Results for “DIGITAL INTEGRATOR” — Page 5

NASA NTRSDate not supplied

Model Based Systems Analysis and Engineering (MBSA/E) Overview

This presentation provides an overview of the Model-Based Systems Analysis and Engineering work to be completed by the Advanced Air Transportation Technology Project, Systems Analysis and Integration team. The work aims to develop an integrated systems analysis and engineering capability that will be used to digitally integrate and evaluate subsonic aircraft technologies being developed by projects comprising the Sustainable Flight National Partnership.

System Analysis↗

NASA NTRS2000

A Single-Chip Programmable Digital CMOS Imager with Enhanced Low Light Detection Capability

Low-power, low-cost, miniature and integrated digital imaging systems are expected to be widely used in consumer electronics in the near future. While CMOS technology has been responsible for the phenomenal growth in consumer electronics, micro-porcessors, memory, audio systems, and radio-frequency circuits (e.g. cellular phones), till recently, the video technology remained outside this mainstream.

digital↗

NASA NTRS1988

Flight control systems development and flight test experience with the HiMAT research vehicles

Two highly maneuverable aircraft technology (HiMAT) remotely piloted vehicles were flown a total of 26 flights. These subscale vehicles were of advanced aerodynamic configuration with advanced technology concepts such as composite and metallic structures, digital integrated propulsion control, and ground (primary) and airborne (backup) relaxed static stability, digital fly-by-wire control systems. Extensive systems development, checkout, and flight qualification were required to conduct the flight test program. The design maneuver goal was to achieve a sustained 8-g turn at Mach 0.9 at an altitude of 25,000 feet. This goal was achieved, along with the acquisition of high-quality flight data at subsonic and supersonic Mach numbers. Control systems were modified in a variety of ways using the flight-determined aerodynamic characteristics. The HiMAT program was successfully completed with approximately 11 hours of total flight time.

Kempel, Robert W.↗

NASA NTRS2022

An Earth System Digital Twin for Flood Prediction and Analysis

An Earth System Digital Twin (ESDT) is a dynamic, interactive, digital replica of the state and temporal evolution of Earth systems. It integrates multiple models along with observation data, and connecting them with analysis, AI, and visualization tools. Together, these enable users to explore the current state of the Earth system, predict future conditions, and run hypothetical scenarios to understand how the system would evolve under various assumptions. The NASA’s Advanced Information Systems Technology (AIST)’s Integrated Digital Earth Analysis System (IDEAS) project is to establish an extensible architectural solution to develop digital twins of our physical environment for Earth Science. IDEAS delivers a formal system architecture with mechanisms for the outputs of one model to feed into others; for driving models with observation data; and for harmonizing observation data and model outputs for analysis. To validate and demonstrate the IDEAS architecture, this project collaborates with the Space Climate Observatory (SCO)’s FloodDAM project and the Centre National d’Etudes Spatiales (CNES) to focus on floods detection, prediction and their impacts.

Kettig, Peter↗

NASA NTRS2023

Digital Engineering Design Center (DEDC): Modelling an ISRU System

The DEDC provides immersive project-based learning on digital engineering toolsets and processes supporting NASA’s digital transformation goals: - Digital Engineering uses authoritative sources of systems' data and models as a continuum across disciplines to support integrated digital approach life cycle activities from concept through disposal. - The digital environment provided includes the state-of-the-art digital engineering suite, Siemens Xcelerator. The pilot project is developing an end-to-end integrated model of an In-Situ Resource Utilization (ISRU) system for commodities production: - ISRU uses local resources to provide mission consumables to enable a sustainable Moon or Mars surface presence. - The final digital twin product will include a methanation reactor, condenser, and electrolyzer subsystem.

