Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIELECTRIC POLARIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Information Carried by Electromagnetic Radiation Launched from Accelerated Polarization Currents

We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-current distribution approaches the target at the speed of light at all times during its transit along the antenna. This results in a one-to-one correspondence between the time at which each point on the moving polarization current enters the antenna and the time at which all of the radiation emitted by this particular point during its transit through the antenna arrives simultaneously at the target. This has the effect of reproducing the desired time dependence of the original broadcast signal. For other observer-detector positions, the time dependence of the signal is scrambled, due to the nontrivial relationship between emission (retarded) time and reception time. This technique represents a contrast to conventional radio transmission methods; in most examples of the latter, signals are broadcast with little or no directivity, selectivity of reception being achieved through the use of narrow frequency bands. In place of this, the current paper uses a spread of frequencies to transmit information to a particular location; the signal is weaker and has a scrambled time dependence elsewhere. Here, we point out the possible relevance of this mechanism to 5G neighborhood networks and pulsar astronomy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transmission of isotropic light across a dielectric surface in two and three dimensions.

Average transmittance of polarized diffuse light across a dielectric surface is calculated in both two and three dimensions. The incident light in both cases is confined to an angular range measured from the surface normal. Limiting values in three dimensions correspond to known results for two cases, (1) normal incidence, and (2) diffuse light incident from a 180 deg cone. The two-dimensional formulation is solvable in terms of elliptic functions and incomplete elliptic integrals of the first, second, and third kinds. Results are displayed graphically for values of transmittances in excess of 0.9 associated with relative indices of refraction in the range m = 1.0 to m = 2.6.

Allen, W. A.↗

Green’s Function Perspective on the Nonlinear Density Response of Quantum Many-Body Systems

We derive equations of motion for higher order density response functions using the theory of thermodynamic Green’s functions. We also derive expressions for the higher order generalized dielectric functions and polarization functions. Moreover, we relate higher order response functions and higher order collision integrals within the Martin–Schwinger hierarchy. We expect our results to be highly relevant to the study of a variety of quantum many-body systems such as matter under extreme temperatures, densities, and pressures.

Density Functional Theory↗

On the Interplay of Electronic and Lattice Screening on Exciton Binding in Two-Dimensional Lead Halide Perovskites

We use path integral Monte Carlo to study the energetics of excitons in layered, hybrid organic–inorganic perovskites in order to elucidate the relative contributions of dielectric confinement and electron–phonon coupling. While the dielectric mismatch between polar perovskite layers and nonpolar ligand layers significantly increases the exciton binding energy relative to their three-dimensional bulk crystal counterparts, formation of exciton polarons attenuates this effect. The contribution from polaron formation is found to be a nonmonotonic function of the lead halide layer thickness, which is clarified by a general variational theory. Accounting for both of these effects provides a description of exciton binding energies in good agreement with experimental measurements. By studying isolated layers and stacked layered crystals of various thicknesses, with ligands of varying polarity, we provide a systematic understanding of the excitonic behavior of this class of materials and how to engineer their photophysics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The smectic Z A phase: Antiferroelectric smectic order as a prelude to the ferroelectric nematic

We have structurally characterized the liquid crystal (LC) phase that can appear as an intermediate state when a dielectric nematic, having polar disorder of its molecular dipoles, transitions to the almost perfectly polar-ordered ferroelectric nematic. This intermediate phase, which fills a 100-y-old void in the taxonomy of smectic LCs and which we term the “smectic Z A ,” is antiferroelectric, with the nematic director and polarization oriented parallel to smectic layer planes, and the polarization alternating in sign from layer to layer with a 180 Å period. A Landau free energy, originally derived from the Ising model of ferromagnetic ordering of spins in the presence of dipole–dipole interactions, and applied to model incommensurate antiferroelectricity in crystals, describes the key features of the nematic–SmZ A –ferroelectric nematic phase sequence.

36 MATERIALS SCIENCE↗

The gravitational wakefield of a molecular cloud in a disk galaxy

A molecular cloud (considered as a point macroparticle) represents a clump of increased mass density moving in the disk of a galaxy. Its presence generates a gravitational polarization of the disk, somewhat analogous to the polarization of a dielectric medium by a test charged particle. This means that the cloud travels along with a wakefield (a region of increased mass density) which is the collective response of the stars and gas to the perturbing mass. It can represent many times the mass of the cloud, and emits spiral density waves which propagate away. In terms of statistical mechanics, this wakefield will appear as an increased two-particle correlation function which is the equivalent of the Debye sphere in a plasma - despite the absence here of negative charges. At short distances clouds will thus interact through their own gravitational field amplified by their wakefields, which might thus strongly affect their collisionality. Researchers present a calculation of this wakefield and discuss its importance in the collisional dynamics of molecular clouds.

