Search NASA⌕ Search

SEARCH · Search NASA

Results for “DO-160”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Edge crack growth of thermally aged graphite/polyimide composites

Laminates of Celion 6000/LARC-160 and Celion 6000/PMR-15 graphite/polyimide composite materials were aged in air at temperatures of 202, 232, 260 and 288 C for various times up to 15,000 hours. Three unidirectional specimen types were studied: short beam shear (SBS), flexure, and 153 mm square panels. The interior region of the square panels exhibited little or no property degradation, whereas both laminate materials degraded and cracked preferentially at the specimen edge perpendicular to the fibers. Using a dye penetrant, the specimens were X-rayed and the crack depth measured as a function of time and temperature. A time temperature superposition of the crack data was successfully performed using an Arrhenius form for the shift factor. A direct correlation was found for edge crack depth and SBS strength for the LARC-160 laminates but the correlation for PMR-15 laminates was more complex.

Nelson, J. B.↗
NASA NTRS1984

Contamination Measurements During Ius Thermal Vacuum Tests in A Large Space Chamber

The levels of contamination that originate from inside the IUS equipment support section (ESS) due to outgassing from electronics components and wiring operating at elevated temperatures (80-160 F) were investigated. Pressure was measured inside and outside the ESS. Mass deposition measurements were made with quartz crystal microbalances (QCM) facing into and away from ESS vents. The OCM's were operated at -50 C and -180 C using thermoelectrically and cryogenically cooled QCM's. Gaseous nitrogen flow inside the ESS was used to obtain the effective molecular flow vent area of the ESS, which was evaluated to be 359 sq cm (56 sq in) compared to the 978 sq cm (150 sq in) estimated by an earlier atmosphere pressure billowing test. The total outgassing rate of the ESS materials at a temperature of 60 C (140 F) decays with a time constant of 11.5 hours based on pressure measurements during the hot cycle. A time constant of 22 hours was estimated for the fraction of the outgassing which will condense on a -50 C surface. In contrast, the time constant is only 10.1 hours for the outgassing material which condenses on a surface at -180 C. A surface at -180 C collects approximately one half of the material vented from the ESS which impinges on it. Pressure measurements show very good correlation with the mass deposition measurements.

C R Mullen↗
NASA NTRS1983

Thermal aging of graphite/polyimide composites

Celion 6000/PMR-15, Celion 6000/LARC-160, and Celion 6000/RK-99 graphite/polyimides were aged in circulating air ovens at temperatures of 202, 232, 260, and 288 C for various times, up to 15,000 h. Three unidirectional specimens were studied: short-beam-shear (SBS), flexure, and 153-mm square panels. The interior region of the square panels exhibited little or no property degradation. Based on the individually aged SBS specimen results, the relative thermal-oxidative stability from highest to lowest is as follows: PMR-15, LARC-160, RK-99, Celion 6000/PMR-15 and Celion 6000/LARC-160 laminates retained at least 80 percent of their initial flexural strengths for the duration of aging at each temperature. Celion 6000/RK-99 laminates exhibited a 20 to 50 percent loss of flexural strength at all aging temperatures. All three graphite/polyimide laminate materials degraded preferentially at the specimen edge perpendicular to the fibers.

Nelson, J. B.↗
NASA NTRS1984

Far-infrared studies of Herbig-Haro objects and their exciting stars

Far-infrared (40-160 micron) observations of Herbig-Haro objects and their probable exciting stars are presented. The importance of these far-infrared observations is epitomized by the fact that, on average, 70 percent of the bolometric luminosity of a typical candidate star is radiated beyond the longest detected ground-based wavelength, even for those objects observed out to 20 micron from the ground. Extended far-infrared emission characterizes some of these regions. Some Herbig-Haro nebulae are themselves conspicuous 100 micron peaks (e.g., HH 1 and HH 25). A bipolar structure is found at 100 micron in the vicinity of the Cohen-Schwartz star. All the exciting stars must be low-mass objects (approximately less than 3 solar mass). It is argued that they might be approximately 1 solar mass protostars still in their accretion phase.

Cohen, M.↗
NASA NTRS1984

Long-term thermal aging of 2 graphite-polyimide composite materials

Two graphite/polyimide composite materials were aged in circulating air ovens at temperatures 204 C, 232 C, 260 C, and 288 C for various times up to 25000 hours. The composites were: (1) Celanese Celion 6000 graphite fiber and PMR-15 polyimide resin (Celion/PMR-15) and (2) Celion 6000 graphite fiber and LARC-160 polyimide resin (Celion/LARC-160). Three unidirectional specimen geometries were studied: short beam shear (SBS) specimens, flexure specimens, and 153 mm square panels. The interior regions of the square panels exhibited only minor property degradation. The individually aged SBS and flexure specimens exhibited large reductions in strengths after aging. Both laminate materials cracked and degraded preferentially at the specimen edge perpendicular to the fibers.

