Search NASA⌕ Search

SEARCH · Search NASA

Results for “EROSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Composition and persistence of soil organic matter along eroding and depositional transects in buried vs. modern soil layers: A case of the Brady paleosol at Wauneta, Nebraska

Paleosols form when soils are buried through deposition by aeolian, colluvial, alluvial or other processes. Burial of former topsoil isolates soil organic matter (SOM) from surface conditions, allowing carbon to accumulate and potentially remain stable for millennia. In this study, SOM composition, distribution, and persistence were analyzed in the Brady Soil of Nebraska, USA to compare SOM spatial variability in modern and buried soils, as well as the impact of erosional exposure on SOM stability. The Brady Soil, formed as a surface soil during the Pleistocene-Holocene transition and now a paleosol buried up to 6 m deep (or more) by loess deposition during the Holocene, was sampled along burial (up to 5.8 m depth) and erosional (up to 1.8 m depth) transects to compare SOM dynamics in different geomorphic settings. Fourier Transform Infrared Spectroscopy (FTIR) and Fourier Transform ion cyclotron resonance mass spectrometry (FTICR-MS) were used to analyze SOM composition, while δ 13 C isotope analyses identified SOM sources and radiocarbon values were used to estimate turnover rates. Results confirmed a vegetation shift from C3 to C4 plants after Brady Soil formation, reflecting warming climatic conditions. Increasing SOM age and decreasing δ 13 C and δ 15 N values with depth indicated slowing of decomposition rate in buried soils. Higher pH in the Brady Soil suggested greater base cation content, supporting SOM stabilization through organo-mineral associations and aggregate formation. However, exposure of the Brady Soil due to surface erosion caused faster SOM turnover. This result suggested susceptibility of buried SOM to losses via decomposition upon erosional exposure, possibly accelerated by priming in response to modern SOM inputs. These findings highlight the potential loss of carbon stocks in buried soils under future climate change, as shifts in soil physicochemical properties may destabilize long-preserved SOM.

Environmental sciences↗
DOE OSTI2024

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

An integrated modeling framework for investigating the application of solid boron (B) powder injection for real-time surface conditioning of plasma-facing components (PFCs) in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper (IPD) setup, this study simulates B powder injection scenarios ranging from milligrams to tens of milligrams per second, corresponding to boron flux rates of 10 20 –10 21 B/s in standard L-mode conditions. The comprehensive modeling approach combines EMC3-EIRENE for simulating the deuterium plasma background and the Dust Injection Simulator (DIS) for the ablation and transport of the boron powder particles. EMC3 trace impurity fluid modeling results show substantial boron transport to the inboard lower divertor, predominantly influenced by the main ion plasma flow. The dependency on powder particle size (5-250 µm) was found to be insignificant for the scenario considered. The effects of erosion and redeposition were considered to reconcile the discrepancies with experimental observations, which saw substantial deposition on the outer divertor plasma-facing components. For this purpose, the WallDYN3D code was updated to include boron sources within the plasma domain and integrated into the modeling framework. The mixed-material migration modeling shows evolving boron deposition patterns, suggesting the formation of mixed B-C layers or predominantly B coverage depending on the powder mass flow rate. While the modeling outcomes at lower B injection rates tend to align with DIII-D experimental observations, the prediction of near-pure boron layers at higher rates has yet to be experimentally verified in the carbon environment of the DIII-D tokamak. The extensive reach of boron layers found in the modeling suggests the need for modeling that encompasses the entire wall geometry for more accurate experimental correlations. This integrated approach sets a precedent for analyzing and applying real-time in-situ boron coating techniques in advanced tokamak scenarios, potentially extendable to ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Predictive outlook for experiments resolving prompt vs local redeposition of high- Z materials in tokamaks

High-Z plasma facing components redeposit within the sheath through a combination of two distinct mechanisms: prompt (or geometric-driven) and local (or sheath-driven) redeposition. Experimental efforts are needed to determine the leading-order parameters influencing prompt-vs-local trade-off, which sets the fraction of material entering the scrape-off layer. In preparation for such experiments, leading-order parameters are isolated within the PYEAD-RustBCA-GITR coupled net erosion code using Sobol’ sensitivity analysis. Then, experiments resolving prompt-vs-local trade-off under variation of these leading-order parameters are proposed using an isotopic coupon design with multifaceted diagnostic coverage. The measurability of these experiments is evaluated using synthetic diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Characterization of W production during ICRF operations: experiments and modeling

