Search NASA⌕ Search

SEARCH · Search NASA

Results for “EQUATIONS - DRAG, PROFILE - BICKNELL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Electrostatic shocks in the auroral magnetosphere

A 1d unmagnetized double layer simulation is presented along with analytic considerations of the Langmuir-Bohm criterion for double layer formation. It is found that this requirement of large electron drift is not reduced by trapped thermal electron and ion populations; the assumption of a nonthermal population which requires the preexistence of the double layer cannot reduce the required electron drift. It is noted that negative charge density spikes and holes in ion phase space accompany the double layer. A magnetized BGK mode solution to Poisson's equation for the potential profile perpendicular to B for cold counter-streaming electrons and ions shows how the spatial structure changes in a magnetized plasma.

Hudson, M. K.↗

A convective model for turbulent mixing in rotating convection zones

The effects of rotation are included in an analytical model for the convective motions in a plane-parallel layer of an ideal fluid. The turbulent stress tensor, formed by taking products and averages of the various velocity components, is calculated for an arbitrary eddy size and shape. Heuristic formulae presented for determining the size and shape of the dominant eddy then give a fully specified stress tensor. Applications for this stress tensor in problems of stellar internal dynamics, heat flow, scalar diffusion, and dynamo theory are suggested. The resultant stresses tend to produce differential rotation profiles with rapidly rotating equators and interiors. The dynamo activity associated with these convective motions tends to occur near the lower boundary of the convection zone.

Hathaway, D. H.↗

Estimation of soil hydraulic properties with microwave techniques

Useful quantitative information about soil properties may be obtained by calibrating energy and moisture balance models with remotely sensed data. A soil physics model solves heat and moisture flux equations in the soil profile and is driven by the surface energy balance. Model generated surface temperature and soil moisture and temperature profiles are then used in a microwave emission model to predict the soil brightness temperature. The model hydraulic parameters are varied until the predicted temperatures agree with the remotely sensed values. This method is used to estimate values for saturated hydraulic conductivity, saturated matrix potential, and a soil texture parameter. The conductivity agreed well with a value measured with an infiltration ring and the other parameters agreed with values in the literature.

Oneill, P. E.↗

Chemical zoning and homogenization of olivines in ordinary chondrites and implications for thermal histories of chondrules

The extent and degree of homogenization of chemical zoning of olivines in type 3 ordinary chondrites is studied in order to obtain some constraints on cooling histories of chondrites. Based on Mg-Fe and CaO zoning, olivines in type 3 chondrites are classified into four types. A single chondrule usually contains olivines with the same type of zoning. Microporphyritic olivines show all four zoning types. Barred olivines usually show almost homogenized chemical zoning. The cooling rates or burial depths needed to homogenize the chemical zoning are calculated by solving the diffusion equation, using the zoning profiles as an initial condition. Mg-Fe zoning of olivine may be altered during initial cooling, whereas CaO zoning is hardly changed. Barred olivines may be homogenized during initial cooling because their size is relatively small. To simulated microporphyritic olivine chondrules, cooling from just below the liquidus at moderately high rates is preferable to cooling from above the liquidus at low rates. For postaccumulation metamorphism of type 3 chondrites to keep Mg-Fe zoning unaltered, the maximum metamorphic temperature must be less than about 400 C if cooling rates based on Fe-Ni data are assumed. Calculated cooling rates for both Fa and CaO homogenization are consistent with those by Fe-Ni data for type 4 chondrites. A hot ejecta blanket several tens of meters thick on the surface of a parent body is sufficient to homogenize Mg-Fe zoning if the temperature of the blanket is 600-700 C. Burial depths for petrologic types of ordinary chondrites in a parent body heated by Al-26 are broadly consistent with those previously proposed.

Miyamoto, Masamichi↗

A computer model for the recombination zone of a microwave-plasma electrothermal rocket

As part of a study of the microwave-plasma electrothermal rocket, a computer model of the flow regime below the plasma has been developed. A second-order model, including axial dispersion of energy and material and boundary conditions at infinite length, was developed to partially reproduce the absence of mass-flow rate dependence that was seen in experimental temperature profiles. To solve the equations of the model, a search technique was developed to find the initial derivatives. On integrating with a trial set of initial derivatives, the values and their derivatives were checked to judge whether the values were likely to attain values outside the practical regime, and hence, the boundary conditions at infinity were likely to be violated. Results are presented and directions for further development are suggested.

