Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cu formate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Multi-Year Characterization of PSCs Using Solar Occultation Satellite Observations

POAM solar occultation observations from1994 to present are studied for the purpose of determining Type I PSC formation characteristics and winter-long evolution. This information is critical to an improved understanding and predictive capability of stratospheric ozone depletion. Solar occultation satellite observations of these clouds yields more continuous and wide-spread information than can be obtained from aircraft, balloon, or ground-based observations. This multi-winter PSC study is augmented by the use of our Type Ia/Ib discrimination scheme. Recent studies of PSC formation made with POAM observations and simulations during the 1999-2000 Arctic winter have shown characteristics that shed light on the formation mechanisms responsible for Type Ia solid phase PSCs. This study examines PSC observations from many years on a common basis to see if the characteristics observed & cuing the 1999-2000 Arctic winter ai-e observed in other years and if other characteristics can be identified. The results show that Type Ia PSCs form at the beginning of the winter, within several days of the fxst drop in temperature below TNAT, and peak early in the winter. Type Ia PSCs typically outnumber Ib PSCs over the winter, especially at the beginning of the winter. Type Ia and Ib PSC observations continue throughout the winter. Micro-physical models of PSC formation must match these observed characteristics. Some models predict that temperatures must be more 5 K below T-NAT for five days before significant freezing can occur. This is not seen in the POAM observations. Differences in PSC characte ristics between the first two Arctic winters (1 994- 1995 and 1995- 1 996) and later winters also suggest the influence of volcanic perturb ations on PSC formation. Type Ia and Ib PSC characteristics observed by POAM III and SAGE III for the 2002-2003 Arctic winter are compared.

Strawa, A. W.↗
NASA NTRS1983

Interaction of metal ions and amino acids - Possible mechanisms for the adsorption of amino acids on homoionic smectite clays

A semiempirical molecular orbital method is used to characterize the binding of amino acids to hexahydrated Cu(2+) and Ni(2+), a process presumed to occur when they are adsorbed in the interlamellar space of homoionic smectite clays. Five alpha-amino acids, beta-alanine, and gamma-aminobutyric acid were used to investigate the metal ion and amino acid specificity in binding. It was assumed that the alpha, beta, and gamma-amino acids would bind as bidentate anionic ligands, forming either 1:1 or 1:2 six-coordinated five, six, and seven-membered-ring chelate complexes, respectively. Energies of complex formation, optimized geometries, and electron and spin distribution were determined; and steric constraints of binding of the amino acids to the ion-exchanged cations in the interlamellar spacing of a clay were examined. Results indicate that hexahydrated Cu(2+) forms more stable complexes than hexahydrated Ni(2+) with all the amino acids studied. However, among these amino acids, complex formation does not favor the adsorption of the biological subset. Calculated energetics of complex formation and steric constraints are shown to predict that 1:1 rather than 1:2 metal-amino acid complexes are generally favored in the clay.

Gupta, A.↗
NASA NTRS2006

Active Metal Brazing and Characterization of Brazed Joints in Titanium to Carbon-Carbon Composites

The Ti-metal/C-C composite joints were formed by reactive brazing with three commercial brazes, namely, Cu-ABA, TiCuNi, and TiCuSiI. The joint microstructures were examined using optical microscopy and scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS). The results of the microstructure analysis indicate solute redistribution across the joint and possible metallurgical bond formation via interdiffusion, which led to good wetting and spreading. A tube-on-plate tensile test was used to evaluate joint strength of Ti-tube/ C-C composite joints. The load-carrying ability was greatest for the Cu-ABA braze joint structures. This system appeared to have the best braze spreading which resulted in a larger braze/C-C composite bonded area compared to the other two braze materials. Also, joint loadcarrying ability was found to be higher for joint structures where the fiber tows in the outer ply of the C-C composite were aligned perpendicular to the tube axis when compared to the case where fiber tows were aligned parallel to the tube axis.