For successfully heating plasma with waves in the ion cyclotron range of frequencies (ICRFs), mitigating impurity production is just as crucial as maximizing power coupling, especially in high-Z environments. ICRF can effectively deposit energy on ions, modify turbulence-driven transport, and enhance fusion reaction efficiency, but only when its power coupling has minimal impact on impurity production. To do so, one must rely on a toroidal array of at least three active elements excited with appropriate phasing and power ratio to reduce the currents induced on the antenna frame below levels critical for physical sputtering. In contrast to classic two-strap antennas, which are optimized for dipole phasing with equal power on both straps, three-strap antennas in ASDEX Upgrade (AUG)—but also four-strap antennas in JET, Alcator C-Mod, SPARC and ITER—offer the possibility to act also on the power ratio between the central and outer straps. With optimal settings, impurity production can be reduced substantially, making the ICRF compatible with the high-Z wall. This paper explores the characteristics of the AUG three-strap antennas in terms of impurity production, as well as the key role of plasma composition in this process. Numerical simulations were performed using SSWICH and Petra-M (finite element codes) to quantify impurity production and compare with experimental results. Energies of ions falling on antenna limiters (measured with probes) are well predicted by both codes. These tools are then used to further describe the source of the impurity, namely the gross erosion of tungsten from an ICRF antenna, for different plasma mixtures. Results are also compared to spectroscopy data. Ultimately, we show that deleterious effects of the ICRF on plasma surface interactions will be weaker in plasmas containing larger fractions of highly ionized heavier low-Z impurity, which is typically relevant for experiments relying on impurity seeding.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pool Boiling Reliability Tests and Degradation Mechanisms of Microporous Copper Inverse Opal (CuIOs) Structures

The rising power density in electronic systems requires thermal management solutions that are both high-performing and reliable. Porous materials such as Copper Inverse Opal (CuIOs) have unique structural features, including high permeability and high thermal conductivity, to enhance pool boiling performance. However, there is little understanding of the degradation mechanism of such porous materials under pool boiling conditions. In this study, samples of 10 ..mu..m thick CuIOs with 4.8 ..mu..m diameter, covering silicon substrate of area 11 mm x 11 mm, with various heated areas ranging from 2.5 mm x 2.5 mm to 10 mm x 10 mm, were tested in 100 degrees C deionized water at a constant heat flux of 110 Wcm -2 for 3-to-7 days. The combined effect of erosion and corrosion caused structural degradation of the CuIOs. The directly heated area had the most severe degradation while the edge of the heater and the unheated area showed progressively less degradation, maintaining some CuIOs structure even after the 7-day reliability test. Among all the tested samples with various heater sizes, the 2.5 mm x 2.5 mm heater sample - in which the heater size was designed to be comparable to the water bubble characteristic length - had the largest critical heat flux (CHF) up to 300 Wcm -2 with a superheat ~ 13 degrees C. Additionally, CuIOs with a smaller heated area performed better in terms of reliability. This study offers preliminary insights into CuIOs degradation mechanisms, contributing to the development of more robust thermal management solutions. We expect that electroless plating of CuIOs with gold (Au), nickel (Ni), and atomic layer deposition (ALD) aluminum oxide (Al 2 O 3 ) in combination with appropriate application-specific coolants will further improve the reliability and lifetime of the CuIOs.

boiling-induced degradation↗
DOE OSTI2026

Residue Retention Requirement (Crop Residues)

County-level minimum residue (dry tons/acre/year) required to remain on fields to maintain soil carbon and limit erosion; defines the biophysical constraint on residue removal.

crop residue↗
DOE OSTI2024

Novel One-Step Production of Carbon-Coated Sn Nanoparticles for High-Capacity Anodes in Lithium-Ion Batteries

