Search NASA⌕ Search

SEARCH · Search NASA

Results for “ENGINES, COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

DICE-gas turbine compound reheat combined cycle

Coal-fired Direct Injection Carbon Engine – Gas Turbine (DICE-GT) Compound-Reheat Combined Cycle (CRCC), is a combined cycle power plant comprising a multiplicity of coal-fired reciprocating internal combustion engines (RICE), which is commonly referred to by the acronym DICE (Direct Injection Carbon Engine); a natural gas-fired gas turbine (turbine and combustor); a heat recovery steam generator (HRSG); a steam turbine generator; and an integrally geared and intercooled centrifugal air compressor. Finally, the concept uses coal-water slurry/fluid in the DICE and natural gas (or hydrogen) in the gas turbine for unmatched efficiency (well above 50% net LHV) and modularity (block sizes of 120, 240 and 360 MW) with easy adaptability to carbon capture and sequestration with minimal additional cost, complexity and performance hit.

42 ENGINEERING↗
NASA NTRS1989

Antiproton powered propulsion with magnetically confined plasma engines

Matter-antimatter annihilation releases more energy per unit mass than any other method of energy production, making it an attractive energy source for spacecraft propulsion. In the magnetically confined plasma engine, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas. The resulting charged annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. The calculated energy transfer efficiencies for a low number density (10(14)/cu cm) hydrogen propellant are insufficient to warrant operating the engine in this mode. Efficiencies are improved using moderate propellant number densities (10(16)/cu cm), but the energy transferred to the plasma in a realistic magnetic mirror system is generally limited to less than 2 percent of the initial proton-antiproton annihilation energy. The energy transfer efficiencies are highest for high number density (10(18)/cu cm) propellants, but plasma temperatures are reduced by excessive radiation losses. Low to moderate thrust over a wide range of specific impulse can be generated with moderate propellant number densities, while higher thrust but lower specific impulse may be generated using high propellant number densities. Significant mass will be required to shield the superconducting magnet coils from the high energy gamma radiation emitted by neutral pion decay. The mass of such a radiation shield may dominate the total engine mass, and could severely diminish the performance of antiproton powered engines which utilize magnetic confinement. The problem is compounded in the antiproton powered plasma engine, where lower energy plasma bremsstrahlung radiation may cause shield surface ablation and degradation.

Lapointe, Michael R.↗
DOE OSTI2021

Revisiting the unique structure of autonomously replicating sequences in Yarrowia lipolytica and its role in pathway engineering

Production of industrially relevant compounds in microbial cell factories can employ either genomes or plasmids as an expression platform. Selection of plasmids as pathway carriers is advantageous for rapid demonstration but poses a challenge of stability. Yarrowia lipolytica has attracted great attention in the past decade for the biosynthesis of chemicals related to fatty acids at titers attractive to industry, and many genetic tools have been developed to explore its oleaginous potential. Here, our recent studies on the autonomously replicating sequences (ARSs) of nonconventional yeasts revealed that the ARSs from Y. lipolytica showcase a unique structure that includes a previously unannotated sequence (spacer) linking the origin of replication (ORI) and the centromeric (CEN) element and plays a critical role in modulating plasmid behavior. Maintaining a native 645-bp spacer yielded a 2.2-fold increase in gene expression and 1.7-fold higher plasmid stability compared to a more universally employed minimized ARS. Testing the modularity of the ARS sub-elements indicated that plasmid stability exhibits a pronounced cargo dependency. Instability caused both plasmid loss and intramolecular rearrangements. Altogether, our work clarifies the appropriate application of various ARSs for the scientific community and sheds light on a previously unexplored DNA element as a potential target for engineering Y. lipolytica.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A unified understanding of minimum lattice thermal conductivity

