Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXHAUST GASES - TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The production of nitric oxide in the troposphere as a result of solid-rocket-motor afterburning

As part of an ongoing assessment of the environmental effects of solid-rocket-motor operations in the troposphere, estimates were made of the nitric oxide produced in the troposphere by the space shuttle and Titan 3-C boosters. Calculations were made with the low-altitude plume computer program and included the effects of coupled finite-rate chemistry and turbulent mixing. A recent measurement of nitric oxide taken in the effluent cloud of a Titan 3-C booster is compared with calculations made with this computer code. The various chemical reactions of the exhaust gases are listed in tabular form.

Stewart, R. B.↗
NASA NTRS1976

Experimental measurements of the ground cloud growth during the 11 February 1974, Titan-Centaur launch at Kennedy Space Center

The Titan-Centaur was launched from Kennedy Space Center on February 11, 1974 at 0948 eastern daylight time. Ground level effluent measurements were obtained from the solid rocket motors for comparison with NASA diffusion models for predicting effluent ground level concentrations and cloud behavior. The results obtained provide a basis for an evaluation of such key model inputs such as cloud rise rate, stabilization altitude, crosswind growth, volume expansion, and cloud trajectory. Ground level effluent measurements were limited because of changing meteorological conditions, incorrect instrument location, and operational problems. Based on the measurement results, operational changes are defined. Photographs of the ground exhaust clouds are shown. The chemical composition of the exhaust gases was analyzed and is given.

Stewart, R. B.↗
NASA NTRS1976

Combustion modeling in internal combustion engines

The fundamental assumptions of the Blizard and Keck combustion model for internal combustion engines are examined and a generalization of that model is derived. The most significant feature of the model is that it permits the occurrence of unburned hydrocarbons in the thermodynamic-kinetic modeling of exhaust gases. The general formulas are evaluated in two specific cases that are likely to be significant in the applications of the model.

Zeleznik, F. J.↗
NASA NTRS1976

The environs of Viking 2 lander

Forty-six days after Viking 1 landed, Viking 2 landed in Utopia Planitia, about 6500 kilometers away from the landing site of Viking 1. Images show that in the immediate vicinity of the Viking 2 landing site the surface is covered with rocks, some of which are partially buried, and fine-grained materials. The surface sampler, the lander cameras, engineering sensors, and some data from the other lander experiments were used to investigate the properties of the surface. Lander 2 has a more homogeneous surface, more coarse-grained material, an extensive crust, small rocks or clods which seem to be difficult to collect, and more extensive erosion by the retroengine exhaust gases than lander 1. A report on the physical properties of the Martian surface based on data obtained through sol 58 on Viking 2 and a brief description of activities on Viking 1 after sol 36 are given.

Shorthill, R. W.↗
NASA NTRS1978

Modified chemiluminescent NO analyzer accurately measures NOX

Installation of molybdenum nitric oxide (NO)-to-higher oxides of nitrogen (NOx) converter in chemiluminescent gas analyzer and use of air purge allow accurate measurements of NOx in exhaust gases containing as much as thirty percent carbon monoxide (CO). Measurements using conventional analyzer are highly inaccurate for NOx if as little as five percent CO is present. In modified analyzer, molybdenum has high tolerance to CO, and air purge substantially quenches NOx destruction. In test, modified chemiluminescent analyzer accurately measured NO and NOx concentrations for over 4 months with no denegration in performance.

Summers, R. L.↗
NASA NTRS1983

The NASA/Goddard balloon borne lidar system

The present investigation represents a part of a NASA program which is concerned with a study regarding the seriousness of man-made stratospheric ozone depletion. Such a depletion could possibly be caused by exhaust gases of aircraft at high altitudes or the release of chlorofluorocarbons into the lower atmosphere. A balloon-borne optical radar system was employed to conduct ozone measurements in the altitude region from 21 to 36 km and hydroxyl radical measurements in the region from 33 to 36 km. The hydroxyl radical was determined by making use of a procedure which is based on fluorescence induced by laser radiation. The technique of differential absorption lidar (DIAL) was used to measure ozone. According to this technique, two wavelengths are transmitted simultaneously and their backscattered intensities are measured. the obtained results show that optical radar represents an effective tool for stratospheric investigations.

