Search NASA⌕ Search

SEARCH · Search NASA

Results for “Excellent Agreement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Measurements of W + W − production cross-sections in pp collisions at $\sqrt{s}=13$ TeV with the ATLAS detector

Measurements of W + W − → e ± νμ ∓ ν production cross-sections are presented, providing a test of the predictions of perturbative quantum chromodynamics and the electroweak theory. The measurements are based on data from pp collisions at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider in 2015–2018, corresponding to an integrated luminosity of 140 fb −1 . The number of events due to top-quark pair production, the largest background, is reduced by rejecting events containing jets with b-hadron decays. An improved methodology for estimating the remaining top-quark background enables a precise measurement of W + W − cross-sections with no additional requirements on jets. The fiducial W + W − cross-section is determined in a maximum-likelihood fit with an uncertainty of 3.1%. The measurement is extrapolated to the full phase space, resulting in a total W + W − cross-section of 127 ± 4 pb. Differential cross-sections are measured as a function of twelve observables that comprehensively describe the kinematics of W + W − events. The measurements are compared with state-of-the-art theory calculations and excellent agreement with predictions is observed. A charge asymmetry in the lepton rapidity is observed as a function of the dilepton invariant mass, in agreement with the Standard Model expectation. A CP-odd observable is measured to be consistent with no CP violation. Limits on Standard Model effective field theory Wilson coefficients in the Warsaw basis are obtained from the differential cross-sections.

Accelerator Physics↗

Power counting energy flow polynomials

Power counting is a systematic strategy for organizing collider observables and their associated theoretical calculations. In this paper, we use power counting to characterize a class of jet substructure observables called energy flow polynomials (EFPs). EFPs provide an overcomplete linear basis for infrared-and-collinear safe jet observables, but it is known that in practice, a small subset of EFPs is often sufficient for specific jet analysis tasks. By applying power counting arguments, we obtain linear relationships between EFPs that hold for quark and gluon jets to a specific order in the power counting. We test these relations in the parton shower generator Pythia, finding excellent agreement. Power counting allows us to truncate the basis of EFPs without affecting performance, which we corroborate through a study of quark-gluon tagging and regression.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A variational phase-field model For ductile fracture with coalescence dissipation

A novel phase-field model for ductile fracture is presented. The model is developed within a consistent variational framework in the context of finite-deformation kinematics. A novel coalescence dissipation introduces a new coupling mechanism between plasticity and fracture by degrading the fracture toughness as the equivalent plastic strain increases. The proposed model is compared with a recent alternative where plasticity and fracture are strongly coupled. Several representative numerical examples motivate specific modeling choices. In particular, a linear crack geometric function provides an “unperturbed” ductile response prior to crack initiation, and Lorentz-type degradation functions ensure that the critical fracture strength remains independent of the phase-field regularization length. In addition, the response of the model is demonstrated to converge with a vanishing phase-field regularization length. Additionally, the model is then applied to calibrate and simulate a three-point bending experiment of an aluminum alloy specimen with a complex geometry. The effect of the proposed coalescence dissipation coupling on simulations of the experiment is first investigated in a two-dimensional plane strain setting. The calibrated model is then applied to a three-dimensional calculation, where the calculated load-deflection curves and the crack trajectory show excellent agreement with experimental observations. Finally, the model is applied to simulate crack nucleation and growth in a specimen from a recent Sandia Fracture Challenge.

42 ENGINEERING↗

Reference surface excess isotherms for carbon dioxide adsorption on ammonium ZSM-5 at various temperatures

Abstract This work is part of the effort at the Facility for Adsorbent Characterization and Testing (FACT lab) at the National Institute of Standards and Technology (NIST) to develop reference materials, reference data, and measurement best practices for adsorption metrology. High-pressure surface excess isotherms for CO 2 adsorption on NIST Reference Material 8852 (ammonium ZSM-5) at 15 °C, 25 °C, and 35 °C are reported, expanding on a FACT Lab-organized international interlaboratory study on this sorbent/sorbate pair at 20 °C. The range of temperatures of the present study is of interest for many CO 2 adsorption measurements and applications. Measurements were made using five different adsorption instruments, both manometric and gravimetric. Excellent agreement in the measured isotherms among the instruments was found. An empirical reference equation of the form, $${n}_{ex,ref}({P}_{eq})=\frac{c}{\{{1+\mathrm{exp}[\left(-\mathrm{ln}\left(P\right)+a\right)/b ]\}}^{b }} ,$$ n e x , r e f ( P eq ) = c { 1 + exp [ - ln P + a / b ] } b , [ n ex,ref is surface excess uptake (mmol/g); P eq is equilibrium pressure (MPa); P is ( P eq )/(1 MPa)]; a , b , c are constants] and the 95% uncertainty interval were determined for the isotherms at each of the temperatures. Lastly, the isosteric heat of adsorption is estimated from absolute isotherms derived from the surface excess reference data.