Here, we propose a first-principles model of minimum lattice thermal conductivity ($κ^{min}_L$) based on a unified theoretical treatment of thermal transport in crystals and glasses. We apply this model to thousands of inorganic compounds and find a universal behavior of $κ^{min}_L$ in crystals in the high-temperature limit: The isotropically averaged $κ^{min}_L$ is independent of structural complexity and bounded within a range from ~0.1 to ~2.6 W/(m K), in striking contrast to the conventional phonon gas model which predicts no lower bound. We unveil the underlying physics by showing that for a given parent compound, $κ^{min}_L$ is bounded from below by a value that is approximately insensitive to disorder, but the relative importance of different heat transport channels (phonon gas versus diffuson) depends strongly on the degree of disorder. Moreover, we propose that the diffuson-dominated $κ^{min}_L$ in complex and disordered compounds might be effectively approximated by the phonon gas model for an ordered compound by averaging out disorder and applying phonon unfolding. With these insights, we further bridge the knowledge gap between our model and the well-known Cahill–Watson–Pohl (CWP) model, rationalizing the successes and limitations of the CWP model in the absence of heat transfer mediated by diffusons. Finally, we construct graph network and random forest machine learning models to extend our predictions to all compounds within the Inorganic Crystal Structure Database (ICSD), which were validated against thermoelectric materials possessing experimentally measured ultralow κ L . Our work offers a unified understanding of $κ^{min}_L$, which can guide the rational engineering of materials to achieve .

42 ENGINEERING↗
DOE OSTI2022

Identification of Critical Material Attributes in Lignin Streams Based on Pseudomonas putida Performance

Variability in chemical composition of corn stover feedstocks has been suggested to play a role in biocatalyst performance during the conversion of lignocellulosic biomass to value-added compounds. In previous studies, we investigated the performance of Pseudomonas putida CJ781 - an engineered bacterium that converts aromatic compounds to muconate - on various lignin streams produced from the deacetylation of corn stover, and we found significant differences on muconate production. To better understand the origin of these differences, we down selected twenty-two compounds from literature - that had previously been detected as extractives in lignin streams - and we analyzed their concentrations in 12 lignin streams generated from different feedstocks. P. putida CJ781 was then cultivated in mock lignin streams supplemented with various concentrations of these compounds. Bacterial growth was tracked in microtiter plates and the performance was measured by comparing maximum growth rates among conditions. At maximum concentrations that may be found in lignin streams, sodium was the material attribute that limited growth rate in a greater extent, with a reduction in growth rate by 8 to 37%, depending on the counter ion, with sodium nitrate being the most inhibitory, followed by sodium acetate, sodium chloride, and sodium sulfate. Ammonium acetate was also found to be inhibitory at average concentrations of ammonium in lignin streams, reducing maximum growth rate by 18%. Overall, the data from this study has allowed to down select critical material attributes in lignin streams and process parameters that significantly affect the performance of P. putida and will be used as input to predictive models that aim to reduce risks attributed to feedstock variability in lignocellulosic biorefineries.

biocatalyst↗
NASA NTRS2013

Process Optimization of Bismaleimide (BMI) Resin Infused Carbon Fiber Composite

Engineers today are presented with the opportunity to design and build the next generation of space vehicles out of the lightest, strongest, and most durable materials available. Composites offer excellent structural characteristics and outstanding reliability in many forms that will be utilized in future aerospace applications including the Commercial Crew and Cargo Program and the Orion space capsule. NASA's Composites for Exploration (CoEx) project researches the various methods of manufacturing composite materials of different fiber characteristics while using proven infusion methods of different resin compositions. Development and testing on these different material combinations will provide engineers the opportunity to produce optimal material compounds for multidisciplinary applications. Through the CoEx project, engineers pursue the opportunity to research and develop repair patch procedures for damaged spacecraft. Working in conjunction with Raptor Resins Inc., NASA engineers are utilizing high flow liquid infusion molding practices to manufacture high-temperature composite parts comprised of intermediate modulus 7 (IM7) carbon fiber material. IM7 is a continuous, high-tensile strength composite with outstanding structural qualities such as high shear strength, tensile strength and modulus as well as excellent corrosion, creep, and fatigue resistance. IM7 carbon fiber, combined with existing thermoset and thermoplastic resin systems, can provide improvements in material strength reinforcement and deformation-resistant properties for high-temperature applications. Void analysis of the different layups of the IM7 material discovered the largest total void composition within the [ +45 , 90 , 90 , -45 ] composite panel. Tensile and compressional testing proved the highest mechanical strength was found in the [0 4] layup. This paper further investigates the infusion procedure of a low-cost/high-performance BMI resin into an IM7 carbon fiber material and the optical, chemical, and mechanical analyses performed.