Tagger, M.↗

High-frequency techniques for RCS prediction of plate geometries and a physical optics/equivalent currents model for the RCS of trihedral corner reflectors

Part 1 of this report continues the investigation, initiated in previous reports, of scattering from rectangular plates coated with lossy dielectrics. The hard polarization coefficients given in the last report are incorporated into a model, which includes second- and third-order diffractions, for the coated plate. Computed results from this model are examined and compared to measured data. A breakdown of the contribution of each of the higher-order terms to the total radar cross section (RCS) is given. The effectiveness of the uniform theory of diffraction (UTD) model in accounting for the coating effect is investigated by examining a Physical Optics (PO) model which incorporates the equivalent surface impedance approximation used in the UTD model. The PO, UTD, and experimental results are compared. Part 2 of this report presents a RCS model, based on PO and the Method of Equivalent Currents (MEC), for a trihedral corner reflector. PO is used to account for the reflected fields, while MEC is used for the diffracted fields. Single, double, and triple reflections and first-order diffractions are included in the model. A detailed derivation of the E(sub theta)-polarization, monostatic RCS is included. Computed results are compared with finite-difference time-domain (FDTD) results for validation. The PO/MEC model of this report compares very well with the FDTD model, and it is a much faster model in terms of computational speed.

Balanis, Constantine A.↗

Modeling of Optical Waveguide Poling and Thermally Stimulated Discharge (TSD) Charge and Current Densities for Guest/Host Electro Optic Polymers

A charge density and current density model of a waveguide system has been developed to explore the effects of electric field electrode poling. An optical waveguide may be modeled during poling by considering the dielectric charge distribution, polarization charge distribution, and conduction charge generated by the poling field. These charge distributions are the source of poling current densities. The model shows that boundary charge current density and polarization current density are the major source of currents measured during poling and thermally stimulated discharge These charge distributions provide insight into the poling mechanisms and are directly related to E(sub A), and, alpha(sub r). Initial comparisons with experimental data show excellent correlation to the model results.

Watson, Michael D.↗

In Situ Poling and Imidization of Amorphous Piezoelectric Polyimides

An amorphous piezoelectric polyimide containing polar functional groups has been developed using a combination of experimental and molecular modeling for potential use in high temperature applications. This amorphous polyimide, (Beta-CN)APB/ODPA, has exhibited good thermal stability and piezoelectric response at temperatures up to 150C. Density functional calculations predicted that a partially cured amic acid (open imide ring) possesses a dipole moment four times larger than the fully imidized closed ring. In situ poling and imidization of the partially cured (Beta-CN)APB/ODPA, was studied in an attempt to maximize the degree of dipolar orientation and the resultant piezoelectric response. A positive corona poling was used to minimize localized arcing during poling and to allow use of higher poling fields without dielectric breakdown. The dielectric relaxation strength, remanent polarization, and piezoelectric response were evaluated as a function of the poling profile. The partially cured, corona poled polymers exhibited higher dielectric relaxation strength (delta varepsilon), remanent polarization (Pr) and piezoelectric strain coefficient (d33) than the fully cured, conventionally poled ones.

Park, Cheol↗

Electronic and magnetic phase diagrams of the Kitaev quantum spin liquid candidate Na 2 Co 2 TeO 6

The 3⁢d 7 Co 2+ -based insulating magnet Na 2 ⁢Co 2 ⁢TeO 6 has recently been reported to have strong Kitaev interactions on a honeycomb lattice and is thus being considered as a Kitaev quandum spin liquid candidate. However, due to the existence of other types of interactions, a spontaneous long-range magnetic order occurs. This order is suppressed by applied magnetic fields leading to a succession of phases and ultimately saturation of the magnetic moments. The precise phase diagram, the nature of the phases, and the possibility that one of the field-induced phases is a Kitaev quantum spin liquid phase are still a matter of debate. Here, in this study, we measured an extensive set of physical properties to build the complete temperature-field phase diagrams to magnetic saturation at 10 T for magnetic fields along the a and a* axes, and a partial phase diagram up to 60 T along c. We probe the phases using magnetization, specific heat, magnetocaloric effect, magnetostriction, dielectric constant, and electric polarization, which is a symmetry-sensitive probe. With these measurements, we identify all the previously incomplete phase boundaries and find additional high-field phase boundaries. We find strong magnetoelectric coupling in the dielectric constant and moderate magnetostrictive coupling at several phase boundaries. Furthermore, we detect the symmetry of the magnetic order using electrical polarization measurements under magnetic fields. Based on our analysis, the absence of electric polarization under zero or finite magnetic field in any of the phases or after any combination of magnetic/electric field cooling suggests that a zigzag spin structure is more likely than a triple-Q spin structure at zero field. Finally, we investigate the hysteresis and first- or second-order nature of each phase transition and its entropy changes. With this information, we establish a map of the magnetic phases of this compound and its magnetic, thermodynamic, and magnetoelectric properties, and discuss where spin liquid or other phases may be sought in future studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lateral Beam Shifts and Depolarization Upon Oblique Reflection from Dielectric Mirrors

