Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXPLOSIVE GAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A survey with Copernicus of interstellar O VI absorption

The presence of broad, shallow absorptions caused by O VI ions were revealed from UV spectra observations recorded by the Copernicus satellite for thirty-two stars. A table lists survey data on the stars observed for which values of the O VI column densities or their upper limits are extracted. Interstellar rather than circumstellar origin is evident from observation of the lack of correspondence between radical velocities of the stars and those of the O VI profiles. The presence of a low-density high-temperature phase of interstellar gas produced by supernova explosions is suggested.

Jenkins, E. B.↗
NASA NTRS1990

A close-up view of Triton

Triton, the only large moon in the solar system with a retrograde motion, is investigated. The moon rotates about Neptune every 5.88 days and its annual cycle lasts 165 years. The orbit of Triton is 355,000 km from Neptune and it is inclined 23 deg relative to Neptune's equator. The precession of its orbital plane causes complications in its seasonal progression. Triton has a radius of 1353 km and a density of 2.07 gm/cu cm. Triton is believed to have a core of rock surrounded by water ice and a surface veneer of methane and nitrogen ice. The bright haze in its atmosphere could be small grains of particulates. Triton's surface features suggest that the moon should have remained molten until about 1 billion years ago. In order to explain the active geyser-like plumes observed near the subsolar latitude of about 50 deg south, various mechanisms are suggested including explosive escape of nitrogen gas, surface winds, and buoyancy of warmer gas. Voyager 2, which left Neptune and Triton in August 1989 and is now moving out of the solar system, is expected to provide the first glimpses of interstellar material.

Tsurutani, Bruce T.↗
NASA NTRS1994

Applications of squeezed states: Bogoliubov transformations and wavelets to the statistical mechanics of water and its bubbles

The squeezed states or Bogoliubov transformations and wavelets are applied to two problems in nonrelativistic statistical mechanics: the dielectric response of liquid water, epsilon(q-vector,w), and the bubble formation in water during insonnification. The wavelets are special phase-space windows which cover the domain and range of L(exp 1) intersection of L(exp 2) of classical causal, finite energy solutions. The multiresolution of discrete wavelets in phase space gives a decomposition into regions of time and scales of frequency thereby allowing the renormalization group to be applied to new systems in addition to the tired 'usual suspects' of the Ising models and lattice gasses. The Bogoliubov transformation: squeeze transformation is applied to the dipolaron collective mode in water and to the gas produced by the explosive cavitation process in bubble formation.

Defacio, Brian↗
NASA NTRS1995

Gas chromatography/ion mobility spectrometry as a hyphenated technique for improved explosives detection and analysis

Ion Mobility Spectrometry (IMS) is currently being successfully applied to the problem of on-line trace detection of plastic and other explosives in airports and other facilities. The methods of sample retrieval primarily consist of batch sampling for particulate residue on a filter card for introduction into the IMS. The sample is desorbed into the IMS using air as the carrier and negative ions of the explosives are detected, some as an adduct with a reagent ion such as Cl(-). Based on studies and tests conducted by different airport authorities, this method seems to work well for low vapor pressure explosives such as RDX and PETN, as well as TNT that are highly adsorptive and can be found in nanogram quantities on contaminated surfaces. Recently, the changing terrorist threat and the adoption of new marking agents for plastic explosives has meant that the sample introduction and analysis capabilities of the IMS must be enhanced in order to keep up with other detector developments. The IMS has sufficient analytical resolution for a few threat compounds but the IMS Plasmogram becomes increasingly more difficult to interpret when the sample mixture gets more complex.

