HEU shells from Rocky Flats. These HEU shells will be stacked together to make larger systems, allowing for a large range of criticality (from subcritical to delayed critical). Other upcoming measurements include an HEU critical assembly sensitive to intermediate energy neutrons.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Validation of MVP code with HTC critical experiments

In the 1980's, a series of high burnups critical experiments (HTC) was conducted at the Apparatus B experimental facility in Valduc with the support of the IRSN and AREVA NC. Four series of experiments were designed to assess profit associated with actinide-only burn-up credit in the criticality safety analysis for fuel handling (Phases 1 and 2), pool storage (Phase 3) and spent fuel cask (Phase 4) conditions. The HTC rods, specifically fabricated for the experiments, were designed to simulate a typical pressurized water reactor uranium oxide spent fuel. In order to validate the MVP-2.0 code and relatively new nuclear data libraries for the criticality safety analysis, the HTC critical experiments were analyzed using the MVP-2.0 code with JENDL-4.0, ENDF/B-VII.1 or JEFF-3.2. The effective neutron multiplication factor k{sub eff} values were obtained through analyses of all phases of the HTC experiments. It was shown that averaged values of k{sub eff} using JENDL-4.0 and ENDF/B-VII.1 were in good agreement with experimental results for all the phases, while those using JEFF-3.2 showed slight underestimation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of Critical Experiments Involving Graphite elements at the IPEN/MB-01 Plate-Type Core

A series of critical experiments were designed involving the use of characterized graphite elements in the new plate-type core of the IPEN/MB-01 reactor. Eleven configurations with different graphite quantities are considered, each producing distinct effects on neutron fluxes and offering opportunities to analyze varying sensitivities to k eff in the system. The analysis shows that the experiments can be performed with acceptably low k eff uncertainties considering an adequate characterization of the graphite elements to be used. The sensitivity results obtained using SCALE TSUNAMI calculations show that the experiments have a notable k eff sensitivity coefficient to graphite. In the configurations tested, the k eff sensitivity to graphite TSL is low. This experiment will be useful for criticality safety validation of applications using uranium fuel enriched to around 19.75 wt % 235 U, light water and graphite. It will also be useful to gain more insight into graphite material properties and their effect on k eff as a result of using the well-characterized graphite elements. The execution of the experiments is planned for the summer of 2025. The 11 designed configurations serve as a basis for the final design, and fewer configurations will be executed. Once executed, these critical experiments will be evaluated and submitted for publication in the International Criticality Safety Benchmark Evaluation Project Handbook, supporting the DOE/NRC Collaboration for Criticality Safety Support for Commercial-Scale HALEU for Fuel Cycles and Transportation project goal.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity-based Experiment Design Optimization for a Molybdenum Critical Experiment

A lack of intermediate molybdenum benchmarks in the ICSBEP has been identified by LANL, Y-12, and IRSN. This lacking adversely effects criticality safety operations and leaves new differential molybdenum data unvalidated. NCERC is proposing a series of intermediate integral experiments to better the understanding of molybdenum systems. Using MCNP6.2 with the ENDF/B-VIII.0 nuclear data library a single unmoderated and four moderated system designs were identified using a sensitivity optimization method. Each proposed system was found to be at least twice as sensitive to the 95 Mo capture cross section in the URR as the sole existing intermediate molybdenum benchmark in the ISCBEP handbook. The addition of a new molybdenum sensitive intermediate system would improve future nuclear data evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Prompt Fission Uranium Neutron Spectrum (PFUNS) Experiment: Critical Configurations and Irradiations

The objective of the Prompt Fission Uranium Neutron Spectrum (PFUNS) experiment is to reduce the uncertainty of the Prompt Fission Neutron Spectrum (PFNS) of 235 U above 8 MeV. The experiment was performed at the DOE National Criticality Experiments Research Center (NCERC) at the Nevada National Security Site. To meet the experiment objective, activation foils were placed in a central void region of a critical configuration consisting of concentric highly enriched uranium (HEU) metal hemishells. The set of activation foils were chosen based on threshold reactions to neutron energies across the fission spectrum, but especially those in the high energy tail of the fission spectrum. PFUNS was performed on the Planet critical assembly machine at NCERC and uses the Rocky Flats (RF) HEU hemishells. PFUNS has similarities to the Measurement of Uranium Subcritical and Critical (MUSiC) experiment conducted at NCERC in 2021, which also used RF hemishells, but contains a large central cavity to allow for a sample plate to be inserted. This large void means that much more HEU is needed to achieve a critical configuration (108 kg for PFUNS versus 59 kg for MUSiC). This work describes the 2024 experiment execution of four critical configurations and two irradiations for the PFUNS project.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

