Search NASA⌕ Search

SEARCH · Search NASA

Results for “ENERGY FLUXES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Baltimore Turfgrass Field Experiment Campaign Report

The Baltimore Turfgrass Field Experiment (BTFE) consisted of an observation eddy covariance flux station, measuring CO 2 , H 2 O, and turbulent energy fluxes between the turfgrass field and the atmosphere. The tower was sited before the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s arrival, but for the purposes of this report, we can say that the campaign lasted as long as the Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) campaign, 12 months, 12/2024 through 11/2025. As stated, the flux tower was part of the COURAGE campaign on the M1 site. We set out to measure turfgrass because it is a ubiquitous part of the urban environment—in fact, it is the dominant vegetation land cover type in Baltimore and most cities. It contributes small but significantly to greenhouse gas balances as well as the energy balance in the urban environment. We also installed a soil temperature and matric potential profiling system as part of this experiment. Additionally, AmeriFlux asked us to participate in their soil matric potential soil moisture mapping experiment. We collected 12 soil samples to be analyzed by a team in Bloomington, Indiana: results are pending.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Design, fabrication, and testing of a water-cooled tungsten-foam high-heat flux plasma-facing module

Here, we present a comprehensive study detailing the design, fabrication and testing a new modular “finger” component, featuring a hexagonal tungsten foam armor tile bonded to the top surface of the water-cooled finger unit. The mechanical, thermal, and particle transport properties of the tungsten foam armor were determined for a wide range of porosity and cell size, and then combined in an equivalent solid material with “effective” properties suitable for large-scale simulations. A series of 3-D multiphysics simulations for coupled thermal and mechanical behavior of the “finger” module are used to optimize the design before fabrication. The simulation results show that, for the expected experimental conditions, a safe range of heat flux and foam porosity is possible for both water-cooling and helium-cooling. Based on these multiphysics simulations, an optimum finger cooling module has been fabricated at Ultramet, Inc. A series of experiments were designed to study the thermomechanical performance of the “finger” unit under steady-state and transient thermal loading at surface heat flux up to 16 MW/m 2 in the High Energy Flux Test facility (HEFTY) at UCLA. Testing conditions included low-power, steady-state plasma exposure at 6 MW/m 2 , followed by severe high heat flux cycles at 16 MW/m 2 . Results of these tests are explained through comparisons with multiphysics simulations. To eliminate the effects of thermomechanical damage carried out on a module on its thermo-mechanical response on a subsequent test, three different yet identically designed and fabricated finger modules were tested. The results show that the current design is capable of cooling the walls of fusion devices at surface heat flux up to 6 MW/m 2 without failure, and that the failure heat flux limit is below 16 MW/m 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Improved Representations of Land‐Atmosphere Interactions Over the Continental U.S. Through Dynamic Root Modeling

Previous studies have identified the oversimplified root system representation as a key factor leading to inaccuracies in vegetation‐atmosphere feedbacks. In this study, a dynamic root water uptake scheme in the Noah‐MP land surface model has been coupled to the Weather Research and Forecasting (WRF) model to investigate its impact on the surface hydroclimate variables and land‐atmosphere interactions. To evaluate the impact of the dynamic root, two coupled simulations were conducted, one with the dynamic root water uptake scheme (DynRt) and one with the static root water uptake scheme (StcRt), which is based on the default root representation in Noah‐MP, with slight modifications, primarily in vegetation‐related parameters. Both DynRt and StcRt simulations were conducted with a small ensemble of three members to account for variations in physical parameterizations, initial and boundary forcing and model setup. When compared with reference data sets, the DynRt simulations show improved results than the StcRt simulations, reducing biases in the simulated leaf area index, surface energy fluxes, soil moisture and precipitation. Two different mechanisms through which roots affect land‐atmosphere coupling have been identified. Over the transitional climate zone between the dry and wet climate, the dynamic root scheme affects surface climate and land‐atmosphere coupling mainly through changes in soil moisture through hydraulic redistribution by plant root system. Over the energy‐limited mesic zone, the dynamic root affects regional land‐atmosphere coupling mainly through changes in carbon allocation. This work highlights the importance of dynamic root representation in improving vegetation‐atmosphere simulations by enhancing predictions of water, energy, and carbon fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