Nguyen, Huong Giang T. (ORCID:0000000210527565)↗

Phase Measurements of a 140-GHz Confocal Gyro-Amplifier

The phase stability of a 140-GHz, 1-kW pulsed gyro-amplifier system and the phase dependence on the cathode voltage were experimentally measured. To optimize the measurement precision, the amplifier was operated at 47 kV and 1 A, where the output power was ~ 30 W. The phase was determined to be stable both pulse-to-pulse and during each pulse, so far as the cathode voltage and electron beam current are constant. The phase variation with voltage was measured and found to be 130 ± 30° /kV, in excellent agreement with simulations. The electron gun used in this device is non-adiabatic, resulting in a steep slope of the beam pitch factor with respect to cathode voltage. This was discovered to be the dominant factor in the phase dependence on voltage. The use of an adiabatic electron gun is predicted to yield a significantly smaller phase sensitivity to voltage, and thus a more phase-stable performance. To our knowledge, these are the first phase measurements reported for a gyro-amplifier operating at a frequency above W-band.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mutual Diffusion Coefficients and Refractive Index Increments of K 2 SO 4 (aq) at 298.15 K from Rayleigh Interferometry

Here, isothermal mutual diffusion coefficients (interdiffusion coefficients) were measured for K 2 SO 4 (aq) at 298.15 ± 0.005 K, at numerous concentrations ranging from dilute solutions to near saturation (0.59648 mol∙dm -3 ; 0.61349 mol∙kg -1 ) under free diffusion boundary conditions, using high precision Rayleigh interferometry. Under the experimental conditions these diffusion coefficients are on the volume-fixed reference frame D v . Two series of experiments were performed, the first using the traditional experimental approach with a mercury lamp source and with the interference patterns being recorded on glass photographic plates, and the second with a He-Ne laser light source and computerized data acquisition using a photodiode array. The results from both series of experiments are in excellent agreement, and generally yield diffusion coefficients precise to at least 0.002 x 10 -9 m 2 ∙s 1 (0.15% to 0.19%) and in most cases to 0.001 x 10 -9 m 2 ∙s -1 (0.07% to 0.1%). These experiments also yield accurate values of the refractive index differences for the solution pairs used in the diffusion experiments. The new diffusion coefficients are compared to two sets of published values of diffusion coefficients for K 2 SO 4 (aq) which are somewhat discrepant from each other. This study extends and complements our earlier work on the diffusion coefficients of the most common brine salts: NaCl(aq), KCl(aq), MgCl 2 (aq), CaCl 2 (aq), Na 2 SO 4 (aq), ] MgSO 4 (aq), NaHCO 3 (aq), and KHCO 3 (aq) at 298.15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlations of the Steam Oxidation Rate Constant of BWR Alloy Zircaloy-2 at 800–1400 °C

Steam oxidation experiments were conducted at 800–1400 °C with boiling water reactor alloy Zircaloy-2 strip specimens. Sample weight gain measurements were performed on the oxidized specimens before and after the test and were compared to oxygen pickup calculations using the Cathcart–Pawel correlation. The results showed that Zircaloy-2 follows the parabolic law at temperatures above 1000 °C. At or below 1000 °C, the oxidation rate was very low when compared to Cathcart–Pawel correlation and can be represented by a cubic expression. Arrhenius expressions are given to describe the parabolic rate constants at temperatures above 1000 °C and cubic rate constants are provided for temperatures at or below 1000 °C. Here, the weight gains calculated by our Arrhenius correlations are in excellent agreement with the measured sample weight gains at all test temperatures.

