Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC FIELD STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Bulk charging and breakdown in electron-irradiated polymers

High energy electron irradiations were performed in an experimental and theoretical study of ten common polymers. Breakdowns were monitored by measuring currents between the electrodes on each side of the planar samples. Sample currents as a function of time during irradiation are compared with theory. Breakdowns are correlated with space charge electric field strength and polarity. Major findings include evidence that all polymers tested broke down, breakdowns remove negligible bulk charge and no breakdowns are seen below 20 million V/m.

Frederickson, A. R.↗

Measured spectral amplitude of lightning sferics in the HF, VHF, and UHF bands

An experimental study was carried out to measure the spectral amplitude of lightning sferics at 22.5 MHz, 225 MHz, and 2.25 GHz. This effort included the detection, storage, and analysis of RF emission data to accurately determine the relative electric field strength produced by the lightning associated with a typical local thunderstorm. These measured spectral amplitudes are normalized and plotted relative to similar data from other investigators. These data support a 1/F to the 2nd to 1/F to the 3rd slope for sferics at frequencies above the HF range.

Shumpert, T. H.↗

Warm fog dispersal

The charged particle generator was further tested after some design modification. The generator performance was measured with additional instrumentation and found to confirm previous measurements. Plans for a field testing were than developed. The overall status of the program and the field test plans were presented to a group of atmospheric scientists and electrostatic experts at the NASA/MSFC sponsored USRA Workshop on Electrostatic Fog Dispersal at NCAR, Boulder, Colorado discussed in previous sections. The recommendations from this workshop are being evaluated as to whether NASA should proceed with the field test or whether further theoretical research on the phenomenon of electrostatic fog dispersal and additional development of the charged particle generator should be carried out. Information obtained from the USRA Workshop clearly identified three physical mechanisms that could possibly influence the fog dispersal process, which heretofore have not been considered, and which may provide additional insight to the direction of further fog dispersal work. These mechanisms are: the effect of corona discharge on the electric field strength at the surface, the influx of fog into the cleared volume by turbulent diffusion, and the increase in supersaturation as liquid water is removed, activating haze particles, and thus generating more fog. Plans are being formulated to investigate these mechanisms.

Frost, W.↗

On the anticorrelation of the electric field and peak electron energy within an auroral arc

The present investigation is concerned with an example of a strongly anticorrelated electric field and particle precipitation, taking into account an application of an extended version of the model of Evans et al. (1977) to the data. A striking feature of the data reported is the high degree of anticorrelation between electric field strength and peak precipitating electron energy. A simple model consisting of a constant current traversing a region in which the conductivities increase in proportion to ionospheric energy deposition provides a qualitative explanation of the observations. However, when the effects of neutral winds, ionization transport, Hall currents, and arc motion, and the nonlinearity of the relationship between peak precipitating electron energy and equilibrium are considered, the conclusions become less clear.

Mallinckrodt, A. J.↗

A study of the applicability of nucleation theory to quasi-thermodynamic transformations of second and higher Ehrenfest-order

Transient and steady-state phenomena in temperature, stress, and electric, field intensity in ferroelectric polymers were investigated. The application and extension of the theory in the primary stage to the polarization domain nucleation and growth in ferroelectric polymers were developed. The kinetics of this growth were investigated. Expressions describing nucleation under the influence of an electric field were found through the expansion of the Gibbs' free energy in a Maclaurin series. The series was expanded in the electric field strength rather than the degree of undercooling. The resulting expressions were manipulated and applied to the case of nucleation of polarized domains in ferroelectric polymers. The kinetics of the nucleation and growth of polarized domains are also investigated. This was accomplished through the modification of the Johnson-Mehl-Avrami treatment of crystallization kinetics to be applicable to the growth of polarization domains in ferroelectric materials.

Barker, R. E., Jr.↗

A flare-induced cascade model of gamma-ray bursts

An analytical model is developed for the source of gamma ray bursts as a stellar flare in the magnetosphere of a neutron star. It is suggested that the loss of energy through synchrotron radiation experienced by electrons moving through a sufficiently strong magnetic field at a large pitch angle may not be regained. Instead, pulsar theory is applied to show that the acceleration of electrons in an electric field parallel to the magnetic field will rapidly be inhibited by curvature radiation as the loop experiences a reconnection. It is shown that electrons passing through a curvature with a radius of one million with an electric field strength of 10 billion e.s.u. will emit photons with energies of up to 10 to the 12.6 eV by curvature radiation. The photons, gamma rays, would annihilate in the magnetosphere, which they cannot escape. The resulting cascade of electron-positron particles would eventually produce photons of sufficiently low energy to escape. Upper and low bounds are estimated for the resulting emission spectrum, which would vary according to the magnetic field geometry. The model explains the observed 511 keV annihilation line and the optical radiation which at times accompanies gamma-ray bursts.