MPEX AI Digital Twins

All magnetically confined plasma fusion power plant concepts (Tokamak, Spherical Tokamak, Stellarator, Mirror, ...) must exhaust the heat and plasma from the core confinement region to the material walls. The primary channel for this exhaust is through a plasma divertor which directs plasma along open magnetic field lines to a material target. The Material Plasma Exposure eXperiment (MPEX) illustrated in Figure 1, is a high-power, steady-state linear plasma device designed to produce the plasma material interaction (PMI) conditions of the divertor of future magnetic confinement fusion power plants: energy flux 20MW/m 2 , ion fluence 1031/m 2 , pulse duration 106 sec. These goals of plasma exposure in MPEX are well beyond those achieved in magnetic fusion experimental devices. Successfully achieving these high power steady state conditions for long pulses requires operational control of the heating and particle sources and the plasma flux to the walls and target. The MPEX AI Hot Spot Controller, proposed in this project, will help achieve the operational milestones of MPEX. The MPEX device will begin commissioning at the end of FY26. A smaller proto-MPEX was operated for 14,666 plasma discharges and will resume operation in September of 2025 as proto-MPEX-lite, with reduced capability, to test a new window for the Helicon plasma source. The proto-MPEX data has undergone surrogate modeling with machine learning methods (R. Archibald, 2022 IEEE International Conference on Big Data). This proto-MPEX data will be used to begin development of the AI digital twins described in this white paper. The scientific mission of MPEX is to qualify materials of different composition for use in the high energy and plasma flux conditions of a fusion power plant. The materials exposed in MPEX will in some cases be exposed to high neutron fluxes at other ORNL facilities to measure the changes to their PMI properties. The targets exposed in MPEX will be transported under vacuum to a Surface Analysis Station (SAS). The SAS will be equipped with the following diagnostics: Focused Ion Beam (FIB) for trench milling, 100-400 angstrom resolution scanning electron microscope (SEM), surface mapping x-ray spectrometer, high resolution camera, and a future upgrade to a laser induced breakdown spectroscopy quadruple mass spectrometer (LIBS-QMS). The MPEX experiments will generate diverse pre- and post-exposure measurement data of detailed material properties down to the crystal grain level in 3D for post-exposure assessment of PMI damage (e.g. cracking, melting, erosion and redeposition of the material). Physics models for the PMI, and how the material composition and manufacturing impact its performance under high energy plasma exposure, need to be validated with MPEX data to guide the selection of new candidate materials. Our vision for the MPEX AI Digital Twins project is to supply experimental and physics model simulation data to train Artificial Intelligence (AI) models for data processing, analysis, operational control, PMI and materials simulation to maximize the scientific output of the MPEX device. Ultimately, an AI digital twin of MPEX material assessment metrics for tested and synthetic material types with simulated PMI will be trained by the AI Modeling Teams on the experimental and physics simulation data submitted to the American Science Cloud by this project. A purely empirical search for the best material is inefficient given the finite number of samples that can be tested on MPEX. In order to expand the material properties database for training the MPEX Material Assessment AI Digital Twin, and to gain physics understanding of the PMI processes, physics models of the material properties and PMI processes are required. The physics simulations provide detailed simulation data, like impact angles for plasma ions, sputtering yields, transport of the ionized sputtered target material in the plasma, and redeposition locations. This simulation data expands the measurement data for deeper physics understanding. The experimental data is essential to validate the PMI and material structure simulation models. The validated models can then be used to generate new simulation data of MPEX material assessments for synthetic material compositions that have not been exposed in MPEX. These predictive simulations, plus the whole experimental dataset, will be used to train the MPEX Material Assessment AI Digital Twin allowing a rapid generative AI search for new materials with reduced PMI damage by interpolating the domain of the training set. These new optimum materials can be simulated with the physics codes and/or tested in MPEX. The ability of AI neural networks to interpolate multi-dimensional parameter spaces and generate virtual data is exploited for a more efficient search for optimum materials. The advent of the Transformational AI Models Consortium (TAIMC) is an opportunity to engage with state of the art private and public AI developers to achieve the goals of the AI digital twins and AI accelerated physics models proposed in this project. Our partners at ORNL from the Advance Scientific Computing Research (ASCR) organization will collaborate in accelerating the integrated plasma material interaction simulation framework. This simulation framework will provide a platform for generating simulation data across a range of physical fidelities, including hybrid methods that produce multi-fidelity results. This data will be leveraged for AI model development, both for generation of surrogates and the automation of simulation campaigns. A part of the research below will include collaborative efforts with the TAIMC to (i) adapt data storage approaches to ensure AI-readiness, (ii) provide a protypical exemplar to inform and exercise constructed workflows, and (iii) generate and share data, using the TAIMC unified AI data standard, for foundational models that will be trained from multiple sources across the DOE complex. We will also collaborate with the TAIMC, as well as the planned AI modeling teams, to develop approaches for reducing the cost of data generation. These include tailored multi-fidelity approaches as well as fine-tuning strategies to augment general, large-scale foundational models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Distinctive Pattern of Global Warming in Ocean Heat Content

