Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamics of Molecular Collisions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Sputtering Erosion in the Ion Thruster

During the first phase of this research, the sputtering yields of molybdenum by low energy (100 eV and higher) xenon ions were measured by using the methods of secondary neutral mass spectrometry (SNMS) and Rutherford backscattering spectrometry (RBS). However, the measured sputtering yields were found to be far too low to explain the sputtering erosions observed in the long-duration tests of ion thrusters. The only difference between the sputtering yield measurement experiments and the ion thruster tests was that the later are conducted at high ion fluences. Hence, a study was initiated to investigate if any linkage exists between high ion fluence and an enhanced sputtering yield. The objective of this research is to gain an understanding of the causes of the discrepancies between the sputtering rates of molybdenum grids in an ion thruster and those measured from our experiments. We are developing a molecular dynamics simulation technique for studying low-energy xenon ion interactions with molybdenum. It is difficult to determine collision sequences analytically for primary ions below the 200 eV energy range where the ion energy is too low to be able to employ a random cascade model with confidence and it is too high to have to consider only single collision at or near the surface. At these low energies, the range of primary ions is about 1 to 2 nm from the surface and it takes less than 4 collisions on the average to get an ion to degrade to such an energy that it can no longer migrate. The fine details of atomic motion during the sputtering process are revealed through computer simulation schemes. By using an appropriate interatomic potential, the positions and velocities of the incident ion together with a sufficient number of target atoms are determined in small time steps. Hence, it allows one to study the evolution of damages in the target and its effect on the sputtering yield. We are at the preliminary stages of setting up the simulation program.

Ray, Pradosh K.↗
NASA NTRS1997

Data Base for CFD Validation

The flow behind the shock wave formed around objects which fly at hypervelocity behaves differently from that of a perfect gas. Molecules become vibrationally excited, dissociated, and ionized. The hot gas may emit or absorb radiation. When the atoms produced by dissociation reach the wall surface, chemical reactions, including recombination, may occur. The thermochemical phenomena of vibration, dissociation, ionization, surface chemical reaction, and radiation are referred to commonly as high-temperature real-gas phenomena. The phenomena cause changes in the dynamic behavior of the flow and the surface pressure and heat transfer distribution around the object. The character of a real gas is described by the internal degrees of freedom and state of constituent molecules; nitrogen and oxygen for air. The internal energy states, rotation, vibration and electronic, of the molecules are excited and, in the limit, the molecular bonds are exceeded and the gas dissociated into atomic and, possibly, ionic constituents. The process of energy transfer causing excitation, dissociation and recombination is a rate process controlled by particle collisions. Binary, two-body, collisions are sufficient to cause internal excitation, dissociation and ionization while three-body collisions are required to recombine the particles into molecular constituents. If the rates of energy transfer are fast with respect to the local fluid dynamic time scale the gas is in, or nearly in, equilibrium. If the energy transfer rates are very slow the gas can be described as frozen. In all other instances, wherein any of the energy exchange rates are comparable to the local fluid time scale, the gas will be thermally or chemically reacting and out of equilibrium. Real gas thermochemical nonequilibrium processes are important in the determination of aerodynamic heating; both convective (including wall catalytic effects) and radiative heating. To illustrate this we consider the hypervelocity flow over a bluff body typical of an atmospheric entry vehicle or an aerospace transfer vehicle (ASTV). The qualitative aspects of a hypersonic flow field over a bluff body are discussed in two parts, forebody and afterbody, with attention to which particular physical effects must be included in an analysis. This will indicate what type of numerical modeling will be adequate in each region of the flow. A bluff forebody flow field is dominated by the presence of the strong bow shock wave and the consequent heating, and chemical reaction of the gas. At high altitude hypersonic flight conditions the thermal excitation and chemical reaction of the gas occur slowly enough that a significant portion of the flow field is in a state of thermochemical nonequilibrium. A second important effect is the presence of the thick boundary layer along the forebody surface. In this region there are large thermal and chemical species gradients due to the interaction of the gas with the wall. Also at high altitudes the shock wave and the boundary layer may become so thick that they merge; in this case the entire shock layer is dominated by viscous effects.