Mercado, AL↗
NASA NTRS2013

Differential Muon Tomography to Continuously Monitor Changes in the Composition of Subsurface Fluids

Muon tomography has been used to seek hidden chambers in Egyptian pyramids and image subsurface features in volcanoes. It seemed likely that it could be used to image injected, supercritical carbon dioxide as it is emplaced in porous geological structures being used for carbon sequestration, and also to check on subsequent leakage. It should work equally well in any other application where there are two fluids of different densities, such as water and oil, or carbon dioxide and heavy oil in oil reservoirs. Continuous monitoring of movement of oil and/or flood fluid during enhanced oil recovery activities for managing injection is important for economic reasons. Checking on leakage for geological carbon storage is essential both for safety and for economic purposes. Current technology (for example, repeat 3D seismic surveys) is expensive and episodic. Muons are generated by high- energy cosmic rays resulting from supernova explosions, and interact with gas molecules in the atmosphere. This innovation has produced a theoretical model of muon attenuation in the thickness of rock above and within a typical sandstone reservoir at a depth of between 1.00 and 1.25 km. Because this first simulation was focused on carbon sequestration, the innovators chose depths sufficient for the pressure there to ensure that the carbon dioxide would be supercritical. This innovation demonstrates for the first time the feasibility of using the natural cosmic-ray muon flux to generate continuous tomographic images of carbon dioxide in a storage site. The muon flux is attenuated to an extent dependent on, amongst other things, the density of the materials through which it passes. The density of supercritical carbon dioxide is only three quarters that of the brine in the reservoir that it displaces. The first realistic simulations indicate that changes as small as 0.4% in the storage site bulk density could be detected (equivalent to 7% of the porosity, in this specific case). The initial muon flux is effectively constant at the surface of the Earth. Sensitivity of the method would be decreased with increasing depth. However, sensitivity can be improved by emplacing a greater array of particle detectors at the base of the reservoir.

Coleman, Max↗
DOE OSTI2024

Description of the Gas Sampling and Circulation System for the LYNM PE1-A Experiment

A series of multiphysics experiments, referred to as Physics Experiment 1 (PE1) is underway at the U.S. Nevada National Security Site. The PE1 series includes detonations of three underground chemical explosions. As the name implies, there are a number of experiments investigating the signals generated by the explosion. The experiment series objectives are outlined in a report from Lawrence Livermore National Laboratory.1 One of the experiments is a gas migration experiment. Gas tracers were imbedded in the explosives and gas sampling boreholes were installed in the formation in the test bed. Connected to the monitoring points is a circulation system that moves gas to a central measurement location. This report does not describe the gas analysis or collection systems, but rather the circulation system that provides the gas for measurement. Here, we have combined four project documents into a single report that describes the design, build, installation, testing, and operation of the gas sampling network.

42 ENGINEERING↗
NASA NTRS1991

Emission processes and dynamics of hot gases in astrophysics

A detailed model was developed for Kepler's supernova remnant (SNR). Observations of the SNR revealed a strong interaction with the surrounding circumstellar medium, which was studied through both analytical and numerical calculations. Effects were studied of electron thermal conduction on the structure of radiative interstellar shock waves. An explanation is sought for the observed line emission from metal rich ejecta in SNR, incorporating atomic data. Light echoes around SN 1987A was also studied. Analysis of infrared and scattered circumstellar light echoes was accomplished with early observations to set limits on the mass of circumstellar dust. Work was completed on the emission from heavy element gas ejected in the supernova explosion of massive stars. It was assumed that a radioactive energy source was present and calculated the detailed heating and ionization of the gas. The evolution was studied of SNR in the very high pressure environment of a starburst galaxy.

Chevalier, Roger A.↗
DOE OSTI2026

A comparison of long-term 37 Ar and 39 Ar transport and implications for 39 Ar as a persistent indicator of underground nuclear explosions

Measurements were first made in 2016 of legacy 39 Ar gas from the decades-old Barnwell underground nuclear explosion site within the Nevada National Security Site. This has raised the question of the ubiquity of the radionuclide 39 Ar following underground nuclear explosions in general locations. This article presents a high-level evaluation of the scientific case for using 39 Ar as a long-term indicator of underground nuclear explosions. Assessment is made based on a broad set of assumptions to reasonably estimate the persistence of 39 Ar in the subsurface environment following an explosion to establish potential detectability years to decades after the originating event.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1999

