Search NASA⌕ Search

SEARCH · Search NASA

Results for “Environmental Chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of multiple calcination cycles on CO 2 capture efficiency during carbonation of MgO in a mineral looping process

Magnesium oxide (MgO) is considered as a potential sorbent for direct air capture of carbon dioxide in a looping process. Previous research on mineral looping for carbon capture from flue gas using MgO has shown deactivation of the sorbent with repeated cycles but repeated cycling for carbonation at ambient conditions has not been yet investigated. Here, we tested three cycles of carbonation for MgO nano-scale powders with different starting surface area. We find that carbonation efficiency is higher at higher surface area. No decrease in carbonation efficiency was observed with cycling, instead we find that carbonation efficiency and surface area are stable or even increasing with cycling. Based on our experimental data, we hypothesize that the carbonation in presence of relative humidity leads to first hydration of MgO, leading to formation of brucite (Mg(OH) 2 ). This formation of Mg(OH) 2 is a volume-increasing reaction, which leads to fracturing of MgO particles and results in an increase in surface area. We observed formation of amorphous and crystalline hydrated carbonates. The crystalline phase observed was nesquehonite (MgCO 3 ⋅ 3H 2 O). Our results show that MgO does not show any deactivation with repeated cycling for carbon capture at ambient conditions and in the presence of humidity. These findings therefore indicate that MgO is a suitable candidate as sorbent material for direct air capture of carbon dioxide.

Ambient weathering↗
DOE OSTI2021

Soil texture and environmental conditions influence the biogeochemical responses of soils to drought and flooding

Abstract Climate change is intensifying the global water cycle, with increased frequency of drought and flood. Water is an important driver of soil carbon dynamics, and it is crucial to understand how moisture disturbances will affect carbon availability and fluxes in soils. Here we investigate the role of water in substrate-microbe connectivity and soil carbon cycling under extreme moisture conditions. We collected soils from Alaska, Florida, and Washington USA, and incubated them under Drought and Flood conditions. Drought had a stronger effect on soil respiration, pore-water carbon, and microbial community composition than flooding. Soil response was not consistent across sites, and was influenced by site-level pedological and environmental factors. Soil texture and porosity can influence microbial access to substrates through the pore network, driving the chemical response. Further, the microbial communities are adapted to the historic stress conditions at their sites and therefore show site-specific responses to drought and flood.

58 GEOSCIENCES↗
DOE OSTI2024

Fe-rich X-ray amorphous material records past climate and persistence of water on Mars

X-ray amorphous material comprises 15-73 wt.% of sedimentary rocks and eolian sediments in Gale crater. This material is variably siliceous and iron rich but aluminum poor. The presence of volatiles is consistent with the existence of incipient weathering products. To better understand the implications of this material for past aqueous conditions on Mars, here we investigate X-ray amorphous material formation and longevity within terrestrial iron rich soils with varying ages and environmental conditions using bulk and selective dissolution methods, X-ray diffraction, and transmission electron microscopy. Results indicate that in situ aqueous alteration is required to concentrate iron into clay-size fraction material. Cooler climates promote the formation and persistence of X-ray amorphous material whereas warmer climates promote the formation of crystalline secondary phases. Iron rich X-ray amorphous material formation and persistence on Mars are therefore consistent with past cool and relatively wet environments followed by long-term cold and dry conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Sustainable extraction of rare earth elements from coal fly ash leachates using a recyclable ionic liquid

The growing demand for rare earth elements (REEs) has prompted interest in their recovery from alternative sources such as coal fly ash (CFA). This study explores the ionic liquid (IL) betainium bis(trifluoromethylsulfonyl)imide, [Hbet][Tf 2 N], for selective extraction of REEs from leachates of a Class C CFA. While previous studies have demonstrated the effectiveness of using [Hbet][Tf 2 N] to extract REEs from different types of CFA in direct ash-IL systems, this study investigates four CFA leachates prepared using HCl, HNO 3 , H 2 SO 4 , and citrate. Extraction experiments were conducted across varying pH levels and with additives such as ascorbic acid and betaine. Among the systems tested, [Hbet][Tf 2 N] achieved REE recoveries of 51% and 47% from the HCl and citrate leachates, respectively, comparable to 49% REE recovery in ash-IL extraction. Co-extraction of bulk elements was significantly reduced in the leachate-IL systems. Optimal REE extraction occurred near pH 11, and addition of ascorbic acid effectively suppressed iron co-extraction without compromising REE recovery. Recycling experiments demonstrated that [Hbet][Tf₂N] retains its performance over five cycles with manageable losses. These results reveal the promise of [Hbet][Tf 2 N] for effectively recovering REEs from leachates of solid wastes, highlighting its applicability as a sustainable strategy for other aqueous REE feedstocks.