Nelson, J. B.↗
NASA NTRS1984

Infrared and millimeter-wave observations of the Sharpless 156 molecular cloud

Comprehensive near-infrared, far-infrared, and CO measurements of the Sharpless 156 region reveal five distinct sources embedded in a giant molecular cloud. These embedded sources, which appear to have formed independently within the cloud, form a diverse collection of objects; these include a prestellar condensation, massive stars with associated reflection and emission nebulosity, a bright compact H II region, and possibly even a luminous, post-main-sequence M star. The majority of the cloud has been mapped in (C-12)O and (C-13)O and has been surveyed at 2.2 microns. Also presented are 40-160 micron far-infrared maps and 1-20 micron near-infrared photometry of the active regions along with 6 arcsec resolution 10 micron and 20 micron maps of the central nebula. Inquiry is made into the nature of each source and into the process of star formation for the complex as a whole.

Joy, M.↗
NASA NTRS1984

Dynamic dielectric characterization of thermosets and thermoplastics using intrinsic variables

Dynamic dielectric analysis has been used to study curing polymer systems and thermoplastics. Measurements have been made over a frequency range of six decades. The data are analyzed in terms of capacitance, conductance, dissipation, complex permittivity, and conductivity (sigma). Complex permittivity and sigma are properties which are characteristic of the cure state of the material and independent of the size of the sample. LARC-160, PMR-15, NARMCO 5208, Epon and UDEL-P1700 have been studied. The experimental results suggest that when ionic processes dominate the dielectric response, the intensive property sigma is a good monitor of the resin's viscosity.

Kranbuehl, D. E.↗
NASA NTRS1985

Far-infrared spectrum of IRC + 10216

Far-infrared observations of IRC + 10216 in the wavelength range 20-160 microns are presented. The observations were performed simultaneously in four bands with effective wavelengths of 21, 42, 73, and 135 microns, respectively. The scan profile across the source at 21 microns is found to be wider than that for a point source. Interpreting the far-infrared spectrum on the basis of a model in which circumstellar grains are heated by a central source, the radial density dependence is r exp -2, and the emissivity dependence is lambda exp -n, it is found that n = 1-1.2. Time variations of a smaller magnitude at longer wavelengths as compared to the variation at near-infrared wavelengths can also be understood on the basis of this model. Using the mass-loss rate derived from CO observations, the mass absorption coefficient of the grains at 100 microns is found to be not less than 40/sq cm g.

Rengarajan, T. N.↗
NASA NTRS1985

Research in particles and fields

Research activities in Cosmic Rays, Gamma Rays, and Astrophysical Plasmas supported under NASA Grant NGR 05-002-160 are discussed. The report is divided into sections which describe the activities, followed by a bibliography. This group's research program is directed toward the investigation of the astrophysical aspects of cosmic rays and gamma rays and of the radiation and electromagnetic field environment of the Earth and other planets. These investigations are carried out by means of energetic particle and photon detector systems flown on spacecraft and balloons.

Stone, E. C.↗
NASA NTRS1985

Grazing incidence reflection coefficients of rhodium, osmium, platinum, and gold from 50 to 300 A

Reflectance measurements were made of several metals illuminated from various angles with light at 14 wavelengths in the interval 46.5-283 A. The metals, Rh, Os, Pt and Au were deposited as 125 A films on a binding substrate through electron beam epitaxy. Measurements were made with a grazing incidence monochromator and a reflectometer. The data generally showed lowered reflectance with increasing angles of illumination and shorter wavelengths. The reflectance peak, however, was located at wavelengths of 100-160 A, particularly at large grazing incidences. The wavelengths correspond with the 5p to epsilon-d transition in all of the elements. Rh displayed the highest overall reflectance, and both Rh and Os were more efficient than Au or Pt.

Hettrick, M. C.↗
NASA NTRS1986

Wind-driven upwelling in the vicinity of Cape Finisterre, Spain

Observations and numerical simulations of the evolution of upswelling and the resultant coastal circulation in response to two wind events occurring along the Galician coast of Spain during the April 18-26, 1982 period are presented. In situ measurements include shipboard determinations of hydrographic and biological parameters, and wind stress estimates obtained from the ship winds and from surface pressure charts. Sea surface temperature information was derived from NOAA 7 satellite images, and pigment concentration information was acquired from the Nimbus 7 coastal zone color scanner. The indication from the simulations that the greatest upswelling will occur either at Cape Finisterre or along the northern coast was confirmed by observations, and it is suggested that wave disturbances propagate northward along the coast at a speed of 120-160 km/day, and that organic material formed north of Cape Finisterre is advected out to sea northwest of the cape.

Mclain, C. R.↗
NASA NTRS1987

GPS antenna designs

Application of the current GPS NAVSTAR system to civilian service requires that a right hand, circularly polarized, -160 dBW spread spectrum signal be received from an orbiting satellite, where the antenna environment is also moving. This presents a design challenge when inexpensive antennas are desired. The intent of this survey is to provide information on the antennas mentioned and to construct and test prototypes to determine whether the choice made by the industry, the quadrifilar helix, is the best. The helix antenna is currently the low cost standard for GPS. Prototype versions were constructed using 12 gauge wire and subminiature coaxial hardline. The constructed antennas were tested using a signal generator and a reference turnstile. A spectrum analyzer was used to measure the level of the received signal.

