Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Insulator Surface Charge as a Function of Pressure: Theory and Simulation

A two-phase equilibrium model was developed to explain the discontinuous surface charge decay versus atmospheric pressure of insulators that had been charged triboelectrically. The two-phase model is an electrostatic form of the Langmuir Isotherm for ions adsorbed on a surface in equilibrium with ions in the gas phase. In this paper, the model was extended to account for vibrational states of the adsorbed surface ions via the vibrational partition function. An analysis is performed that rules out Paschen discharge as the cause of the discharge observed. Also, a numerical simulation is performed using NWChem to calculate the adsorption energies of ions on insulator surfaces for comparison to curve fit adsorption energies developed from the model and experimental data.

Hogue, Michael D.↗

Sharks Associated With A Large Sand Shoal Complex: Community Insights From Longline and Acoustic Telemetry Surveys

Offshore sand shoals are a coveted sand source for coastal restoration projects and as sites for wind energy development. Shoals often support unique fish assemblages but their habitat value to sharks is largely unknown due to the high mobility of most species in the open ocean. This study pairs multi-year longline and acoustic telemetry surveys to reveal depth-related and seasonal patterns in a shark community associated with the largest sand shoal complex in east Florida, USA. Monthly longline sampling from 2012–2017 yielded 2,595 sharks from 16 species with Atlantic sharpnose (Rhizoprionodon terraenovae), blacknose (Carcharhinus acronotus), and blacktip (C. limbatus) sharks being the most abundant species. A contemporaneous acoustic telemetry array detected 567 sharks from 16 species (14 in common with longlines) tagged locally and by researchers elsewhere along the US East Coast and Bahamas. PERMANOVA modeling of both datasets indicate that the shark species assemblage differed more across seasons than water depth although both factors were important. Moreover, the shark assemblage detected at an active sand dredge site was similar to that at nearby undisturbed sites. Water temperature, water clarity, and distance from shore were habitat factors that most strongly correlated to community composition. Both sampling approaches documented similar single-species and community trends but longlines underestimated the shark nursery value of the region while telemetry-based community assessments are inherently biased by the number of species under active study. Overall, this study confirms that sharks can be an important component of sand shoal fish communities but suggests that deeper water immediately adjacent to shoals (as opposed to shallow shoal ridges) is more valuable to some species. Potential impacts to these nearby habitats should be considered when planning for sand extraction and offshore wind infrastructure.

Shark Management↗

A Stability Analysis of Cylindrical Panels Using a Finite Element Formulation

A cylindrical finite element suitable for the linear stability analysis of cylindrical shells is developed. Energy principles and variational methods lead to a problem formulation which lends itself to physical interpretations of the governing matrices of the finite element. By properly grouping the terms which result from taking the second variation of the potential energy of the element, it is possible to identify three distinct types of matrices. The first matrix is the conventional stiffness matrix; the second is an initial stress stiffness matrix; and the third is an initial displacement stiffness matrix. With the assumption of linearity, the buckling problem is stated in terms of the classical linear real eigenvalue equation. This problem formulation was programmed on the CDC 6600 series computer. The computer program is used to analyze the buckling of a variety of structures. Columns, arches, flat plates and curved panels with and without cutouts are considered.

Snyder, R. E.↗

Application of electrochemical energy storage in solar thermal electric generation systems

This paper assesses the status, cost, and performance of existing electrochemical energy storage systems, and projects the cost, performance, and availability of advanced storage systems for application in terrestrial solar thermal electric generation. A 10 MWe solar plant with five hours of storage is considered and the cost of delivered energy is computed for sixteen different storage systems. The results indicate that the five most attractive electrochemical storage systems use the following battery types: zinc-bromine (Exxon), iron-chromium redox (NASA/Lewis Research Center, LeRC), sodium-sulfur (Ford), sodium-sulfur (Dow), and zinc-chlorine (Energy Development Associates, EDA).

Das, R.↗

NASA technology transfer in the southwest states - Arizona, Colorado, Nevada and Utah

Features of the NASA Regional Application Program for providing state and local land management agencies an opportunity to assess the usefulness of emerging remote sensing technology are described. The Program guidelines necessitated configuring software for local facilities, assuring that the aggncy involved furnished manpower, and applying the technology to local needs. The study focused on the southwestern U.S., particularly for purposes of water management, federal/state ownership/policy, energy development, environmental impact issues, timber and range inventory, fire control, and urban expansion. Demonstration projects were conducted in various topics, according to the state surveyed, with the success of the projects determined by the willingness of the agencies to continue with the technology, which happened in several cases.

Norman, S. D.↗

Pulsars as cosmic ray particle accelerators: Dynamics of electrons

The Lorentz-Dirac-equation with Landau approximation has been solved numerically for electrons in the electromagnetic field of a magnetic dipole rotating with the angular velocity omega perpendicular to its magnetic moment mu. Results are discussed with respect to electron orbits and energy development.