Heaps, W. S.↗
NASA NTRS1983

A design study of a reaction control system for a V/STOL fighter/attack aircraft

Attention is given to a short takeoff vertical landing (STOVL) aircraft reaction control system (RCS) design study. The STOVL fighter/attack aircraft employs an existing turbofan engine, and its hover requirement places a premium on weight reduction, which eliminates prospective nonairbreathing RCSs. A simple engine compressor bleed RCS degrades overall performance to an unacceptable degree, and the supersonic requirement precludes the large volume alternatives of thermal or ejector thrust augmentation systems as well as the ducting of engine exhaust gases and the use of a dedicated turbojet. The only system which addressed performance criteria without requiring major engine modifications was a dedicated load compressor driven by an auxilliary power unit.

Beard, B. B.↗
NASA NTRS1983

An analysis of cryotrap heat exchanger performance test data (400 area) and recommendations for a system to handle Apollo RCS engines

The current arrangement of a Platecoil heat exchanger which uses LN2 on the inside of parallel tubes, in counter flow to the test cell engine exhaust gases which are drawn through a box surrounding the plates by the existing vacuum blowers is examined. As a result of inadequate performance and special test data it was decided to redesign the system to accommodate an Apollo RCS engine.

Rakow, A.↗
NASA NTRS1987

Ozone and the stratosphere

It is shown that the stratospheric ozone is effective in absorbing almost all radiation below 300 nm at heights below 300 km. The distribution of global ozone in the troposphere and the lower stratosphere, and the latitudinal variations of the total ozone column over four seasons are considered. The theory of the ozone layer production is discussed together with catalytic reactions for ozone loss and the mechanisms of ozone transport. Special attention is given to the anthropogenic perturbations, such as SST exhaust gases and freon gas from aerosol cans and refrigerators, that may cause an extensive destruction of the stratospheric ozone layer and thus have a profound impact on the world climate and on life.

Shimazaki, Tatsuo↗
NASA NTRS1989

Static internal performance of a nonaxisymmetric vaned thrust reverser with flow splay capability

An investigation was conducted in the Static Test Facility of the Langley 16-Foot Transonic Tunnel on a dual-port, nonaxisymmetric, block-and-turn type thrust reverser model with vane cascades in the reverser ports which turned the flow in the splay direction and aided in turning the flow in the reverse direction. Splaying reverser flow is a method of delaying to lower landing ground roll speeds the reingestion of hot exhaust flow into the inlets. Exhaust flow splay can also help prevent the impingement of hot exhaust gases on the empennage surfaces when the reverser is integrated into an actual airframe. The vane cascades consisted of two sets of perpendicular vanes with a variable number of turning and splay vanes. A skewed vane box was also tested which had only one set of vanes angled to provide both turning and splay. Vane cascades were designed to provide different amounts of flow splay in the top and bottom ports. Inner doors, trim tabs, and an orifice plate all provided means of varying the port area for reverser flow modulation. The outer door position was varied as a means of influencing the flow reverse angle. Nozzle pressure ratio was varied from 1.75 to approximately 6.00.

Bangert, Linda S.↗
NASA NTRS1990

Radiative configuration factors from cylinders to coaxial axisymmetric bodies

Exact solutions are obtained for the radiative configuration factor between differential elements of arbitrary orientation and cylinders. A general method is then proposed for calculating the view factor from a cylinder to a coaxial axisymmetric body using only a single numerical integration. The method is illustrated for axisymmetric bodies with function generators described by a power law equation. The method may be useful in calculating radiative heat transfer between cylindrical bodies and high-density exhaust gases and between annular radiative fins and their bases.

Saltiel, C.↗
NASA NTRS1990

Delivering HST to orbit

NASA's STS 31 mission will involve the lofting of the Hubble Space Telescope into orbit by the Space Shuttle Discovery. The Discovery Remote Manipulator System RMS will be used to robotically lift the HST out of the payload bay and position it for release on the 19th orbit. The Discovery Orbiter will then be slowly backed away from the HST; if there is any indication of an HST aperture door malfunction, Discovery will still possess enough time and propellant to return to the HST and open it with the RMS, but not without risk of the HST optics' contamination by thruster exhaust gases.

Hawley, Steven A.↗
NASA NTRS1991

Propulsion simulator for magnetically-suspended wind tunnel models

The objective of phase two of a current investigation sponsored by NASA Langley Research Center is to demonstrate the measurement of aerodynamic forces/moments, including the effects of exhaust gases, in magnetic suspension and balance system (MSBS) wind tunnels. Two propulsion simulator models are being developed: a small-scale and a large-scale unit, both employing compressed, liquified carbon dioxide as propellant. The small-scale unit was designed, fabricated, and statically-tested at Physical Sciences Inc. (PSI). The large-scale simulator is currently in the preliminary design stage. The small-scale simulator design/development is presented, and the data from its static firing on a thrust stand are discussed. The analysis of this data provides important information for the design of the large-scale unit. A description of the preliminary design of the device is also presented.