chemistry↗
DOE OSTI2022

Metal (hydr)oxide surface precipitates and their effects on potassium sorption

Surface precipitation has been shown to occur on rapid time scales in clay and metal oxide mineral systems. The formation of surface precipitates is hypothesized to present new potential sorption sites for potassium (K), where K can become incorporated into newly formed interlayer spaces (e.g., between tetrahedral–octahedral–tetrahedral stacked sheets). The objective of this study is to determine the effects of newly formed mineral surface precipitates on K sorption. Potassium adsorption experiments were conducted by utilizing Al 2 O 3 and SiO 2 sorbents in the presence of various cations (magnesium, zinc, and nickel) that helped to catalyze the formation of surface precipitates. Dissolved concentrations of elements were monitored via inductively coupled plasma optical emission spectrometry (ICP-OES). Solids were characterized via X-ray diffraction (XRD), and K surface complexation was analyzed via X-ray absorption near edge structure (XANES) spectroscopy. X-ray diffraction analysis indicated bayerite, layered double hydroxides (LDH), and silicated LDH were formed as reaction products, thus creating new surface sites for potential K adsorption. The presence of Si increased K adsorption perhaps due to its role in the formation of LDH surface precipitates. When the differences between observed and theoretical surface area normalized K sorption densities were averaged, a 31% increase in K adsorption was observed in the presence of Si. XANES analysis indicated that the binding mechanism of K to Si is different than that of K to Al, perhaps due to the presence of inner-sphere complexation of K to Al-oxide. Samples reacted for one month versus one week yielded more intense XANES post-edge peaks which indicated that the K sorption complex changes over time. Altogether, our findings provide novel insights into the mechanisms of K fixation in soil and has high implication in providing improved K fertilizer recommendation to growers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Titanium dioxide and table sugar enhance the leaching of silver out of nanosilver packaging

We manufactured laboratory-scale food packages containing 2.57 ± 0.18 × 10 –3 wt% silver nanoparticles (AgNPs) and used them to show that table sugar (sucrose) and microcrystalline titanium dioxide (μTiO 2 ) enhance Ag migration from these packages and into aqueous food simulants. Ag migration into purified water was detected but was below the limit of ICP-MS quantitation, giving a range of potential Ag migration between 0.059 and 0.082 ng cm –2 packaging surface area. Ag migration into 9 wt% aqueous sucrose solution was 0.547 ± 0.084 ng cm –2 and migration into 9 wt% sucrose solution containing 0.01 wt% μTiO 2 was 0.724 ± 0.032 ng cm –2 . Total Ag migration into a 0.01 wt% μTiO 2 aqueous dispersion without sucrose was between 0.122 and 0.162 ng cm –2 , with upper and lower limits defined by the detectability of Ag in the supernatant phase of the simulant. If the midpoint of this range is taken as a baseline, these results imply that, compared to purified water, Ag migration was increased by approximately 10.3 times when the water simulant contained μTiO 2 and sucrose at commercially-relevant concentrations. Notably, the Ag migrated into water containing both ingredients exceeded the total Ag migrated into either of the single-ingredient simulants, pointing to a potential cooperative relationship between sucrose and μTiO 2 that possibly derives from binding and redox interactions between these two ingredients. Sucrose and μTiO 2 also both reduced a portion of migrated Ag + back into AgNPs, and μTiO 2 particles efficiently captured (>25% by mass) migrated Ag on their surfaces. Similar effects on migration were observed with nanocrystalline TiO 2 . Furthermore, these experiments are the first to show that TiO 2 particles exert a strong influence on the quantity and form of Ag that could migrate from AgNP-enabled packaging, suggesting that food formulations and interactions between individual food components may be important to consider when evaluating the fate of nanoparticles in these consumer applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Arbuscular mycorrhiza convey significant plant carbon to a diverse hyphosphere microbial food web and mineral‐associated organic matter

