Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The Dependence of Electron-only Magnetic Reconnection on Plasma Beta and Magnetic Shear: Theory and Observations

We investigate the onset conditions for electron-only magnetic reconnection through an analysis of 86 reconnection events observed by the Magnetospheric Multiscale mission in magnetosheath and magnetospheric current sheets. Our study presents the first observational evidence that the occurrence of electron-only reconnection depends on both the magnetic-field shear angle (θ) across the current sheet and the cross-sheet electron beta jump, quantified either by the inflow electron beta difference (Δβ e ) or by a modified electron beta jump (Δβ$^*_e$) defined by the cross-sheet electron pressure difference normalized by the average of the inflow magnetic pressure in the two inflow regions. We extend the diamagnetic-drift suppression mechanism from standard reconnection to electron-only reconnection by deriving relations applicable to electron-scale current sheets. Using scaling estimates, the electron-only reconnection suppression relation is derived as Δβ$^*_e$ ≳ 2(L/d e ) tan (θ/2), while a natural extension of the ion-coupled reconnection suppression criterion is Δβ e ≳ 2(L/d e ) tan (θ/2). At low Δβ e and Δβ$^*_e$ values, reconnection is detected across a large range of magnetic shear (from low to high), whereas high Δβ e and Δβ$^*_e$ conditions restrict reconnection to large shear configurations: shear angles as small as θ ≈ 5° occur when Δβ e (or Δβ$^*_e$) ≲0.1. However, only events exceeding θ ≳ 70° are found when Δβ e ≳ 1.0; this apparent restriction weakens when employing Δβ$^*_e$, as the corresponding data points shift toward smaller values of the modified electron beta jump. These findings quantitatively support theoretical predictions of reconnection suppression in high-β e plasmas at low shears, attributed to X-line drift induced by pressure gradients across electron-scale current sheets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Impact of solvation on the electronic resonances in uracil

Interactions of low-energy electrons with the DNA and RNA nucleobases are known to form metastable states, known as electronic resonances. In this work, we study electron attachment to solvated uracil, an RNA nucleobase, using the orbital stabilization method at the Equation of Motion-Coupled Cluster for Electron Affinities with Singles and Doubles (EOM-EA-CCSD) level of theory with the Effective Fragment Potential (EFP) solvation method. We benchmarked the approach using multireference methods, as well as by comparing EFP and full quantum calculations. The impact of solvation on the first one particle (1p) shape resonance, formed by electron attachment to the π* LUMO orbital, as well as the first two particle one hole (2p1h) resonance, formed by electron attachment to neutral uracil's π–π* excited state, was investigated. We used molecular dynamics simulations for solvent configurations and applied charge stabilization technique-based biased sampling to procure configurations adequate to cover the entire range of the electron attachment energy distribution. The electron attachment energy in solution is found to be distributed over a wide range of energies, between 4.6 eV to 6.8 eV for the 2p1h resonance, and between −0.1 eV to 2 eV for the 1p resonance. The solvent effects were similar for the two resonances, indicating that the exact electron density of the state is not as important as the solvent configurations. Multireference calculations extended the findings showing that solvation effects are similar for the lowest four resonances, further indicating that the specific solute electron density is not as important, but rather the water configurations play the most important role in solvation effects. Lastly, by comparing bulk solvation to clusters of uracil with a few water molecules around it, we find that the impact of microsolvation is very different from that of bulk solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electronic effects in radiation-induced collision cascades in nickel