Lithium-ion batteries offer the highest energy density of any currently available portable energy storage technology. By using different anode materials, these batteries could have an even greater energy density. One material, tin, has a theoretical lithium capacity (994 mAh/g) over three-times higher than commercial carbon anode materials. Unfortunately, to achieve this high capacity, bulk tin undergoes a large volume expansion, and the material pulverizes during cycling, giving a rapid capacity fade. To mitigate this issue, tin must be scaled down to the nano-level to take advantage of unique micromechanics at the nanoscale. Synthesis techniques for Sn nanoparticle anodes are costly and overly complicated for commercial production. A novel one-step process for producing carbon-coated Sn nanoparticles via spark plasma erosion (SPE) shows great promise as a simple, inexpensive production method. The SPE method, characterization of the resulting particles, and their high-capacity reversible electrochemical performance as anodes are described. With only a 10% addition of these novel SPE carbon-coated Sn particles, one anode composition demonstrated a reversible capacity of ~460 mAh/g, achieving the theoretical capacity of that particular electrode formulation. These SPE carbon-coated Sn nanoparticles are drop-in ready for present commercial lithium-ion anode processing and would provide a ~10% increase in the total capacity of current commercial lithium-ion cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Pool Boiling Reliability Tests and Degradation Mechanisms of Microporous Copper Inverse Opal (CuIOs) Structures: Preprint

The rising power density in electronic systems requires thermal management solutions that are both high-performing and reliable. Porous materials such as Copper Inverse Opals (CuIOs) have unique structural features, including high permeability and high thermal conductivity, to enhance pool boiling performance. However, there is little understanding of the degradation mechanism of such porous materials under pool boiling conditions. In this study, samples of 10-micrometer-thick CuIOs with 4.8-micrometer diameter, covering silicon substrate of area 11-mm by 11-mm, with various heated areas ranging from 2.5-mm by 2.5-mm to 10-mm by 10-mm, were tested in 100 degrees C deionized water at a constant heat flux of 110 watts per square cm for 3-7 days. The combined effect of erosion and corrosion caused structural degradation of the CuIOs. The directly heated area had the most severe degradation while the edge of the heater and the unheated area showed progressively less degradation, maintaining some CuIOs structure even after the 7-day reliability test. Among all the tested samples with various heater sizes, the 2.5-mm by 2.5-mm heater sample - in which the heater size was designed to be comparable to the water bubble characteristic length - had the largest critical heat flux (CHF) up to 300 watts per square cm with a superheat of approximately 13 degrees C. Additionally, CuIOs with a smaller heated area performed better in terms of reliability. This study offers preliminary insights into CuIOs degradation mechanisms, contributing to the development of more robust thermal management solutions. We expect that electroless plating of CuIOs with gold (Au), nickel (Ni), and atomic layer deposition of aluminum oxide in combination with appropriate application-specific coolants will further improve the reliability and lifetime of the CuIOs.

boiling-induced degradation↗
DOE OSTI2025

Molecular Interlocking Multidimensional Modulations of Cathode‐Electrolyte Interface for Constructing High Energy Density Quasi‐Solid‐State Batteries

Gel polymers are regarded as a promising candidate electrolyte for lithium-metal quasi-solid-state batteries, primarily due to their high ionic conductivity and solid-liquid synergistic properties. However, challenges such as interfacial side reactions, limitations in Li + transport caused by interfacial issues, and leaching of transition metals from the cathode have yet to be effectively solved. Herein, a novel gel electrolyte modulation strategy based on electrostatic filler assembly is proposed to address the issues of ineffective capacity utilization and inadequate cycling stability of high-energy-density cathode materials in solid-state lithium-ion batteries. It constructs a 3D interpenetrating charge-bridge network that effectively tackles the phase-separation challenge between fillers and electrolytes at the molecular level. Meanwhile, the molecular interlocking structure effectively inhibits the electrolyte erosion. More critically, it optimizes and stabilizes the cathode-electrolyte interface film, which facilitates the conduction of Li + -ions through a size-sieving mechanism. Consequently, this strategy enables effective adaptation across diverse high-energy-density cathode materials with satisfactory capacity performance (170.4 mAh g −1 at 4.5 V/1 C for LiNi 0.6 Co 0.2 Mn 0.2 O 2 and 194.0 mAh g −1 at 4.3 V/1 C for LiNi 0.9 Co 0.08 Mn 0.02 O 2 ). In conclusion, this investigation offers a straightforward and effective reference for addressing the critical challenges of ionic transport and interface stabilization in the design of gel electrolytes.

cathode-electrolyte interface↗
DOE OSTI2026

Long‐term growth and persistence of granitic inselbergs in a semi‐arid cratonic landscape