Singh, M.↗
NASA NTRS1992

Energetics and structural properties of twist grain boundaries in Cu

Structural and energetics properties of atoms near a grain boundary are of great importance from theoretical and experimental standpoints. From various experimental work it is concluded that diffusion at low temperatures at polycrystalline materials take place near grain boundary. Experimental and theoretical results also indicate changes of up to 70 percent in physical properties near a grain boundary. The Embedded Atom Method (EAM) calculations on structural properties of Au twist grain boundaries are in quite good agreement with their experimental counterparts. The EAM is believed to predict reliable values for the single vacancy formation energy as well as migration energy. However, it is not clear whether the EAM functions which are fitted to the bulk properties of a perfect crystalline solid can produce reliable results on grain boundaries. One of the objectives of this work is to construct the EAM functions for Cu and use them in conjunction with the molecular static simulation to study structures and energetics of atoms near twist grain boundaries in Cu. This provides tests of the EAM functions near a grain boundary. In particular, we determine structure, single vacancy formation energy, migration energy, single vacancy activation energy, and interlayer spacing as a function of distance from grain boundary. Our results are compared with the available experimental and theoretical results from grain boundaries and bulk.

Karimi, Majid↗
NASA NTRS1977

In situ oxidation studies on /001/ copper-nickel alloy thin films

High-resolution transmission electron microscopy studies are reported of (001)-oriented single crystalline thin films of Cu-3%Ni, Cu-4.6%Ni, and Cu-50%Ni alloy which were prepared by vapor deposition onto (001) NaCl substrates and subsequently annealed at around 1100 K and oxidized at 725 K at low oxygen partial pressure. At all alloy concentrations, Cu2O and NiO nucleated and grew independently without the formation of mixed oxides. The shape and growth rates of Cu2O nuclei were similar to rates found earlier. For low-nickel alloy concentrations, the NiO nuclei were larger and the number density of NiO was less than that of Cu-50%Ni films for which the shape and growth rates of NiO were identical to those for pure nickel films. Phenomena involving a reduced induction period, surface precipitation, and through-thickness growth are also described. The results are consistent with previously established oxidation mechanisms for pure copper and pure nickel films.

Heinemann, K.↗
NASA NTRS1995

Bulk Properties of Ni3Al(gamma') With Cu and Au Additions

The BFS method for alloys is applied to the study of 200 alloys obtained from adding Cu and Au impurities to a Ni3Al matrix. We analyze the trends in the bulk properties of these alloys (heat of formation, lattice parameter, and bulk modulus) and detect specific alloy compositions for which these quantities have particular values. A detailed analysis of the atomic interactions that lead to the preferred ordering patterns is presented.

Bozzolo, Guillermo↗
NASA NTRS1986

On the interpretation of the beta(sub p) relation in interstellar clouds

Troland and Heiles (1986) have recently presented an updated compilation of observational data concerning the relationship between the interstellar magnetic field strength B and the gas density rho (or, equivalently, the particle density n). One of the main findings of their survey was that B remains constant over the density range 0.1 - approx. 100 cu. cm and shows evidence for increase only a higher densities. They compared this result with theoretical predictions based on the Parker-instability scenario for the formation and evolution of interstellar clouds in the presence of the galactic magnetic field. In this picture, low-density gas is driven by the magnetic Rayleigh-Taylor instability into magnetic valleys, where it accumulates into denser concentrations. The gas initially flows along the magnetic field lines and there is little increase of the field strength with density; B only starts to rise when n becomes large enough for self-gravity to begin competing with the magnetic stresses. For a cloud mass of approx. 1,000 sub M and the measured background field strength, the critical density for contraction in approx. 75 cu. cm. Troland and Heiles therefore concluded that this scenario is basically consistent with the observations. This conclusion is debated.