The accurate treatment of electronic effects in multi-million-atom simulations of radiation-induced collision cascades is crucial for reliable predictions of primary radiation damage. In this work, we explore the fidelity of a recently developed two-temperature molecular dynamics model implementing an electron density-dependent coupling of electronic and atomic subsystems for cascade simulations in nickel. We show that the parameter-free model realistically captures the instantaneous energy losses during all stages of the highly nonequilibrium cascade process. Our simulations predict two distinct coupling regimes, corresponding to the rapid energy losses through electronic stopping in the early stages of the cascade and to the slow equilibration through the electron-phonon coupling mechanism in the later stages, without the use of separate models or coupling terms. The intermediate stage of the cascade dynamics displays a complex energy transfer between the subsystems, which cannot be interpreted by comparison to either electronic stopping or electron-phonon coupling theories. We therefore compare the predicted atomic mixing, which is sensitive to the energy losses during the intermediate cascade stage, with experimental ion beam mixing measurements. We find good agreement with the experiments, validating the coupling model for the intermediate stage of the cascade. Predictions of final defect numbers and cluster sizes are found in line with the results from conventional electronic stopping-based methods, while significantly reducing the theoretical uncertainty in the outcomes of conventional models stemming from arbitrary choices of thresholds for different coupling terms. Our results represent a notable improvement in cascade damage predictions in nickel, providing validation of the electron density-dependent coupling model for radiation damage simulations in general. The results lead us to propose an interpretation of the electronic energy losses in the intermediate regime of velocities, where we find an effectively nonlinear dissipation.

Crystal defects↗
DOE OSTI2025

The non-relativistic effective field theory of dark matter-electron interactions

Electronic excitations in atomic, molecular, and crystal targets are at the forefront of the ongoing search for light, sub-GeV dark matter (DM). In many light DM-electron interactions the energy and momentum deposited is much smaller than the electron mass, motivating a non-relativistic (NR) description of the electron. Thus, for any target, light DM-electron phenomenology relies on understanding the interactions between the DM and electron in the NR limit. In this work we derive the NR effective field theory (EFT) of general DM-electron interactions from a top-down perspective, starting from general high-energy DM-electron interaction Lagrangians. This provides an explicit connection between high-energy theories and their low-energy phenomenology in electron excitation based experiments. Furthermore, we derive Feynman rules for the DM-electron NR EFT, allowing observables to be computed diagrammatically, which can systematically explain the presence of in-medium screening effects in general DM models. We use these Feynman rules to compute absorption, scattering, and dark Thomson scattering rates for a wide variety of high-energy DM models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Anisotropic Heating and Parallel Heat Flux in Electron-only Magnetic Reconnection with Intense Guide Fields

Electron-only reconnection (E-REC) is a process recently observed in the Earth’s magnetosheath, where magnetic reconnection occurs at electron kinetic scales, and ions do not couple to the reconnection process. Electron-only reconnection is likely to have a significant impact on the energy conversion and dissipation of turbulence cascades at kinetic scales in some settings. This paper investigates E-REC under different intensities of strong guide fields (the ratio between the guide field and the in-plane asymptotic field strength is 5, 10 and 20, respectively) via two-dimensional fully kinetic particle-in-cell simulations, focusing on electron heating. The simulations are initialized with a force-free current sheet equilibrium under various intensities of strong guide fields. Similarly to previous experimental studies, electron temperature anisotropy along separatrices is observed, which is found to be mainly caused by the variations of parallel temperature. Both regions of anisotropy and parallel temperature increase/decrease along separatrices become thinner with increasing guide fields. Besides, we find a transition from a quadrupolar to a hexapolar (six-polar) to an octopolar (eight-polar) structure in temperature anisotropy and parallel temperature as the guide field intensifies. Non-Maxwellian electron velocity distribution functions (EVDFs) at different locations in the three simulations are observed. Our results show that parallel electron velocity varies notably with different guide field intensities and finite parallel electron heat flux density is observed. The three simulations exhibit features of the Chew–Goldberger–Low theory, with the level of consistency increasing as the guide field strength increases. This explains the electron parallel temperature variations and the shape of the EVDFs observed along the separatrices. This work may provide insights into the understanding of electron heating and parallel heat flux density in E-REC observed in the turbulent magnetosheath.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Electronic Configurational Transformation of Network Modifiers in Aluminate Glass above Megabar Pressures