Ehrlich, Joshua W.↗
NASA NTRS1980

AiResearch QCGAT engine, airplane, and nacelle design features

The quiet, clean, general aviation turbofan engine and nacelle system was designed and tested. The engine utilized the core of the AiResearch model TFE731-3 engine and incorporated several unique noise- and emissions-reduction features. Components that were successfully adapted to this core include the fan, gearbox, combustor, low-pressure turbine, and associated structure. A highly versatile workhorse nacelle incorporating interchangeable acoustic and hardwall duct liners, showed that large-engine attenuation technology could be applied to small propulsion engines. The application of the mixer compound nozzle demonstrated both performance and noise advantages on the engine. Major performance, emissions, and noise goals were demonstrated.

Heldenbrand, R. W.↗
DOE OSTI2026

Influence of cellular redox reactions on the structure and function of light harvesting and photosystems

Photosynthesis enables the conversion of one of the most abundant and free forms of energy, sunlight, into chemical bonds through the utilization of highly tailored protein complexes. These enzymes work in unison to absorb, convert, and transform light into high-energy electrons which are used for various functions important to metabolism and cellular protection. Over the last ∼50 years, photosynthetic organisms, such as cyanobacteria, have been adapted and engineered to produce valuable compounds like hydrogen and ethylene, among others. Often this is performed by removing native and/or adding in exogenous energy utilization pathways so that light energy is re-directed towards the synthesis of desired compounds. However, the interplay between primary light capture, conversion reactions, and the downstream electron utilization sinks is not fully understood. Further complicating these strategies are the plethora of compensatory mechanisms that facilitate steady electron flow and the maintenance of photosynthesis under dynamic conditions. This manifests as structural and functional plasticity of the photosynthetic machinery, often seen in modulations of oligomeric compositions or changes in protein-protein interactions and coupling with redox enzymes. Understanding these mechanisms is crucial to biotechnology applications because re-engineering electron utilization sinks has profoundly different effects on the light capture and conversion reactions of photosynthesis. Optimization requires a molecular-level understanding of the functional interrelationships between electron sinks and photosynthetic components that influence photosynthetic efficiencies to realize potential improvements in product yields. Here, we aim to highlight how perturbation of reductive reactions is revealing the functional plasticity in key components of the photosynthetic energy transduction pathway.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

MassIVE MSV000085948 - Utilization of syringyl lignin-derived compounds and production of 2-pyrone-4,6-dicarboxylic acid by Pseudomonas putida KT2440: Lignin is an abundant aromatic polymer formed in plants by coupling reactions of p-coumaryl, coniferyl, and sinapyl alcohols. Pseudomonas putida KT2440 (P. putida KT2440), a robust soil bacterium, naturally catabolizes many aromatic compounds derived from lignin as carbon and energy sources and has been extensively engineered to valorize guaiacyl (G) and p-hydroxyphenyl (H) lignin-derived aromatic species to valuable chemicals. However, only a few studies report the capacity of Pseudomonads to grow on syringyl (S) lignin-derived compounds. In this work, we demonstrate that P. putida KT2440 catabolizes syringate in the presence of an auxiliary energy source. Overexpression of vanAB, encoding a native Rieske non-heme iron monooxygenase, enabled catabolism of syringate and syringaldehyde without an additional carbon and energy source. In vitro biochemical characterization of VanAB confirmed that this enzyme O-demethylates syringate to 3-O-methylgallate and, subsequently, 3-O-methylgallate to gallate, albeit 4- and 55-fold less efficiently than vanillate, respectively. Transcriptomics and proteomics experiments demonstrate that the galADBC transcripts and enzymes required for gallate catabolism are induced when vanAB is overexpressed during cultivation in syringate. Further, we show that that the endogenous protocatechuate-3,4-dioxygenase PcaHG ring-opens gallate to produce 2-pyrone-4,6-dicarboxylic acid (PDC), a promising bio-based chemical. Constitutive overexpression of vanAB and pcaHG along with galA deletion enabled PDC production from SA at a 70% (mol/mol) yield. Furthermore, leveraging the LigAB dioxygenase from Sphingobium sp. SYK-6 and VanAB O-demethylase from Pseudomonas sp. HR199 enabled simultaneous conversion of monomers with S-, G-, and H-type functionality to PDC at 82% (mol/mol) yield. Overall, this study elucidates a native pathway for catabolism of syringyl lignin-derived compounds in P. putida KT2440 and demonstrates the potential of this robust host for biological funneling of substrates derived from all three canonical monolignols.