Deiwert, George S.↗
DOE OSTI2025

Long-Range Interaction between Molecules with Electronic Degeneracy: Beyond the Born–Oppenheimer Approximation

Long-range intermolecular interaction plays an essential role in (ultra)cold collisions. For monomers with degenerate electronic states, an accurate description of the long-range interaction can be challenging due to the potential breakdown of the Born–Oppenheimer approximation. In this work, we developed a general method to construct long-range interaction potential energy surfaces (IPESs) between arbitrary molecules using the degenerate perturbation theory of Schrödinger. To further simplify the application of this method, a group-theoretical method is introduced to identify nonzero components of electrostatic properties of monomers, especially for the nonlinear molecules. To demonstrate this approach, we report the long-range IPESs of the O( 3 P)–OH( 2 Π) and OH( 2 Π)–OH( 2 Π) systems. The excellent agreement with ab initio calculations in large separations, even near electronic degeneracies, confirms the accuracy of our approach. The method is expected to lay the groundwork for the accurate investigation of (ultra)cold collisional dynamics involving open-shell species.

ab initio calculations↗
DOE OSTI2023

Hydrogen irradiation-driven computational surface chemistry of lithium oxide and hydroxide

We have investigated, using molecular dynamics, the surface chemistry of hydrogen incident on the amorphous and crystalline lithium oxide and lithium hydroxide surfaces upon being slowed down by a collision cascade and retained in the amorphous surface of either Li 2 O or LiOH. We looked for the bonding of H to the resident structures in the surface to understand a possible chain of chemical reactions that can lead to surface transformation upon H atom impact. Our findings, using Density-Functional Theory (DFT) trained ReaxFF force field/electronegativity equalization method potentials, stress the importance of inclusion of polarization in the dynamics of a Li–O–H system, which is also illustrated by DFT energy minimization and quantum–classical molecular dynamics using tight binding DFT. The resulting polar-covalent chemistry of the studied systems is complex and very sensitive to the instantaneous positions of all atoms as well as the ratio of concentrations of various resident atoms in the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Diffusion coefficients in the envelopes of white dwarfs

The diffusion of elements is a key process in understanding the unusual surface composition of white dwarfs and their spectral evolution. The diffusion coefficients of Paquette et al. have been widely used to model diffusion in white dwarfs. In this work, we perform new calculations of the coefficients of interdiffusion and ionic thermal diffusion with (1) a more advanced model that uses a recent modification of the calculation of the collision integrals that is more suitable for the partially ionized, partially degenerate, and moderately coupled plasma and (2) classical molecular dynamics. The coefficients are evaluated for silicon and calcium in white dwarf envelopes of hydrogen and helium. A comparison of our results with Paquette et al. shows that the latter systematically underestimates the coefficient of interdiffusion yet provides reliable estimates for the relatively weakly coupled plasmas found in nearly all types of stars, as well as in white dwarfs with hydrogen envelopes. In white dwarfs with cool helium envelopes (${T}_{\mathrm{eff}}$ < 15,000 K), the difference grows to more than a factor of two. We also explored the effect of the ionization model used to determine the charges of the ions and found that it can be a substantial source of discrepancy between different calculations. Finally, we consider the relative diffusion timescales of Si and Ca in the context of the pollution of white dwarf photospheres by accreted planetesimals and find factor of ≳3 differences between calculations based on Paquette et al. and our model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Dislocation dynamics in polycrystalline materials

An extension of the dislocation dynamics method to polycrystalline materials is presented with emphasis on handling interactions between dislocations and grain boundaries. The key new features of the method include: (1) a grain boundary detection algorithm, (2) new dislocation emission criteria based on power dissipation and area growth, (3) mobility of dislocations at grain boundaries, and (4) extension of topological operations e.g. mesh adaption, collision, and dissociation to handle dislocations interacting with grain boundaries. Furthermore, verification and validation examples are executed to compare our calculations with existing analytic methods, molecular dynamics simulations, and experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multichannel dynamics in the OH+ n -butane reaction revealed by crossed-beam slice imaging and quasiclassical trajectory calculations

Multidimensional reactions present various channels that can exhibit very different dynamics and give products of varying subsequent reactivity. Here, we present a combination of experiment and theory to reveal the dynamics of hydrogen abstraction by OH radical at primary and secondary sites in n-butane at a collision energy of 8 kcal/mol. Crossed molecular beam slice imaging experiments unequivocally probe the secondary abstraction channel showing backward angular distributions with mild energy release to product translation, which are accurately captured by trajectory calculations using a specific-reaction-parameter Hamiltonian. Additionally, experiments containing both reaction channels indicate a less marked backward character in the angular distribution, whose origin is shown by trajectory calculations to appear as an evolution toward more sideways scattering from the secondary to primary channel. While the two channels have markedly different angular distributions, their energy release is largely comparable, showing ample energy release into the water product. The synergistic combination of crossed-beam imaging and trajectories opens the door to detailed reaction-dynamics studies of chemical reactions with ever-increasing complexity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simulations of classical three-body thermalization in one dimension