Electronic responses of glasses under extreme pressures differ from those of crystalline analogs. Their distinct electronic environments are found in network formers with well-defined, covalent-bonded coordination environments (e.g., [4] Si and [4] Al) and in network modifiers with more disordered, ionic-bonded configurations (e.g., [5,6,7] Ca). Deciphering the evolution of the bonding environment of network modifier cations upon compression provides atomic insights into the pressure-driven hardening and transport properties of glasses. Despite the importance, in contrast to extensive efforts to uncover how network formers behave under pressure, considerable structural disorder around network modifiers makes it challenging to probe their electronic bonding environments under compression. Our understanding of the evolution of network modifiers above megabars is currently absent. Here, we report a discovery of highly densified electronic configurations of network modifier Ca in aluminate glass under extreme compression via the first inelastic X-ray scattering at the Ca L-edge up to 140 GPa. As evidenced by the prominent pressure-driven increases in electronic dispersion and delocalization, densified calcium environments are characterized by a decreased average Ca–O distance, the formation of highly coordinated calcium, a broader distribution of topological variables, and a greater distortion of Ca polyhedra above megabars. The spectral features for the Ca environments reveal significant electronic and bonding modifications, including pressure-driven increases in the ligand field interaction, the covalence characteristic of the Ca–O bond, and the electron–hole Coulomb interaction. These densification paths identify the electronic adaptation of network modifiers above megabars, shedding light on the origins of enhanced electron transport and the electron-storing capacity of glasses under pressure.

amorphous materials↗
DOE OSTI2025

Turn-On Conductivity with Proton-Coupled Electron Transport in Metal–Organic Frameworks

Proton-coupled electron transfer (PCET) has been studied for decades in the context of molecular reactivity, but its impact on long-range electron transport is barely understood. When defined broadly as ion-coupled charge transport (ICCT), relevant systems include lithium-ion battery electrodes, electrochromic coatings, and myriad electrocatalysts. Despite ample evidence that ion-electron coupling enhances or diminishes the performance of these devices, little is known about the experimental signatures of ICCT and the microscopic factors that govern its mechanism. Here, we expect that ion-electron coupling becomes especially relevant in high surface area materials, such as the layered electrodes of intercalation batteries, due to the close proximity of itinerant electrons and electrolyte. Here, we report an electrochemical investigation into a family of metal-organic frameworks (MOFs) that serves as a well-defined platform for understanding the effect of ICCT on both elec- tronic and ionic conductivity. Through photochemical doping of e - –H + pairs and introduction of solvent guest molecules, the Ti-containing MOFs convert from electronic-only insulators conductors (σ e ≈ 10 -12 S cm -1 ) to mixed ion-electron semiconduc- tors (σ e ≈ 10 -7 S cm -1 , σ ion ≈ 10 -5 S cm -1 ). Direct current and alternating current techniques support the existence of proton- electron coupling and, critically, that improved ionic conductivity enhances electronic conductivity. Taken together, these results provide direct evidence that PCET enables long-range charge transport and generalized electrochemical tools and synthetic methods for studying ion-electron coupling in materials broadly.

Charge transport↗
DOE OSTI2025

Low-energy electron driven reactions in 2-bromo-5-nitrothiazole

Thiazole derivatives are biologically relevant molecules, used also in pharmaceutical applications. Herein, we report results for electron attachment to 2-bromo-5-nitrothiazole (BNT) in the gas phase. Employing two crossed electron–molecule beam experiments, we determined the efficiency curves of various fragment anions as a function of the initial electron energy between about 0 and 10 eV as well as the emission angle and kinetic energy distributions of Br− and NO2− ions formed from a resonance near 4 eV. The experiments were supported by quantum chemical calculations, exploring possible dissociation pathways along with their reaction energies. We also compared the electron attachment characteristics of BNT with those of the native thiazole molecule by performing electron attachment experiments and calculations for this molecule as well. Compared to thiazole, which is primarily degraded only by electrons with kinetic energies between about 5 and 10 eV, BNT is susceptible to low-energy electrons near 0 eV with enhanced cross section for (dissociative) electron attachment. However, although BNT offers two localization sites with high electron affinity (Br and NO2 moieties), we do not find the corresponding anions as the dominant negatively charged species formed upon electron attachment. Instead, the reaction channels with an abstraction of Br and NO2 as neutral radicals prevail, accompanied by the opening of the thiazole ring due to the relatively weak C–S bond.