Explore the source record for details and available documents.

Beckham, Gregg↗
DOE OSTI2022

An Architectural Survey of the REECo Maintenance Compound, Area 6, Nevada National Security Site, Nye County, Nevada

The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) plans to install a 26.45-mile-long 138-kilovolt (kV) transmission line on the Nevada National Security Site (NNSS) in Nye County, Nevada. This new transmission line will upgrade the electrical transmission system and provide reliable power between Mercury Switching Station in Area 23 and the U1a Facility in Area 1. The proposed upgrade to the power transmission system constitutes an undertaking subject to review under Section 106 of the National Historic Preservation Act (NHPA) (54 United States Code [USC] § 306101) and its implementing regulations, 36 Code of Federal Regulations (CFR) Part 800. A portion of this new transmission line will cross the western perimeter of the Reynolds Electrical and Engineering Company (REECo) Maintenance Compound located in Area 6 of the NNSS. This compound with its trade shops, storage sheds, and yards served as a general construction facility that supported nuclear testing activities on the NNSS from 1967 to 1992. Although three architectural resources in the compound have previously been recorded and evaluated for the National Register of Historic Places (NRHP), other resources within it have not, nor has the compound been recorded and evaluated as a potential district. The State Historic Preservation Officer (SHPO) concurred with NNSA/NFO’s determination that the unevaluated REECo Maintenance Compound will be adversely affected by the proposed undertaking (Reed 2021). The NNSA/NFO, in consultation with the SHPO, then developed the Memorandum of Agreement DE-GM58-22NA25553 between the U.S. Department of Energy and the Nevada State Historic Preservation Officer Regarding Installation of a 138-kilovolt Transmission Line from the Mercury Switching Station to the U1a Facility and the Removal of the Historic 138-kilovolt Transmission Line from the Mercury Switching Station to the U1a Facility in Areas 1, 3, 5, 6, and 23 of the Nevada National Security Site, Nye County, hereafter referred to as the MOA. This architectural survey report was prepared in accordance with MOA Stipulation III.B. It describes the origins, history, layout, and functions of the REECo Maintenance Compound during the Cold War and identifies contributing and noncontributing resources. The report defines a district boundary based on archival research and the field survey and concludes with an appendix that presents digital color images of the compound with descriptions and a map key showing image viewpoints and directions. Although none of the architectural resources are recommended individually eligible, the district evaluation concludes the REECo Maintenance Compound is eligible as a historic district for listing in the NRHP under the Secretary of the Interior’s Significance Criteria A and C at the local level. The historic district retains all seven aspects of integrity and conveys its significance under the abovementioned criteria.

138 kV↗
DOE OSTI2022

Engineering magnetic topological insulators in Eu 5 M 2 X 6 Zintl compounds

Magnetic topological insulators provide a prominent material platform for quantum anomalous Hall physics and axion electrodynamics. However, the lack of material realizations with cleanly gapped surfaces hinders technological utilization of these exotic quantum phenomena. Here, using the Zintl concept and the properties of nonsymmorphic space groups, we computationally engineer magnetic topological insulators. Specifically, we explore Eu 5 M 2 X 6 (M=metal, X=pnictide) Zintl compounds and find that Eu 5 Ga 2 Sb 6 , Eu 5 Tl 2 Sb 6 , and Eu 5 In 2 Bi 6 form stable structures with nontrivial Z 2 indices. We also show that epitaxial and uniaxial strain can be used to control the Z 2 index and the bulk energy gap. Lastly, we discuss experimental progress towards the synthesis of the proposed candidates and provide insights that can be used in the search for robust magnetic topological insulators in Zintl compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Heterodoxy in Fast Pyrolysis of Biomass