Filpus, John W.↗

The equilibrium dayside magnetosphere

A method is presented of computing the dayside global earth magnetic field which is in equilibrium with the plasma pressure, based on satellite observations at a local region of the magnetosphere. The method, which utilizes a perturbation around a dipole magnetic field, involves computation of the global plasma pressure profile based on the equatorial (anisotropic) pressure data, derivation of the current profile which satisfies the equilibrium condition, and computation of the magnetic field using the current profile and the boundary current produced by the solar wind. The method is applied for the Active Magnetospheric Particle Tracer Explorers data, and the result of the computation is found to compare reasonably well with the observed magnetic field profile near the geomagnetic equator.

Zavriyev, Anton↗

An approximate method for calculating three-dimensional inviscid hypersonic flow fields

An approximate solution technique was developed for 3-D inviscid, hypersonic flows. The method employs Maslen's explicit pressure equation in addition to the assumption of approximate stream surfaces in the shock layer. This approximation represents a simplification to Maslen's asymmetric method. The present method presents a tractable procedure for computing the inviscid flow over 3-D surfaces at angle of attack. The solution procedure involves iteratively changing the shock shape in the subsonic-transonic region until the correct body shape is obtained. Beyond this region, the shock surface is determined using a marching procedure. Results are presented for a spherically blunted cone, paraboloid, and elliptic cone at angle of attack. The calculated surface pressures are compared with experimental data and finite difference solutions of the Euler equations. Shock shapes and profiles of pressure are also examined. Comparisons indicate the method adequately predicts shock layer properties on blunt bodies in hypersonic flow. The speed of the calculations makes the procedure attractive for engineering design applications.

Riley, Christopher J.↗

Physics of heavy ions (1989-1990)

The results from studies on polar wind ion heating due to kinetic ion beam instabilities and the effects of such ion heating on the outflow of O(+) in the polar wind are presented and discussed. First, the linear instabilities associated with an O(+) and H(+) polar wind plasma in the presence of O(+) and H(+) beams for a range of O(+)/H(+) beam densities, T(sub e)/T(sub i), and ion beam speeds were examined. Then, nonlinear heating of the polar wind ions was studied, using numerical simulations. The O(+) and H(+) polar wind ions were modeled by isotropic Maxwellian distributions, and the electrons, O(+) beams, and H(+) beams were modeled by drifting Maxwellian distributions. The effects of the kinetic ion heating on the outflow of the polar wind ions were examined from the ionosphere, using a time-dependent hydrodynamic model. A numerical code to solve the O(+) and H(+) continuity and momentum equations in a flux tube from ionospheric to magnetospheric altitudes were developed. The effects of ion heating were included by allowing for the altitudinal variation of the ion temperatures in the momentum equation. The ion temperature profiles were specified based on the ion heating characteristics found from previous kinetic simulations. It was assumed that heating occurred above 1500 km and increased to a saturated value of temperature that was obtained directly from the kinetic simulation study. The characteristics of the dynamical polar wind without ion heating were studied, and a flux tube on closed field lines that suddenly became open at t = 0 was simulated. Then, the effects of ion heating were included. To gain some physical insight, two limiting cases were considered: preferential H(+) heating and preferential O(+) heating. How O(+) heating can lead to enhanced polar wind O(+) fluxes in the polar magnetosphere is shown.

Ashour-Abdalla, M.↗

The stability to two-dimensional wakes and shear layers at high Mach numbers

This study is concerned with the stability properties of laminar free-shear-layer flows, and in particular symmetric two-dimensional wakes, for the supersonic through the hypersonic regimes. Emphasis is given to the use of proper wake profiles that satisfy the equations of motion at high Reynolds numbers. In particular the inviscid stability of a developing two-dimensional wake is studied as it accelerates at the trailing edge of a splitter plate. The nonparallelism of the flow is a leading-order effect in the calculation of the basic state, which is obtained numerically. Neutral stability characteristics are computed and the hypersonic stability is obtained by increasing the Mach number. It is found that the stability characteristics are altered significantly as the wake develops. Multiple modes (secondary modes) are found in the near wake that are closely related to the corresponding Blasius ones, but as the wake develops mode multiplicity is delayed to higher and higher Mach numbers. At a distance of about one plate length from the trailing edge, there is only one mode in a Mach number range of 0-20. The dominant mode emerging at all wake stations, and for high enough Mach numbers, is the so-called vorticity mode that is centered around the generalized inflection point layer. The structure of the dominant mode is also obtained analytically for all streamwise wake locations and it is shown how the far-wake limit is approached. Asymptotic results for the hypersonic mixing layer given by a tanh and a Lock distribution are also given.