Chen, Jiakuan (ORCID:0009000729608641)↗
DOE OSTI2026

Radiation modeling and experimental validation of sub-cyclotron frequency microwave synchrotron radiation as a diagnostic tool for runaway electrons in present and future tokamaks

The microwave synchrotron radiation in the sub-cyclotron frequency region has been systematically validated as a diagnostic method for runaway electrons (>1 MeV) with radiation modeling and experiments on the DIII-D tokamak. Experimental observations reveal that sub-cyclotron frequency microwave radiation emerges only after runaway electrons are excited during plasma disruptions. Electron gyro-magnetic radiation modeling confirms that only runaway electrons with energies exceeding 1 MeV can emit radiation in the observed sub-cyclotron frequency band on DIII-D. The synchrotron Razin and Beaming effects are modeled in both the sub-cyclotron and standard Electron Cyclotron Emission (ECE) frequency region. Due to the pronounced beaming effect, the modeling supports that a standard ECE system is insensitive to synchrotron radiation from beamed runaway electrons (p ∥ >> p ⟂ ), but very sensitive to ECE radiation from isotropic suprathermal electrons (100 keV or less). DIII-D experiments further show that combining ECE and sub-cyclotron receivers reveals new insights into transient runaway dynamics during the plateau phase. Certain transient crash events appear only in the sub-cyclotron band or lead to opposite changes on the sub-cyclotron and standard ECE signals, supporting models where transient MHD events can exert a different effect on electrons of different energy levels. This novel diagnostic technique offers a powerful tool for studying and detecting runaway electron dynamics in both present-day and high-field future tokamaks. The diagnostic approach has been extrapolated to the SPARC tokamak, where sub-cyclotron radiation is predicted to respond sensitively and solely to runaway electrons during SPARC’s L-mode startup phase.

Yu, Guanying [Hefei Comprehensive National Science↗
DOE OSTI2024

Radiation by a laser-driven flying-focus electron wave packet

An exact solution of the Dirac equation in the presence of an arbitrary electromagnetic plane wave is found, which corresponds to a focused electron wave packet, with the focus of the wave packet moving at the speed of light in the opposite direction of the average momentum of the electron wave packet (unless the plane wave is so intense to reflect the electron). The photon spectrum emitted by such an electron wave packet in the presence of a linearly polarized plane wave is studied both analytically and numerically. The spectrum is also compared with the one emitted by a single-momentum, plane-wave electron in the case of the electron being initially counterpropagating (on average for the flying-focus case) with the plane wave and within the locally constant field approximation. It is found that if the electron flying-focus wave packet is focused beyond a Compton wavelength, the angular distribution of the emitted radiation along the magnetic field of the electromagnetic plane wave is broader than for an electron with definite momentum. Corresponding the maximum value of the photon yield on the transverse plane is smaller in the flying-focus electron case. This could represent an experimental signature of a laser-driven flying-focus electron wave packet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Insight Into the High-Potential Branch of the Alternate Nad+-Dependent NADPH:Ferredoxin Oxidoreductase II (NfnII) from Pyrococcus Furiosus. Evidence for the Gating Step in Electron Bifurcation