Abstract Dielectric mirrors comprising thin‐film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here, potential problems are investigated that can arise when dielectric mirrors are used at oblique incidence, in particular for focused beams. It is found that light beams reflected from dielectric mirrors can experience lateral beam shifts, beam‐shape distortion, and depolarization, and these effects have a strong dependence on wavelength, incident angle, and incident polarization. Because vendors of dielectric mirrors typically do not share the particular layer structure of their products, several dielectric‐mirror stacks are designed and simulated, and then the lateral beam shift from two commercial dielectric mirrors and one coated metal mirror is also measured. This paper brings awareness of the tradeoffs between dielectric mirrors and front‐surface metal mirrors in certain optics experiments, and it is suggested that vendors of dielectric mirrors provide information about beam shifts, distortion, and depolarization when their products are used at oblique incidence.

Physics↗

Reorganization Energy of Electron Transfer in Ionic Liquids

We report bandshape analysis of charge-transfer optical bands in room-temperature ionic liquids (ILs) is performed to extract reorganization energy of electron transfer. Remarkably, the reorganization energies in ILs are close to those in cyclohexane. This result runs against common wisdom in the field since conducting ILs, characterized by an infinite static dielectric constant, and nonpolar cyclohexane fall to the opposite ends of the polarity scale based on their dielectric constants. Theoretical calculations employing structure factors of ILs from molecular dynamics simulations support low values of the reorganization energy. Standard dielectric arguments do not apply to solvation in ILs and nonergodic reorganization energies are required for a quantitative analysis.

14 SOLAR ENERGY↗

Anisotropic Properties of Epitaxial Ferroelectric Lead-Free 0.5[Ba(Ti 0.8 Zr 0.2 )O 3 ]-0.5(Ba 0.7 Ca 0.3 )TiO 3 Films

As the energy demand is expected to double over the next 30 years, there has been a major initiative towards advancing the technology of both energy harvesting and storage for renewable energy. In this work, we explore a subset class of dielectrics for energy storage since ferroelectrics offer a unique combination of characteristics needed for energy storage devices. We investigate ferroelectric lead-free 0.5[Ba(Ti 0.8 Zr 0.2 )O 3 ]-0.5(Ba 0.7 Ca 0.3 )TiO 3 epitaxial thin films with different crystallographic orientations grown by pulsed laser deposition. We focus our attention on the influence of the crystallographic orientation on the microstructure, ferroelectric, and dielectric properties. Our results indicate an enhancement of the polarization and strong anisotropy in the dielectric response for the (001)-oriented film. The enhanced ferroelectric, energy storage, and dielectric properties of the (001)-oriented film is explained by the coexistence of orthorhombic-tetragonal phase, where the disordered local structure is in its free energy minimum.

36 MATERIALS SCIENCE↗

Anomalous polarization reversal in strained thin films of CuIn⁢P 2 ⁢S 6

Strain-induced transitions of polarization reversal in thin films of a ferrielectric CuIn⁢P 2 ⁢S 6 (CIPS) with ideally conductive electrodes are explored using the Landau-Ginzburg-Devonshire approach with an eighth-order free energy expansion in polarization powers. Due to multiple potential wells, the height and position of which are temperature and strain dependent, the energy profiles of CIPS can flatten in the vicinity of the nonzero polarization states. Thereby, we reveal an unusually strong effect of a mismatch strain on the out-of-plane polarization reversal, hysteresis loop shape, dielectric susceptibility, and piezoelectric response of CIPS films. By varying the sign of the mismatch strain and its magnitude in a fairly narrow range, quasistatic hysteresisless paraelectric curves can transform into double, triple, and other types of pinched and single hysteresis loops. The strain effect on the polarization reversal is opposite, i.e., anomalous, in comparison with many other ferroelectric films, for which the out-of-plane remanent polarization and coercive field increase strongly for tensile strains and decrease or vanish for compressive strains. For definite values of temperature and mismatch strain, the low-frequency hysteresis loops of polarization may exhibit negative slope in a relatively narrow range of external field amplitude and frequency. The low-frequency susceptibility hysteresis loops, which correspond to the negative slope of polarization loops, contain only positive values, which can be giant in the entire range of field changes. In conclusion, the corresponding piezoresponse also reaches giant values, being maximal near coercive fields.

Dielectric properties↗