IER 537: CERBERUS – Copper Critical Experiment Design [Slides]

This document details the CERBERUS copper critical experiment design process, including information on preliminary design criteria, case analysis, and experiment designs. Future work is anticipated and includes the creation of a more detailed model, additional investigation regarding varying interstitial material thickness and varying Cu reflector thickness, cost analysis, and down select to final set of configurations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hybrid Particle Swarm-Interpolation Algorithm for Improved Critical Experiment Design

The typical goal of designing a critical experiment is twofold: a system that is both critical and optimized for some other value. This value could be an energy-integrated sensitivity, percent fissions in a certain energy range, or some other value that can be calculated by a transport code. By simulating different combinations of reflector, moderator, and fuel thicknesses a designer can identify such a desirable configuration. The domain of all possible combinations of these thicknesses is referred to as the experiment search space. As more dimensions are added, the search space increases in size exponentially. For a three-dimensional case, which includes three thickness values between zero and ten centimeters to the nearest tenth of a millimeter, a total of 1,000 3 , configurations exists. Rather than check each configuration individually, which would be extremely computationally expensive, it has been shown to be more efficient to use a conventional particle swarm optimization (PSO) algorithm to identify critical and optimal configurations. This work presents the theory and implementation of a novel hybrid PSO interpolation algorithm to perform these optimizations faster than a conventional PSO algorithm. To demonstrate this, an example optimization will be carried out by the conventional and hybrid PSO algorithms and their performances will be compared.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Completion of Critical Experiments with Molybdenum Sleeves at Sandia

Sandia National Laboratories (SNL) and the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) have collaborated on the design and execution of a set of critical experiments that explore the effects of molybdenum in water moderated fuel-rod arrays. The molybdenum is included as sleeves (tubes) on some of the fuel rods in the arrays. The fuel used in the experiments is known at Sandia as the Seven Percent Critical Experiment (7uPCX) fuel. This fuel has been used is several published benchmark evaluations in including LEU-COMP-THERM-78 and LEU-COMP THERM-080.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Critical Experiment Design Phase 2 Report for Integral Request 441

This report documents the second phase of critical experiment design (CED-2) conducted as part of integral experiment request (IER) 441. The purpose of IER-441 is to develop a capability to test the epithermal/intermediate cross sections of materials at the Sandia National Laboratories’ (SNL’s) critical experiment facility using low-enriched uranium oxide fuel. This effort determined that the capability can be achieved using a varying number of test samples in a central test region of a hexagonally pitched lattice driven with a more moderated exterior region. The hollow test region can be changed to either contain a pure aluminum wall or a wall that incorporates a cadmium thermal flux filter. This report documents the development of final anticipated critical configurations using tantalum as the test sample material. Using the anticipated critical configurations, estimates of the experimental uncertainties and sensitivities of materials are performed in keeping with the CEdT process. A list of the new hardware necessary to perform the experiment is included.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Determination of critical experiment correlations for experiments involving arrays of low-enriched fuel rods

Quantifying correlations among critical experiments has become a topic of interest over the last 10-15 years. Correlations arise from the shared use of fissile material, non-fissile materials, fixtures, and procedures in multiple experiments or multiple experiment series. A Monte-Carlo sampling technique proposed as a viable technical method to evaluate these correlations has been implemented in the SCALE 6.2 Sampler sequence. This paper presents an investigation of the use of this new tool and technique for low-enriched uranium pin array experiments with a thermal neutron energy spectrum. The Nuclear Energy Agency's Expert Group on Uncertainty Analyses for Criticality Safety Assessments has been examining methods of calculating the correlation coefficients among experiments from the LCT-007 and LCT-039 series. Results for two scenarios are presented to demonstrate the impact of pin pitch uncertainty modeling on the correlation coefficients. The convergence of the correlation coefficients is also investigated. Additional studies examine the impact of the stochastic uncertainty and the use of continuous-energy Monte-Carlo for individual realizations on the correlation coefficients. Correlation coefficients are also determined for the LCT-042 experiment series. This experiment series differs from other experiments because unique poison panels and fuel array separation distances may reduce correlation of the individual experiments within the series. The effects of pin pitch uncertainty and stochastic uncertainty are also examined for this series. Comparing the results of the two sets of experiments shows potential conclusions that can be drawn regarding viability of the Monte-Carlo sampling technique for determining critical experiment correlations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Critical Experiment Training at Sandia National Laboratories [Slides]

This presentation on critical experiment training at sandia national laboratories includes an overview of four different experiments that are analyzed in depth. Additionally, a description of the experiment process is provided in each section.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