Search NASA⌕ Search

SEARCH · Search NASA

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Enhanced Density-of-States Effective Mass and Strained Endotaxial Nanostructures in Sb-Doped Pb 0.97 Cd 0.03 Te Thermoelectric Alloys

Here we report that CdTe alloying and Sb doping increase the density-of-states effective mass and introduce endotaxial nanostructuring in n-type PbTe, resulting in enhanced thermoelectric performance. A prior theoretical prediction for the presence of resonance states in the conduction band of this system, however, could not be confirmed. An amount of 3 mol % CdTe alloying widens the band gap of PbTe by 50%, leading to enhanced carrier effective mass and Seebeck coefficient. This effect is even more pronounced at high temperatures where the solubility of CdTe increases. At 800 K, when the carrier concentration is the same (4 × 10 19 cm -3 ), the Seebeck coefficient of CdTe-alloyed PbTe is -195 μV K -1 , 16% higher than that of the Cd-free control sample (-168 μV K -1 ). Sb doping considerably increases the electron concentration of Pb 0.97 Cd 0.03 Te, giving rise to optimized power factors of ~17 μW cm -1 K -2 at 800 K. More importantly, Sb induces strained endotaxial nanostructures evenly distributed in the matrix. Furthermore, these Sb-rich nanostructures account for the ~40% reduction in the lattice thermal conductivity over the whole measured temperature range. As a result, a maximum ZT of 1.2 is attained at 750 K in 0.5 mol % Sb-doped Pb 0.97 Cd 0.03 Te alloys.

36 MATERIALS SCIENCE↗

Squeezed states of electrons and transitions of the density of states

Electron systems which have low dimensional properties have been constructed by squeezing the motion in zero, one, or two-directions. An isolated quantum dot is modeled by a potential box with delta-profiled, penetrable potential walls embedded in a large outer box with infinitely high potential walls which represent the world function with respect to vacuum. We show the smooth crossover of the density of states from the three-dimensional to the quasi-zero dimensional electron gas.

Lee, Seung Joo↗

Isotopic Constraints on the Nature of Primary Precipitates in Archean–Early Paleoproterozoic Iron Formations from Determinations of the Iron Phonon Density of States of Greenalite and 2L- and 6L-Ferrihydrite

Iron formations (IFs) are chemical sedimentary rocks that were widely deposited before the Great Oxidation Event (GOE) around 2.4- 2.2 Ga. It is generally thought that IFs precipitated as hydrated Fe 3+ oxides (HFOs) such as ferrihydrite following surface oxidation of Fe 2+ -rich, anoxic deep waters. This model often implicates biological oxidation and underpins reconstructions of marine nutrient concentrations. However, nanoscale petrography indicates that an Fe 2+ silicate, greenalite, is a common primary mineral in well-preserved IFs, motivating an alternative depositional model of anoxic ferrous silicate precipitation. It is unclear, however, if Fe 2+ -rich silicates can produce the Fe isotopic variations in IFs that are well explained by Fe 2+ oxidation. To address this question, we constrain the equilibrium Fe isotopic ( 56 Fe/ 54 Fe) fractionation of greenalite and ferrihydrite by determining the iron phonon densities of states for those minerals. Here, we use ab initio density functional theory (DFT + U) calculations and nuclear resonant inelastic X-ray scattering spectroscopy to show that ferrous greenalite should be isotopically lighter than ferrihydrite by similar to 1-1.2 parts per thousand at equilibrium, and fractionation should scale linearly with increasing Fe 3+ content in greenalite. By anchoring ferrihydrite-greenalite mineral pair fractionations to published experimental Fe isotopic fractionations between HFOs and aqueous Fe 2+ , we show that ferrous greenalite may produce all but the heaviest pre-GOE Fe isotopic compositions and mixed valence greenalites can produce the entire record. Our results suggest that heavy Fe isotope enrichments alone are not diagnostic of primary IF mineralogies, and ferrihydrite and partially oxidized or even purely ferrous greenalite are all viable primary IF mineralogies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the truncation of the number of excited states in density functional theory sum-over-states calculations of indirect spin spin coupling constants

It is investigated, whether the number of excited (pseudo)states can be truncated in the sum-over-states expression for indirect spin-spin coupling constants (SSCCs), which is used in the Contributions from Localized Orbitals within the Polarization Propagator Approach and Inner Projections of the Polarization Propagator (IPPP-CLOPPA) approach to analyzing SSCCs in terms of localized orbitals. As a test set we have studied the nine simple compounds, CH{sub 4}, NH{sub 3}, H{sub 2}O, SiH{sub 4}, PH{sub 3}, SH{sub 2}, C{sub 2}H{sub 2}, C{sub 2}H{sub 4}, and C{sub 2}H{sub 6}. The excited (pseudo)states were obtained from time-dependent density functional theory (TD-DFT) calculations with the B3LYP exchange-correlation functional and the specialized core-property basis set, aug-cc-pVTZ-J. We investigated both how the calculated coupling constants depend on the number of (pseudo)states included in the summation and whether the summation can be truncated in a systematic way at a smaller number of states and extrapolated to the total number of (pseudo)states for the given one-electron basis set. We find that this is possible and that for some of the couplings it is sufficient to include only about 30% of the excited (pseudo)states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Self-Interaction Corrected Density Functional Theory to Early, Middle, and Late Transition States

