Design of Cr-Based Molecular Electrocatalyst Systems for the CO 2 Reduction Reaction
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “Electrocatalyst”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unraveling Reactivity Origin of Oxygen Reduction at High-Entropy Alloy Electrocatalysts with a Computational and Data-Driven Approach
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Evaluating Ru-RuO 2 @BN as a Bifunctional Electrocatalyst for the Nitrogen Reduction Reaction and the Hydrogen Evolution Reaction
Electrochemical approaches toward clean energy production have been the focus of significant attention. Here, the nitrogen (N 2 ) reduction reaction (NRR) and the hydrogen (H 2 ) evolution reaction (HER) offer a promising method for producing NH 3 and H 2 , respectively. Nevertheless, practical obstacles that must be overcome in creating optimal catalysts are the sluggish kinetics and low selectivity of NRR and HER. Herein, we report on the synthesis of a Ru-RuO 2 -decorated boron nitride (BN) catalyst that shows excellent activity toward NRR. A rate of NH3 formation (V NH3 ) of 16.8 μg h -1 mg -1 and a corresponding Faradaic efficiency (FE) of 52.9% were noted at a potential of −0.5 V in 0.1 M HCl. However, the HER activity of Ru-RuO 2 @BN was found to be highly suppressed in 0.1 M HCl and did not yield a reasonable overpotential value. Thus, the capability of this material toward NRR suggests its viability as a promising catalyst for clean NH 3 production.
30 DIRECT ENERGY CONVERSION↗
Condensed Layer Deposition of Nanoscopic TiO 2 Overlayers on High-Surface-Area Electrocatalysts
Not provided.
Materials Science↗
Electrolyte–Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO 2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM
Integrating CO 2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO 2 regeneration in traditional CO 2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO 2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO 2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst–electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO 2 reduction (CO 2 R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO 3 salt, as well as CO 2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO 2 captured impact the nearelectrode environment, which has implications for CO 2 R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.
36 MATERIALS SCIENCE↗
In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy
Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).
36 MATERIALS SCIENCE↗
Nanocluster Active Sites Formed on Heterogeneous Thermal Catalysts and Electrocatalysts by Operando Reactive Environments
Here, in this Viewpoint, we summarize our recent studies in this endeavor, ending with a forward-looking perspective into the remaining challenges and open questions for consideration by the catalysis community. Through a computationally efficient framework of systematically investigating metal atom ejection from and migration onto metal surfaces, leading to the formation of metal atom clusters, we show that the surface of a metal catalyst is dynamic and much less rigid than previously thought. We suggest that the operando formed metal atom clusters are novel active sites, which can dominate the activity of steps or kinks (let aside terraces) from where their constituent atoms were ejected. Through more readily responding to reaction conditions by forming catalytically active clusters, solid metal catalysts approach not only homogeneous catalyst motifs, thus establishing a bridge between homogeneous and heterogeneous catalysis, but also liquid metals which have been suggested to be better than traditional heterogeneous catalysts.