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of pointlike particles, typically the dominant process for reaching thermal equilibrium in higher-dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential V ij ∝ 1/|x i –x j | n or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature T toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low-density limit. For the inverse power-law potential, the rate of thermalization is proportional to ρ 2 ⁢T$\frac{1}{2}$ – $\frac{1}{n}$, where ρ is the number density. Furthermore, the corresponding proportionality constant decreases with increasing n.

1-dimensional systems↗
DOE OSTI2022

Silicon nanocluster anion-argon cation recombination via hybrid continuum-molecular dynamics calculations

Prediction of the charge distribution on particles in an aerosol is critical not only in electrical mobility based characterization methods, but also in understanding the role that charging plays in particle growth in gas phase synthesis reactors. The latter is particularly important in non-thermal plasma synthesis reactors, wherein nanoclusters form and grow from vapor phase precursors in a high electron and high ion density environment. In plasmas, because free electrons are much less massive and much more mobile than positive gas ions, nanocluster charge distributions are biased negative. Furthermore, neutral or even positively charged nanoclusters may exist, depending on the rate of nanocluster-gas ion recombination, and nanocluster-nanocluster collisions may greatly contribute to nanocluster growth if not Coulombically suppressed.

42 ENGINEERING↗
DOE OSTI2026

Dynamics of iodine geminate recombination in supercritical xenon solvent: Caging effect

Understanding the dynamics of chemical reactions in solutions is vital, as their rates and kinetics are significantly affected by the solvent environment. Supercritical solvents offer extensive applications in chemical reactions by enabling the manipulation of the solution environment. Here, in this study, we investigate the geminate recombination of iodine in a supercritical xenon solvent by using ReaxFF-based molecular dynamics simulations. Our findings reveal that the highest iodine recombination rate occurs near supercritical conditions, while lower-pressure conditions lead to reduced collision rates and unstable recombination, and higher-pressure conditions hinder iodine diffusion, resulting in a lower recombination rate. Our analysis shows that the xenon local density at the time of recombination is at least 2.5 times higher than the global density, confirming the presence of xenon clusters surrounding the Iodine atoms. This observation is further supported by coordination number analysis, which confirms an elevated xenon local density during recombination. In addition, the correlation between the total energy of xenon atoms within a cluster and recombined iodine atoms underscores the kinetic energy transfer process, validating the occurrence of geminate recombination. The excess kinetic energy from the recombining iodine atoms is transferred to the surrounding xenon atoms. Our examination of geminate recombination demonstrates that iodine atoms confined within xenon clusters—whether through manual insertion of atoms or the fast dissociation of an iodine molecule within xenon clusters—are more likely to recombine as primary geminate recombination. However, extending the iodine molecule dissociation time allows iodine atoms to diffuse out of the cluster, and the recombination to shift toward secondary geminate recombination.

Cage effect↗
DOE OSTI2024

Multinucleon transfer in 48 Ti + 48 Ti collisions at 11.5 MeV/nucleon

In this work, experimental data of projectile fragment distributions from a preliminary experimental study of the reaction of 11.5 MeV/nucleon 48 Ti on 48 Ti analyzed with the MARS recoil separator at the Cyclotron Institute of Texas A&M University are presented. Production cross sections, momentum distributions and excitation-energy distributions are extracted and compared with calculations with the Deep Inelastic Transfer (DIT) model and the Constrained Molecular Dynamics model (CoMD). Despite the limited extent of the present dataset, an overall agreement of the models with the data is found pointing at the prevailing nucleon-exchange character of the collisions at this energy.

Souliotis, Georgios↗
NASA NTRS1993

Momentum loss in proton-nucleus and nucleus-nucleus collisions

An optical model description, based on multiple scattering theory, of longitudinal momentum loss in proton-nucleus and nucleus-nucleus collisions is presented. The crucial role of the imaginary component of the nucleon-nucleon transition matrix in accounting for longitudinal momentum transfer is demonstrated. Results obtained with this model are compared with Intranuclear Cascade (INC) calculations, as well as with predictions from Vlasov-Uehling-Uhlenbeck (VUU) and quantum molecular dynamics (QMD) simulations. Comparisons are also made with experimental data where available. These indicate that the present model is adequate to account for longitudinal momentum transfer in both proton-nucleus and nucleus-nucleus collisions over a wide range of energies.