36 MATERIALS SCIENCE↗

On the Order Parameter of the Continuous Phase Transition in the Classical and Quantum Mechanical Limits

The mean field theory is revisited in the classical and quantum mechanical limits. Taking into account the boundary conditions at the phase transition and the third law of the thermodynamics the physical properties of the ordered and disordered phases were reported. The equation for the order parameter predicts the occurrence of a saturation of Ψ 2 = 1 near Θ S , the temperature below the quantum mechanical ground state is reached. The theoretical predictions are also compared with high resolution thermal expansion data of SrTiO 3 monocrystalline samples and other some previous results. An excellent agreement has been found suggesting a universal behavior of the theoretical model to describe continuous structural phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chapter Six - Derivation, cross-validation, and comparison of analytic formulas for electrostatic deflector aberrations

Here, we derived first and second order analytic aberration formulas in the horizontal transverse plane for an electrostatic deflector specified by the reference orbit radius, the central angle spanning the deflector, and its inhomogeneity coefficients. The derivation was performed using an iterative order-by-order perturbation method in a Frenet–Serret beamline coordinate system. We produced a C program edabrt for calculation of the first and second order aberrations using the formulas that we derived. The electrostatic deflector aberration formulas from Wollnik (1965) disagree with COSY INFINITY and the aberration formulas that we derived here, and they also deviate from the first and second order symplecticity conditions. The reason for this discrepancy is that the aberration formulas from Wollnik (1965) consider only motion in the main field of the deflector and do not properly account for fringe field effects, in particular the necessarily occurring change of kinetic energy due to the change in potential. The code GIOS uses electrostatic aberration formulas from Wollnik (1965) and exhibits the same discrepancy. We performed a comparison of first and second order electrostatic deflector aberrations for (1) the analytic formulas derived in this work, (2) differential-algebraic (DA) numerical integration of the equations of motion using the code COSY INFINITY, (3) the aberration formulas from Wollnik (1965), (4) aberrations computed using the code GIOS, and (5) the aberration formulas from Wollnik (1965) adjusted to account for the occurring change in potential. An electrostatic spherical deflector and an electrostatic cylindrical deflector were used as test cases for this comparison. There is excellent agreement between methods (1), (2), and (5), and these three methods satisfy the first and second order symplecticity conditions.

43 PARTICLE ACCELERATORS↗

Evaluating the grain-scale deformation behavior of a single-phase FCC high entropy alloy using synchrotron high energy diffraction microscopy

We report although the deformation behavior of high-entropy alloys (HEAs) has been extensively studied at the macroscale, many important properties have yet to be explored for these alloys at the microscale, thus hampering accurate prediction of damage and failure processes. Synchrotron high-energy diffraction microscopy (HEDM) and fast-Fourier transform-based crystal plasticity modeling was conducted to investigate the three-dimensional (3D) grain-resolved micromechanical response for approximately 1,900 constituent grains within a single-phase FCC HEA up to 1% applied strain. The evolution of grain-resolved elastic strains, lattice reorientations, and maximum resolved shear stresses (mRSS) were evaluated to quantify elastic, yield, and fully plastic behavior. Overall, the initial critical resolved shear stress (CRSS), determined via in situ HEDM and companion modeling, was found to be > 20% higher than estimated using the classical polycrystalline Taylor factor (M = 3.06). However, a descriptive parameter based on the average grain-resolved Taylor factor ($\overline{M}$) was found to show excellent agreement with plastic yielding behavior observed within HEDM datasets. Noticeable deviations in HEDM lattice reorientations compared to both EVP-FFT simulations and classical predictions for FCC polycrystals were discovered, highlighting the complexity in correlating local lattice reorientations, Taylor, and Schmid factors with plastic response for this material at the grain-scale. Therefore, it is anticipated that the overall trends and parameter identification of 3D grain-resolved properties in this study can serve as an important foundation for continued mesoscale investigation on both well-established and newly developed Cantor-like HEAs.

36 MATERIALS SCIENCE↗

A ductility metric for refractory-based multi-principal-element alloys

We propose a quantum-mechanical dimensionless metric, the local-lattice distortion (LLD), as a reliable predictor of ductility in refractory multi-principal-element alloys (RMPEAs). The LLD metric is based on electronegativity differences in localized chemical environments and combines atomic-scale displacements due to local lattice distortions with a weighted average of valence-electron count. To evaluate the effectiveness of this metric, we examined body-centered cubic (bcc) refractory alloys that exhibit ductile-to-brittle behavior. Our findings demonstrate that local-charge behavior can be tuned via composition to enhance ductility in RMPEAs. With finite-sized cell effects eliminated, the LLD metric accurately predicted the ductility of arbitrary alloys, which compares well with existing tensile-elongation experiments. To validate further, we qualitatively evaluated the ductility of two refractory RMPEAs, i.e., NbTaMoW and Mo 72 W 13 Ta 10 Ti 2.5 Zr 2.5 , through the observation of crack formation under indentation, again showing excellent agreement with LLD predictions. Additionally, a comparative study of three refractory alloys provides further insights into the electronic-structure origin of ductility in refractory RMPEAs. This proposed metric enables rapid and accurate assessment of ductility behavior in the vast RMPEA composition space.

