Search NASA⌕ Search

SEARCH · Search NASA

Results for “Eddy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Analysis of subgrid-scale eddy viscosity with use of results from direct numerical simulations

Without resort to any modeling, subgrid-scale eddy viscosity is computed from the results of high-resolution (64 cubed and 128 cubed grid points) direct numerical simulations of three-dimensional homogeneous isotropic decaying turbulence. In these simulations the eddy viscosity peaks sharply at the cutoff wavenumber, in rough agreement with the results of Kraichnan (1976). In addition, in the low-wavenumber range the eddy viscosity may be negative, contrary to the generally accepted concept of subgrid-scale eddy viscosity. Some possible explanations of this behavior are discussed.

Domaradzki, J. Andrzej↗
NASA NTRS1987

The effect of eddy distribution on momentum and heat transfer near the wall in turbulent pipe flow

A study was conducted to determine the effect of eddy distribution on momentum and heat transfer near the wall in turbulent pipe flow. The buffer zone was of particular interest in that it is perhaps the most complicated and least understood region in the turbulent flow field. Six eddy diffusivity relationships are directly compared on their ability to predict mean velocity and temperature distributions in turbulent air flow through a cylindrical, smooth-walled pipe with uniform heat transfer. Turbulent flow theory and the development of the eddy diffusivity relationships are briefly reviewed. Velocity and temperature distributions derived from the eddy diffusivity relationships are compared to experimental data for fully-developed pipe flow in turbulent air at a Prandtl number of 0.73 and Reynolds numbers ranging from 8100 to 25 000.

Zurawski, Robert L.↗
NASA NTRS1987

Latitude dependence of eddy variances

The eddy variance of a meteorological field must tend to zero at high latitudes due solely to the nature of spherical polar coordinates. The zonal averaging operator defines a length scale: the circumference of the latitude circle. When the circumference of the latitude circle is greater than the correlation length of the field, the eddy variance from transient eddies is the result of differences between statistically independent regions. When the circumference is less than the correlation length, the eddy variance is computed from points that are well correlated with each other, and so is reduced. The expansion of a field into zonal Fourier components is also influenced by the use of spherical coordinates. As is well known, a phenomenon of fixed wavelength will have different zonal wavenumbers at different latitudes. Simple analytical examples of these effects are presented along with an observational example from satellite ozone data. It is found that geometrical effects can be important even in middle latitudes.

Bowman, Kenneth P.↗
NASA NTRS1988

The eddy transport of nonconserved trace species derived from satellite data

Using the approach of the Garcia and Solomon (1983) model and data obtained by the LIMS instrument on Nimbus 7, the chemical eddy transport matrix for planetary waves was calculated, and the chemical eddy contribution to the components of the matrix obtained from the LIMS satellite observations was computed using specified photochemical damping time scales. The dominant component of the transport matrices for several winter months were obtained for ozone, nitric acid, and quasi-geostrophic potential vorticity (PV), and the parameterized transports of these were compared with the 'exact' transports, computed directly from the eddy LIMS data. The results indicate that the chemical eddy effect can account for most of the observed ozone transport in early winter, decreasing to less than half in late winter. The agreement between the parameterized and observed nitric acid and PV was not as good. Reasons for this are discussed.

Smith, Anne K.↗
NASA NTRS1989

Technique for temperature compensation of eddy-current proximity probes

Eddy-current proximity probes are used in turbomachinery evaluation testing and operation to measure distances, primarily vibration, deflection, or displacment of shafts, bearings and seals. Measurements of steady-state conditions made with standard eddy-current proximity probes are susceptible to error caused by temperature variations during normal operation of the component under investigation. Errors resulting from temperature effects for the specific probes used in this study were approximately 1.016 x 10 to the -3 mm/deg C over the temperature range of -252 to 100 C. This report examines temperature caused changes on the eddy-current proximity probe measurement system, establishes their origin, and discusses what may be done to minimize their effect on the output signal. In addition, recommendations are made for the installation and operation of the electronic components associated with an eddy-current proximity probe. Several techniques are described that provide active on-line error compensation for over 95 percent of the temperature effects.