Abstract Huge heat anomalies in the atmosphere and ocean in recent years are not yet explained. Strong characteristic patterns in temperatures for upper layers of the ocean occurred from 2000 to 2023 in the presence of global warming from increasing atmospheric greenhouse gases. Here, we show that the deep tropics are warming, although sharply modulated by El Niño–Southern Oscillation events, with strong heating in the extratropics near 40°N and 40°–45°S but little heating near 20°N and 25°–30°S. The heating is most clearly manifested in zonal-mean ocean heat content and is evident in sea surface temperatures. The strongest heating is in the Southern Hemisphere, where aerosol effects are small. Estimates are made of the contributions to heating of top-of-atmosphere (TOA) radiation, atmospheric energy transports, surface fluxes of energy, and redistribution of energy by surface winds and ocean currents. The patterns of change are not directly related to TOA radiation but are evident in net surface energy fluxes and inferred ocean heat transports, underscoring their coupled origin. Changes in the atmospheric circulation through a poleward shift in ocean jet streams and storm tracks are reflected in surface wind-driven ocean Ekman transports. As well as human-induced climate change, internal natural variability is likely in play. Hence, the atmosphere and ocean currents are systematically redistributing heat from global warming, profoundly affecting local climates. Significance Statement As the climate changes, it has been difficult to discern meaningful patterns. Distinctive patterns of change have occurred in the ocean when examined as zonal averages around latitude bands. Most excess heat from global warming resides in the ocean and, since 2005, has become focused into bands near 40°N and 40°S, with little net warming in the subtropics. The strongest warming is in the Southern Hemisphere, although sea surface temperatures have increased more in the Northern Hemisphere. Changes in the atmospheric circulation through a poleward shift in the jet stream and storm tracks are primarily responsible along with corresponding changes in ocean currents. These changes are linked through surface exchanges of energy via heat, moisture, and wind stress.

Trenberth, Kevin E. [National Center for Atmospher↗
DOE OSTI2022

Electromagnetic energy transport by tearing fluctuations in a self-organized reversed-field pinch plasma

Fluctuation measurements reveal the outward electromagnetic energy flux needed to drive the dynamo electromotive force supporting magnetic self-organization in a reversed-field pinch plasma. The radial Poynting flux due to tearing mode fluctuations is measured with an insertable probe during magnetic relaxation. This flux corresponds to transient power levels much larger than the input power and comparable to the global equilibrium magnetic energy transient loss rate. The probe measurements of this flux are roughly as predicted by a simple Poynting's theorem model upon substitution of equilibrium measurement data.

