Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distortions & defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of local compositional and structural disorder on vacancy formation in entropy-stabilized oxides from first-principles

Entropic stabilization has evolved into a strategy to create new oxide materials and realize novel functional properties engineered through the alloy composition. Achieving an atomistic understanding of these properties to enable their design, however, has been challenging due to the local compositional and structural disorder that underlies their fundamental structure-property relationships. Here, we combine high-throughput atomistic calculations and linear regression algorithms to investigate the role of local configurational and structural disorder on the thermodynamics of vacancy formation in (MgCoNiCuZn)O-based entropy-stabilized oxides (ESOs) and their influence on the electrical properties. We find that the cation-vacancy formation energies decrease with increasing local tensile strain caused by the deviation of the bond lengths in ESOs from the equilibrium bond length in the binary oxides. The oxygen-vacancy formation strongly depends on structural distortions associated with the local configuration of chemical species. Vacancies in ESOs exhibit deep thermodynamic transition levels that inhibit electrical conduction. By applying the charge-neutrality condition, we determine that the equilibrium concentrations of both oxygen and cation vacancies increase with increasing Cu mole fraction. Our results demonstrate that tuning the local chemistry and associated structural distortions by varying alloy composition acts an engineering principle that enables controlled defect formation in multi-component alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing Mechanical Properties of a Medium-Entropy Alloy by Regulating Mo Addition

Some multi-principal element alloys (MPEAs), including equiatomic, single-phase CrCoNi and CrCoFeMnNi are now widely recognized for their remarkable combinations of pronounced hardening rates, high ductility, and exceptional fracture toughness at room and cryogenic temperatures. To push the limit of hardenability of the medium-entropy alloy, the strategies associated with local lattice distortion or stacking fault energy (SFE) reduction that promote complex heterogeneity and defect dynamics require further investigation. The purposes of this study are to (1) further enhance the mechanical properties of a typical medium-entropy NiCoCr with alloying Mo, and (2) understand the strengthening mechanism of a Mo-added medium-entropy alloys.

Hung, Chang-Yu↗
DOE OSTI2021

Theoretical study of intrinsic defects in cubic silicon carbide 3C-SiC

Using the local moment counter charge (LMCC) method to accurately represent the asymptotic electrostatic boundary conditions within density functional theory supercell calculations, we present a comprehensive analysis of the atomic structure and energy levels of point defects in cubic silicon carbide (3C-SiC). Finding that the classical long-range dielectric screening outside the supercell induced by a charged defect is a significant contributor to the total energy. we describe and validate a modified Jost screening model to evaluate this polarization energy. This leads to bulk-converged defect levels in finite size supercells. With the LMCC boundary conditions and a standard Perdew-Burke-Ernzerhof (PBE) exchange correlation functional, the computed defect level spectrum exhibits no band gap problem: the range of defect levels spans ~2.4 eV, an effective defect band gap that agrees with the experimental band gap. Comparing with previous literature, our LMCC-PBE defect results are in consistent agreement with the hybrid-exchange functional results of Oda et al. [J. Chem. Phys. 139, 124707 (2013)] rather than their PBE results. The difference with their PBE results is attributed to their use of a conventional jellium approximation rather than the more rigorous LMCC approach for handling charged supercell boundary conditions. The difference between standard dft and hybrid functional results for defect levels lies not in a band gap problem but rather in solving a boundary condition problem. The LMCC-PBE entirely mitigates the effect of the band gap problem on defect levels. The more computationally economical PBE enables a systematic exploration of 3C-SiC defects, where, most notably, we find that the silicon vacancy undergoes Jahn-Teller-induced distortions from the previously assumed T d symmetry, and that the divacancy, like the silicon vacancy, exhibits a site-shift bistability in p -type conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Studies on the structure and the magnetic properties of high-entropy spinel oxide (MgMnFeCoNi)Al 2 O 4