Sensitized Liquid Hydrazine Detonation Studies

Vapor-phase hydrazine (N2H4) is known to be very sensitive to detonation while liquid hydrazine is very insensitive to detonation, theoretically requiring extremely high pressures to induce initiation. A review of literature on solid and liquid explosives shows that when pure explosive substances are infiltrated with gas cavities, voids, and/or different phase contaminants, the energy or shock pressure necessary to induce detonation can decrease by an order of magnitude. Tests were conducted with liquid hydrazine in a modified card-gap configuration. Sensitization was attempted by bubbling helium gas through and/or suspending ceramic microspheres in the liquid. The hydrazine was subjected to the shock pressure from a 2 lb (0.9 kg) Composition C-4 explosive charge. The hydrazine was contained in a 4 in. (10.2 cm) diameter stainless steel cylinder with a 122 in(sup 3) (2 L) volume and sealed with a polyethylene cap. Blast pressures from the events were recorded by 63 high speed pressure transducers located on three radial legs extending from 4 to 115 ft (1.2 to 35.1 in) from ground zero. Comparison of the neat hydrazine and water baseline tests with the "sensitized" hydrazine tests indicates the liquid hydrazine did not detonate under these conditions.

Rathgeber, K. A.↗
NASA NTRS1975

Application of blast wave theory to explosive propulsion

An analysis was carried out by using blast wave theory to delineate the important aspects of detonating explosives in nozzles, such as flow and wave phenomena, characteristic length and time scales, and the parameters on which the specific impulse is dependent. The propulsive system utilizes the momentum of the ambient gas set into motion in the nozzle by the explosion. A somewhat simplified model was considered for the situation where the mass of ambient gas in the nozzle is much greater than the mass of gas produced in the explosion, a condition of interest for dense atmospheres, e.g., near the surface of Venus. Instantaneous detonation and energy release was presumed to occur at the apex of a conical nozzle, and the shock wave generated by the explosion was taken to propagate as a spherical wave, thereby setting the ambient gas in the nozzle into one-dimensional radially outward motion.

Back, L. H.↗
NASA NTRSDate not supplied

Pre-Flight Hazardous Gas Assessment Methodology for the Space Launch System

The complexity of the Artemis I liquid rocket propulsion systems produces many sources of hazards during the operation of the vehicle. Pre-flight hazardous gas leakages pose fire and explosion risks to rocket that could potentially lead to loss of the vehicle, mission, and crew. The National Aeronautics and Space Administration (NASA) uses a probability risk assessment strategy to assess the likelihood of the hazard and the consequence should the hazardous situation occur. For high probability hazards that pose a potentially catastrophic consequence to the vehicle, the most effective strategy for reducing the risk is accomplished by engineering and implementing systems that actively mitigate the hazard. A hazards analysis is completed to determine the likelihood and severity of each hazard. These hazard analyses are informed using relevant empirical data and physics-based analytical models. Time-accurate Computational Fluid Dynamics models used to quantify and understand the risks posed to Artemis I due to expulsions of hazardous gas near the vehicle. Several sources of hazardous gas that posed a risk to Artemis I during nominal pre-flight operations are analyzed in this work. The results of the analyses were used to develop flight rationale and make risk acceptance decisions for the Artemis I launch.