Physics↗
DOE OSTI2024

Imprint of urbanization on snow precipitation over the continental USA

Urbanization can alter the local climate through modifications in land-atmosphere feedback. However, a continental scale evaluation of its influence on precipitation phase remains unknown. Here, we assess the difference in the likelihood of snow dominated events (SDEs) over 7,415 urban and surrounding non-urban (buffer) regions across the continental United States. Among 4,856 urban-buffer pairs that received at least five SDEs per year, 81% of urban regions are characterized by a smaller snow probability, 99% by a lower frequency of SDEs, and 57% by faster declining trends in SDEs compared to their buffer counterparts. Notably, urban (buffer) regions with lower snow probability are often characterized by higher net incoming and sensible energy fluxes as compared to buffer (urban) regions, thus highlighting the influence of land-energy feedback on precipitation phase. Results highlight a clear imprint of urbanization on precipitation phase and underscore the need to consider these influences while projecting hydro-meteorological risks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Do ambient shear and thermal stratification impact wind turbine tip-vortex breakdown?

Modern wind turbines experience uneven inflow conditions across the rotor, due to the ambient flow’s shear and thermal stratification. Such conditions alter the shape and length of turbine wakes and thus impact the loads and power generation of downstream turbines. To this end, understanding the spatial evolution of the individual wakes under different atmospheric conditions is key to controlling and optimising turbine arrays. With this numerical study we aim to obtain a better understanding of the fundamental physics governing the near-wake dynamics of wind turbines under shear and thermal stability, by examining their tip-vortex breakup mechanisms. Our approach considers scale-resolving simulations of a single turbine wake under a linear shear profile as well as the application of harmonic tip perturbations to trigger flow instabilities. For the subsequent analysis we use the proper orthogonal decomposition (POD) method to extract coherent structures from the flow, and we also calculate mean kinetic energy fluxes to quantify each coherent structure’s contribution to wake recovery. The wake’s helical spiral is found to hinder wake recovery for all studied ambient flow conditions, whereas the mutual inductance instability has positive MKE flux leading to an enhanced wake recovery. Finally, the ambient shear has the largest impact on the local MKE flux with respect to downstream location by changing the shape of the curve and location of extrema, whereas thermal stratification has only a minimal impact on the magnitude of the near-wake local MKE flux distribution.

17 WIND ENERGY↗
DOE OSTI2024

Energy Transport and Conversion Above a Bright Discrete Auroral Arc

Magnetically connected observations of particle distributions and luminosity from the Reimei spacecraft are used to examine energy transport and conversion occurring above a discrete auroral arc. By combining imaging and in situ measurements it is shown how transverse electromagnetic and kinetic energy fluxes measured along the spacecraft trajectory converge across geomagnetic field-lines into the acceleration region. It is shown how cross-field energy transport is facilitated by the formation of vortices along the length of the arc. From an integration over the vertical extent of the acceleration region it is shown that the transverse and field-aligned flow of energy into the arc locally supports the dissipation needed to power the electron acceleration observed. Estimates of gradients in electromagnetic and kinetic energy flows show how field-aligned electron energization in the acceleration region is supported by the divergence of Poynting flux along and across the background magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The Role of Non-Local Effects on Surface Sensible Heat Flux Under Different Types of Thermal Structures Over the Arctic Sea-Ice Surface

The effects of atmospheric thermal structure on the surface energy flux are poorly understood over the Arctic sea-ice surface. Here, we explore the mechanism of sensible heat exchange under different types of thermal structures over the Arctic sea-ice surface by using data collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition. The quadrant analysis indicates that strong surface temperature inversions below 100 m enhance non-local effects on the positive (upward) sensible heat flux ($\overline{w'θ'}$) through entrainment of large eddies from the convective boundary layer aloft. However, strong surface inversions restrict the contributions of large eddies to the negative (downward) $\overline{w'θ'}$ due to intensified surface stability. By inspecting the existing parameterization schemes, we found that the European Center for Medium-Range Weather Forecasts Integrated Forecasting System scheme fails to predict the impacts of non-local processes on the positive $\overline{w'θ'}$, and an adjustment term to correct the bias of parameterized $\overline{w'θ'}$ is proposed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Holistic Marine Energy Resource Assessments: A Wave and Offshore Wind Perspective of Metocean Conditions