The study of high-entropy materials has attracted enormous interest since they could show new functional properties that are not observed in their related parent phases. Here, we report single crystal growth, structure, thermal transport, and magnetic property studies on a novel high-entropy oxide with the spinel structure (MgMnFeCoNi)Al 2 O 4 . We have successfully grown high-quality single crystals of this high-entropy oxide using the optical floating zone growth technique for the first time. The sample was confirmed to be a phase pure high-entropy oxide using x-ray diffraction and energy-dispersive spectroscopy. Through magnetization measurements, we found (MgMnFeCoNi)Al 2 O 4 exhibits a cluster spin glass state, though the parent phases show either antiferromagnetic ordering or spin glass states. Furthermore, we also found that (MgMnFeCoNi)Al 2 O 4 has much greater thermal expansion than its CoAl 2 O 4 parent compound using high resolution neutron Larmor diffraction. We further investigated the structure of this high-entropy material via Raman spectroscopy and extended x-ray absorption fine structure spectroscopy (EXAFS) measurements. From Raman spectroscopy measurements, we observed (MgMnFeCoNi)Al 2 O 4 to display a combination of the active Raman modes in its parent compounds with the modes shifted and significantly broadened. This result, together with the varying bond lengths probed by EXAFS, reveals severe local lattice distortions in this high-entropy phase. Additionally, we found a substantial decrease in thermal conductivity and suppression of the low temperature thermal conductivity peak in (MgMnFeCoNi)Al 2 O 4 , consistent with the increased lattice defects and strain. These findings advance the understanding of the dependence of thermal expansion and transport on the lattice distortions in high-entropy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Active and passive defects in tetragonal tungsten bronze relaxor ferroelectrics

Tetragonal tungsten bronze (TTB) based oxides constitute a large family of dielectric materials which are known to exhibit complex distortions producing incommensurately modulated superstructures as well as significant local deviations from their average symmetry. The local deviations produce diffuse scattering in diffraction experiments. The structure as well as the charge dynamics of these materials are anticipated to be sensitive to defects, such as cation or oxygen vacancies. In this work, in an effort to understand how the structural and charge dynamical properties respond to these two types of vacancy defects, we have performed measurements of dielectric susceptibilities and single crystal diffraction experiments of two types of TTB materials with both ‘filled’ (Ba 2 NdFeNb 4 O 15 and Ba 2 PrFeNb 4 O 15 ) and ‘unfilled’ (Sr 0.5 Ba 0.5 Nb 2 O 6 ) cation sublattices. We also perform these measurements before and after oxygen annealing, which alters the oxygen vacancy concentrations. Surprisingly, we find that many of the diffuse scattering features that are present in the unfilled structure are also present in the filled structure, suggesting that the random fields and disorder that are characteristic of the unfilled structure are not responsible for many of the local structural features that are reflected in the diffuse scattering. Furthermore, oxygen annealing clearly affected both color and dielectric properties, consistent with a diminishment of the oxygen vacancy concentration, but had little effect on observed diffuse patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Probing the local structure of Bi 2 O 3 chemical derivatives: the neglected cation sublattice

High-resolution synchrotron X-ray diffraction data confirm the stabilization of the average structure at ambient temperatures as a defect fluorite structure in ternary and quaternary oxides of Bi 2 O 3 , where some Bi cations are replaced with Dy 3+ and/or Er 3+ , Nb 5+ and W 6+ . Rietveld refinement of the diffraction data indicates that when the larger cation Er 3+ (0.89 Å) is replaced with smaller cations W 6+ (0.42 Å) and/or Nb 5+ (0.48 Å), the unit-cell parameter a, based on the relative ionic radii of the substituents, counterintuitively increases. Total scattering data show that the identity of the cation substituent is important in determining the positions of some Bi cations in the defect fluorite structure. Er 3+ and Dy 3+ cations induce monoclinic-like distortions that extend only locally in the Bi 3+ sublattice. X-ray absorption spectroscopy provides evidence that some Dy cations, in the δ phases, prefer to keep a similar local environment to that in the parent Dy 2 O 3 . W cations are found to be predominantly tetrahedrally coordinated in the δ phases explored in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Minimizing the diffusivity difference between vacancies and interstitials in multi-principal element alloys

Interstitial atoms usually diffuse much faster than vacancies, which is often the root cause for the ineffective recombination of point defects in metals under irradiation. Here, via ab initio modeling of single-defect diffusion behavior in the equiatomic NiCoCrFe(Pd) alloy, we demonstrate an alloy design strategy that can reduce the diffusivity difference between the two types of point defects. The two diffusivities become almost equal after substituting the NiCoCrFe base alloy with Pd. The underlying mechanism is that Pd, with a much larger atomic size (hence larger compressibility) than the rest of the constituents, not only heightens the activation energy barrier ( E a ) for interstitial motion by narrowing the diffusion channels but simultaneously also reduces E a for vacancies due to less energy penalty required for bond length change between the initial and the saddle states. Our findings have a broad implication that the dynamics of point defects can be manipulated by taking advantage of the atomic size disparity, to facilitate point-defect annihilation that suppresses void formation and swelling, thereby improving radiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unveiling the nature of Ga-based chalcogenides for electrical switching selectors