We have investigated the rapid-reaction kinetics of the NAD+-dependent NADPH:ferredoxin oxidoreductase II (NfnII) from Pyrococcus furiosus, permitting a comparison with recent work done with the paralog NfnI from the same organism. The half-potentials of the electron-bifurcating L-FAD are highly crossed in both NfnI, meaning the potential for the quinone/semiquinone couple is significantly lower than that for the semiquinone/hydroquinone couple so that the semiquinone oxidation state is thermodynamically unstable. The same appears to be the case with NfnII on the basis of its similar behavior in transient absorption spectroscopy experiments and the absence of any evidence for FAD*- accumulation in the course of reductive titrations (which would be manifested as a transient increase in absorbance at ~380 nm)1. Reductive titrations with both the one-electron donor sodium dithionite and the obligate two-electron donor NADPH demonstrate that, in contrast to NfnI, little FADH* accumulates in the high-potential pathway of NfnII in the course of reduction, as reflected in the absence of a transient increase in absorbance in the 500-600 nm region. This indicates that the half-potentials of the S-FAD are crossed in NfnII by a minimum of 120 mV. Rapid-reaction experiments mixing oxidized NfnII with NADPH also show no evidence of S-FADH* accumulation. Furthermore, the enzyme is only partially reduced at the end of the reaction with NADPH, indicating that there is little electron transfer into the high-potential pathway of NfnII. When the reaction is carried out in the presence of the one-electron carrier ferredoxin, only approximately one equivalent of ferredoxin becomes reduced, in contrast to the maximum of three equivalents seen with NfnI. This is consistent with only a single electron bifurcation event taking place under these conditions with NfnII, with only a single high-potential electron passing into the [2Fe-2S] cluster of the high-potential pathway of NfnII but not progressing further to the S-FAD. This accounts for the observation that NfnII has greatly reduced bifurcating activity compared to NfnI. The lack of electron transfer into the S-FAD of NfnII due to its crossed half-potentials prevents successive bifurcation activity and indicates that electron transfer within the high-potential branch gates bifurcation activity in NfnI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of a magnetic field on hot electron generation from laser-plasma instabilities

We performed two-dimensional simulations of turbulent laser-plasma instabilities in the presence and absence of external magnetic fields using the Laser Plasma Simulation Environment (LPSE) code. The results demonstrate that, in the presence of a magnetic field, the transition from ballistic to gyrating electron motion enhances the energy transfer from electron plasma waves to the electron population. Although stronger magnetic fields produce a larger population of hot electrons, these electrons tend to remain confined near the quarter-critical density, where the instabilities also localize, thereby reducing the potential for hot electron transport deeper into the target. Additionally, we present a scaling analysis that quantifies hot electron generation as a function of plasma electron temperature, density scale length, and applied magnetic field strength. These findings may have important applications for controlling hot electron flux and mitigating preheat in inertial confinement fusion targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Validation of electron backscattering in the MCNP6.3 code

A new electron backscattering validation suite has been developed for the MCNP® code. The calculations in this suite cover both condensed history and single-event transport methods, seven different elemental materials ranging from beryllium to uranium, and incident electron energies from 200 eV to 14.1 MeV. In general, the accuracy of the MCNP code for electron backscattering calculations is energy-dependent. For incident electron energies below 2 keV, the condensed history method is not applied while the single-event method shows poor agreement with experimental measurements due to poor accuracy of the underlying atomic data. For incident energies between 2 keV and 256 keV, the single-event method typically shows better agreement with experiments, while for incident energies above 256 keV the condensed history method gives better accuracy. Additionally, agreement with experimental data is generally worse for low- Z materials such as beryllium and carbon, which may reflect deficiencies in the data or physics underlying electron transport through light elements in the MCNP code. The new electron backscattering validation suite, along with the previously introduced electron stopping power and Lockwood energy deposition validation suites, provide MCNP users with a quantified understanding of the uncertainties in electron transport calculations. Future improvements to electron transport in the MCNP code are necessary for low energies (≤ 2 keV) and for low- Z materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Aromatic Amide Foldamers Show Conformation‐Dependent Electronic Properties