Offshore wind and wave energy resources are possibly the last significantly untapped renewable energy resource, and could play a significant role in mitigating the worst impacts of climate change via the generation of renewable electricity. However, offshore wind and wave energy resource assessments have been conducted as independent parallel processes, with little interaction with regard to best practices, lessons learnt, or opportunities to create compatible methodologies for future utilization by the broader marine energy sector. Based on the latest technical specifications from the International Electrotechnical Commission, and the highest fidelity publicly available datasets, the offshore wind and wave conditions at the PacWave site off Oregon, USA were quantified. The results clearly show a significant untapped energy resource an annual average wave energy flux of ~35kW/m and a mean average wind speed of 7.8m/s. The offshore wind and wave energy resources both show significant seasonal variation, with offshore wind also featuring a consistent daily profile during summer. Finally, opportunities and challenges associated with developing a holistic assessment of offshore marine energy resources were discussed and recommendations provided.

Robertson, Bryson↗
DOE OSTI2025

Spatially varying seasonal modulation to tidal stream energy potential due to mixed tidal regimes in the Aleutian Islands, AK

We provide an assessment of the tidal stream energy resource of the Aleutian Islands, Alaska via a validated barotropic tidal numerical model of the region. Eight island passes are identified as energy “hotspots”. The annual mean kinetic energy fluxes, KEF , calculated at each pass vary from 1000 to 11,000 MW, while the annual available energy, AAE , varies from 5 to 42 MWh m −2 . Notable seasonal modulation to monthly power density averages and ranges are noted at some passes and not others. Seasonal adjustment is linked to the semi-annual solar declination cycle which enhances (dampens) diurnal (D 1 ) tidal amplitudes in summer/winter (spring/fall) as well as the time-varying phase lag between D 1 and semidiurnal (D 2 ) fortnightly tidal cycles. Annual variability in monthly mean power density scales with the tidal current form factor, F u , with the largest seasonal change occurring for F u > 1 (D 1 dominated tide). The spread in power density over a month is on average smaller for passes with mixed tides (F u = 1 ) than those with D 1 or D 2 dominance, as changes to fortnightly phase lag become influential to net power density ranges when tides are mixed. This study outlines overlooked, but relevant, long-term modulation to tidal streams in regions with mixed tides.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Modeling Assessment of Tidal Energy Extraction in the Western Passage

Numerical models have been widely used for the resource characterization and assessment of tidal instream energy. The accurate assessment of tidal stream energy resources at a feasibility or project-design scale requires detailed hydrodynamic model simulations or high-quality field measurements. This study applied a three-dimensional finite-volume community ocean model (FVCOM) to simulate the tidal hydrodynamics in the Passamaquoddy–Cobscook Bay archipelago, with a focus on the Western Passage, to assist tidal energy resource assessment. IEC Technical specifications were considered in the model configurations and simulations. The model was calibrated and validated with field measurements. Energy fluxes and power densities along selected cross sections were calculated to evaluate the feasibility of the tidal energy development at several hotspots that feature strong currents. When taking both the high current speed and water depth into account, the model results showed that the Western Passage has great potential for the deployment of tidal energy farms. The maximum extractable power in the Western Passage was estimated using the Garrett and Cummins method. Different criteria and methods recommended by the IEC for resource characterization were evaluated and discussed using a sensitivity analysis of energy extraction for a hypothetical tidal turbine farm in the Western Passage.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Distinguishability of Radially Directed Energy and Particle Flux in the TJ-II Heliac: Controlling Transport by Feedback-Phasing Experiments

This project supported a U.S. contribution to the TJ-II stellarator research program focused on distinguishing radially directed particle transport from energy transport in magnetized fusion plasmas. The motivating physics issue is that turbulent particle flux and turbulent heat or energy flux are not necessarily locked together: changes in density, electron temperature, plasma potential, and electric-field fluctuations can produce different phase relationships and therefore different radial fluxes. Resolving these relationships is important for understanding improved-confinement behavior, transport-barrier-like regimes, and the broader ability to predict and control confinement in stellarators and related toroidal devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A Unified Data Infrastructure for Biological and Environmental Research: A Report from the BER Advisory Committee