Three-dimensional phase-change memory with stackable crossbar architecture is a promising technology to meet the urgent demands for high-density storage and rapid information processing in the era of explosive data growth. The performance depends strongly on the properties of ovonic threshold switching (OTS) selectors, which control the on/off states of memory units. Amorphous GaS serves as an outstanding OTS material, distinguished by its sizable mobility gap and high crystallization temperature, while the underlying mechanism continues to be inadequately comprehended. Here, in this work, we systematically studied the structural and electronic properties of amorphous Ga-X (X = S/Se/Te) using first-principles calculations. The results show that Ga atoms adopt tetrahedral motifs, while S/Se/Te atoms predominantly exhibit the structure of a distorted triangular pyramid. This structural arrangement is ascribed to the substantial dative bonds formed by the lone-pair electrons of the anions and the vacant sp3 orbitals around Ga atoms. Large mobility gaps (e.g., GaS: 2.43 eV, GaSe: 1.76 eV, GaTe: 1.26 eV) and distinct mid-gap states (e.g., ∼0.66 eV above valence band tail) ensure that these three chalcogenide glasses can be switched on under an external electric field while effectively suppressing leakage current without a bias, and the defect electronic states originate from short, robust Ga-Ga bonds due to the formation of distorted chain-like local structures. Our research elucidates the mechanisms of amorphous Ga-X as OTS materials, enriching the spectrum of electrical switching selectors by incorporating III-VI chalcogenides. This inclusion offers novel opportunities for the refinement and optimization of high-density integrated memory systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mitigation of J–V distortion in CdTe solar cells by Ga-doping of MgZnO emitter

Distortions in the current–voltage curves of CdTe-based thin-film solar cells with MgZnO emitter layers are not uncommon. Even when such distortions are very subtle with standard sunlight, they can be greatly accentuated by the removal of short-wavelength photons with optical filters, and the dark-curve turn-on voltage can be noticeably increased. The strong suggestion is that good J–V curves with full-spectrum light often rely on photogeneration of electrons from trap states in the MgZnO emitter. When the carrier concentration of the CdTe absorber is increased with external doping, there is a corresponding need for a larger MgZnO carrier concentration. Based on the assumption that the emitter carrier concentration needs to be comparable to that of the absorber, Ga-doping of the MgZnO was shown to very nearly eliminate the large filtered-light distortions and is arguably superior to MgZnO that relies on photogeneration. In addition, it was shown that photogeneration and recovery in MgZnO is relatively slow, so that without Ga-doping, the cell efficiency improves gradually for most of an hour in the light, and the turn-on voltage of the dark curve increases on a similar time scale when the light is removed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chain Redistribution Stabilizes Coexistence Phases in Block Copolymer Blends

The nanoscale morphologies of block copolymer (BCP) thin films are determined by chain architecture. Experimental studies of thin film blends of different BCP chain types have demonstrated that blending can stabilize new motifs, such as coexistence phases. Here, we deploy coarsegrained molecular dynamics (MD) simulations in order to better understand the self-assembly behavior of BCP blend thin films. Here, we consider blends of lamella- and cylinder-forming BCP chains, studying their morphological makeup, the chain distribution within the morphology, and the underlying polymer chain conformations. Our simulations show that there are local concentration deviations at the scale of the morphological objects that dictate the local structure, and that BCP chains redistribute within the morphology so as to stabilize the structure. Underlying these effects are measurable distortions in the BCP chain conformations. The conformational freedom afforded by BCP blending stabilizes defects and allows coexistence phases to appear, while also leading to kinetic trapping effects. These results highlight the power of blending in designing the morphology that forms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization and repair of core gap manufacturing defects for wind turbine blades