Granitic inselbergs are enduring landforms that punctuate planation surfaces in tectonically stable settings, yet the mechanisms and timescales of their persistence remain debated. Here, in this study, we present a multinuclide cosmogenic dataset ( 10 Be, 26 Al and 21 Ne) from bedrock, fluvial sediments and planation surfaces in the semi-arid Central Ceará Domain, north-eastern Brazil, to quantify denudation rates and reconstruct the long-term dynamics of residual relief formation. This triple-nuclide approach enables independent validation of denudation contrasts and long-term exposure histories, providing quantitative constraints on inselberg evolution that a single-nuclide approach could not resolve. Bedrock denudation rates (1–4 m Myr −1 ) are systematically lower than basin-wide rates (8–14 m Myr −1 ), revealing a regional pattern of vertical differential denudation. When combined with summit elevations and surface exposure ages of up to 5 Myr, these contrasts suggest that cumulative relief growth has been operating over timescales of tens of millions of years (1–57 Myr). Morphological and structural observations further indicate localized mass wasting and heterogeneous erosion styles, modulated by rock fabric and joint density. Cosmogenic nuclide inventories in detrital sediments reveal partial reworking from older sediment stocks, including surface pebbles with exposure ages up to 5 Myr, which record multistage of burial and re-exposure histories and reflect episodic remobilization in low-connectivity, semi-arid catchments. Rather than static relicts of ancient surfaces, inselbergs in this cratonic setting emerge as dynamic landforms actively sustained by slow but persistent differential denudation. These results provide new constraints on long-term cratonic landscape evolution and underscore the interplay between lithological resistance, structural inheritance and sediment transfer processes in sustaining topographic relief. They also call for a critical reassessment of classical inselberg models, suggesting that hybrid mechanisms, rather than single-process paradigms, more accurately capture the complexity of residual landform development in cratonic interiors.

Cosmogenic nuclides↗
DOE OSTI2025

Phosphorus and cover crop management practices affect phosphorus speciation in soils and eroded sediments

Abstract Agricultural runoff often contains P in dissolved and sediment‐bound forms, decreasing surface water quality. No‐till and cover cropping conservation practices have been recommended for reducing erosion and nutrient loss from cropping systems. The overall aims of this study were to characterize and evaluate the effects of fertilizer (placement and source) and cover crop management on P speciation in surface runoff sediments and source soil. In 2014, a field‐scale experiment was established in a no‐till, corn (Zea maysL.)–soybean (Glycine maxL.) cropping system with two cover crop treatments (with and without a winter crop; winter wheat [Triticum aestivumL.], rapeseed [Brassica napusL.], hairy vetch [Vicia villosaRoth], winter triticale [×Triticosecale Wittm.], and cereal rye [Secale cerealeL.]) and three P fertilizer management treatments (no P, fall broadcast diammonium phosphate, and spring subsurface injected ammonium polyphosphate). Phosphorus fractionation in the source soil collected in the fall of 2019 and sediment samples collected throughout 2020 were analyzed using a modified sequential P extraction method to evaluate the cumulative effects of imposing the treatment factors over 5 years. The direct P speciation was done using X‐ray absorption near edge structure spectroscopy. The indirect P speciation (fractionation) results showed that the management practices affected the exchangeable, organic matter‐associated, and Fe‐bound P fractions in sediments and the exchangeable and residual fractions in source soil. Direct P speciation results showed a depletion of Fe‐associated P in soil and sediment from cover crop treatment, suggesting that Fe‐associated P species were affected by cover crops. Changes in soil and runoff sediment P speciation would change the proportions and forms of soluble and particulate P in runoff sediments and may influence P bioavailability in aquatic ecosystems. Developing P fertilizer and cropping system management options with an understanding of soil P transformations helps maintain environmental sustainability.

Environmental Sciences & Ecology↗
DOE OSTI2024

Techno‐Economic Analysis of Additively‐Manufactured Wind Turbine Blade Tips That Enable Technology Integration

The Additively‐Manufactured, System‐Integrated Tip (AMSIT) project is leveraging the flexibility of 3D printing to integrate several technologies in a wind turbine blade tip, while reducing the levelized cost of electricity (LCOE) produced. The design integration is demonstrated for a 200‐kW–scale turbine with 13‐m blades, with the outer 15% of the blade replaced with a 3D‐printed design. Aerodynamic performance is enhanced without increasing swept area through inclusion of a winglet and surface texturing, both challenging for traditional manufacturing. Longevity and durability are improved through integrated lightning and leading edge erosion protection. Increased power, reduced repair frequency, and ease of repair through blade modularity all contribute to reduced LCOE. The analysis is also extended to modern MW‐scale designs to estimate the impact of the technology at scale, demonstrating the potential to reduce LCOE significantly for modern onshore turbines, with even higher potential savings offshore.