Summary Arbuscular mycorrhizal fungi (AMF) transport substantial plant carbon (C) that serves as a substrate for soil organisms, a precursor of soil organic matter (SOM), and a driver of soil microbial dynamics. Using two‐chamber microcosms where an air gap isolated AMF from roots, we 13 CO 2 ‐labeled Avena barbata for 6 wk and measured the C Rhizophagus intraradices transferred to SOM and hyphosphere microorganisms. NanoSIMS imaging revealed hyphae and roots had similar 13 C enrichment. SOM density fractionation, 13 C NMR, and IRMS showed AMF transferred 0.77 mg C g −1 of soil (increasing total C by 2% relative to non‐mycorrhizal controls); 33% was found in occluded or mineral‐associated pools. In the AMF hyphosphere, there was no overall change in community diversity but 36 bacterial ASVs significantly changed in relative abundance. With stable isotope probing (SIP)‐enabled shotgun sequencing, we found taxa from the Solibacterales, Sphingobacteriales, Myxococcales, and Nitrososphaerales (ammonium oxidizing archaea) were highly enriched in AMF‐imported 13 C (> 20 atom%). Mapping sequences from 13 C‐SIP metagenomes to total ASVs showed at least 92 bacteria and archaea were significantly 13 C‐enriched. Our results illustrate the quantitative and ecological impact of hyphal C transport on the formation of potentially protective SOM pools and microbial roles in the AMF hyphosphere soil food web.

13C SIP↗
DOE OSTI2022

2,4–dinitroanisole transformation during advanced oxidation with ultraviolet light emitting diodes and hydrogen peroxide

This study investigated the kinetics and reaction mechanisms associated with advanced oxidation of 2,4-dinitroanisole (DNAN) with light emitting diodes (LEDs) in the UV/H2O2 process. The pseudo first-order reaction rate constants for DNAN oxidation depended on the H 2 O 2 /DNAN molar ratio and were between 0.017 and 0.026 min –1 . Hydroxyl radical scavenging was strongly implicated by the experimental results. High mass spectrophotometric chromatograms showed the presence of several by-products, including three with ecotoxicity that is greater than that of DNAN. Transformation pathways were analysed using Density Functional Theory (DFT), which helped to predict the presence of experimentally detected DNAN by-products by considering Mulliken charges. Furthermore, this study is the first to elucidate DNAN transformation mechanisms using both experimental studies and computational chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Driving Zn-MnO2 grid-scale batteries: A roadmap to cost-effective energy storage

Highlights Zn-MnO 2 batteries promise safe, reliable energy storage, and this roadmap outlines a combination of manufacturing strategies and technical innovations that could make this goal achievable. Approaches such as improved efficiency of manufacturing and increasing active material utilization will be important to getting costs as low as $100/kWh, but key materials innovations that facilitate the full 2-electron capacity utilization of MnO 2 , the use of high energy density 3D electrodes, and the promise of a separator-free battery with greater than 2V potential offer a route to batteries at $50/kWh or less. Abstract Large-scale energy storage is certain to play a significant, enabling role in the evolution of the emerging electrical grid. Battery-based storage, while not a dominant form of storage today, has opportunity to expand its utility through safe, reliable, and cost-effective technologies. Here, secondary Zn–MnO 2 batteries are highlighted as a promising extension of ubiquitous primary alkaline batteries, offering a safe, environmentally friendly chemistry in a scalable and practical energy dense technology. Importantly, there is a very realistic pathway to also making such batteries cost-effective at price points of $50/kWh or lower. By examining manufacturing examples at the Zn–MnO 2 battery manufacturer Urban Electric Power, a roadmap has been created to realize such low-cost systems. By focusing on manufacturing optimization through reduced materials waste, scalable manufacturing, and effective materials selection, costs can be significantly reduced. Ultimately, though, coupling these approaches with emerging research and development advances to enable full capacity active materials utilization and battery voltages greater than 2V are likely needed to drive costs below a target of $50/kWh. Reaching this commercially important goal, especially with a chemistry that is safe, well-known, and reliably effective stands to inject Zn–MnO 2 batteries in the storage landscape at a critical time in energy storage development and deployment. Graphical abstract

Spoerke, Erik D. (ORCID:0000000322862560)↗
DOE OSTI2020

Interpretation of Mineralogical Diagenesis for Assessment of Radionuclide Transport at Pahute Mesa, Nevada National Security Site