Koenigl, A.↗
NASA NTRS1980

An ICR study of ion-molecule reactions in the C2H2/HCN system

Using the ICR technique, rate constants are obtained for the reaction of C2H2(+) with HCN and of HCN(+) with C2H2. They are, respectively, 3.6 x 10 to the -10 cu cm/molecule-s and 6.9 x 10 to the -10 cu cm/molecule-s. Discrepancies between these results and other measurements of the first reaction are discussed. The relevance of this reaction to the formation of HC3N in interstellar clouds is considered.

Mcewan, M. J.↗
NASA NTRS1992

Reaction layer formation at the graphite/copper-chromium alloy interface

Sessile drop tests were used to obtain information about copper chromium alloys that suitably wet graphite. Characterization of graphite/copper-chromium alloy interfaces subjected to elevated temperatures were conducted using scanning electron micrography, energy dispersive spectroscopy, auger electron spectroscopy, and x ray diffraction analyses. These analyses indicate that during sessile drop tests conducted at 1130 C for one hour, copper alloys containing greater than 0.98 percent chromium form continuous reaction layers of approximately 10 micron thickness. The reaction layers adhere to the graphite surface. The copper wets the reaction layer to form a contact angle of 60 degrees or less. X ray diffraction results indicate that the reaction layer is chromium carbide. The kinetics of reaction layer formation were modelled in terms of bulk diffusion mechanisms. Reaction layer thickness is controlled initially by the diffusion of Cr out of Cu alloy and later by the diffusion of C through chromium carbide.

Devincent, Sandra M.↗
NASA NTRS1993

Reaction layer formation at the graphite/copper-chromium alloy interface

Sessile drop tests were used to obtain information about copper chromium alloys that suitably wet graphite. Characterization of graphite/copper-chromium alloy interfaces subjected to elevated temperatures were conducted using scanning electron micrography, energy dispersive spectroscopy, Auger electron spectroscopy, and X-ray diffraction analyses. These analyses indicate that during sessile drop tests conducted at 1130 C for one hour, copper alloys containing greater than 0.98 percent chromium form continuous reaction layers of approximately 10 micron thickness. The reaction layers adhere to the graphite surface. The copper wets the reaction layer to form a contact angle of 60 degrees or less. X-ray diffraction results indicate that the reaction layer is chromium carbide. The kinetics of reaction layer formation were modelled in terms of bulk diffusion mechanisms. Reaction layer thickness is controlled initially by the diffusion of Cr out of Cu alloy and later by the diffusion of C through chromium carbide.

Devincent, Sandra M.↗
NASA NTRS2014

Unusual Microtopography on an Apollo 12 Soil Grain

We have observed the presence of a previously undescribed microtopography in several regions on the surface of a lunar grain from Apollo regolith sample 12070,29. This microtopography consists of flattened triangular prisms, henceforth referred to as denticles, set in an orderly arrangement. We propose three possible processes to describe the presence of these structures: (1) radiation; (2) aqueous activity; or (3) impact. Radiation—the surface of the Earth’s moon is subject to energetic ion and photon irradiation which can produce a multitude of morphological effects on grain surfaces including erosion/sputtering, vesicle formation, and amorphization of crystalline phases. Under certain conditions surface erosion can result in the formation of well-ordered nanostructures including mounds, dots, wave-shaped, rippled or corrugated features typically <10s nm in size and organized into pattered arrays. However larger pyramid-shaped features up to approx. 300 nm at the base, similar in shape to lunar denticles, were produced on Cu substrates ex-posed to ion beam sputtering.. Aqueous alteration—recent reports of purported water on the Moon imply the possibility of brief, limited exposure of surface materials to aqueous fluids. Aqueous corrosion of silicates can result in the formation of crystallographically controlled denticulated features, up to 10s of micron at the base, arranged in a patterned formation. Impact—the surface of the moon is impacted by meteorites, particularly by micron-size particles, resulting in the formation of a variety of crater types. While it is difficult to envision a scenario in which a patterned array could be formed by impact, fracturing along planes of crystallographic structural weakness due to external stress could explain these features.