Masters, Robert M.↗
NASA NTRS1990

Thin film eddy current impulse deicer

Two new styles of electrical impulse deicers has been developed and tested in NASA's Icing Research Tunnel. With the Eddy Current Repulsion Deicing Boot (EDB), a thin and flexible spiral coil is encapsulated between two thicknesses of elastomer. The coil, made by an industrial printed circuit board manufacturer, is bonded to the aluminum aircraft leading edge. A capacitor bank is discharged through the coil. Induced eddy currents repel the coil from the aluminum aircraft structure and shed accumulated ice. A second configuration, the Eddy Current Repulsion Deicing-Strip (EDS) uses an outer metal erosion strip fastened over the coil. Opposite flowing eddy currents repel the strip and create the impulse deicing force. The outer strip serves as a surface for the collection and shedding of ice and does not require any structural properties. The EDS is suitable for composite aircraft structures. Both systems successfully dispelled over 95 percent of the accumulated ice from airfoils over the range of the FAA icing envelope.

Smith, Samuel O.↗
NASA NTRS1990

Parameterization of eddy sensible heat transports in a zonally averaged dynamic model of the atmosphere

A Charney-Branscome based parameterization has been tested as a way of representing the eddy sensible heat transports missing in a zonally averaged dynamic model (ZADM) of the atmosphere. The ZADM used is a zonally averaged version of a general circulation model (GCM). The parameterized transports in the ZADM are gaged against the corresponding fluxes explicitly simulated in the GCM, using the same zonally averaged boundary conditions in both models. The Charney-Branscome approach neglects stationary eddies and transient barotropic disturbances and relies on a set of simplifying assumptions, including the linear appoximation, to describe growing transient baroclinic eddies. Nevertheless, fairly satisfactory results are obtained when the parameterization is performed interactively with the model. Compared with noninteractive tests, a very efficient restoring feedback effect between the modeled zonal-mean climate and the parameterized meridional eddy transport is identified.

Genthon, Christophe↗
NASA NTRS1990

Validation of parameterization scheme for eddy diffusion from satellite data

The eddy diffusion coefficient K(yy) has been calculated usign LIMS for the months of December 1978 and January and February 1979. Two methods have been used. The first implements the suggestion made by Tung (1987) to parameterize the eddy transport as a diffusive process along isentropes. The second method integrates the equation relating the parcel displacements to the eddy velocity fields. The latter method uses a filtering on both space and time domains to isolate transients and is referred to as the 'spectral method'. Results from the first method are shown to be reliable only for quiescent periods, breaking down when the meridional gradient of potential vorticity is negligible. Results from the two methods are in agreement only for very disturbed conditions, when transience is readily isolated. It is concluded that the parameterizations suggested for eddy transport and calculated in this paper may be meaningful for quiet periods, but are not reliable for unsteady and very large amplitude disturbances.

Sassi, F.↗
NASA NTRS1990

A dynamic subgrid-scale eddy viscosity model

One major drawback of the eddy viscosity subgrid-scale stress models used in large-eddy simulations is their inability to represent correctly with a single universal constant different turbulent field in rotating or sheared flows, near solid walls, or in transitional regimes. In the present work, a new eddy viscosity model is presented which alleviates many of these drawbacks. The model coefficient is computed dynamically as the calculation progresses rather than input a priori. The model is based on an algebraic identity (Germano 1990) between the subgrid-scale stresses at two different filtered levels and the resolved turbulent stresses. The subgrid-scale stresses obtained using the proposed model vanish in laminar flow and at a solid boundary, and have the correct asymptotic behavior in the near-wall region of a turbulent boundary layer. The results of large-eddy simulations of transitional and turbulent channel flow that use the proposed model are in good agreement with the direct simulation data.