Khan, Ferdous↗
DOE OSTI2024

Spinodal enhancement of fluctuations in nucleus-nucleus collisions

Subensemble Acceptance Method (SAM) [1, 2] is an essential link between measured event-by-event fluctuations and their grand canonical theoretical predictions such as lattice QCD. The method allows quantifying the global conservation law effects in fluctuations. In its basic formulation, SAM requires a sufficiently large system such as created in central nucleus-nucleus collisions and sufficient space-momentum correlations. Directly in the spinodal region of the First Order Phase Transition (FOPT) different approximations should be used that account for finite size effects. Thus, we present the generalization of SAM applicable in both the pure phases, metastable and unstable regions of the phase diagram [3]. Obtained analytic formulas indicate the enhancement of fluctuations due to crossing the spinodal region of FOPT and are tested using molecular dynamics simulations. A rather good agreement is observed. Using transport model calculations with interaction potential we show that the spinodal enhancement of fluctuations survives till the later stages of collision via the memory effect [4]. However, at low collision energies the space-momentum correlation is not strong enough for this signal to be transferred to second and third order cumulants measured in momentum subspace. This result agrees well with recent HADES data on proton number fluctuations at $\sqrt{S_{NN}}$ = 2.4 GeV which are found to be consistent with the binomial momentum space acceptance [5].

Poberezhnyuk, Roman↗
DOE OSTI2025

From the laboratory to space: unveiling isomeric diversity of C 5 H 2 in the reaction of tricarbon (C 3 , X 1 Σ g + ) with the vinyl radical (C 2 H 3 , X 2 A′)

By connecting laboratory dynamics with cosmic observables, this work highlights the critical role of reactions between highly reactive species in shaping the molecular inventory of the interstellar medium and opens new windows into the spectroscopically elusive corners of astrochemical complexity. The gas phase formation of distinct C 5 H 2 isomers is explored through the bimolecular reaction of tricarbon (C 3 , X 1 Σ + g ) with the vinyl radical (C 2 H 3 , X 2 A′) at a collision energy of 44 ± 1 kJ mol −1 employing the crossed molecular beam technique augmented by electronic structure and Rice–Ramsperger–Kassel–Marcus (RRKM) calculations. This barrierless and exoergic reaction follows indirect dynamics and is initiated by the addition of tricarbon to the radical center of the vinyl radical forming a Cs symmetric doublet collisional complex (CCCCHCH 2 ). Subsequent low-barrier isomerization steps culminate in the resonantly stabilized 2,4-pentadiynyl-1 radical (CHCCCCH 2 ), which decomposes via atomic hydrogen loss. Statistical calculations identify linear, triplet pentadiynylidene (p2, X 3 Σ − g ) as the dominant product, while singlet carbenes ethynylcyclopropenylidene (p1, X 1 A′), pentatetraenylidene (p3, X 1 A 1 ), and ethynylpropadienylidene (p4, X 1 A′) are formed with lower branching ratios. The least stable isomer, 2-cyclopropen-1-ylidenethenylidene (‘eiffelene’; p5, X 1 A 1 ), remains thermodynamically feasible, but exhibits negligible branching ratios. Two isomers detected in TMC-1 to date (p1 and p3) possess significant dipole moments making them amenable to radio telescopic observations, whereas linear pentadiynylidene (p2; D ∞h ) is only traceable via infrared spectroscopy or through its cyanopentadiynylidene derivative (HCCCCCCN). This study highlights the isomer diversity accessed in the low temperature hydrocarbon chemistry of barrierless and exoergic bimolecular reactions involving two unstable, reactants in cold molecular clouds.