Papageorgiou, Demetrios T.↗

Boundary layer flow of air over water on a flat plate

A non-similar boundary layer theory for air blowing over a water layer on a flat plate is formulated and studied as a two-fluid problem in which the position of the interface is unknown. The problem is considered at large Reynolds number (based on x), away from the leading edge. A simple non-similar analytic solution of the problem is derived for which the interface height is proportional to x(sub 1/4) and the water and air flow satisfy the Blasius boundary layer equations, with a linear profile in the water and a Blasius profile in the air. Numerical studies of the initial value problem suggests that this asymptotic, non-similar air-water boundary layer solution is a global attractor for all initial conditions.

Nelson, John↗

Effect of Density Gradients in Confined Supersonic Shear Layers: Three-Dimensional Modes - 2

The effect of density gradients on three-dimensional (3-D) supersonic acoustic modes and 3-D subsonic modes in a compressible confined shear layer were investigated using linear analysis. The compressible Rayleigh equation with the solution of the steady compressible boundary layer equations as its basic profiles was solved for two different density ratios, 1.398 and 3.0, and several spanwise wave numbers. For a density ratio of 1.398, the 2-D Co, mode had the highest growth rate for a fixed aspect ratio BIH=2. At the higher-density ratio, the 3-D mode had a slightly higher maximum growth rate than the two-dimensional (2-D) mode, and the maximum growth rate was at a location where the phase speed was supersonic with respect to the fast stream.

Peroomian, Oshin↗

Measurement of Initial Conditions at Nozzle Exit of High Speed Jets

The time averaged and unsteady density fields close to the nozzle exit (0.1 less than or = x/D less than or = 2, x: downstream distance, D: jet diameter) of unheated free jets at Mach numbers of 0.95, 1.4, and 1.8 were measured using a molecular Rayleigh scattering based technique. The initial thickness of shear layer and its linear growth rate were determined from time-averaged density survey and a modeling process, which utilized the Crocco-Busemann equation to relate density profiles to velocity profiles. The model also corrected for the smearing effect caused by a relatively long probe length in the measured density data. The calculated shear layer thickness was further verified from a limited hot-wire measurement. Density fluctuations spectra, measured using a two-Photomultiplier-tube technique, were used to determine evolution of turbulent fluctuations in various Strouhal frequency bands. For this purpose spectra were obtained from a large number of points inside the flow; and at every axial station spectral data from all radial positions were integrated. The radially-integrated fluctuation data show an exponential growth with downstream distance and an eventual saturation in all Strouhal frequency bands. The initial level of density fluctuations was calculated by extrapolation to nozzle exit.

Panda, J.↗

Journal and Wave Bearing Impedance Calculation Software

The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

Hanford, Amanda↗

Hypersonic Boundary-Layer Transition on Blunted Cones at Angle of Attack

Experimental studies of cones at several high-speed facilities have demonstrated that, for small nosetip bluntness, transition onset over a circular cone moves upstream along the leeward side and downstream along the windward side, but this trend may be reversed at large bluntness values, where transition onset moves downstream along the leeward side and upstream along the windward side. A theoretical and numerical investigation is performed to characterize the effects of nose bluntness on disturbance amplification over the circular cone for several angles of attack, with the goal of understanding the potential physical mechanisms behind the experimental observations. The three-dimensional laminar basic states over a 1.5 m long, 7-degree half-angle cone with 9.525 mm nosetip radius are computed for selected angles of attack values and freestream conditions that are selected to match the Mach 10 experiments conducted within the Hypervelocity Wind Tunnel 9 at the Arnold Engineering Development Complex (AEDC). The solutions at a freestream unit Reynolds number of 17.1 million per meter are used to perform detailed instability analyses for angles of attack equal to 0, 1, 3, and 5 degrees. Results indicate that the linear amplification of stationary crossflow waves along inflection lines may begin to influence transition along the acreage of the cone for angles of attack equal to or larger than 5 degrees. The measured trend in transition front with respect to increasing angle of attack is found to be consistent with the predicted increase in the amplification factors for Mack mode disturbances along the streamline trajectories. The increase in Mack mode amplification along the windward ray for higher angles of attack is shown to be the result of a progressively earlier entropy-layer swallowing. Computations also indicate that the transition amplification factor along the windward ray is not constant and increases with the angle of attack and that the transition #-factors along the leeward ray are rather small. The nonmodal analysis for zero degrees angle of attack shows that entropy-layer disturbances with appreciably strong energy growth can coexist with Mack mode instabilities at the measured transition location.