As the field of fast pyrolysis has matured, it has been accompanied by a kind of orthodoxy in its practice. Among these orthodoxies are the following: (1) oxygen should be excluded from the pyrolysis process; (2) little sugar is produced during pyrolysis; and (3) the major product of pyrolysis is a low-value emulsion in water. Adherence to these tenets is an impediment to the commercial development of fast pyrolysis. Over the past 15 years, research at Iowa State University’s Bioeconomy Institute has challenged these tenets with what might be called heterodoxy in the science and engineering of fast pyrolysis: adding oxygen producing sugars, and fractionating bio-oil into valorized products. This paper reviews these new approaches to pyrolysis and concludes with an outlook for further developing them.

42 ENGINEERING↗
DOE OSTI2022

Conversion of Phenolic Oil from Biomass Pyrolysis into Phenyl Esters

Bio-oil is among the most economical approaches for advanced biofuel production. However, bio-oil faces several challenges including high acidity and viscosity, poor storage, and thermal stability. This study focuses on the upgradation of lignocellulosic (corn stover and yellow pine) bio-oil derived phenolic oil (PO), produced by the autothermal fast pyrolysis, through acid-catalyzed esterification reaction. Our strategy exploits a little recognized chemistry: the Fischer esterification of PO and carboxylic acids into carboxylic acid phenyl esters (CAPE) using Dean Stark distillation. Analyses by the Folin–Ciocalteu method, Karl Fischer titration, gas chromatography flame ionization detector, and the molecular weight determination by gel permeation chromatography suggest the conversion of 50 wt% added phenolics to their corresponding CAPE. The Fourier transform infrared spectroscopy analysis confirmed the formation of new C=O and two C–O stretching bands and decrease in the intensity of phenolic-OH bands in the CAPE. The 13 C NMR analysis supports the formation of CAPE together with some unreacted precursors. A base-catalyzed ester hydrolysis experiment and mass balance calculation show an excellent agreement (within 5% range) of the equivalent weight between the produced ester and the phenyl hexanoate. Brookfield analysis indicates that CAPE has 330-fold lower viscosity than starting PO. Heating values of CAPE were higher than PO, from which they were derived (42.2 and 43.6%, respectively, for PO from pyrolysis of corn stover and yellow pine), while moisture content decreased by 98.3 and 98.7%, respectively. The CAPE, which is a phenolic analogue of methyl esters used in biodiesel, has improved stability compared to PO from which it was derived.

42 ENGINEERING↗
DOE OSTI2021

Internal Microstructure Dictates Interactions of Polymer-grafted Nanoparticles in Solution

Understanding the effects of polymer brush architecture on particle interactions in solution is requisite to enable the development of functional materials based on self-assembled polymer-grafted nanoparticles (GNPs). Static and dynamic light scattering of polystyrene-grafted silica particle solutions in toluene reveals that the pair interaction potential, inferred from the second virial coefficient, A 2 , is strongly affected by the grafting density, σ, and degree of polymerization, N, of tethered chains. In the limit of intermediate σ (~0.3 to 0.6 nm -2 ) and high N, A 2 is positive and increases with N. This confirms the good solvent conditions and can be qualitatively rationalized on the basis of a pair interaction potential derived for grafted (brush) particles. In contrast, for high σ > 0.6 nm -2 and low N, A 2 displays an unexpected reversal to negative values, thus indicating poor solvent conditions. These findings are rationalized by means of a simple analysis based on a coarse-grained brush potential, which balances the attractive core-core interactions and the excluded volume interactions imparted by the polymer grafts. The results suggest that the steric crowding of polymer ligands in dense GNP systems may fundamentally alter the interactions between brush particles in solution and highlight the crucial role of architecture (internal microstructure) on the behavior of hybrid materials. The effect of grafting density also illustrates the opportunity to tailor the physical properties of hybrid materials by altering geometry (or architecture) rather than a variation of the chemical composition.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Blade dynamics analysis using NASTRAN