Digital Engineering Design Center↗

NASA NTRS2021

NASA Strategy for Technology Development

The National Aeronautics and Space Administration (NASA) Office of the Chief Technologist (OCT) provides the strategy and leadership that integrates NASA’s technology development and open innovation activities to advance American aeronautic, science, and space exploration objectives. OCT performs an agency-level technology coordination role, coordinating with the NASA Mission Directorates, field centers, and other government agencies to align the agency’s technology investments to meet mission requirements while filling gaps, anticipating future needs, and minimizing duplication of effort. OCT provides the strategy and coordination that guide NASA's technology and innovation activities through Strategic Technology Integration, Digital Transformation, the Science and Technology Partnership Forum, and Innovation. The Strategic Technology Integration team informs policy, requirements, and strategy for NASA’s technology development activities in support of the Chief Technologist by coordinating with NASA mission directorates, other government agencies, and external organizations. As part of these efforts, OCT develops the NASA Technology Taxonomy and the NASA Strategic Space Technology Investment Plan. Digital Transformation will increasingly change the way NASA operates and will enable the agency’s missions to be completed more efficiently and effectively. It will allow current and future employees to use their talents in more innovative ways. The Science and Technology Partnership Forum is a strategic forum, with principal partners at the United States Space Force and the National Reconnaissance Office. It was established to identify synergistic efforts and technologies in order to leverage those synergies and influence portfolios across space agencies in areas deemed pervasive and ready for collaboration. NASA's Innovation efforts are designed to transform diverse ideas into value and are guided by a framework that is focused on the agency’s people, processes, partnerships and portfolio. The innovation framework is used to connect the workforce to tools, strategies and activities to increase the pace of innovation. OCT translates National space policies into NASA technology strategies and coordination across the agency and interagency communities to guide NASA's technology and innovation activities to achieve capabilities needed for future missions. This chapter provides insight into the value of analyzing future states to inform technology developments to plot the strategic direction of NASA’s space technology program.

Erica Rodgers↗

NASA NTRS1985

Boolean integral calculus for digital systems

The concept of Boolean integration is introduced and developed. When the changes in a desired function are specified in terms of changes in its arguments, then ways of 'integrating' (i.e., realizing) the function, if it exists, are presented. Boolean integral calculus has applications in design of logic circuits.

Tucker, J. H.↗

NASA NTRSDate not supplied

Initial Analysis of Digitally Enabled Cooperative Operations in Class D Terminal Airspace

The primary contribution of this paper is an initial analysis of integrating digitally enabled cooperative operations (or digital operations for short) with Visual Flight Rules (VFR) and Instrument Flight Rules (IFR) operations in the terminal airspace around a Class D airport, specifically around Fort Worth Alliance airport (KAFW). Enabled by connected digital technologies and automated information exchange, digital operations as envisioned would utilize cooperative practices and operator-responsible separation to ensure safety. In the present study, three conflict management configurations for digital operations were analyzed: 1) centralized with a single instance of a conflict management service to model a scenario with only one fleet operator conducting digital operations or all fleet operators utilizing the same service, 2) federated with two different instances to model a scenario with two different fleet operators conducting digital operations, and 3) fully distributed with a different instance for each digital operation. In simulations in which recorded tracks for VFR and IFR operations were played back and digital operations were modeled that would nominally arrive at KAFW once every 20 minutes (given no conflict resolution maneuvers), there were one or fewer losses of separation (LOS) across the three conflict management configurations. The same result was seen in simulations in which digital operations would nominally arrive at KAFW once every 10 minutes. However, in simulations in which digital operations would nominally arrive at KAFW once every 5 minutes, the number of LOS ranged between six and ten. This highlights the need for follow-on research to investigate the extent to which additional capabilities for digital operations, such as complexity management and/or flow organization, may be needed.

digitally enabled cooperative operations, digital ↗

NASA NTRSDate not supplied

Initial Analysis of Digitally Enabled Cooperative Operations in Class D Terminal Airspace

The primary contribution of this paper is an initial analysis of integrating digitally enabled cooperative operations (or digital operations for short) with Visual Flight Rules (VFR) and Instrument Flight Rules (IFR) operations in the terminal airspace around a Class D airport, specifically around Fort Worth Alliance airport (KAFW). Enabled by connected digital technologies and automated information exchange, digital operations as envisioned would utilize cooperative practices and operator-responsible separation to ensure safety. In the present study, three conflict management configurations for digital operations were analyzed: 1) centralized with a single instance of a conflict management service to model a scenario with only one fleet operator conducting digital operations or all fleet operators utilizing the same service, 2) federated with two different instances to model a scenario with two different fleet operators conducting digital operations, and 3) fully distributed with a different instance for each digital operation. In simulations in which recorded tracks for VFR and IFR operations were played back and digital operations were modeled that would nominally arrive at KAFW once every 20 minutes (given no conflict resolution maneuvers), there were one or fewer losses of separation (LOS) across the three conflict management configurations. The same result was seen in simulations in which digital operations would nominally arrive at KAFW once every 10 minutes. However, in simulations in which digital operations would nominally arrive at KAFW once every 5 minutes, the number of LOS ranged between six and ten. This highlights the need for follow-on research to investigate the extent to which additional capabilities for digital operations, such as complexity management and/or flow organization, may be needed.