Various wind turbine blade components, such as shear webs and skins, commonly use fiber-reinforced composite sandwich structures with a core material like balsa or foam. During manufacturing, core gap defects may result from the misalignment of adjacent foam or balsa core sheets in the blade mold. It is important to understand the influence that core gaps have on the structural integrity of wind turbine blades and how to mitigate their influence. This research characterized the effects of core gap defects at the manufacturing and mechanical levels for both epoxy and next-generation thermoplastic composites. Common repair methods were assessed and compared. Multiple defect sizes were compared using temperature data gathered with thermocouples embedded during manufacturing to core gap defect characteristics obtained using image-mapping techniques, optical microscopy, and mechanical characterization by long beam flexure. Results showed that peak exothermic temperatures during curing were closely related to core gap size. The long beam flexure tests determined that transverse core gaps under pure bending loads can have a substantial effect on the ultimate facesheet strength of both epoxy and thermoplastic composite sandwich structures (up to 25% strength reduction), although the size of the defect itself had less of an influence on the magnitude of the strength reduction. The supporting image-mapping techniques indicated that the distortion of the composite facesheets by the core gaps contributed to the premature failures. The repair methods used in this study did very little to improve the ultimate strength of the sandwich panels that previously had core gap defects. The repair of the thermoplastic panel resulted in a further loss in ultimate facesheet strength. This research demonstrated that there is a vital need for the development of a compatible thermoplastic polymer repair resin system and appropriate resin specific repair procedures for the next generation of recyclable thermoplastic wind blades.

17 WIND ENERGY↗
DOE OSTI2020

Robust superconductivity intertwined with charge density wave and disorder in Pd-intercalated ErTe 3

Pd-intercalated ErTe 3 is studied as a model system to explore the effect of "intertwined" superconducting and charge density wave (CDW) orders. Despite the common wisdom that superconductivity emerges only when CDW is suppressed, we present data from STM and AC susceptibility measurements that show no direct competition between CDW order and superconductivity. Both coexist over most of the intercalation range, with uniform superconductivity over length scales that exceed the superconducting coherence length. This is despite persisting short-range CDW order and increased scattering from the Pd intercalation. While superconductivity is insensitive to local defects in either of the bi-directional CDWs, vestiges of the Fermi-level distortions are observed in the properties of the superconducting state.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Single-Particle Insights Into the Electronic Structure and Enhanced Stability of CsPbBr 3 /FAPbBr 3 Core/Crown Nanoplatelets at the Nanometer Scale

Colloidal perovskite nanoplatelets (NPLs), despite their exceptional optoelectronic properties, face significant challenges due to their intrinsic instability and trap-assisted non-radiative recombination. Although many studies employing surface engineering, such as selecting ligands or coating to passivate defects, have demonstrated improved optoelectronic properties, these enhancements are typically inferred from bulk-ensemble measurements; the effects at the single-particle level remain elusive. Here, we conduct single-particle-level studies using scanning tunneling spectroscopy (STS) on a unique core–crown system, CsPbBr 3 @FAPbBr 3 NPLs, where the lateral surfaces of the CsPbBr 3 core are coated with an FAPbBr 3 crown. Experimental density-of-states (DOS) analysis reveals a 47% reduction in deep-trap states in core-crown NPLs compared to core-only NPLs, consistent with nearly two-fold enhancements in photoluminescence quantum yields. Progressive I–V sweep measurements demonstrate superior electrical stability in core-crown NPLs, preserving band structure with minimal degradation, while core-only NPLs exhibit rapid bandgap shrinkage and trap formation. Density functional theory (DFT) calculations indicate that FA incorporation distorts Pb octahedral lattice, widening the bandgap. This study elucidates how surface engineering modulates charge localization, passivates defects, and enhances stability at the single-particle level. Moreover, by uncovering bias-induced trap states in single unpassivated NPLs, this study establishes a precise, robust approach for characterizing emerging perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

X-ray nano-imaging of defects in thin film catalysts via cluster analysis

Functional properties of transition-metal oxides strongly depend on crystallographic defects; crystallographic lattice deviations can affect ionic diffusion and adsorbate binding energies. Scanning x-ray nanodiffraction enables imaging of local structural distortions across an extended spatial region of thin samples. Yet, localized lattice distortions remain challenging to detect and localize using nanodiffraction, due to their weak diffuse scattering. Here, in this study, we apply an unsupervised machine learning clustering algorithm to isolate the low-intensity diffuse scattering in as-grown and alkaline-treated thin epitaxially strained SrIrO 3 films. We pinpoint the defect locations, find additional strain variation in the morphology of electrochemically cycled SrIrO 3 , and interpret the defect type by analyzing the diffraction profile through clustering. Our findings demonstrate the use of a machine learning clustering algorithm for identifying and characterizing hard-to-find crystallographic defects in thin films of electrocatalysts and highlight the potential to study electrochemical reactions at defect sites in operando experiments.