Thomas-Keprta, K. L.↗
NASA NTRS2000

Effects of Conformal Coat on Tin Whisker Growth

A whisker from a tin plated part was blamed for the loss of a commercial spacecraft in 1998. Although pure tin finishes are prohibited by NASA, tin plated parts, such as hybrids, relays and commercial off the shelf (COTS) parts, are something discovered to have been installed in NASA spacecraft. Invariably, the assumption is that a conformal coat will prevent the growth of, or short circuits caused by, tin whiskers. This study measures the effect a Uralane coating has on the initiation and growth of tin whiskers, on the ability of this coating to prevent a tin whisker from emerging from the coating, and on the ability to prevent shorting. A sample of fourteen brass substrates (1 inch by 4 inches by 1/16 inch) were plated by two separate processes: half of the specimens were 'bright' tin plated directly over the brass substrate and half received a copper flash over the brass substrate prior to 'bright' tin plating. Each specimen was coated on one half of the substrate with three bi-directional sprays of Uralane 5750 to a nominal thickness of 25 to 75 micrometers (1 to 3 mils). Several specimens of both types, Cu and non-Cu flashed, were placed in an oven maintained at 50 C as others' work suggests that this is the optimal temperature for whisker formation. The remaining specimens were maintained at room ambient conditions. The surfaces of each specimen have been regularly inspected using both optical (15 to 400x power) and Scanning Electronic Microscopy (SEM). Many types of growths, including needle-like whiskers, first appeared approximately three months after plating on the non-conformally coated sides of all specimens. At four months, 4 to 5 times more growth sites were observed on the coated side; however, the density of growth sites on the non-conformally coated side has since increased rapidly, and now, at one year, is about the same for both sides. The density of growth sites is estimated at 90/sq mm with 30 percent of the sites growing whiskers (needle-like forms) with the potential to cause short circuit bridging. The average growth rate of the needle-like whiskers on the non-conformally coated areas is about 130 micrometers per year with some outliers reaching 800 micrometers after one year. It is more difficult to make growth measurements under the conformal coat. As yet no whiskers have been observed to penetrate through the coating surface, however, a number of tin nodules appear on the verge of breaking through the thinner regions of the coating surface. These domes are developing sharper and sharper tips, as if a growing whisker is about to push its way through a tough skin. Our observations are that the specimens with copper flash show a much lower density of nucleation sites and significantly slower whisker growth compared to the specimens that have only bright tin plating over brass. The specimens kept at room temperature have a higher whisker density than those stored at 50 C. This is an unexpected result and does not agree with the published findings of others. All of the whiskers originate from small surface defects (thin, tiny scratches) that appear over the entire surface of each specimen.

Kadesch, Jong S.↗
NASA NTRS2001

Effects of via-conductor geometry in the electromigration failure of Al:Cu wires

Electromigration (EM) experiments conducted using two types of via/plug to conductor alignment indicate a geometrical dependence of electromigration failure in Al:Cu conductors. The resistance vs time curves show distinctive steps when the alignment is parallel. This is explained by a successive loss of conductivity through the plug due to void formation. In the perpendicular via/conductor arrangement, resistance increases by smaller and closely spaced steps. EM experiments without vias, found that the conductor life under stress increases by at least an order of magnitude. Kinetic studies at four temperatures between 180-240 C found activation energies to be 1.0 plus or minus 0.1eV.