Germano, Massimo↗
NASA NTRS1993

Low-frequency synoptic-eddy activity in the Pacific storm track

The GCM presently used to examine the nature of LF variations in synoptic-eddy activity over the North Pacific, when compared with observations, yields realistic time-mean and LF synoptic-eddy forcing of the 200-mb zonal wind. In the time mean, this forcing exhibits an east-west dipole structure that is consistent with the general view of the life cycle of baroclinic waves; these show marked upward and eastward propagation in the western and central Pacific, as well as meridional propagation to the east. Composites of the hemispheric distribution of synoptic-eddy forcing in the GCM, based on the extremes of the dominant Pacific empirical orthogonal function, show a seesaw behavior with enhanced eddy forcing in the North Pacific basin which is associated with suppressed forcing in the North Atlantic basin (and vice versa).

Higgins, R. W.↗
NASA NTRS1991

Interactions between synoptic-scale eddies and the large-scale flow during the development of blocking over the North Atlantic Ocean

Earlier studies of blocking are extended by examining the interactions that occur between the synoptic-scale eddies and the large-scale flow during the development of wintertime blocking events over the North Atlantic Ocean. In particular, attention is given to the change of synoptic-scale eddy activity during the development of blocking and to the role of anomalous forcing by synoptic-scale eddies in the development of large-scale flow anomalies. The dynamical mechanisms accounting for the observed variations in eddy activity are identified.

Neilley, Peter P.↗
NASA NTRS1993

Toward large eddy simulation of turbulent flow over an airfoil

The flow field over an airfoil contains several distinct flow characteristics, e.g. laminar, transitional, turbulent boundary layer flow, flow separation, unstable free shear layers, and a wake. This diversity of flow regimes taxes the presently available Reynolds averaged turbulence models. Such models are generally tuned to predict a particular flow regime, and adjustments are necessary for the prediction of a different flow regime. Similar difficulties are likely to emerge when the large eddy simulation technique is applied with the widely used Smagorinsky model. This model has not been successful in correctly representing different turbulent flow fields with a single universal constant and has an incorrect near-wall behavior. Germano et al. (1991) and Ghosal, Lund & Moin have developed a new subgrid-scale model, the dynamic model, which is very promising in alleviating many of the persistent inadequacies of the Smagorinsky model: the model coefficient is computed dynamically as the calculation progresses rather than input a priori. The model has been remarkably successful in prediction of several turbulent and transitional flows. We plan to simulate turbulent flow over a '2D' airfoil using the large eddy simulation technique. Our primary objective is to assess the performance of the newly developed dynamic subgrid-scale model for computation of complex flows about aircraft components and to compare the results with those obtained using the Reynolds average approach and experiments. The present computation represents the first application of large eddy simulation to a flow of aeronautical interest and a key demonstration of the capabilities of the large eddy simulation technique.

Choi, Haecheon↗
NASA NTRS1992

Lumley's PODT definition of large eddies and a trio of numerical procedures

Lumley's 1967 Moscow paper provided, for the first time, a completely rational definition of the physically-useful term 'large eddy', popular for a half-century. The numerical procedures based upon his results are: (1) PODT (Proper Orthogonal Decomposition Theorem), which extracts the Large Eddy structure of stochastic processes from physical or computer simulation two-point covariances, and 2) LEIM (Large-Eddy Interaction Model), a predictive scheme for the dynamical large eddies based upon higher order turbulence modeling. Earlier Lumley's work (1964) forms the basis for the final member of the triad of numerical procedures: this predicts the global neutral modes of turbulence which have surprising agreement with both structural eigenmodes and those obtained from the dynamical equations. The ultimate goal of improved engineering design tools for turbulence may be near at hand, partly due to the power and storage of 'supermicrocomputer' workstations finally becoming adequate for the demanding numerics of these procedures.