42 ENGINEERING↗
DOE OSTI2024

The role of the dopant in the electronic structure of erbium-doped TiO 2 for quantum emitters

Erbium-doped TiO 2 materials are promising candidates for advancing quantum technologies, necessitating a thorough understanding of their electronic and crystal structures to tailor their properties and enhance coherence times. This study explored epitaxial erbium-doped rutile TiO 2 films deposited on r-sapphire substrates using molecular beam epitaxy. Photoluminescence excitation spectroscopy demonstrated decreasing photoluminescence lifetimes with erbium doping, indicating limited optical coherence times. Lattice distortions associated with Er 3+ were probed by x-ray absorption spectroscopy, indicating that erbium primarily occupies Ti 4+ sites and influences oxygen vacancies. Significant lattice distortions in the higher-order shells and apparent full coordination around erbium suggest that additional defects are likely prevalent in these regions. These findings indicate that defects contribute to limited coherence times by introducing alternative decay pathways, leading to shorter photoluminescence lifetimes.

Crystallographic defects↗
DOE OSTI2023

Origins of epitaxial macro-terraces and macro-steps on GaN substrates

Localized lattice distortions in GaN substrates can serve as nucleation sites for epitaxial macro-steps and macro-terraces. These detrimental macro-scale features give rise to optically hazy homoepitaxial GaN surfaces. After nucleating, these macro-features grow laterally along the surface and coalesce, leading to significant coverage of the wafer surface. Dot-core GaN substrates consisting of a periodic array of cores were used as a defect-engineered system, where dislocations are intentionally concentrated at the cores. The high density of threading dislocations at the cores induced localized lattice distortions. Here, these distortions are associated predominantly with lattice tilt on the order of hundreds of arcsec across ~0.5 mm laterally along the wafer surface. The resulting macro-features that nucleated at these localized distorted sites were made up of macro-terraces with lengths ranging ~30–~150 μm and macro-step heights ranging ~200–~400 nm. Another source of localized distortion was threading screw dislocations or GaN nanopipes that resulted in spiral growth and hillock formation. Based on x-ray topography and optical microscopy measurements, we speculate that the coalescence of hillocks evolves into macro-terraces and macro-steps. While previous studies focused on the substrate miscut as a means to control macro-feature formation, we show that localized lattice tilt from defects is another important contributor to macro-feature formation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scalable mechanochemical synthesis of high-quality Prussian blue analogues for high-energy and durable potassium-ion batteries

Prussian blue analogues (PBAs) are recognized as promising cathode materials for potassium-ion batteries (PIBs), particularly the low-cost and high-energy K 2 Mn[Fe(CN) 6 ](KMnF). However, conventional solution-based synthesis inevitably introduces [Fe(CN) 6 ] 4− defects and lattice water while suffering low synthesis efficiency, unfavorable to the improvement of electrochemical performance and scalability. Here, in this work, we report a simple solvent-free mechanochemical strategy for the synthesis of a wide variety of K 2 M[Fe(CN) 6 ] (M = Mn, Mg, Ca, etc.) with negligible defects and water, and it is unprecedented to achieve kilogram-level products of high-quality KMnF within just 10 minutes. The as-prepared KMnF delivers a high energy density of 590 Wh kg −1 at 0.2 C and exhibits an astonishing stability over 10 000 cycles and rate ability up to 50 C in a potassium metal half-cell. Encouragingly, a high-areal-capacity pouch cell with 2.2 mAh cm −2 (16.5 mg cm −2 ) exhibits a capacity retention of 80.7% after 500 cycles. Furthermore, systematic in situ characterization reveals underlying mechanism insights into structure–performance relationships. Specifically, the fully coordinated Mn–N 6 octahedral configuration effectively suppresses Mn 3+ Jahn–Teller distortion, enabling reversible phase transitions under both high-voltage and long-term cycling conditions. In addition, minimal defects provide sufficient redox centers, while the continuous three-dimensional framework facilitates rapid K + diffusion kinetics. This work provides a new opportunity for the ultrafast, universal and scalable synthesis of high-quality PBAs, facilitating the practical application of PIBs while enabling precise structural and compositional design of novel PBAs.

Mechanochemical method↗
DOE OSTI2025

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