Boundary Layer Transition↗

Spatial and Seasonal Variations in C3Hx Hydrocarbon Abundance in Titan's Stratosphere from Cassini CIRS Observations

Of the C3Hx hydrocarbons, propane (C3H8) and propyne (methylacetylene, CH3C2H) were first detected in Titan’s atmosphere during the Voyager 1 flyby in 1980. Propene (propylene, C3H6) was first detected in 2013 with data from the Composite InfraRed Spectrometer (CIRS) instrument on Cassini. We present the first measured abundance profiles of propene on Titan from radiative transfer modeling, and compare our measurements to predictions derived from several photochemical models. Near the equator, propene is observed to have a peak abundance of 10 ppbv at a pressure of 0.2 mbar. Several photochemical models predict the amount at this pressure to be in the range 0.3–1 ppbv and also show a local minimum near 0.2 mbar which we do not see in our measurements. We also see that propene follows a different latitudinal trend than the other C3 molecules. While propane and propyne concentrate near the winter pole, transported via a global convective cell, propene is most abundant above the equator. We retrieve vertical abundances profiles between 125 km and 375 km for these gases for latitude averages between 60°S–20°S, 20°S–20°N, and 20°N–60°N over two time periods, 2004 through 2009 representing Titan’s atmosphere before the 2009 equinox, and 2012 through 2015 representing time after the equinox. Additionally, using newly corrected line data, we determined an updated upper limit for allene (propadiene, CH2CCH2, the isomer of propyne). We claim a 3-σ upper limit mixing ratio of 2.5 × 10(exp −9) within 30° of the equator. The measurements we present will further constrain photochemical models by refining reaction rates and the transport of these gases throughout Titan’s atmosphere.

Lombardo, Nicholas A.↗

Spatial and Seasonal Variations in C3Hx Hydrocarbon Abundance in Titan’s Stratosphere from Cassini CIRS Observations

Of the C3Hx hydrocarbons, propane (C3H8) and propyne (methylacetylene, CH3C2H) were first detected in Titan’s atmosphere during the Voyager 1 flyby in 1980. Propene (propylene, C3H6) was first detected in 2013 with data from the Composite InfraRed Spectrometer (CIRS) instrument on Cassini. We present the first measured abundance profiles of propene on Titan from radiative transfer modeling, and compare our measurements to predictions derived from several photochemical models. Near the equator, propene is observed to have a peak abundance of 10 ppbv at a pressure of 0.2 mbar. Several photochemical models predict the amount at this pressure to be in the range 0.3 - 1 ppbv and also show a local minimum near 0.2 mbar which we do not see in our measurements. We also see that propene follows a different latitudinal trend than the other C3 molecules. While propane and propyne concentrate near the winter pole, transported via a global convective cell, propene is most abundant above the equator. We retrieve vertical abundances profiles between 125 km and 375 km for these gases for latitude averages between 60◦S to 20◦S, 20◦S to 20◦N, and 20◦N to 60◦N over two time periods, 2004 through 2009 representing Titan’s atmosphere before the 2009 equinox, and 2012 through 2015 representing time after the equinox. Additionally, using newly corrected line data, we determined an updated upper limit for allene (propadiene, CH2CCH2), the isomer of propyne). The measurements we present will further constrain photochemical models, by refining reaction rates and the transport of these gases throughout Titan’s atmosphere.

Nicholas A. Lombardo↗

Modeling of the heat transfer in bypass transitional boundary-layer flows

A low Reynolds number k-epsilon turbulence model and conditioned momentum, energy and turbulence equations were used to predict bypass transition heat transfer on a flat plate in a high-disturbance environment with zero pressure gradient. The use of conditioned equations was demonstrated to be an improvement over the use of the global-time-averaged equations for the calculation of velocity profiles and turbulence intensity profiles in the transition region of a boundary layer. The approach of conditioned equations is extended to include heat transfer and a modeling of transition events is used to predict transition onset and the extent of transition on a flat plate. The events, which describe the boundary layer at the leading edge, result in boundary-layer regions consisting of: (1) the laminar, (2) pseudolaminar, (3) transitional, and (4) turbulent boundary layers. The modeled transition events were incorporated into the TEXSTAN 2-D boundary-layer code which is used to numerically predict the heat transfer. The numerical predictions in general compared well with the experimental data and revealed areas where additional experimental information is needed.

Simon, Frederick F.↗

Limb effects in satellite temperature sounding

To date, operational satellite temperature retrievals from the TIROS-N/NOAA A-G series of satellites and a large percentage of those produced for research purposes have used statistical techniques to estimate limb effects in satellite-observed radiances. In this study, temperature profiles were derived using the radiative transfer equation in a form which properly takes into account the angle of observation. These temperature profiles were then compared to those derived using the radiative transfer equation with 'nadir radiances' produced by a statistical limb correction technique similar to those now used operationally. This comparison revealed significant differences in the derived temperature profiles at large viewing angles, particularly in the case of strong meridional temperature gradients. Overall, the results suggest that for the calculation of temperature profiles from nonnadir observations, the more proper physical solution is the preferred procedure for deriving temperature fields.

Le Marshall, J. F.↗