Brian R. Richardson↗
NASA NTRSDate not supplied

Pre-Flight Hazardous Gas Assessment Methodology for the Space Launch System

The complexity of the Artemis I liquid rocket propulsion systems produces many sources of hazards during the operation of the vehicle. Pre-flight hazardous gas leakages pose fire and explosion risks to rocket that could potentially lead to loss of the vehicle, mission, and crew. The National Aeronautics and Space Administration (NASA) uses a probability risk assessment strategy to assess the likelihood of the hazard and the consequence should the hazardous situation occur. For high probability hazards that pose a potentially catastrophic consequence to the vehicle, the most effective strategy for reducing the risk is accomplished by engineering and implementing systems that actively mitigate the hazard. A hazards analysis is completed to determine the likelihood and severity of each hazard. These hazard analyses are informed using relevant empirical data and physics-based analytical models. Time-accurate Computational Fluid Dynamics models used to quantify and understand the risks posed to Artemis I due to expulsions of hazardous gas near the vehicle. Several sources of hazardous gas that posed a risk to Artemis I during nominal pre-flight operations are analyzed in this work. The results of the analyses were used to develop flight rationale and make risk acceptance decisions for the Artemis I launch.

Brian R. Richardson↗
DOE OSTI2024

Effect of a collapsing gas bubble on the shock-to-detonation transition in liquid nitromethane

We studied the shock-induced collapse of butane gas bubbles in the homogeneous explosive nitromethane (NM) to investigate the effects of hot spot formation on the detonation process. A butane bubble was injected into a sample of NM, and a shock wave from a flat plate impactor compressed the bubble, creating a localized hot spot. We measured shock and detonation wave speeds with optical velocimetry, and we used a high-speed camera to image the shock propagation and bubble collapse processes. A multiband optical fiber pyrometer measured the time-resolved thermal radiance, and we used the results and emissivity values extracted from spectral fits to estimate temperatures. We measured the characteristics of the shock-to-detonation transition in NM with and without a bubble. All experiments were performed at shock pressures near 8 GPa, where neat NM can detonate. A single bubble in this system was shown to sensitize NM, leading to a reduced run-to-detonation time. We used hydrodynamic modeling to predict shock wave propagation, the extent of chemical reaction, and subsequent temperature rise from the collapsing bubble. We used a temperature-dependent Arrhenius burn model for simulations, and it yielded much better results than reactive burn models that depend only on pressure and density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1966

Cryostat modified to aid rotating beam fatigue test

Modified stainless steel Dewar aids rotating beam fatigue test in a cryogenic environment. The Dewar is modified to receive extended specimen supporting members through specially designed rotary seals. The test set can be fully enclosed and pressurized with an inert gas to make the system explosion proof.

Durham, T. F.↗
NASA NTRS1990

Triton's geyser-like plumes - Discovery and basic characterization

One model for the mechanism driving the plumes of the four active geyser-like eruptions observed by Voyager 2 on Triton is a heating up of nitrogen ice in a subsurface greenhouse environment, where nitrogen gas pressurized by solar heating explosively vents to the surface carrying clouds of ice and dark particles into the atmosphere. A temperature increase of less than 4 K above the ambient surface value of 38 + or - 3 K suffices to drive the plumes to 8-km altitude. Each eruption may last a year or more, over the course of which 0.1 cu km of ice is sublimed.

Soderblom, L. A.↗
NASA NTRS1994

Imaging and spectroscopy of ionized shells in M33 and M31

This paper extends an examination of the spectral signature of the interaction of massive stars with the surrounding interstellar medium to the nearby spiral galaxies M33 and M31. H-alpha images and low-dispersion spectra have been obtained for eight giant ionized shell structures in M33 and two in M31. These structures are believed to be the result of the encircled groups of stars blowing holes in the gas through winds and supernova explosions. The emission-line ratios are compared to those of giant and supergiant shells in the Large Magellanic Cloud (LMC). Generally, the shells in M33 and M31 follow the same trend lines outlined by the shells and H II regions in the LMC with the M31 shells being offset to higher metallicity. However, unlike shells in the LMC, the M33 shells have some emission-line ratios that are not particularly distinct from those of H II regions in the same galaxy. Nevertheless, like the shells in the LMC, the emission-line ratios imply that the emission from the shells in M33 and M31 is dominated by photoionization processes. Upper limits to (O I)/H-alpha are consistent with this in most cases.

Hunter, Deidre A.↗