Pahute Mesa (PM) in southern Nevada was one of the four principal underground nuclear testing areas at the Nevada National Security Site (NNSS), known as the “Nevada Test Site” until 2010 (Figure 1). Eighty-two underground nuclear tests were conducted at PM in northwestern corner of NNSS (USDOE, 2015). The PM area of underground nuclear testing is located near the center of the Pahute Mesa and Oasis Valley (PM-OV) groundwater basin, which discharges to the southwest near Oasis Valley (OV) north of Beatty, Nevada (Fenelon et al. 2016; Jackson et al., 2020). Most of the PM tests were located at depths near or below the regional water table and, therefore, present potential sources of groundwater contamination from release of test-related radionuclides.

58 GEOSCIENCES↗
DOE OSTI2022

Thin Film Electrodes for Anodic Stripping Voltammetry: A Mini-Review

Anodic stripping voltammetry (ASV) is a powerful electrochemical analytical technique that allows for the detection and quantification of a variety of metal ion species at very low concentrations in aqueous media. While early, traditional ASV measurements relied on macroscopic electrodes like Hg drop electrodes to provide surfaces suitable for plating/stripping, more recent work on the technique has replaced these electrodes with thin film metal electrodes generated in situ . Such electrodes are plated alongside the analyte species onto the surface of a primary electrode, producing a composite metal electrode from which the analyte(s) can then be stripped, identified, and quantified. In this minireview, we will explore the development and use of these unique electrodes in a variety of different applications. A number of metals (e.g., Hg, Bi, Sn, etc.) have shown promise as thin film ASV electrodes in both acidic and alkaline media, and frequently multiple metals in addition to the analyte of interest are deposited together to optimize the plating/stripping behavior, improving sensitivity. Due to the relatively simple nature of the measurement and its suitability for a wide range of pH, it has been used broadly: To measure toxic metals in the environment, characterize battery materials, and enable biological assays, among other applications. We will discuss these applications in greater detail, as well as provide perspective on future development and uses of these thin film electrodes in ASV measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Chromium-for-Aluminum Substitution in Synthetic Serpentine

Cr-bearing clay minerals are products of hydrothermal alteration and fluid–rock interactions of ultramafic rocks that form serpentine minerals. Cr is typically observed to substitute for Al in serpentine minerals, but the crystal chemistry and environmental constraints on this substitution are unknown. Here, we synthesized endmember and Cr-substituted amesite, a typical Al-serpentine mineral, via the hydrothermal method. We found that the phase purity highly depends on the pH of the hydrothermal solution, which should be controlled at ~12.7 to avoid the formation of impurity phases. Additionally, amesite can incorporate Cr at a concentration equivalent to ~39.5% substitution of Al. The Cr-free and Cr-substituted amesite are highly defective and contain multiple polytypes, including 6R 2 , 2M 1 , and possibly 2H 2 . However, the relative proportions of these polytypes do not change with increasing chromium substitution.

Al-lizardite↗
DOE OSTI2022

Effective radiative forcing of anthropogenic aerosols in E3SM version 1: historical changes, causality, decomposition, and parameterization sensitivities

Abstract. The effective radiative forcing of anthropogenic aerosols (ERFaer) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERFaer simulated by the E3SM version 1 (E3SMv1) atmospheric model using both century-long free-running atmosphere–land simulations and short nudged simulations. We relate the simulated ERFaer to characteristics of the aerosol composition and optical properties, and we evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. The relationships between key aerosol and cloud properties (relative changes between pre-industrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period of 1870–1969. In addition to the regional differences in the simulated relationships, a reduced sensitivity in cloud droplet number and other cloud properties to aerosol perturbations is seen when the aerosol perturbation is large. Consequently, the global annual mean ERFaer magnitude does not increase after around 1970. The ERFaer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol–cloud interactions). Compared to other models, E3SMv1 features large relative changes in the cloud droplet effective radius in response to aerosol perturbations. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds (that causes a large effect on longwave ERFaer). As suggested by a previous study, the large ERFaer appears to be one of the reasons why the model cannot reproduce the observed global mean temperature evolution in the second half of the 20th century. Sensitivity simulations are performed to understand which parameterization and/or parameter changes have a large impact on the simulated ERFaer. The ERFaer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-model forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERFaer, it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