adsorption↗
Composition, Activity, and Stability of IrO x Oxygen Evolution Reaction Electrocatalysts
The oxygen evolution reaction (OER) is integral to several electrochemical energy conversion and storage technologies, including carbon dioxide reduction to value added fuels, nitrogen reduction to ammonia, reversible fuel cells, rechargeable metal−air batteries, and water electrolysis to produce hydrogen. Iridium oxide (IrO x ) is widely recognized as the benchmark OER catalyst for acidic environments. Despite widespread use of IrO x catalysts, most notably in proton-exchange membrane water electrolyzers (PEMWEs), a comprehensive understanding of the physicochemical properties of commercial catalysts and the impact of these properties on both the activity and stability of these catalysts is lacking. Here, we study commercial IrO x catalysts with different physicochemical properties, three nominally considered amorphous and three rutile, to elucidate how structural and compositional variations affect OER activity and stability. Utilizing standardized aqueous electrochemical protocols, time-resolved dissolution quantification using inductively-coupled plasma mass spectrometry, and physicochemical characterization, including multiple synchrotron X-ray techniques, we systematically correlate catalyst properties with OER performance and degradation behavior aided by principal component analysis (PCA). Our results demonstrate the general trend of amorphous IrO x having higher intrinsic activity but limited stability and crystalline rutile IrO 2 having lower activity but enhanced stability against dissolution. The trends within the amorphous and rutile catalyst groups correlate with inherent material properties, including phase composition and structure, crystallinity, particle size, surface area, and surface structure/chemistry. Notably, we identify a rutile catalyst with the largest crystallite/ domain sizes, moderate surface area, a small fraction of hydrous phase, and a favorable pore structure (trimodal distributions of pore sizes ranging from 2−5 nm) that exhibits the best balance between activity and stability among the six catalysts studied here. These findings illustrate a fundamental structure-governed trade-off between activity and stability and highlight the critical role of surface chemistry modification and structure engineering in IrO x catalyst optimization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Controlled Acidity Gradients Enable CO 2 Reduction to Formic Acid (Not Formate) by Molecular Electrocatalysts
Neutral or basic conditions are commonly required for the selective electrochemical reduction of CO 2 , leading to the accumulation of carbonate salts and the generation of formate rather than formic acid. A generalizable strategy for obtaining formic acid (not formate) in the electroreduction of CO 2 with molecular catalysts is introduced, based on controlling acidity gradients using a dual-electrolyte cell with a proton-exchange membrane. This approach uses anodic water oxidation as the source of protons and electrons for CO 2 reduction to formic acid, while mitigating H 2 evolution near the cathode and avoiding carbonate formation. Mechanistic studies, including systems modeling, provide insight into the origin of the formic acid selectivity and guide the broader implementation of this strategy in molecular electrocatalysis for CO 2 utilization.
Alcohols↗
Translating Fundamental Insights into Ag-Based Bimetallic Electrocatalysts to Anion-Exchange Membrane Fuel Cells
To address challenges of high costs and scalability for fuel cells, it is essential to develop af-fordable and earth-abundant materials that are Pt-group-metal (PGM)-free. Recent advance-ments in PGM-free electrocatalysis for the oxygen reduction reaction (ORR) in alkaline media show that high catalyst loadings are needed to achieve high reaction rates; however, there are associated mass transport limitations. To address this issue, we develop low-loading ionomer-less Ag-bimetallic thin films by alloying with 3d block elements or Sn. We bridge knowledge from fundamental rotating disk electrode (RDE) studies to gas-diffusion cathodes in high-temperature anion-exchange membrane fuel cells (HT-AEMFCs), resulting in high-activity ORR catalysis and peak power densities up to 1.2 W cm-² geo for the Ag-Sn and Ag-Co alloys. Here, experimental post-characterization and theoretical calculations reveal small Co or Sn oxide nano-islands on Ag as likely active sites enhancing ORR activity, ultimately offering these low-loading PGM-free ORR materials as a viable path towards sustainable energy conversion.
Catalysts↗
Toward Spatial Control of Reaction Selectivity on Photocatalysts Using Area-Selective Atomic Layer Deposition on the Model Dual Site Electrocatalyst Platform
Photocatalytic water splitting is a promising route to low-cost, green H 2 . However, this approach is currently limited in its solar-to-hydrogen conversion efficiency. One major source of efficiency loss is attributed to the high rates of undesired side and back reactions, which are exacerbated by the proximity of neighboring oxidation and reduction sites. Nanoscopic oxide coatings have previously been used to selectively block undesired reactants from reaching active sites; however, a coating encapsulating the entire photocatalyst particle limits activity as it cannot facilitate both half-reactions. In this work, area selective atomic layer deposition (AS-ALD) was used to selectively deposit semipermeable TiO 2 films onto model metallic cocatalysts for enhancing reaction selectivity while maintaining a high overall activity. Pt and Au were used as exemplary reduction and oxidation cocatalyst sites, respectively, where Au was deactivated toward ALD growth through self-assembled thiol monolayers while TiO 2 was coated onto Pt sites. Electroanalytical measurements of monometallic thin film electrodes showed that the TiO 2 -encapsulated Pt effectively suppressed undesired H 2 oxidation and Fe(II)/Fe(III) redox reactions while still permitting the desired hydrogen evolution reaction (HER). A planar model photocatalyst platform containing patterned interdigitated arrays of Au and Pt microelectrodes was further assessed using scanning electrochemical microscopy (SECM), demonstrating the successful use of AS-ALD to enable local reaction selectivity in a dual-reaction-site (photo)electrocatalytic system. Finally, interdigitated microelectrodes having independent potential control were used to show that selectively deposited TiO 2 coatings can suppress the rate of back reactions on neighboring active sites by an order of magnitude compared with uncoated control samples.