Medvedkov, Iakov A. [University of Hawai'i at Mano↗
NASA NTRS1993

Calculation of molecular excitation rates

State-to-state collisional excitation rates for interstellar molecules observed by radio astronomers continue to be required to interpret observed line intensities in terms of local temperatures and densities. A problem of particular interest is collisional excitation of water which is important for modeling the observed interstellar masers. In earlier work supported by a different NASA Grant, excitation of water in collisions with He atoms was studied; after many years of successively more refined calculations that problem now seems to be well understood, and discrepancies with earlier experimental data for related (pressure broadening) phenomena are believed to reflect experimental errors. Because of interstellar abundances, excitation by H2, the dominant interstellar species, is much more important than excitation by He, although it has been argued that rates for excitation by these are similar. Under the current grant theoretical study of this problem has begun which is greatly complicated by the additional degrees of freedom which must be included both in determining the interaction potential and also in the molecular scattering calculation. We have now computed the interaction forces for nearly a thousand molecular geometries and are close to having an acceptable global fit to these points which is necessary for the molecular dynamics calculations. Also, extensive modifications have been made to the molecular scattering code, MOLSCAT. These included coding the rotational basis sets and coupling matrix elements required for collisions of an asymmetric top with a linear rotor. A new method for numerical solution of the coupled equations has been incorporated. Because of the long-ranged nature of the water-hydrogen interaction it is necessary to integrate the equations to rather large intermolecular separations, and the integration methods previously available in MOLSCAT are not ideal for such cases. However, the method used by Alexander in his HIBRIDON code is particularly suited for such cases. We have obtained this code and incorporated that part which solves the coupled differential equations as an option in the MOLSCAT program.

Flynn, George↗
DOE OSTI2020

Stratification of polymer mixtures in drying droplets: Hydrodynamics and diffusion

In this work, we study the evaporation-induced stratification of a mixture of short and long polymer chains in a drying droplet using molecular simulations. We systematically investigate the effects of hydrodynamic interactions (HI) on this process by comparing hybrid simulations accounting for HI between polymers through the multiparticle collision dynamics technique with free-draining Langevin dynamics simulations neglecting the same. We find that the dried supraparticle morphologies are homogeneous when HI are included but are stratified in core–shell structures (with the short polymers forming the shell) when HI are neglected. The simulation methodology unambiguously attributes this difference to the treatment of the solvent in the two models. We rationalize the presence (or absence) of stratification by measuring phenomenological multicomponent diffusion coefficients for the polymer mixtures. The diffusion coefficients show the importance of not only solvent backflow but also HI between polymers in controlling the dried supraparticle morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A crossed molecular beams and computational study on the unusual reactivity of banana bonds of cyclopropane (c-C 3 H 6 ; X 1 A$^{'}_{1}$ ) through insertion by ground state carbon atoms (C( 3 P j ))

The mechanism and chemical dynamics of the reaction of ground electronic state atomic carbon C( 3 P j ) with cyclopropane c-C 3 H 6 (X 1 A$^{'}_{1}$) have been explored by combining crossed molecular beams experiments with electronic structure calculations of the pertinent triplet C 4 H 6 potential energy surface and statistical computations of product branching ratios under single-collision conditions. The experimental findings suggest that the reaction proceeds via indirect scattering dynamics through triplet C 4 H 6 reaction intermediate(s) leading to C 4 H 5 product(s) plus atomic hydrogen via a tight exit transition state, with the overall reaction exoergicity evaluated as 231 ± 52 kJ mol –1 . The calculations indicate that C( 3 P j ) can easily insert into one of the three equivalent C–C ‘banana’ bonds of cyclopropane overcoming a low barrier of only 2 kJ mol –1 following the formation of a van der Waals reactant complex stabilized by 15 kJ mol –1 . The carbon atom insertion into one of the six C–H bonds is also feasible via a slightly higher barrier of 5 kJ mol –1 . Here, these results highlight an unusual reactivity of cyclopropane's banana C–C bonds, which behave more like unsaturated C–C bonds with a π-character than saturated σ C–C bonds, which are known to be generally unreactive toward the ground electronic state atomic carbon such as in ethane (C 2 H 6 ). The statistical theory predicts the overall product branching ratios at the experimental collision energy as 50% for 1-butyn-4-yl, 33% for 1,3-butadien-2-yl, i-C 4 H 5 , and 11% for 1,3-butadien-1-yl, n-C 4 H 5 , with i-C 4 H 5 (230 kJ mol –1 below the reactants) favored by the C–C insertion providing the best match with the experimentally observed reaction exoergicity. The C( 3 P j ) + c-C 3 H 6 reaction is predicted to be a source of C 4 H 5 radicals under the conditions where its low entrance barriers can be overcome, such as in planetary atmospheres or in circumstellar envelopes but not in cold molecular clouds. Both i- and n-C 4 H 5 can further react with acetylene eventually producing the first aromatic ring and hence, the reaction of the atomic carbon with c-C 3 H 6 can be considered as an initial step toward the formation of benzene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