Sturrock, P. A.↗

Near fields in the vicinity of pulsed electron beams in space

Most measurements of the radio frequency emissions from artificial electron beams in space have been made in close proximity to the beam. This paper presents theory and results for the near-field radiation associated with the operation of a pulsed electron beam, taking into account the effects of the ionospheric plasma. The beam is modeled as an infinite train of square-wave pulses and the radiation is obtained by adding coherently the radiation from each individual electron in the idealized helical trajectory assumed by the beam as it traverses the magnetized plasma. The mathematical solution is obtained by taking the Fourier transform in space and time of Maxwell's equations and the driving modulated beam current, and then taking the inverse transform of the resulting electric field. Typical electric field strengths are presented for a range of modulation frequencies extending from below the ion cyclotron to the electron cyclotron frequency.

Harker, K. J.↗

A numerical modeling study of a Montana thunderstorm. I - Model results versus observations involving nonelectrical aspects. II - Model results versus observations involving electrical aspects

Model results and the observed cloud behavior are examined in terms of nonelectrical and electrical aspects of a thunderstorm. The characteristics of the two-dimensional, time-dependent atmospheric electricity model used to simulate the cloud observations of July 19, 1981 in Miles City, Montana are described. The interactions of the dynamics and microphysics of the cloud with the charge separation mechanisms are analyzed. It is observed that the model accurately represents many of the observed characteristics of the cloud; however, the cloud base height, maximum liquid water content, and the time from first formation of precipitation until it reaches the ground are not accurately modeled. It is found that the model adequately represents the electrical field structure of the cloud and the electrical field strengths.

Helsdon, John H., Jr.↗

Evaluation and mitigation of lightning hazards to the space shuttle Solid Rocket Motors (SRM)

The objective was to quantify electric field strengths in the Solid Rocket Motor (SRM) propellant in the event of a worst case lightning strike. Using transfer impedance measurements for selected lightning protection materials and 3D finite difference modeling, a retrofit design approach for the existing dielectric grain cover and railcar covers was evaluated and recommended for SRM segment transport. A safe level of 300 kV/m was determined for the propellant. The study indicated that a significant potential hazard exists for unprotected segments during rail transport. However, modified railcar covers and grain covers are expected to prevent lightning attachment to the SRM and to reduce the levels to several orders of magnitude below 300 kV/m.

Rigden, Gregory J.↗

Theory of high-field electronic transport in bulk ZnS and ZnSe

This paper theoretically investigates the nature of electronic transport and the high-energy tails of the electron distribution functions in bulk ZnSe and ZnS as a function of the applied electric field were investigated using calculations based on an ensemble Monte Carlo model. The calculations include the full details of the first two conduction bands as well as the full-order treatment of the electron-phonon scattering mechanisms. Results of high-field electronic transport calculations show that the electron energy distribution function is significanty cooler in ZnS than in ZnSe at comparable electric field strengths. The cooler distribution in ZnS is due to the much greater electron scattering rate. Consequently, it is more difficult to achieve carrier heating to comparable energies in ZnS than in ZnSe.

Brennan, Kevin↗

A non-Markovian model of avalanche gain statistics for a solid-state photomultiplier

A solid-state photomultiplier (SSPM) capable of continously detecting individual photons of wavelength between 0.4 and 28 microns has recently been disclosed (Petroff et al., 1987). The initial response of the SSPM to single photon is a fast, high-amplitude current pulse of between 10,000 and 100,000 electrons. A phenomenological model of the SSPM avalanche process is presented which successfully predicts the shape of the observed pulse-amplitude distribution by including small history-dependent effects on the carrier transport. The model clarifies the consequences of the electric field strength and the scattering of the electrons for the development of the avalanche in the SSPM.

Laviolette, Randall A.↗

Dissociation phenomena in electron-beam sustained carbon dioxide lasers

A number of applications are emerging requiring efficient, long pulse, long-life sealed CO2 lasers. Examples include the proposed NASA and ESA wind lidars. Electron-beam sustained discharge devices are strong contenders. Unlike self-sustained discharges, e-beam sustenance readily provides efficient performance from large volume discharges and offers pulse lengths well in excess of the microsecond or so generally associated with self-sustained devices. In the case of the e-beam sustained laser, since the plasma is externally maintained and operated at electric field strengths less than that associated with the glow to arc transition, the discharges can be run even in the presence of strongly attacking species such as O2. Build up of large levels of attacking contaminants is nevertheless undesirable as their presence reduces the current drawn by the plasma and thus the pumping rate to the upper laser level. The impedance rise leads to a mismatch of the pulse forming network with a consequent loss of control over energy deposition, operating E/N, and gain. Clearly CO2 dissociation rates, the influence of dissociation products on the discharge and gain, and tolerance of the discharge to these products need to be determined. This information can then be used to assess co-oxidation catalyst requirements for sealed operation.