The Biological and Environmental Research (BER) program within the U.S. Department of Energy (DOE) Office of Science supports large-scale data generation efforts across its two divisions: Biological Systems Science and Earth and Environmental Systems Sciences. These efforts include user facilities in atmospheric radiation measurements, genomics, metabolomics, proteomics, compute, and imaging. In addition, BER supports the development of plant-based fuels; research in biosystems design, environmental microbiomes, and atmospheric systems; energy flux monitoring; climate-based ecosystem experiments; pathogen biopreparedness; and modeling of climate, urban interfaces, and interactions between people and energy resources. For data access, BER supports community data services at its user facilities, along with specialized data initiatives for Earth and environmental science, climate modeling, genomic and microbial analysis, and multisector dynamics modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Critical response to M. Worrall et al. Published in Annals of Nuclear Energy 207 (2024) 110731

M. Worrall et al. recently published a manuscript titled “Fast neutron irradiation capability in existing thermal test reactors” (Worrall, 2024) that summarizes an irradiation vehicle design that would boost the fast neutron flux in the Advanced Test Reactor (ATR) for testing of nonfuel materials in a neutron flux energy spectrum that is more representative of fast reactors. Here, the authors compare their design with a separate vehicle design that they conceived of that would be implemented within the High Flux Isotope Reactor (HFIR). They analyzed both designs and drew conclusions on the most realistic near-term options for shielded nonfuel material irradiations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Probing the Short-Distance Structure of the Quark-Gluon Plasma with Energy Correlators

Energy-energy correlators (EECs) are promising observables to study the dynamics of jet evolution in the quark-gluon plasma (QGP) through its imprint on angular scales in the energy flux of final-state particles. We carry out the first complete calculation of EECs using realistic simulations of high-energy heavy-ion collisions and dissect the different dynamics underlying the final distribution through analyses of jet propagation in a uniform medium. The EECs of γ -jets in heavy-ion collisions are found to be enhanced by the medium response from elastic scatterings instead of induced gluon radiation at large angles. In the meantime, EECs are suppressed at small angles due to energy loss and transverse momentum broadening of jet shower partons. These modifications are further shown to be sensitive to the angular scale of the in-medium interaction, as characterized by the Debye screening mass. Experimental verification and measurement of such modifications will shed light on this scale and the short-distance structure of the QGP in heavy-ion collisions. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Influence of Tundra Polygon Type and Climate Variability on CO 2 and CH 4 Fluxes Near Utqiagvik, Alaska

Arctic tundra has the potential to generate significant climate feedbacks, but spatial complexity makes it difficult to quantify the impacts of climate on ecosystem-atmosphere fluxes, particularly in polygonal tundra comprising wetter and drier polygon types on the scale of tens of meters. We measured CO 2 , CH 4 , and energy fluxes using eddy covariance for 7 yr (April to November, 2013–2019) in polygonal tundra near Utqiagvik, Alaska. This period saw the earliest snowmelt, latest snow accumulation, and hottest summer on record. To estimate fluxes by polygon type, we combined a polygon classification with a flux-footprint model. Methane fluxes were highest in the summer months but were also large during freeze-up and increased with the warming trend in August–November temperatures. While CO 2 respiration had a consistent, exponential relationship with temperature, net ecosystem exchange was more variable among years. CO 2 and CH 4 exchange (June–September) ranged between -0.83 (Standard error [SE] = 0.03) and -1.32 (SE = 0.04) μmol m -2 s-1 and 13.92 (SE = 0.26)—23.42 (SE = 0.45) nmol m -2 s -1 , respectively, and varied interannually (p ≤ 0.05). The maximum-influence method effectively attributed fluxes to polygon types. Areas dominated by low-centered polygons had higher CO 2 fluxes except in 2016–2017. Methane fluxes were highest in low-centered polygons 2013–2015 and in flat-centered polygons in subsequent years, possibly due to increasing temperature and precipitation. Sensible and latent heat fluxes also varied significantly among polygon types. Accurate characterization of Arctic fluxes and their climate dependencies requires spatial disaggregation and long term observations.

54 ENVIRONMENTAL SCIENCES↗