Al:Cu accelerated testing electromigration activat↗
NASA NTRS1986

Rate constant for the reaction SO + BrO yields SO2 + Br

The rate of the radical-radical reaction SO + BrO yields SO2 + Br has been determined at 298 K in a discharge flow system near 1 torr pressure with detection of SO and BrO via collision-free sampling mass spectrometry. The rate constant was determined using two different methods: measuring the decay of SO radicals in the presence of an excess of BrO and measuring the decay of BrO radicals in excess SO. The results from the two methods are in reasonable agreement and the simple mean of the two values gives the recommended rate constant at 298 K, k = (5.7 + or - 2.0) x 10 to the -11th cu cm/s. This represents the first determination of this rate constant and it is consistent with a previously derived lower limit based on SO2 formation. Comparison is made with other radical-radical reactions involving SO or BrO. The reaction SO + BrO yields SO2 + Br is of interest for models of the upper atmosphere of the earth and provides a potential coupling between atmospheric sulfur and bromine chemistry.

Brunning, J.↗
NASA NTRS1990

Role of the methylene amidogen (H2CN) radical in the atmospheres of Titan and Jupiter

The methylene amidogen (H2CN) radical can be shown to be an important intermediate in models for the formation of HCN (via N + CH3) and the recombination of H to H2 (via H + HCN) on Titan as well as in models for the formation of HCN (via NH2 + C2H3) in the atmosphere of Jupiter. Experiments in our laboratory in a discharge flow system with mass spectrometric detection of both reactants and products have established that the major product channel (90 percent for the reaction N + CH3 is that leading to H2CN + H. The same result was obtained for N + CD3 yields D2CN + D. The rate constant for the reaction D + D2CN yields DCN + D2 was measured for the first time and k(298 K) greater than 7 x 10(exp -11) cu cm/s was found. The same result was obtained for the H atom reaction. This is the final step in the reaction sequence leading to HCN on both Titan and Jupiter and to formation of H2 from H on Titan. The first measurement of the ionization potentials for H2CN and D2CN was also made. From electron impact studies I.P. = (9.6 + or - 1.0) eV was obtained for both radicals. An upperlimit of I.P. less than 11.6 eV came from observations of the H2CN radical by photoionization mass spectrometry using an Ar resonance lamp (106.7 nm). Further photoionization experiments are planned using synchrotron radiation plus monochromator as a tunable vacuum UV light source.

Nesbitt, F. L.↗
NASA NTRS1999

Surface Segregation in Multicomponent Systems: Modeling of Surface Alloys and Alloy Surfaces

The study of surface segregation, although of great technological importance, has been largely restricted to experimental work due to limitations associated with theoretical methods. However, recent improvements in both first-particle and semi-empirical methods are opening, the doors to an array of new possibilities for surface scientists. We apply one of these techniques, the Bozzolo, Ferrante and Smith (BFS) method for alloys, which is particularly suitable for complex systems, to several aspects of the computational modeling of surfaces and segregation, including alloy surface segregation, structure and composition of alloy surfaces, and the formation of surface alloys. We conclude with the study of complex NiAl-based binary, ternary and quaternary thin films (with Ti, Cr and Cu additions to NiAl). Differences and similarities between bulk and surface compositions are discussed, illustrated by the results of Monte Carlo simulations. For some binary and ternary cases, the theoretical predictions are compared to experimental results, highlighting the accuracy and value of this developing theoretical tool.

Bozzolo, Guillermo↗
NASA NTRS1991

Recombination of N4(+) ions with electrons

Using a modified high-pressure-afterglow/mass spectrometer apparatus similar to that described by Lee and Johnsen (1989), spectroscopic observations of afterglow helium plasmas, with N2 as a minor additive, were carried out in order to verify the mechanism suggested by Bates (1991) for dissociative recombination of electrons with N4(+) ions. It was found that dissociative recombination of electrons with N4(+) ions results in the formation of N2 molecules in the C 3Pi(u) (v = 0,1) state, with the recombination rate coefficient of (2.6 +/- 0.3) x 10 exp -6 cu cm/sec at 300 K.

Cao, Y. S.↗
NASA NTRS1992

Chloryl nitrate - A novel product of the OClO + NO3 + M recombination

The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10 exp -14 cu cm/molecule s in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.

Friedl, Randall R.↗