08 HYDROGEN↗
Dynamic Bubbling Balanced Proactive CO 2 Capture and Reduction on a Triple-Phase Interface Nanoporous Electrocatalyst
The formation and preservation of the active phase of the catalysts at the triple-phase interface during CO 2 capture and reduction is essential for improving the conversion efficiency of CO 2 electroreduction toward value-added chemicals and fuels under operational conditions. Designing such ideal catalysts that can mitigate parasitic hydrogen generation and prevent active phase degradation during the CO 2 reduction reaction (CO 2 RR), however, remains a significant challenge. Herein, we developed an interfacial engineering strategy to build a new SnO x catalyst by invoking multiscale approaches. This catalyst features a hierarchically nanoporous structure coated with an organic F-monolayer that modifies the triple-phase interface in aqueous electrolytes, substantially reducing competing hydrogen generation (less than 5%) and enhancing CO 2 RR selectivity (~90%). This rationally designed triple-phase interface overcomes the issue of limited CO 2 solubility in aqueous electrolytes via proactive CO 2 capture and reduction. Concurrently, we utilized pulsed square-wave potentials to dynamically recover the active phase for the CO 2 RR to regulate the production of C1 products such as formate and carbon monoxide (CO). This protocol ensures profoundly enhanced CO 2 RR selectivity (~90%) compared with constant potential (~70%) applied at -0.8 V (V vs RHE). We further achieved a mechanistic understanding of the CO 2 capture and reduction processes under pulsed square-wave potentials via in situ Raman spectroscopy, thereby observing the potential-dependent intensity of Raman vibrational modes of the active phase and CO 2 RR intermediates. Finally, this work will inspire material design strategies by leveraging triple-phase interface engineering for emerging electrochemical processes, as technology moves toward electrification and decarbonization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fast Catalysis at Low Overpotential: Designing Efficient Dicationic Re(bpy 2+ )(CO) 3 I Electrocatalysts for CO 2 Reduction
Here we report a series of isomeric, dicationic Re(bpy 2+ )(CO) 3 I com-plexes with bpy (2,2'-bipyridine) modified by two phenyl-CH 2 -(NMe 3 )+ pendants with cations located at variable distances from the active site for electrocatalytic CO 2 reduction in CH 3 CN/2.8 M H 2 O. The position of the cationic groups dramatically increases the rate of catalysis by 800-fold, from 1.2 to 950 s -1 , with a minor increase in overpotential. Acceleration is due to stabilization of the initial CO 2 adduct and lowering of ΔG ‡ for C-OH bond cleavage by Coulombic stabilization of anionic charges. Performance may be enhanced by accumulation in the electrochemical double layer. Transition state stabilization in the optimized isomer unlocks the low overpotential "protonation-first" pathway, highlighting the sizable effects of subtle structural optimization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Atomic Ordering-Induced Ensemble Variation in Alloys Governs Electrocatalyst On/Off States
The catalytic behavior of a material is influenced by ensembles—the geometric configuration of atoms. Traditional approaches, mainly utilizing solid-solution alloys in electrocatalysis, have often overlooked the challenges posed by concurrent changes in the electronic structure (i.e. d-band center) when the composition is altered. Here, this study introduces a methodology that distinctly separates the geometric effects (i.e. ensembles) from the electronic structure. We compare the reactivity of compositionally identical, but structurally different Pd 3 Bi ordered intermetallic and solid-solution alloys. Remarkably, we find that Pd 3 Bi intermetallics display nearly no reactivity for the methanol oxidation (MOR), while their solid-solution counterparts have significant reactivity. This highlights a unique case where materials with identical chemical compositions demonstrate drastically different catalytic behavior underscoring the critical importance of ensembles in electrocatalysis. Specifically, Pd 3 Bi intermetallics form smaller ensembles (average coordination number: 4.5 ± 1.6) with almost no measurable MOR activity at room temperature, in contrast to the solid-solution Pd 3 Bi that exhibit larger ensembles (average coordination number: 6.8 ± 0.9) and considerable MOR reactivity (0.5 mA cm −2 Pd ). An ordered Pd 3 Bi alloy, with an intermediate ensemble size (average coordination number: 5.3 ± 1.2), displays moderate MOR activity (0.1 mA cm −2 Pd ), further confirming the direct correlation between ensemble size and catalytic activity. Notably, all Pd 3 Bi alloys maintain similar electronic structures, because the chemical composition of the alloys is fixed, indicating that the differences in reactivity are predominantly from changes to the ensemble size. Our findings offer an approach for precisely controlling catalytic activity through manipulating the geometric configuration of the atoms within an alloy, paving the way for more efficient catalyst design.