Electron transport in organic molecules and biomolecules is governed by electronic structure and molecular conformations. Despite recent progress, key challenges remain in understanding the role of intramolecular interactions and three-dimensional (3D) conformations on the electron transport behavior of organic molecules. In this work, the electronic properties of aromatic amide foldamers are characterized that organize into distinct 3D structures, including an extended secondary amide that adopts a trans-conformation and a folded N-methylated tertiary amide that adopts a cis-conformation. Results from single-molecule electronic experiments show that the extended secondary amide exhibits a fourfold enhancement in molecular conductance compared to the folded N-methylated tertiary amide, despite a longer contour length. The results show that extended amide molecules are governed by a through-bond electron transport mechanism, whereas folded amide molecules are dominated by through-space transport. Bulk spectroscopic characterization and density functional theory calculations further reveal that extended amides have a smaller HOMO–LUMO gap and larger transmission values compared to folded amides, consistent with single-molecule electronic experiments. Overall, this work shows that 3D molecular conformations significantly influence the electronic properties of single-molecule junctions.

electron transport↗
DOE OSTI2025

Evolution of the Electronic Gap of Directly Synthesized Versus Mechanically Transferred WS 2 Monolayer to Multilayer Films

The electronic properties of 2D materials play a critical role in determining their potential for device applications. Despite rapid developments in 2D semiconductors, studies of fundamental electronic parameters, including the electronic gap and ionization energy, are limited, with significant discrepancies in reported values. The study focuses on tungsten disulfide (WS₂) and investigates the electronic structure of films comprising an increasing number of layers deposited with two different methods: direct synthesis via metal–organic chemical vapor deposition (MOCVD) and additive mechanical transfer of exfoliated single layers. The films are characterized via Raman, UV–vis, and photoluminescence spectroscopies, as well as ultraviolet photoelectron and inverse photoemission spectroscopies (UPS/IPES). The electronic gap of WS₂ is found to decrease from 2.43 eV for the monolayer to 1.97 eV for the trilayer, indicating a bulk transition at the trilayer thickness. This reduction in the electronic gap is primarily due to the downward shift of the conduction band minimum relative to the valence band maximum. A comparative analysis with MOCVD-grown WS₂ reveals a slightly larger electronic gap for MOCVD-grown samples, attributed to differences in defect densities. The electronic levels evaluated through UPS/IPES highlight the significant influence of preparation methods on the electronic properties of WS₂.

2D materials↗
DOE OSTI2024

Momentum-Space Observation of Optically Excited Nonthermal Electrons in Graphene with Persistent Pseudospin Polarization

The unique optical properties of graphene, with broadband absorption and ultrafast response, make it a critical component of optoelectronic and spintronic devices. Using time-resolved momentum microscopy with high data rate and high dynamic range, we report momentum-space measurements of electrons promoted to the graphene conduction band with visible light and their subsequent relaxation. Here, we observe a pronounced nonthermal distribution of nascent photoexcited electrons with lattice pseudospin polarization in remarkable agreement with results of simple tight-binding theory. By varying the excitation fluence, we vary the relative importance of electron-electron vs electron-phonon scattering in the relaxation of the initial distribution. Increasing the excitation fluence results in increased noncollinear electron-electron scattering and reduced pseudospin polarization, although up-scattered electrons retain a degree of polarization. These detailed momentum-resolved electron dynamics in graphene demonstrate the capabilities of high-performance time-resolved momentum microscopy in the study of 2D materials and can inform the design of graphene devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Visualizing the impact of quenched disorder on 2D electron Wigner solids