3D printing↗
DOE OSTI2024

Seasonal Sulfur Redox Cycling in Two Constructed Wetlands with Insight on How They Age

Long-term metal remediation in wetland treatment systems (WTSs) involves facilitating dissimilatory sulfate reduction to produce sulfide and mineralize metals in deep sediments. We evaluated seasonal sulfur cycling in two constructed wetlands (Maintained WTS constructed in 2007, and the Unmaintained WTS constructed in 2000) on the Savannah River Site in Aiken, South Carolina, USA. Significant interactions in sulfide concentration were observed between sediment depth, season, and wetland (F = 4.64, df = 11, P = 3.28 × 10 − 5). In the Maintained WTS, dissimilatory sulfate reduction dominated the surface sediments during the warm season (0–2 cm depth, t=-2.66, P = 9.70 × 10 − 3), unlike the Unmaintained system. Sulfate concentrations in pore waters increased in the warm season (F = 7.84, df = 1, P = 6.50 × 10 − 3), contrary to expectations. Sulfur limitation in the Unmaintained WTS during the warm season correlated with increased sulfur assimilation in giant bulrush. Lower sulfide concentrations in surface sediments of the Unmaintained WTS illustrated aging effects. The Maintained WTS shows potential for managing erosion, pH reduction, and sulfur limitation observed in the older Unmaintained WTS.

Biogeochemistry↗
DOE OSTI2025

Mobilization of mercury from contaminated creekbank soils

The industrial use of mercury (Hg) led to the contamination of numerous watersheds worldwide, including the East Fork Poplar Creek (EFPC) in Tennessee, USA. Mercury can accumulate in creek banks and floodplain soils and is mobilized into downstream environments due to erosion from precipitation and flooding. Here, this study aimed to evaluate the geochemical conditions contributing to the release of Hg from contaminated soils in this watershed. Bank soil samples from the EFPC watershed with total Hg concentrations ranging from 27.2 to 1,425 mg·kg −1 were used in a series of batch experiments with artificial creek water at a solid-to-solution ratio of 1:30 to assess Hg release. Additional experiments examined Hg release across different soil size fractions and solid-to-solution ratios, as well as the effect of dissolved organic matter and time on Hg mobilization. Mercury release ranged from 0.011 to 0.17% of the total soil Hg and is correlated with total Hg concentrations. Variations in release among size fractions suggested heterogeneous distribution of labile Hg species. Results indicated two distinct solubility regimes depending on solid-to-solution ratios. Dissolved organic matter enhanced Hg release, and time-dependent experiments showed that changes in mercury speciation could decrease dissolved Hg concentrations over time. Identifying conditions that promote Hg mobilization from contaminated soils improves our understanding of Hg fluxes into downstream environments. Key factors influencing mercury release include soil characteristics, water chemistry, and temporal changes in mercury speciation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

An Anisotropic Yield and Damage Material Model to Improve the Contact Pressure Analysis in a Biomass Shredding System

Size reduction systems used in biomass processing break biomass into smaller pieces by utilizing the kinetic energy from the sharp rotating blades. Abrasive and/or erosive wear caused by biomass comminution results in blade wear of the sharp edged cutters, deteriorating the process efficiency. Here, this study aims to optimize the blade design and improve the system efficiency by attempting to understand the interactions between the blades and biomass particles. Since real-time monitoring of these interactions is impractical during operation, mechanical simulations offer a viable alternative for investigating the shredding process. Yet, the irregular geometry and complex mechanical properties of biomass—such as the anisotropic nature of woodchips and their nonlinear fracture behavior—pose significant challenges for accurately simulating contact pressure. In this work an anisotropic yield material model, along with a damage initiation and evolution function, is applied to the woodchip particle to study the contact pressure on shredder blade, offering a scientific basis for improved blade design and process efficiency. This approach can be extended to other biomass processing systems with similar anisotropic feedstocks, making it a valuable tool for advancing sustainable biomass utilization.