Harris, Michael R.↗

Nature of convection-stabilized dc arcs in dual-flow nozzle geometry. I - The cold flow field and dc arc characteristics. II - Optical diagnostics and theory

Steady-state low-current air arcs in a dual-flow nozzle system are studied experimentally. The cold flow field with no arc is investigated using a 12.7-mm diameter dual-flow nozzle in a steady-flow facility. Mach number and mass flux distributions are determined for various nozzle-pressure ratios and nozzle-gap spacing. It is found that the shock waves in the converging-diverging nozzles result in a decrease in overal resistance by about 15 percent. Also, Schlieren and differential interferometry techniques are used to visualize the density gradients within the arc plasma and thermal mantle. Both optical techniques reveal a laminar arc structure for a reservoir pressure of 1 atm at various current levels. Experimentally determined axial static pressure and cold-flow mass flux rate distributions and a channel-flow model with constant arc temperatre are used to solve the energy integral for the arc radius as a function of axial distance. The arc electric field strength, voltage, resistance, and power are determined with Ohm's law and the total heat transfer is related to arc power.

Serbetci, Ilter↗

A study of the scintillation light induced in liquid xenon by electrons and alpha particles

The time dependence and the intensity of the primary scintillation light in liquid Xe excited by Am-241 alpha particles and Bi-207 internal-conversion electrons were measured at different electric-field strengths. High-purity liquid Xe was used to fill a parallel-plate ionization chamber equipped with a CaF2 window coupled to a UV-sensitive photomultiplier tube. The effect of the specific ionization density on the scintillation light and the time correlation between the light signal and the charge signal is reported. It is demonstrated that the fast scintillation signal produced in liquid Xe by an ionizing particle provides an ideal trigger in a detector aiming at a complete three-dimensional event reconstruction with an excellent background rejection capability.

Aprile, Elena↗

On the modulation of X ray fluxes in thunderstorms

The production of X-ray fluxes in thunderstorms has been attributed to bremsstrahlung. Assuming this, another question arises. How can a thunderstorm modulate the number density of electrons which are sufficiently energetic to produce X-rays? As a partial answer to this question, the effects of typical thunderstorm electric fields on a background population of energetic electrons, such as produced by cosmic ray secondaries and their decays or the decay of airborne radionuclides, are considered. The observed variation of X-ray flux is shown to be accounted for by a simple model involving typical electric field strengths. A necessary background electron number density is found from the model and is determined to be more than 2 orders of magnitude higher than that available from radon decay and a factor of 8 higher than that available from cosmic ray secondaries. The ionization enhancement due to energetic electrons and X-rays is discussed.

Mccarthy, Michael P.↗

A thermal/nonthermal model for solar microwave bursts

A theoretical framework is developed for modeling high-resolution spectra of microwave bursts from the Owens Valley Radio Observatory which can account for departures from expectations based on simple thermal or nonthermal models. Specifically, 80 percent of the events show more than one spectral peak; many bursts have a low-side spectral index steeper than the maximum expected slope; and the peak frequency stays relatively constant and changes intensity in concert with the secondary peaks throughout a given event's solution. It is shown that the observed spectral features can be explained through gyrosynchrotron radiation. The 'secondary' components seen on the LF side of many spectra are nonthermal enhancements superposed upon thermal radiation, occurring between the thermal harmonics. A steep optically thick slope is accounted for by the thermal absorption of nonthermal radiation. If the coexistence of thermal and nonthermal particles is interpreted in terms of electron heating and acceleration in current sheets, a changing electric field strength can account for the gross evolution of the microwave spectra.

Benka, Stephen G.↗

A hybrid thermal/nonthermal model for the energetic emissions from solar flares

We present an alternative interpretation of the high-resolution solar flare spectra obtained in 1981 by Lin et al. In our interpretation electron heating and acceleration are simultaneous and physically linked, rather than heating being a secondary effect of particle acceleration. We show that the observed properties of solar flare X-ray emission can in general be explained through the Joule heating and electric field acceleration of runaway electrons in current channels. We have fitted a hybrid thermal/nonthermal electron distribution, consisting of hot isothermal electrons with a nonthermal tail of runaway electrons, to representative spectra obtained by Lin et al. The hybrid model relaxes the electron number and energy flux requirements for the hard X-ray emission over those of a purely nonthermal model. The low-energy 'cutoff' to the nonthermal part of the X-ray spectrum is determined by the critical velocity in the electron distribution above which runaway acceleration occurs. We relate the fit parameters to the physical properties (such as the electric field strength in the current channels) of the acceleration region.

Holman, Gordon D.↗