alloys↗
Multimodal In Situ Characterization Uncovers Unexpected Stability of a Cobalt Electrocatalyst for Acidic Sustainable Energy Technologies
An accelerated development of durable and affordable sustainable energy technologies is often hindered by a limited understanding of how non-precious materials within these systems degrade. In acidic proton exchange membrane fuel cells and water electrolyzers, metallic cobalt (Co) is considered an unstable component that is often combined with precious metals or other stabilizers. To understand the mechanisms behind Co instability, we employ an experimental platform that quantifies dissolution with on-line inductively coupled plasma mass spectrometry and product formation with electrochemical mass spectrometry during electrochemical testing, along with ex- situ characterization. Under varied conditions (electrocatalysis, time, gas-type saturation, and ion concentration), windows of Co stability are observed that are different than predicted with classical chemical thermodynamics, suggesting new stabilization and degradation mechanisms than previously understood. Notably, Co is active for the hydrogen evolution reaction (HER), with prolonged stability that is ~300 mV different than thermodynamically projected. Additionally, in an oxygenated environment, Co concurrently performs the HER and oxygen reduction reaction (ORR) yet undergoes different morphology changes and dissolution mechanisms. Interestingly, in the absence of electrocatalysis, there is a 22x decrease in dissolution in an oxygen-free environment, proposing a route to decrease Co losses during device shutdown protocols. Lastly, under more extreme operating conditions, Co becomes stable after a substantial amount of dissolution, suggesting that high concentrations of Co 2+ ions in the microenvironment induce the formation of a stable CoHO 2 surface. Altogether, these results can be leveraged to improve the design and development of more robust and cost-effective sustainable energy technologies, as well as promote strategic strategies for prolonged material utilization.
Dissolution↗
Polymer Binder Blends Stabilize Alkaline Hydrogen Evolution by Heterogenized Molecular Phen-Based Cobalt Electrocatalysts through Coordination and Environmental Control
Not Available
Johnson, Elizabeth K. (ORCID:0009000312169110)↗
Integrated CO 2 Capture and Conversion to Formate with a Molecular Platinum Bis(diphosphine) Electrocatalyst
Carbon dioxide is a potentially valuable feedstock for carbon-based fuels or commodities but is only available in dilute streams. Many studies have focused on either the capture and concentration of CO 2 or the reduction of pure CO 2 streams. The direct reduction of sorbent-captured CO 2 in an integrated process would skip the energy-intensive CO 2 concentration and sorbent regeneration step. Herein, we report the electrocatalytic reduction of 1,3-bis(2,6-diisopropylphenyl)imidazolium-2-carboxylate (IPr·CO 2 ), which forms quantitatively from the reaction of sorbent 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr) with 10% and 0.04% CO 2 streams, by catalyst [Pt(dmpe) 2 ](PF 6 ) 2 (dmpe = 1,2-bis(dimethylphosphino)ethane) to formate with >70% Faradaic efficiencies. Unexpectedly, experimental studies indicate that the proton source phenol facilitates rapid decarboxylation of IPr·CO 2 to release CO 2 , which is the substrate for reduction. Kinetic studies determined the rate of hydride transfer from a catalytic intermediate [HPt(dmpe) 2 ](PF 6 ) to form the C–H bond in formate to be 0.22 M –1 s –1 . Further details on the mechanism, transition state energy, and structure for hydride transfer to CO 2 , a common step in CO 2 reduction, were explored using computational methods.
Chemistry↗