Payne, Fred R.↗
NASA NTRS1994

A numerical analysis of shipboard and coastal zone color scanner time series of new production within Gulf Stream cyclonic eddies in the South Atlantic Bight

Eddy-induced upwelling occurs along the western edge of the Gulf Stream between Cape Canaveral, Florida, and Cape Hatteras, North Carolina, in the South Atlantic Bight (SAB). Coastal zone color scanner images of 1-km resolution spanning the period April 13-21, 1979, were processed to examine these eddy features in relation to concurrent shipboard and current/temperature measurements at moored arrays. A quasi-one-dimensional (z), time dependent biological model, using only nitrate as a nutrient source, has been combined with a three-dimensional physical model in an attempt to replicate the observed phytoplankton field at the northward edge of an eddy. The model is applicable only to the SAB south of the Charleston Bump, at approximately 31.5 deg N, since no feature analogous to the bump exists in the model bathymetry. The modeled chlorophyll, nitrate, and primary production fields of the euphotic zone are very similar to those obtained from the satellite and shipboard data at the leading edges of the observed eddies south of the Charleston Bump. The horizontal and vertical simulated fluxes of nitrate and chlorophyll show that only approximately 10% of the upwelled nitrate is utilized by the phytoplankton of the modeled grid box on the northern edge of the cyclone, while approximately 75% is lost horizontally, with the remainder still in the euphotic zone after the 10-day period of the model. Loss of chlorophyll due to sinking is very small in this strong upwelling region of the cyclone. The model is relatively insensitive to variations in the sinking parameterization and the external nitrate and chlorophyll fields but is very sensitive to a reduction of the maximum potential growth rate to half that measured. Given the success of this model in simulating the new production of the selcted upwelling region, other upwelling regions for which measurements or successful models of physical and biological quantities and rates exist could be modeled similarly.

Pribble, J. Raymond↗
NASA NTRS1994

Simulated life cycles of persistent anticyclonic anomalies over the North Pacific: Role of synoptic-scale eddies

This study examines the role of synoptic-scale eddies during the development of persistent anticyclonic height anomalies over the central North Pacific in a general circulation model under perpetual January conditions. The General Circulation Model (GCM) replicates the basic characteristics of the evolution of the anomaly patterns found in observations. The life cycle is characterized by the rapid establishment of the major anomaly center and considerably longer maintenance and decay phases, which include the development of downstream anomaly centers. The simulation also shows a realistic evolution of synoptic-scale activity beginning with enhanced activity off the east coast of Asia prior to onset, followed by a northward shift of the Pacific storm track, which lasts throughout the maintenance phase. The initial enhancement of synoptic-scale eddy activity is associated with a large-scale cyclonic anomaly that developes over Siberia several days prior to the onset of the main anticyclonic anomaly over the central North Pacific. The observations, however, show considerable interdecadel variability in the details of the composite onset behavior; it is unclear whether this variability is real or whether it reflects differences in the data assimilation systems. The role of the time mean flow and synoptic-scale eddies in the development of the persistent Pacific anomalies is studied within the context of a kinetic energy budget in which the flow is decomposed into the time-mean, low-frequency (timescales longer than 10 days), and synoptic (timescales less than 6 days) components. The budget, which is carried out for the simulation at 500 mb, shows that the initial growth of the persistent anticyclonic anomalies is associated with barotropic conversions of energy, with approximately equal contributions coming from the mean flow and the synoptic-scale eddies. After onset the barotropic conversion from the mean flow dominates, whereas the decay phase is associated with baroclinic processes within the low-frequency flow.