36 MATERIALS SCIENCE↗

Phase-field modeling of thermally-grown oxide and damage evolution in environmental barrier coatings

Silicon carbide-based ceramic matrix composites protected by environmental barrier coatings (EBCs) present a promising materials solution for next-generation gas turbines. Developing more robust and efficient EBCs is therefore of significant technological importance. During the service in high-temperature oxidative environments, there is a thermally grown oxide (TGO) layer, spontaneously formed in the EBC system. TGO is recognized as a critical factor for the degradation and failure of EBCs, yet the detailed mechanisms of TGO growth and its effect on EBC failure remain unclear. In this study we develop a comprehensive chemo-mechano-phase-field model to simulate growth of the TGO in EBCs, factoring in creep and deformation, and especially the cracking behaviors. The volume expansion due to TGO growth and the resulting large inelastic deformation are addressed by using our recently developed, so-called incremental realization of inelastic deformation (IRID) algorithm, in combination with an adapted Hu-Chen spectral solver for elasticity. Simulations of TGO growth are performed considering different growth modes of TGOs determined mainly by the ratio of oxidant permeability in the topcoat to that in the TGO itself. Large-scale three-dimensional (3D) simulations are performed to model the formation of interconnecting vertical/channel cracks (often called ‘mud cracks’). The simulated crack morphology are in excellent agreement with the experimental observations from the literature. The simulations also provide insights into the cracking of EBCs and its dependence on the structure and constituent properties of the coating system. Furthermore, these results demonstrate the developed damage model can be a useful tool for design of more durable EBCs.

Cracking↗

Prediction of residual stresses in additively manufactured parts using lumped capacitance and classical lamination theory

Several industries are interested in Laser Powder Bed Fusion (L-PBF) Additively Manufactured (AM) metal parts because their designs can be made arbitrarily complex while retaining bulk-type material properties. However, the residual stresses (RS) and distortions caused by the heat gradients inherent to L-PBF processes are detrimental to the structural integrity of the parts and must be taken into consideration during the part design cycle. Predicting the state of stresses in as-built 3D printed parts is a difficult problem that is typically approached with the use of transient thermomechanical Finite Element Models (FEMs). However, the nonlinearities associated with AM processes are difficult to capture in these FEMs without increasing the computational cost of the simulation, limiting their ability to be incorporated into practical design cycles. This work presents a novel analytical framework that combines lumped capacitance nonlinear heat transfer with time dependent classical lamination theory to efficiently and accurately predict RS in as-built L-PBF parts without the need of FEMs. The simulation was compared to Neutron Diffraction (ND) residual strain measurements taken at Oak Ridge National Laboratories (ORNL) as well as Synchrotron X-ray Diffraction (XRD) strain data published by the National Institute of Standards and Technology (NIST). The simulation predictions and the experimental data showed excellent agreement for the in-plane strain directions, and general agreement for the out of plane strain component, highlighting an area where further development can be implemented.

42 ENGINEERING↗

Neutron thermalization in nuclear graphite: A modern story of a classic moderator

Graphite has been of great interest since the dawn of the nuclear era. In this work, we will focus on the thermal neutron scattering of two types of nuclear graphite that have different microstructures, namely, the historic PGA which has a very anisotropic medium-grained needle coke, and the new G347A which is a near-isotropic fine-grained graphite. We report the results of room temperature inelastic neutron scattering measurements for the scattering function, double differential scattering cross-section, and phonon density of states. The obtained results are discussed in conjunction with results extracted from first-principles lattice dynamics simulations of crystalline graphite, using the incoherent approximation and by also including the coherent-one phonon contribution. Excellent agreements have been found between the measured and calculated scattering functions and phonon densities of states. The inclusion of the coherent-one phonon scattering shows a significant improvement of the calculated scattering functions, double differentials, and inelastic scattering cross-sections. We also highlight the physical concerns about the current thermal neutron scattering ENDF/B-VIII of nuclear graphite library and its corresponding phonon density of states. This work aims to provide a new presentation of neutron thermalization by graphite and offers a new set of high quality experimental and computational data for consideration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Monte Carlo Simulations of the Water Draining Experiment of Giacint Critical Assembly