The complexities of turbine engine blade vibration are compounded by blade geometry, temperature gradients, and rotational speeds. Experience indicates that dynamics analysis using the finite element approach provides an effective means for predicting vibration characteristics of compressor and turbine blades whose geometry may be irregular, have curved boundaries, and be subjected to high temperatures and speeds. The NASTRAN program was chosen to help analyze the dynamics of normal modes, rotational stiffening and thermal effects on the normal modes, and forced responses. The program has produced reasonable success. This paper presents the analytical procedures and the NASTRAN results, in comparison with a conventional beam element program and laboratory data.

Kuo, P. S.↗
DOE OSTI2021

Pathway discovery and engineering for cleavage of a β-1 lignin-derived biaryl compound

Lignin biosynthesis typically results in a polymer with several inter-monomer bond linkages, and the heterogeneity of linkages presents a challenge for depolymerization processes. While several enzyme classes have been shown to cleave common dimer linkages in lignin, the pathway of bacterial β-1 spirodienone linkage cleavage has not been elucidated. In this study, we identified a pathway for cleavage of 1,2-diguaiacylpropane-1,3-diol (DGPD), a β-1 linked biaryl representative of a ring-opened spirodienone linkage, in Novosphingobium aromaticivorans DSM12444. In vitro assays using cell lysates demonstrated that RS14230 (LsdE) converts DGPD to a lignostilbene intermediate, which the carotenoid oxygenase, LsdA, then converts to vanillin. A Pseudomonas putida KT2440 strain engineered with lsdEA expression catabolizes erythro-DGPD, but not threo-DGPD. We further engineered P. putida to convert DGPD to a product, cis,cis-muconic acid. Overall, this work demonstrates the potential to identify new enzymatic reactions in N. aromaticivorans and expands the biological funnel of P. putida for microbial lignin valorization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Predicting the Cetane Number, Sooting Tendency, and Energy Density of Terpene Fuel Additives

Abstract Discovering renewable fuels and fuel additives is paramount in reducing carbon emissions from internal combustion engines. Terpenes, a group of compounds that can be synthesized from plant matter and microorganisms, have gained significant interest in recent years as promising candidates for fuels/additives. Terpenes are a diverse class of compounds that contain rings and methyl branches, resulting in high energy densities and optimal cold weather behavior. Their variation in bond order, carbon chains, and functional groups lead to varying degrees of soot formation and performance in existing engines. The present work leverages predictive models, namely artificial neural networks, to predict the cetane number (CN), sooting tendency (quantified with yield sooting index, YSI), and energy density (quantified with lower heating value, LHV) of terpenes and hydrogenated terpenes whose sooting propensities were previously determined through experimental means. Predicted sooting propensities of these terpenes are compared with experimental values, and predicted cetane numbers and energy densities are used to comment on the compounds’ ability to act as fuels/additives. Expected prediction errors for CN, YSI, and LHV, defined by blind test set median absolute error, are within 5.56 cetane units, 3.63 yield sooting index units, and 0.77 MJ/kg respectively. Additionally, the present work investigates a variety of correlation/dependence metrics for property-property relationships, furthering our understanding of how combustion-relevant properties are related.

09 BIOMASS FUELS↗
DOE OSTI2023

Methods of producing lipid-derived compounds and host cells thereof

The present disclosure relates to genetically engineered host cells and methods of producing a lipid-derived compound by employing such host cells. In particular embodiments, the host cell includes a first mutant gene encoding a cytoplasmic tRNA thiolation protein. Optionally, the host cell can include other mutant genes for decreasing fatty alcohol catabolism, decreasing re-importation of secreted fatty alcohol, or displaying other useful characteristics, as described herein.

Coradetti, Samuel↗