Higgins, R. W.↗
NASA NTRS1995

Solar wind eddies and the heliospheric current sheet

Ulysses has collected data between 1 and 5 AU during, and just following solar maximum, when the heliospheric current sheet (HCS) can be thought of as reaching its maximum tilt and being subject to the maximum amount of turbulence in the solar wind. The Ulysses solar wind plasma instrument measures the vector velocity and can be used to estimate the flow speed and direction in turbulent 'eddies' in the solar wind that are a fraction of an astronomical unit in size and last (have either a turnover or dynamical interaction time of) several hours to more than a day. Here, in a simple exercise, these solar wind eddies at the HCS are characterized using Ulysses data. This character is then used to define a model flow field with eddies that is imposed on an ideal HCS to estimate how the HCS will be deformed by the flow. This model inherently results in the complexity of the HCS increasing with heliocentric distance, but the result is a measure of the degree to which the observed change in complexity is a measure of the importance of solar wind flows in deforming the HCS. By comparison with randomly selected intervals not located on the HCS, it appears that eddies on the HCS are similar to those elsewhere at this time during the solar cycle, as is the resultant deformation of the interplanetary magnetic field (IMF). The IMF deformation is analogous to what is often termed the 'random walk' of interplanetary magnetic field lines.

Suess, S. T.↗
NASA NTRS1996

Size Segregation and Number Density Enhancement of Particles in Accretion Disk Eddies

We investigate the conditions for trapping solid dust particles in eddies and discuss the behavior of particles in a non-laminar protoplanetary accretion disk. We considered particle sizes from small dust grains to larger objects, 10(exp -4) cm less than a(sub p) less than 10(exp 2) cm. Independent of the source of turbulence, one can expect eddies to exist in the gas flow of a accretion disk, in the form of randomly occurring turbulent features or as convective cells. Due to the centrifugal force, solid particles are driven out of an eddy. It will be shown that this process is inhibited by the gravitational force induced by the protostar. Because of the mass dependence of the friction time, a given eddy becomes a trap for particles of a characteristic size and causes a local change in the dust density. Thus, the size distribution of the grains is no longer spatially homogeneous on small scales. Our general estimates do not depend on special turbulence or convection models. We calculate the maximal inhomogeneity due to this process. The strongest effect was observed for mm-sized particles, which can be concentrated by a factor of 100 within only 100 years.

Klahr, H. H.↗
NASA NTRS1999

Evaluation of the Self-Nulling Rotating Eddy Current Probe System

In order to detect multi-site fatigue cracks located under flush-head rivets, automated eddy current equipment is required. To assure a reliable system, the eddy current probe must be centered easily over the installed rivets. To meet these requirements, the NDE Group at NASA LaRC developed the Self-Nulling Rotating Eddy Current Probe System (SNRECPS) which will be referred to as RPS in this document. The system was evaluated at the FAA, NDI Validation Center, in Albuquerque, New Mexico. The system was capable of detecting a 0.032 inch long crack with a 90/95% PoD. Further evaluations were conducted at Boeing in Long Beach, California. These evaluations included fatigue cracks and notches in a range from 0.025 to 0.100 inch long under flush-head aluminum rivets, and titanium or steel flush-head fasteners. The results of these tests are reported herein. Subsequently, the system was loaned to the USAF Structures Laboratory for the purpose of detecting and measuring short cracks under flush-head rivets in a variety of fatigue test specimens. The inspection task was to detect and plot crack growth from numbered fasteners in lettered rows. In January, 1998, the system was taken to Northwest Airlines Maintenance Base, in Atlanta, to inspect a DC-9, for multi-site cracks in three circumferential splices. The aircraft had 83,000 cycles. The inspection was conducted at 30 kHz from longeron 5 left to longeron 5 right. The system was calibrated using a 0,030 EDM first layer notch. The instrument gain was set to 19 mV from the notch. The reject level was set at 10 mV and the unflawed fasteners yielded a signal amplitude of 2 to 3 mV. Only one fastener location, out of about 2,500 tested, yielded a signal of 58 mV. The rivet was removed and visually evaluated. It appeared to be a slight gouge in the counter-sink zone. No fatigue cracks were detected. The same fastener locations were also inspected using the Boeing MAUS system at 60 kHz. No cracks were detected. Thus far, the rotating probe eddy current system has been found to be very user friendly and capable of detecting first layer cracks on the order of 0.030 inch long or longer.

Hagemaier, Don↗