The MCNP6 computer program has been successfully extended to simulate reactor dynamics problems with moving parts of the geometries. Different from the dynamic method developed in other Monte Carlo codes, a movement scheme has been developed to account for the geometrical parts motion during the particle random walk. The MCNP6 computer program has been used to simulate two transient experiments of the Giacint critical assembly. The MCNP6 calculated total neutron flux was compared with that from the Serpent simulation. An excellent agreement was obtained between the results of the two Monte Caro computer programs. The MCNP6 calculated total neutron flux was also compared with the two measured transients. The MCNP6 results predicted a faster transient than the experimental data. The MCNP6 transient simulation was improved with an adjusted geometrical model which shifts the fuel rods slightly to match the measured reactivity worth due to the drained water. (c) 2021 Elsevier Ltd. All rights reserved.

MCNP, Moving Geometries, Monte Carlo Reactor Trans↗

Fuel cycle depletion validation and code-to-code verification studies for High Flux Isotope Reactor highly and low-enriched uranium fuel designs

Here, this paper documents fuel cycle depletion validation and code-to-code verification studies for the High Flux Isotope Reactor (HFIR) highly enriched uranium (HEU) and proposed low-enriched uranium (LEU) fuel designs. In support of HFIR’s world-leading performance, transport and depletion simulations are performed to ensure safe operations, design and qualify irradiation experiments, enhance core components and irradiation facilities, and design and characterize LEU fuel designs. Identifying well-validated, computationally efficient codes is required for the success of these efforts. The HFIR Controller, Shift, and VESTA codes were deployed to simulate HEU uranium–oxide dispersion fuel cycles at 85, 95, and 100 MW operations, as well as LEU fuel cycles operating at 95 MW with uranium–silicide dispersion and uranium–molybdenum monolithic alloy fuel forms. Excellent agreement between the codes and with experimentally obtained 235 U enrichment distributions provides increased confidence in the ability of these codes to model and simulate HFIR’s unique core design.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SCALE inventory and reactivity analysis as part of the Hermes 2021 PSAR review

The readiness of SCALE for comprehensive studies of pebble-bed reactors has been demonstrated through detailed analysis of a fluoride salt–cooled, high-temperature pebble-bed reactor (PB-FHR). The methods developed for pebble-bed reactor modeling in SCALE, particularly for inventory generation, have proven effective in gaining insights into the reactor physics of this advanced reactor. Excellent agreement with another code package has been observed, further highlighting SCALE’s strong performance. The SCALE results supported the US Nuclear Regulatory Commission’s construction permit application review of the Hermes low-power PB-FHR demonstration reactor. A SCALE model of the Hermes reactor was developed at Oak Ridge National Laboratory using information from the Preliminary Safety Analysis Report (PSAR) and supplemented with publicly available data. SCALE reactivity coefficient simulations reproduced PSAR results within 1σ statistical uncertainties. Sensitivity studies emphasized the importance of graphite specifications for accurate keff predictions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

New capabilities for rapid depletion analysis of pebble-bed reactors in SCALE

The SCALE Leap-In for Cores at Equilibrium (SLICE) method leverages capabilities available in the SCALE modeling and simulation suite to facilitate rapid estimation of equilibrium core inventories for flowing-pebble reactor systems in support of a variety of fuel cycle applications. New capabilities that compliment the SLICE method have been developed for the ORIGAMI interface to ORIGEN in SCALE to facilitate rapid depletion calculations for flowing-pebble systems. New features include a more generalized and flexible means of specifying interpolation dimensions, the ability to evaluate pebbles moving through user-defined “axial zones” in each of the pebble’s multiple passes through the core, and the treatment of differential velocities across radial channels (representing both pebble-to-pebble and wall-to-pebble friction effects). ORIGAMI thus provides an efficient user interface to define a pebble’s path and irradiation histories of its multiple passes through the core to calculate the pebble’s time-dependent inventories, which can be useful in various applications domains such as safeguards, criticality safety, and disposal analyses. The consistency of new ORIGAMI approach was verified against the solution obtained using the SLICE method with ORIGEN-ARP, showing excellent agreement.

Skutnik, Steven E. [Oak Ridge National Laboratory ↗