09 - BIOMASS FUELS↗
DOE OSTI2024

Micro-cold Spray Deposition of YSZ Films from Ultrafine Powders Using a Pressure Relief Channel Nozzle

Abstract The use of ultrafine powders in the micro-cold spray (MCS) process, also referred to as the aerosol deposition method, typically results in porous and/or poorly adhering films because the particles do not impact at a high enough velocity for sufficient plastic deformation and interparticle bonding to occur. Under typical operating conditions, particles < 100 nm accelerate to high velocities but then are slowed by the stagnant gas in the bow shock that forms just upstream of the substrate. Using larger particles reduces particle slowing, but large particles can cause erosion of the film at high impact velocity, decreasing deposition efficiency. In this study, a pressure relief channel nozzle using helium as a carrier gas is proposed such that high-velocity deposition of yttria-stabilized zirconia particles as small as 10 nm in diameter is possible. This is well below the size range of powders previously used for MCS. The proposed nozzle design increases impact velocities for 10, 20, and 50 nm particles by ~ 880, 560, and 160 m/s, respectively, when compared to a conventional nozzle. Experimental deposition of ultrafine 8YSZ powder shows that the pressure relief channel nozzle results in lower porosity and more uniform deposits, with a ∼ 186% increase in deposition efficiency.

Materials Science↗
DOE OSTI2024

Liquid metal walls

Here, the plasma performance of fusion devices depends strongly on the chosen wall materials. Solid plasma-facing components (PFCs) are predominantly used in present devices, and are the most investigated candidates for fusion designs. High-Z materials such as tungsten (W) are the leading solid PFC material candidates. To date, a material choice that scales to steady-state reactor conditions has not been identified. Moreover, if plasma transient events such as edge-localized modes and disruptions cannot be altogether avoided or sufficiently mitigated, the projected peak heat and particle loads far exceed the power exhaust capabilities of solids. Liquid metal (LM) PFCs represent an intrinsic self-healing boundary that are both resilient to surface damage from transients, and that could handle high steady-state heat and particle fluxes. Flowing LM PFCs can be designed to remove “slag,” the buildup of material erosion due to plasma-material interactions, including charge exchange sputtering in the main chamber. Further, LM offer the prospect to manage hydrogenic species otherwise retained in the PFCs, which is important from a safety and inventory standpoint. The two most promising LMs are lithium (Li) and tin (Sn), although Sn–Li eutectics may be considered. While Sn offers a higher temperature window with low vapor pressure and low hydrogen retention, Li offers the prospect of enhanced energy confinement and higher acceptable core contamination limits, and this section focuses on Li PFCs. An LM PFC development research program developed LM PFC concepts for a nuclear fusion device via engineering design calculations, single-effect experiments, and staged prototypical experiments. A self-consistent design window was identified with liquid Li flow speeds ~5–10 m/s; plasma contamination was negligible for predicted Li evolution rates. While these preconceptual designs hold promise, there is substantial R&D needed to advance the technical readiness levels of LM PFCs for application to fusion power plants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A model for oblique impacts on material surfaces

Many practical situations of material damage, wear, and erosion involve collisions between small particles and surfaces at inclined angles. While there are many well-validated models of normal incidence impact situations, elastic-plastic models for oblique incidence impact events are lacking. Here the finite element method is used to predict the normal and tangential coefficient of restitution in oblique impacts for hard, elastic spheres impacting an elastic-perfectly plastic material surface. The proposed model covers various impact angles ranging from 0° to 45°, within a limiting impact velocity below which the effects of heating are negligible. The normal coefficient of restitution follows power-laws with respect to normalized values of the impact velocity. Interestingly, the tangential coefficient of restitution follows a linear relationship with impact velocity. Together, these results provide a semi-empirical set of equations predicting oblique impact rebounds (both velocity and trajectory) for a wide range of conditions and material properties, with which experimental results can be rapidly interpreted. As a result, Laser-Induced Particle Impact Test (LIPIT) data are also presented for aluminum particles impacting aluminum substrates, at impact angles of 25° and 40°; the results compare favorably with the model and validate the general use of such models for the analysis of experimental data.

Coefficient of restitution↗