Laube, Samuel J. P.↗
NASA NTRS1986

Measurements of electron attachment lineshapes and cross sections at ultralow electron energies for c-C6F10, c-C6F12, C8F16 and 1,1,2-C2Cl3F3

Electron attachment cross sections are reported in the electron energy range 0-160 meV and at energy resolutions of 4.5-7.5 meV (FWHM) for the molecules c-C6F10 (perfluorocyclohexene), c-C6F12 (perfluoro-1,2-dimethylcyclobutane), C8F16 (perfluoro-1,3-dimethylcyclohexane) and 1,1,2-C2Cl3F3 (1,1,2-trichlorotrifluoroethane). Use is made of the Kr photoionization technique, and measured attachment lineshapes are converted to cross sections by normalization through attachment rate constants. Comparisons are made with attachment cross sections derived from swarm-measured rate constants. Similar to previous results in eight other molecules, the present four molecules exhibit resolution-limited onsets at a threshold consistent with an s-wave attachment behavior and with a neutral-negative-ion curve crossing at zero energy.

Alajajian, S. H.↗
NASA NTRS1985

Far-infrared photometry of Comet Halley from NASA's Kuiper Airborne Observatory

Results of 40-160 micron broadband photometry of Comet Halley with apertures of 30-50 arcsecond diameter are reported. Measurements of the spatial distribution of the far-infrared radiation at several wavelengths are also discussed. A preliminary analysis of the data shows the following conclusions: the brightness of the comet varied by nearly a factor of two on two successive days in March 1986, during which the visible brightness also changed substantially and in the same sense. The far-infrared energy distribution varied significantly in this period in the sense that the decrease in flux with increasing wavelengths was significantly shallower on the day when the comet was fainter. The spectral slope on both days is considerably shallower than would be expected from an ensemble of grains most of which were much smaller than the observed wavelengths.

Harvey, P. M.↗
NASA NTRS1987

Measurements of electron attachment lineshapes and cross sections at ultra-low electron energies for CF2Cl2, c-C4F6, c-C4F8 and c-C7F14

Electron-attachment cross sections are reported in the electron energy range 0-160 meV, and at energy resolutions of 7.0 and 7.5 meV (FWHM), for the molecules CF2Cl2 (dichlorodifluoromethane), c-C4F6 (perfluorocyclobutene), c-C4F8 (perfluorocyclobutane), and c-C7F14 (perfluoromethylcyclohexane). Use is made of the Kr photoionization method. Measured attachment lineshapes are deconvoluted from the spectral slit function, and are converted to cross sections by normalization through thermal attachment-rate constants. Comparisons are made with attachment cross sections derived from several independent sets of swarm-measured rate constants, and with collisional ionization (high-Rydberg attachment) data.

Chutjian, A.↗
NASA NTRS1987

Research in particles and fields

Discussed are the research activities in Cosmic Rays, Gamma Rays, and Astrophysical Plasmas supported under NASA Grant NGR 05-002-160. The report is divided into sections which describe the activities, followed by a bibliography. This research program is directed toward the investigation of the astrophysical aspects of cosmic rays and gamma rays and of the radiation and electromagnetic field environment of the Earth and other planets. These investigations are carried out by means of energetic particle and photon detector systems flown on spacecraft and balloons.

Stone, E. C.↗
NASA NTRS1987

Stability relationship for water droplet crystallization with the NASA Lewis icing spray

In order to produce small droplets for icing cloud simulation, high pressure air atomizing nozzles are used. For certain icing testing applications, median drop sizes as small as 5 mm are needed, which require air atomizing pressures greater than 3000 kPa. Isentropic expansion of the ambient temperature atomizing air to atmospheric pressure can result in air stream temperatures of -160 C which results in ice crystals forming in the cloud. To avoid such low temperatures, it is necessary to heat the air and water to high initial temperatures. An icing spray research program was conducted to map the temperatures below which ice crystals form. A soot slide technique was used to determine the presence of crystals in the spray.

Marek, C. John↗
NASA NTRS1988

Stability relationship for water droplet crystallization with the NASA Lewis icing spray nozzle

In order to produce small droplets for icing cloud simulation, high pressure air atomizing nozzles are used. For certain icing testing applications, median drop sizes as small as 5 mm are needed, which require air atomizing pressures greater than 3000 kPa. Isentropic expansion of the ambient temperature atomizing air to atmospheric pressure can result in air stream temperatures of -160 C which results in ice crystals forming in the cloud. To avoid such low temperatures, it is necessary to heat the air and water to high initial temperatures. An icing spray research program was conducted to map the temperatures below which ice crystals form. A soot slide technique was used to determine the presence of crystals in the spray.

Marek, C. John↗