Joshi, Prakash B.↗
NASA NTRS1991

Comment on 'The Space Shuttle's impact on the stratosphere' by Michael J. Prather et al

Prather et al. (1990) argued that no local hole in column ozone could occur above the launch site of the Space Shuttle because (1) the HCl in the exhaust would require some time to be converted into more catalytically active forms, (2) the Shuttle trajectory is not vertically aligned, and (3) the corridor of exhaust gases is laterally spread over more than 1000 km in a day. In contradiction to these arguments, it is maintained here that assumption (1) is inconsistent with the empirical evidence, rendering (2) and (3) insufficient to maintain the claim that no local hole in column ozone could occur. In a reply, ozone image data from the TOMS on Nimbus 7 is used to support the argument of Prather et al.

Aftergood, Steven↗
NASA NTRS1991

Viscous computations of cold air/air flow around scramjet nozzle afterbody

The flow field in and around the nozzle afterbody section of a hypersonic vehicle was computationally simulated. The compressible, Reynolds averaged, Navier Stokes equations were solved by an implicit, finite volume, characteristic based method. The computational grids were adapted to the flow as the solutions were developing in order to improve the accuracy. The exhaust gases were assumed to be cold. The computational results were obtained for the two dimensional longitudinal plane located at the half span of the internal portion of the nozzle for over expanded and under expanded conditions. Another set of results were obtained, where the three dimensional simulations were performed for a half span nozzle. The surface pressures were successfully compared with the data obtained from the wind tunnel tests. The results help in understanding this complex flow field and, in turn, should help the design of the nozzle afterbody section.

Baysal, Oktay↗
NASA NTRS1992

Future space development scenarios: Environmental considerations

The formation of positive attitudes and values concerning the environment of space, as the basis for assuming a wise stewardship role, is becoming increasingly important as many nations begin their journeys into space. A strong emphasis should be placed on fostering an international space environmental ethics. The object of environmental assessment and management in space should be to define what interplanetary regulatory procedures are needed to avoid unnecessary environmental damage and to monitor the effectiveness of such avoidance. The first requirement for research is to narrow the field of concern to areas where there could be an increased scale of development in space in the immediate future. Research needs to be focused on methodologies for defining the environmental systems involved (e.g., the lunar surface) and then recognizing key variables in the system that are fragile and need to be respected. Criteria for environmental quality should emerge which identify, in the case of lunar surface, how much mining activity can be safely undertaken and what quantity of exhaust gases can be released over a given period of time. Only then will humans be most able to evaluate the likely consequences of ventures into space.

Tangum, Richard↗
NASA NTRS1993

Two-, three-, and four-poster jets in cross flow

In connection with the problems of the ingestion of hot exhaust gases in engines of V/STOL and STOVL aircraft in ground effect, a series of studies have been undertaken. Ground impinging, two- and three-poster jets operating in the presence of cross flow were studied. The current paper is divided into two parts. The first part is a comparison of the low speed, two-, three-, and four-poster jet cases, with respect to the flowfield in the region of interaction between the forward and the jet flows. These include cases with mass balanced inlet suction. An analysis of the inlet entry plane of the low speed two- and three-poster jet cases is also given. In the second part, high speed results for a two jet configuration without inlet suction are given. The results are based on quantitative, marker concentration distributions obtained by digitizing video images.

Vukits, Thomas J.↗
NASA NTRS1992

Spectrographic observation at wavelengths near 630 nm of the interaction between the atmosphere and the Space Shuttle exhaust

The interaction between the Space Shuttle exhaust and the ambient atmosphere was studied using spectra in the wavelength region near 630 nm, obtained from the Air Force Maui Optical Station were the temporal, spatial, and spectral distribution of the emission in this region was recorded. The results show that, when the Space Shuttle exhaust gases interact with the atmosphere in the ram direction, an intense long-lasting emission is generated at 630 nm due to O(1D - 3P). A substantial amount of O(1D) is swept back onto the orbiter. Two processes responsible for the formation of O(1D) are proposed.

Broadfoot, A. L.↗