Density functional theory (DFT)-based methods often significantly underpredict chemical reaction barriers compared with experiments because of the tendency of DFT to over-stabilize transition states with stretched bonds due to the impact of unphysical electron self-interaction. But many reactions have early or late transition states where the transition state geometry closely resembles the reactants or products, respectively. The role of self-interaction in those cases is not known. Here we compare the performance of DFT with and without self-interaction correction (SIC) for describing the hydrogenation of CO and CO 2 catalyzed by a Lewis acid-base pair incorporated onto an aromatic cluster, using CCSD(T) results for reference. The three elementary steps in these reactions consist of an early, a middle, and a late transition. Our results show that the Perdew-Zunger SIC (PZ-SIC), implemented in the Fermi-L Lowdin orbital SIC (FLO-SIC) approach, qualitatively improves the description of the forward and reverse reaction barriers relative to uncorrected DFT for the middle transition, but not the early or late transitions. By contrast, the local scaling SIC (LSIC) method, also implemented in the FLO-SIC framework, significantly improves the calculated barriers over DFT and PZ-SIC in all but one case. Lastly, the results also show how the FLO-SIC approach can provide insight into the bonding in aromatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Processing dependence of metal/tunnel-oxide/silicon junctions

The effects of process variations on the fixed-charge density, interface-state density, and tunneling properties of tunnel oxides on (100) silicon are discussed. Annealing the oxide in nitrogen reduces the fixed-charge and interface-state densities substantially, but also causes a marked increase in oxide capacitance. Anneals in forming gas before metallization alter the interface-state distribution and decrease the insulating qualities of the tunneling oxides. Postmetallization anneals in forming gas reduce the interface-state density to 1 x 10 to the 11th e/sq cm V or below, and appear not to affect the current through the oxide. No evidence for metal-induced interface states is observed.

Dressendorfer, P. V.↗

Phonon density of states of model ferroelectrics

First principles density functional calculations and inelastic neutron scattering measurements have been used to study the variations of the phonon density of states of PbTiO3 and SrTiO3 as a function of temperature. The phonon spectra of the quantum paraelectric SrTiO3 is found to be fundamentally distinct from those of ferroelectric PbTiO3 and BaTiO3. SrTiO3 has a large 70-90 meV phonon band-gap in both the low temperature antiferrodistortive tetragonal phase and in the high temperature cubic phase. Key bonding changes in these perovskites lead to spectacular differences in their observed phonon density of states.

36 MATERIALS SCIENCE↗

Electronic density-of-states of amorphous vanadium pentoxide films: Electrochemical data and density functional theory calculations

Thin films of V{sub 2}O{sub 5} were prepared by sputter deposition onto transparent and electrically conducting substrates and were found to be X-ray amorphous. Their electrochemical density of states was determined by chronopotentiometry and displayed a pronounced low-energy peak followed by an almost featureless contribution at higher energies. These results were compared with density functional theory calculations for amorphous V{sub 2}O{sub 5}. Significant similarities were found between measured data and computations; specifically, the experimental low-energy peak corresponds to a split-off part of the conduction band apparent in the computations. Furthermore, the calculations approximately reproduce the experimental band gap observed in optical measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Method for Accurate Determination of the Electron Contribution: Specific Heat of Ba 0.59 K 0.41 Fe 2 As 2

Twenty two years after the opening of the field of high temperature superconductivity by Georg Bednorz and Alex Müller a new addition to this class of materials, namely the iron-pnictides and chalcogenides, perplexes the scientific community. Making use of the accumulated wisdom, a great deal of their physics has been “mapped” in record time using all available measurement techniques. Among these, specific-heat has been proven a powerful and unique technique in the study of physical properties of bulk materials, especially of superconductors. We report here specific-heat measurements on the nearly optimally doped iconic iron-arsenide superconductor Ba 0.59 K 0.41 Fe 2 As 2 . We use a new method, based on direct comparisons of α-model expressions for the electron contribution with the measured total specific heat, to extract the electron contribution. It circumvents the need in the conventional analyses for an independent, necessarily approximate, determination of the lattice contribution, which is subtracted from the total to obtain the electron contribution, and it eliminates the consequent uncertainties in the electron contribution. For Ba 0.59 K 0.41 Fe 2 As 2 the electron density of states is comprised of contributions from two electron bands with superconducting-state energy gaps differing by a factor 3.8, with 77% coming from the band with the larger gap. The vortex-state specific heat suggests nodeless gaps. Comparison of the normal-state density of states with band-structure calculations shows an extraordinarily large effective mass enhancement, for which there is no precedent in simple metals and no theoretical explanation.