Thielheim, K. O.↗

Numerical weather prediction in low latitudes

Based on the results of a number of numerical prediction experiments, the differential heating between land and ocean is an important and critical factor for investigation of phenomenon such as the onset of monsoons over the Indian subcontinent. The pre-onset period during the month of May shows a rather persistent flow field in the monsoon region. At low levels the circulation exhibits anticyclonic excursions over the Arabian Sea, flowing essentially parallel to the west coast of India from the north. Over the Indian subcontinent the major feature is a shallow heat low over northern India. As the heat sources commence a rapid northwestward movement toward the southern edge of the Tibetan Plateau, an interesting configuration of the large-scale divergent circulation occurs. A favorable configuration for a rapid exchange of energy from the divergent to the rotational kinetic energy develops. Strong low level monsoonal circulations evolve, attendant with that the onset of monsoon rains occurs. In order to test this observational sequence, a series of short-range numerical prediction experiments were initiated to define the initial heat sources.

Krishnamurti, T. N.↗

Economics of polysilicon process: A view from Japan

The production process of solar grade silicon (SOG-Si) through trichlorosilane (TCS) was researched in a program sponsored by New Energy Development Organization (NEDO). The NEDO process consists of the following two steps: TCS production from by-product silicon tetrachloride (STC) and SOG-Si formation from TCS using a fluidized bed reactor. Based on the data obtained during the research program, the manufacturing cost of the NEDO process and other polysilicon manufacturing processes were compared. The manufacturing cost was calculated on the basis of 1000 tons/year production. The cost estimate showed that the cost of producing silicon by all of the new processes is less than the cost by the conventional Siemens process. Using a new process, the cost of producing semiconductor grade silicon was found to be virtually the same with any to the TCS, diclorosilane, and monosilane processes when by-products were recycled. The SOG-Si manufacturing processes using the fluidized bed reactor, which needs further development, shows a greater probablility of cost reduction than the filament processes.

Shimizu, Y.↗

Programmable Synaptic Arrays For Electronic Neural Networks

High resistances prevent hotspots in parallel input and output operation. Nonvolatile computer memory combines ultrahigh storage density with extremely-low power dissipation. Accommodates about 1 billion bits in square centimeter of surface area. Bit written with expenditure of less than 1 nanojoule of energy and read with even lower energy. Developed for parallel input and output operation.

Thakoor, Anilkumar P.↗

Design description report for a photovoltaic power system for a remote satellite earth terminal

A photovoltaic (PV) power system has been installed as an adjunct to an agricultural school at Wawatobi on the large northern island of the Republic of Indonesia. Its purpose is to provide power for a satellite earth station and a classroom. The renewable energy developed supports the video and audio teleconferencing systems as well as the facility at large. The ground station may later be used to provide telephone service. The installation was made in support of the Agency for International Development's Rural Satellite Program, whose purpose is to demonstrate the use of satellite communications for rural development assistance applications. The objective of this particular PV power system is to demonstrate the suitability of a hybrid PV engine-generator configuration for remote satellite earth stations.

Marshall, N. A.↗

Flame Speeds and Energy Considerations for Explosions in a Spherical Bomb

Simultaneous measurements were made of the speed of flame and the rise in pressure during explosions of mixtures of carbon monoxide, normal heptane, iso-octane, and benzene in a 10-inch spherical bomb with central ignition. From these records, fundamental properties of the explosive mixtures, which are independent of the apparatus, were computed. The transformation velocity, or speed at which flame advances into and transforms the explosive mixture, increases with both the temperature and the pressure of the unburned gas. The rise in pressure was correlated with the mass of charge inflamed to show the course of the energy developed.

Fiock, Ernest F↗

Performance of Blowdown Turbine Driven by Exhaust Gas of Nine-Cylinder Radial Engine

An investigation was made of an exhaust-gas turbine having four separate nozzle boxes each covering a 90 degree arc of the nozzle diaphragm and each connected to a pair of adjacent cylinders of a nine-cylinder radial engine. This type of turbine has been called a "blowdown" turbine because it recovers the kinetic energy developed in the exhaust stacks during the blowdown period, that is the first part of the exhaust process when the piston of the reciprocating engine is nearly stationary. The purpose of the investigation was to determine whether the blow turbine could develop appreciable power without imposing any large loss in engine power arising from restriction of the engine exhaust by the turbine.

Turner, L Richard↗

Combustion of Gaseous Mixtures

This report not only presents matters of practical importance in the classification of engine fuels, for which other means have proved inadequate, but also makes a few suggestions. It confirms the results of Withrow and Boyd which localize the explosive wave in the last portions of the mixture burned. This being the case, it may be assumed that the greater the normal combustion, the less the energy developed in the explosive form. In order to combat the detonation, it is therefore necessary to try to render the normal combustion swift and complete, as produced in carbureted mixtures containing benzene (benzol), in which the flame propagation, beginning at the spark, yields a progressive and pronounced darkening on the photographic film.