digitally enabled cooperative operations↗

NASA NTRSDate not supplied

Identifying Information Needs and Tools to Support Interactions between Upper Class E Traffic Management (ETM) Operations and the Air Traffic System (ATS)

With the introduction of high-altitude long endurance (HALE) vehicles and balloons designed to operate above 60,000 feet, the frequency and duration of operations in Upper Class E airspace are expected to increase. In response to the need for scalable traffic management for these diverse operations at higher altitudes, the FAA introduced the Upper Class E Traffic Management (ETM) concept. Like the successful demonstration of Uncrewed Aircraft System (UAS) Traffic Management (UTM), the ETM concept is also designed as a community-based, industry-driven cooperative approach to traffic management. As these vehicles and balloons ascend to/descend from ETM Cooperative Areas in Upper Class E, they will transit through Class A controlled airspace where they will interact with various entities of the conventional Air Traffic System (ATS) (e.g., Air Traffic Control (ATC)). This work explores tools that will help support ETM-ATS interactions for users throughout the ATS, as well as ETM Operators. An information needs analysis using ETM-ATS interaction use cases, revealed that the needed functionalities generally grouped themselves into two main themes, the visualization of flights and airspace designations, and digital communication capabilities across various human users. In this paper, we describe two envisioned tools, 1) an Integrated Visualization Tool to display flight information and airspace designations, and 2) an Integrated Digital Communication Tool to facilitate two-way information exchange between users about vehicle position information, the coordination of airspace approvals, and notifications. The tools we describe create an integrated visual representation of vehicles and airspace designations with a set of communication capabilities to consolidate information into a single display interface. These tools may be used to guide the development of prototype tools for demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center to further explore ETM-ATS interactions within the ETM concept.

Upper Class E Traffic Management (ETM)↗

NASA NTRSDate not supplied

Identifying Information Needs and Tools to Support Interactions between Upper Class E Traffic Management (ETM) Operations and the Air Traffic System (ATS)

With the introduction of high-altitude long endurance (HALE) vehicles and balloons designed to operate above 60,000 feet, the frequency and duration of operations in Upper Class E airspace are expected to increase. In response to the need for scalable traffic management for these diverse operations at higher altitudes, the FAA introduced the Upper Class E Traffic Management (ETM) concept. Like the successful demonstration of Uncrewed Aircraft System (UAS) Traffic Management (UTM), the ETM concept is also designed as a community-based, industry-driven cooperative approach to traffic management. As these vehicles and balloons ascend to/descend from ETM Cooperative Areas in Upper Class E, they will transit through Class A controlled airspace where they will interact with various entities of the conventional Air Traffic System (ATS) (e.g., Air Traffic Control (ATC)). This work explores tools that will help support ETM-ATS interactions for users throughout the ATS, as well as ETM Operators. An information needs analysis using ETM-ATS interaction use cases, revealed that the needed functionalities generally grouped themselves into two main themes, the visualization of flights and airspace designations, and digital communication capabilities across various human users. In this paper, we describe two envisioned tools, 1) an Integrated Visualization Tool to display flight information and airspace designations, and 2) an Integrated Digital Communication Tool to facilitate two-way information exchange between users about vehicle position information, the coordination of airspace approvals, and notifications. The tools we describe create an integrated visual representation of vehicles and airspace designations with a set of communication capabilities to consolidate information into a single display interface. These tools may be used to guide the development of prototype tools for demonstrations at the National Aeronautics and Space Administration (NASA) Ames Research Center to further explore ETM-ATS interactions within the ETM concept.

Upper Class E Traffic Management (ETM)↗

NASA NTRS1989

Integrated controls pay-off

It is shown that the integration of the propulsion and flight control systems for high performance aircraft can help reduce pilot workload while simultaneously increasing overall aircraft performance. Results of the Highly Integrated Digital Electronic Control (HiDEC) flight research program are presented to demonstrate the emerging payoffs of controls integration. Ways in which the performance of fighter aircraft can be improved through the use of propulsion for primary aircraft control are discussed. Research being conducted by NASA with the F-18 High Angle-of Attack Research Vehicle is described.