Conventional Analysis↗

Band structure of W and Mo by empirical pseudopotential method

The empirical pseudopotential method (EPM) is used to calculate the band structure of tungsten and molybdenum. Agreement between the calculated reflectivity, density of states, density of states at the Fermi surface and location of the Fermi surface from this study and experimental measurements and previous calculations is good. Also the charge distribution shows the proper topological distribution of charge for a bcc crystal.

Sridhar, C. G.↗

The Proton Density of States in Confined Water (H2O)

The hydrogen density of states (DOS) in confined water has been probed by inelastic neutron scattering spectra in a wide range of its P–T phase diagram. The liquid–liquid transition and the dynamical crossover from the fragile (super-Arrhenius) to strong (Arrhenius) glass forming behavior have been studied, by taking into account the system polymorphism in both the liquid and amorphous solid phases. The interest is focused in the low energy region of the DOS ( E < 10 meV) and the data are discussed in terms of the energy landscape (local minima of the potential energy) approach. In this latest research, we consider a unit scale energy (EC) linked to the water local order governed by the hydrogen bonding (HB). All the measured spectra, scaled according to such energy, evidence a universal power law behavior with different exponents ( γ ) in the strong and fragile glass forming regions, respectively. In the first case, the DOS data obey the Debye squared-frequency law, whereas, in the second one, we obtain a value predicted in terms of the mode-coupling theory (MCT) ( γ ≃ 1.6 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Convergence for the Wang-Landau Density of States

The Wang-Landau method of estimating the density of states, g (E), has become a powerful tool in statistical mechanics. Here it is shown that the distribution of random walkers sampled using an estimated density of states can always be used to improve the estimate. Specifically, this can be done without resorting to an auxiliary modification factor, f, which previously has been been used to find g (E) self consistently through a procedure that reduces f incrementally towards unity. The new, straight-forward approach is validated for multiple, independent random walkers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Behavioral Features of MIS Memristors with a Si{sub 3}N{sub 4} Nanolayer Fabricated on a Conductive Si Substrate

The effect of the material of the metal plates (Au, Ta, W) and exposure to a high-power blue laser on the memristive characteristics of metal–insulator–semiconductor (MIS) capacitors with a Si{sub 3}N{sub 4} film 6 nm thick fabricated on the basis of n{sup +}-Si is studied. It is shown that bipolar switching by the current appears only in capacitors with Au. The causes of the absence of bipolar switching in capacitors with Ta and W are explained. The switching of capacitors with Ta by the current and light and the photomemory effect are detected. It is shown that, despite the high doping level of the semiconductor substrate, it decreases the MIS memristor response rate due to a high density of surface states localized at the Si{sub 3}N{sub 4}/n{sup +}-Si interface. However, illumination allows a significant increase in the response rate due to a decrease in the semiconductor resistivity. The surface state densities are determined. To improve the frequency characteristics of MIS memristors, it is necessary to achieve a low surface state density.

36 MATERIALS SCIENCE↗

Einstein Modes in the Phonon Density of States of the Single-filled Skutterudite Yb0.2Co4Sb12

Measurements of the phonon density of states by inelastic neutron time-of-flight scattering and specific-heat measurements along with first-principles calculations, provide compelling evidence for the existence of an Einstein oscillator (rattler) at {omega}{sub E1} {approx} 5.0 meV in the filled skutterudite Yb{sub 0.2}Co{sub 4}Sb{sub 12}. Multiple dispersionless modes in the measured density of states of Yb{sub 0.2}Co{sub 4}Sb{sub 12} at intermediate transfer energies (14 {le} {omega} {le} 20 meV) are exhibited in both the experimental and theoretical density of states of the Yb-filled specimen. A peak at 12.4 meV is shown to coincide with a second Einstein mode at {omega}{sub E2} {approx} 12.8 meV obtained from heat-capacity data. The local modes at intermediate transfer energies are attributed to altered properties of the host CoSb{sub 3} cage as a result of Yb filling. It is suggested that these modes are owed to a complementary mechanism for the scattering of heat-carrying phonons in addition to the mode observed at {omega}{sub E1} {approx} 5.0 meV. Our observations offer a plausible explanation for the significantly higher dimensionless figures of merit of filled skutterudites, compared to their parent compounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