Duchene, R↗

High Order Discontinuous Gelerkin Methods for Convection Dominated Problems with Application to Aeroacoustics

This project is about the investigation of the development of the discontinuous Galerkin finite element methods, for general geometry and triangulations, for solving convection dominated problems, with applications to aeroacoustics. On the analysis side, we have studied the efficient and stable discontinuous Galerkin framework for small second derivative terms, for example in Navier-Stokes equations, and also for related equations such as the Hamilton-Jacobi equations. This is a truly local discontinuous formulation where derivatives are considered as new variables. On the applied side, we have implemented and tested the efficiency of different approaches numerically. Related issues in high order ENO and WENO finite difference methods and spectral methods have also been investigated. Jointly with Hu, we have presented a discontinuous Galerkin finite element method for solving the nonlinear Hamilton-Jacobi equations. This method is based on the RungeKutta discontinuous Galerkin finite element method for solving conservation laws. The method has the flexibility of treating complicated geometry by using arbitrary triangulation, can achieve high order accuracy with a local, compact stencil, and are suited for efficient parallel implementation. One and two dimensional numerical examples are given to illustrate the capability of the method. Jointly with Hu, we have constructed third and fourth order WENO schemes on two dimensional unstructured meshes (triangles) in the finite volume formulation. The third order schemes are based on a combination of linear polynomials with nonlinear weights, and the fourth order schemes are based on combination of quadratic polynomials with nonlinear weights. We have addressed several difficult issues associated with high order WENO schemes on unstructured mesh, including the choice of linear and nonlinear weights, what to do with negative weights, etc. Numerical examples are shown to demonstrate the accuracies and robustness of the methods for shock calculations. Jointly with P. Montarnal, we have used a recently developed energy relaxation theory by Coquel and Perthame and high order weighted essentially non-oscillatory (WENO) schemes to simulate the Euler equations of real gas. The main idea is an energy decomposition under the form epsilon = epsilon(sub 1) + epsilon(sub 2), where epsilon(sub 1) is associated with a simpler pressure law (gamma)-law in this paper) and the nonlinear deviation epsilon(sub 2) is convected with the flow. A relaxation process is performed for each time step to ensure that the original pressure law is satisfied. The necessary characteristic decomposition for the high order WENO schemes is performed on the characteristic fields based on the epsilon(sub l) gamma-law. The algorithm only calls for the original pressure law once per grid point per time step, without the need to compute its derivatives or any Riemann solvers. Both one and two dimensional numerical examples are shown to illustrate the effectiveness of this approach.

Shu, Chi-Wang↗

Transport in Carbon Nanotubes with Defects

The linear response conductance of a defect free carbon nanotube connected to ideal contacts is approximately 4e(sup 2)/h. In this paper, we first calculate the conductance characteristics of a uniform tube in the presence of an applied bias by assuring different forms of the potential drop across the wire. It is shown that for long tubes, the conduction mechanism involve a only the four non degenerate subands when the electric field drops slowly across the the tube. We then proceed to calculate the transmission and low bias conductance of tubes with defects. Here, we show that a weak uniform disorder in the tube does not cause a dramatic change in the conductance. However the presence of certain substitutional defects, the transmission coefficient versus energy develops a gap and this can cause a dramatic change in the low bias conductance. The effect of coherence is neglected.

Anatram, M. P.↗

Visibility Studies

Studies conducted by the Environmental Studies Laboratory of the University of Utah embrace investigations of the effects of air pollutants on vegetation; air quality in arid and semi-arid regions surrounding energy developments; and the amount, size and type of particles in the atmosphere. In its visibility studies, the laboratory uses a computer program called RADTMO for Radiative Transfer Models. The program computes the characteristics of scattered radiation in the atmosphere including ozone concentration and aerosol density at various altitudes. Calculations provide information used in determining sky color intensity for visibility modeling under different atmospheric conditions. The laboratory was able to avoid the cost of developing a new computer program by using RADTMO for their calculations.

Source record↗

The Race To Understand A Changing Planet

The Earth's climate is changing rapidly. In some respects, the rate of change is outpacing the predictions of only a few years ago. The challenge to Earth Science is to put forward credible projections of possible future climates so that the public and policy makers can make science-based decisions about energy development strategies. Models, observations and experiments all play strong roles in improving knowledge and increasing confidence in our predictions. The models have progressed from simple, coarse-resolution descriptions of atmospheric dynamics and physics only twenty years ago, to full-up Earth System models (ESMs) that include complete descriptions of the oceans and cryosphere. It has been convincingly argued that such complexity - the construction of realistic "toy" Earth's - is necessary to address the complex processes involved in climate change, including not only the physical atmosphere, oceans and cryosphere, but also the carbon cycle - both its natural and anthropogenic components - and the biosphere. Observations, particularly satellite observations, have more or less kept pace with the demands of the modelers, being able to observe progressively more and different facets of the Earth system, but the global satellite fleet is in need of an overhaul very soon. Lastly, field experiments and process studies confront the models with facts and allow us to develop more sophisticated and accurate satellite data algorithms. The challenges facing our relatively small Earth and planetary science communities are considerable and the stakes are significant. The stakeholders, now numbering 7 billion but soon to be 10 billion, will be relying on our results and capabilitie's to guide them into the future.

Sellers, Piers J.↗