Electron Wigner solids (WSs) provide an ideal system for understanding the competing effects of electron–electron and electron–disorder interactions, a central unsolved problem in condensed matter physics. Progress in this topic has been limited by a lack of single-defect-resolved experimental measurements as well as accurate theoretical tools to enable realistic experiment/theory comparison. Here, in this study, we overcome these limitations by combining atomically resolved scanning tunnelling microscopy (STM) with neural-quantum-state quantum Monte Carlo (NQS-QMC) simulation of disordered 2D electron WSs to discover new disorder-induced physical regimes of correlated electron behaviour. STM was used to image the electron density (n e )-dependent evolution of electron WSs in gate-tunable bilayer MoSe 2 (BL-MoSe 2 ) devices with varying long-range (n LR ) and short-range (n SR ) disorder densities. These images were compared with NQS-QMC simulations using realistic disorder maps extracted from experiment, thus allowing the roles of different disorder types to be disentangled. We identify two distinct physical regimes for disordered electron WSs that depend on n SR . For n SR ≲ n e , the WS behaviour is dominated by long-range disorder and features extensive mixed solid–liquid phases, a new type of local re-entrant melting/crystallization and prominent Friedel oscillations. By contrast, when n SR ≫ n e , these features are suppressed and a more robust amorphous WS phase emerges that persists to higher n e , highlighting the importance of short-range disorder in this regime. Our work establishes a powerful framework for studying disordered quantum solids through a combined experimental–theoretical approach.

Ge, Zhehao [University of California, Berkeley, CA↗
DOE OSTI2024

Do not forget the electrons: Extending moderately-sized nuclear networks for multidimensional hydrodynamic codes

Context.Nuclear networks are widely used coupled with hydrodynamical simulations of explosive scenarios to account for the change of nuclear species and energy generation rate due to nuclear reactions. In this way, there is a feedback mechanism between the hydrodynamical state and the nuclear processes. Unfortunately, the timescale of nuclear reactions is orders of magnitude smaller than the dynamical timescale that drives hydrodynamical simulations. Therefore, these nuclear networks are usually very small, reduced in most cases to a dozen elements, especially when simulations are carried out in more than one dimension. Aims.We present here an extended nuclear network, with 90 species, designed for being coupled with hydrodynamic simulations, which includes neutrons, protons, electrons, positrons, and the corresponding neutrino and anti-neutrino emission. This network is also coupled with temperature, making it extremely robust and, together with its size, unique of its kind. The inclusion of electron captures on free protons makes the network very appropriate for multidimensional studies of Type Ia supernova explosions, especially when the exploding object is a massive white dwarf. Methods.We perform several tests that are relevant to simulate explosive scenarios, such as Type Ia supernovae and core-collapse supernovae. We compare the results of the 90 nuclei network with a standardα-chain network with 14 elements to evaluate the differences in the energy generation rate. We also evaluate the relevance of including the electrons in the network in terms of generated yields and how it affects the pressure of a degenerate fluid such as that of white dwarfs. The results obtained with the 90-nuclei network have been verified with a much larger 2000-nuclei network built from REACLIB (WinNet), in terms of nuclear energy generation rate, pressure, and produced yields. Results.The results obtained with the proposed medium-sized network compare fairly well, to a few percent, with those computed withWinNetin scenarios reproducing the gross physical conditions of current Type Ia supernova explosion models. In those cases where the carbon and oxygen fuel ignites at high density, the high-temperature plateau typical of the nuclear statistical equilibrium regime is well defined and stable, allowing large integration time steps. We show that the inclusion of electron captures on free protons substantially improves the estimation of the electron fraction of the mixture. Therefore, the pressure is better determined than in networks where electron captures are excluded, which will ultimately lead to more reliable hydrodynamic models. Explosive combustion of helium at low density, occurring near the surface layer of a white dwarf, is also better described with the proposed network, which gives nuclear energy generation rates much closer toWinNetthan typical reduced alpha networks. Conclusions.A nuclear network withN= 90 species, including electrons, aimed at multidimensional calculations of supernova explosions is described and verified. The proposed network is suitable for the study of Type Ia supernova explosions because it provides better values of pressure and electron abundance than other existing networks with smaller or even a similar size but without including electron capture processes.

Astronomy & Astrophysics↗