Putnam, Terrill W.↗

NASA NTRS1966

Digital devices development - Integrated circuits-delay line interface circuitry

Interfacing ultrasonic delay lines in digital systems using integrated circuit logic

INTEGRATED CIRCUIT↗

DOE OSTI2025

Biofoundries: Principles, Tools, and Applications

This chapter aims to provide a broad overview of biofoundries and introduces the principles, concepts, and case studies. We first outline the underlying principles of the Design-Build-Test-Learn (DBTL) framework and the role of automation, digital integration, and standardization. The chapter then explores core biofoundry technologies including robotic liquid handlers, high-throughput analytical instruments, and digital infrastructure for data management and workflow scheduling. Case studies spanning DNA assembly, protein engineering, metabolic engineering, and mammalian cell culture demonstrate the practical applications of the biofoundries. Economic and societal impacts are assessed alongside current limitations. We discuss the emerging trends including artificial intelligence integration and cloud-based distributed facilities to highlight its potential for biotechnology and the bioeconomy.

Singh, Nilmani↗

NASA NTRS1979

Digital PSK to BiO-L demodulator for 2 sup nx(bit rate) carrier

A phase shift key (PSK) to BiO-L demodulator which uses standard digital integrated circuits is discussed. The demodulator produces NRZ-L, bit clock, and BiO-L outputs from digital PSK input signals for which the carrier is a 2 to the Nth multiple of the bit rate. Various bit and carrier rates which are accommodated by changing various component values within the demodulator are described. The use of the unit for sinusoidal inputs as well as digital inputs is discussed.

Shull, T. A.↗

NASA NTRS1987

Detection of signals by weighted integrate-and-dump filter

A Weighted Integrate and Dump Filter (WIDF) is presented that results in reducing those losses in telemetry symbol signal to noise ratio (SNR) which occur in digital Integrate and Dump Filters (IDFs) when the samples are not phase locked to the input data symbol clock. The Minimum Mean Square Error (MMSE) criterion is used to derive a set of weights for approximating the analog integrate and dump filter, which is the matched filter for detection of signals in additive white Gaussian noise. This new digital matched filter results in considerable performance improvement compared to unweighted digital matched filters. An example is presented for a sampling rate of four times the symbol rate. As the sampling offset (or phase) varies with respect to the data symbol boundaries, the output SNR varies 1 dB for an unweighted IDF, but only 0.3 dB for the optimum WIDF, averaged over random data patterns. This improvement in performance relative to unweighted IDF means that significantly lower sampling and processing rates can be used for given telemetry symbol rates, resulting in reduced system cost.

Sadr, R.↗

NASA NTRS1986

Test and evaluation of the HIDEC engine uptrim algorithm

The highly integrated digital electronic control (HIDEC) program will demonstrate and evaluate the improvements in performance and mission effectiveness that result from integrated engine-airframe control systems. Performance improvements will result from an adaptive engine stall margin mode, a highly integrated mode that uses the airplane flight conditions and the resulting inlet distortion to continuously compute engine stall margin. When there is excessive stall margin, the engine is uptrimmed for more thrust by increasing engine pressure ratio (EPR). The EPR uptrim logic has been evaluated and implemented into computer simulations. Thrust improvements over 10 percent are predicted for subsonic flight conditions. The EPR uptrim was successfully demonstrated during engine ground tests. Test results verify model predictions at the conditions tested.

Ray, R. J.↗

NASA NTRS1986

Test and evaluation of the HIDEC engine uptrim algorithm

The highly integrated digital electronic control (HIDEC) program will demonstrate and evaluate the improvements in performance and mission effectiveness that result from integrated engine-airframe control systems. Performance improvements will result from an adaptive engine stall margin mode, a highly integrated mode that uses the airplane flight conditions and the resulting inlet distortion to continuously compute engine stall margin. When there is excessive stall margin, the engine is uptrimmed for more thrust by increasing engine pressure ratio (EPR). The EPR uptrim logic has been evaluated and implemente into computer simulations. Thrust improvements over 10 percent are predicted for subsonic flight conditions. The EPR uptrim was successfully demonstrated during engine ground tests. Test results verify model predictions at the conditions tested.

Ray, R. J.↗