Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exotics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Capitol Reef Ecological Conservation: Mapping Vegetation Functional Groups to Inform Invasive Vegetation Management, Ecological Conservation and Restoration in Capitol Reef National Park

Invasive exotic plant (IEP) species have been found within the park boundaries of Capitol Reef National Park (CARE) in Utah. Currently, remotely sensed datasets such as the Rangeland Analysis Platform (RAP) from the United States Department of Agriculture (USDA) have been used to investigate IEP species within the park, but validation of the national RAP program is necessary for informing decisions at a local scale. CARE seeks a remote monitoring solution that can precisely target managerial efforts within the park’s challenging terrain and hard-to-reach locations. To fulfill this objective, we harnessed Landsat 8 Operational Land Imager (OLI) imagery and leveraged Random Forest (RF) modeling to generate classification maps characterizing vegetation functional groups for 2013 and 2022 within the park. Subsequently, the Land Change Modeler (LCM) in Idrisi TerrSet facilitated the production of a predicted classification map for 2033. The team also devised an annual grass probability map to accentuate areas impacted by exotic grasses. A comparative assessment between the RF classification map and the RAP map for 2022 revealed an overall agreement of 47.41%, with disparities primarily arising from differences in bare soil and shrub areas. Significantly, the 2022 RF-generated classification map showcased an impressive overall accuracy of 92.17%. In short, the probability map, the land cover change detection spanning 2013 to 2022, and the forecasting of observed trends into the future aids in the evaluation of invasive plant impacts and facilitation of CARE’s preparedness for potential ecological disturbances. Notably, in comparison to the RAP, the RF classification method generates functional group maps that are more representative of the study area.

Vanchy Li↗
NASA NTRSDate not supplied

Study of Martian Polar Caps with GISS ROCKE-3D GCM

Martian polar caps consist of both H 2 O and CO 2 ice. While H 2 O ice is mainly passive on modern Mars, it may have not been the case in recent Martian history, when its obliquity was higher, or when it was changing rapidly. The distribution of ice species in the snowpack affects its physical and thermodynamic properties. In the upper layers, it determines its albedo and thermal emissivity. Thus understanding the mutual effect between these ices and their interaction with the atmosphere is crucial for understanding the evolution of Martian polar regions. In this study, we employ a newly-developed Exotic Ices snow model coupled to the NASA Goddard Institute for Space Studies (GISS) ROCKE-3D planetary General Circulation Model (GCM) [1] to study the behavior of Martian polar caps. ROCKE-3D is a planetary GCM developed at NASA GISS as an extension of its Earth climate model, modelE [2]. It has been extensively used to simulate climate of various planets, including Mars (e.g. [3,4]). The Exotic Ices snow model was specially developed for planetary applications which involve more than one condensable in the atmosphere, in which case snow can contain multiple species of ice (CO2 and H 2 O in the Mars case). For each species of ice, the model uses their proper physical properties and phase diagram, but otherwise it treats all species of ice on an equal footing. The combined effects on albedo, thermal inertia and mutual insulation are treated accordingly. The snowpack interacts with the atmospheric dust cycle, and can accumulate a prognostic amount of dust, though the effect of dust on snow properties is not currently treated explicitly, and is prescribed. In this study, we first validate our model against the modern Martial climate, for which we use mission results from Mars Climate Sounder (atmospheric temperature and dust optical depth), SPICAM on Mars Express (atmospheric water), and Viking 2 (surface pressure). We investigate the effect of snow radiative properties on CO 2 and water cycles and the ability of our model to accurately reproduce those with minimal model tuning. We then perform simulations for several obliquities from a recent Martian past, and investigate the behavior of the Martian polar caps in such conditions.

Mars↗
NASA NTRS2024

Chapter 9: Life as We Don't Know It

While Earth contains the only known example of life in the universe, it is possible that life elsewhere is fundamentally different from what we are familiar with. There is an increased recognition in the astrobiology community that the search for life should steer away from terran-specific biosignatures to those that are more inclusive to all life-forms. To start exploring the space of possibilities that life could occupy, we can try to dissociate life from the chemistry that composes it on Earth by envisioning how different life elsewhere could be in composition, lifestyle, medium, and form, and by exploring how the general principles that govern living systems on Earth might be found in different forms and environments across the Solar System. Exotic life-forms could exist on Mars or Venus, or icy moons like Europa and Enceladus, or even as a shadow biosphere on Earth. New perspectives on agnostic biosignature detection have also begun to emerge, allowing for a broader and more inclusive approach to seeking exotic life with unknown chemistry that is distinct from life as we know it on Earth.

Asthma↗
NASA NTRS1971

On the origin of lunar soil 12033

Lunar soil 12033 bulk chemical analysis, suggesting mixture of exotic component with local soil in 41/59 proportion

Beadecker, P. A.↗
NASA NTRS1972

Sunspot analysis and prediction

Evaluation of several procedures that apply rarely used and exotic mathematical functions yields a unique method of application of common trigonometric functions. These functions appear to produce results in the development of a mathematical model capable of describing all available sunspot data.

Source record↗
NASA NTRS1972

Industrial waste pollution

The characteristics and effects of industrial waste pollution in the Chesapeake Bay are discussed. The sources of inorganic and organic pollution entering the bay are described. The four types of pollutants are defined as: (1) inorganic chemical wastes, (2) naturally occurring organic wastes, (3) synthetic organic wastes (exotics) and (4) thermal effluents. The ecological behavior of industrial wastes in the surface waters is analyzed with respect to surface film phenomena, interfacial phenomena, and benthis phenomena

Jensen, L. D.↗
NASA NTRS1972

Sonic-boom minimization.

There have been many attempts to reduce or eliminate the sonic boom. Such attempts fall into two categories: (1) aerodynamic minimization and (2) exotic configurations. In the first category changes in the entropy and the Bernoulli constant are neglected and equivalent body shapes required to minimize the overpressure, the shock pressure rise and the impulse are deduced. These results include the beneficial effects of atmospheric stratification. In the second category, the effective length of the aircraft is increased or its base area decreased by modifying the Bernoulli constant a significant fraction of the flow past the aircraft. A figure of merit is introduced which makes it possible to judge the effectiveness of the latter schemes.

Seebass, R.↗
NASA NTRS1972

Space vehicle gyroscope sensor applications

Considerations which form the basis for the specification, design and evaluation of gyroscopes for spaceborne sensor applications are presented. The applications are distinguished by basic vehicle category: launch vehicles, spacecraft, entry vehicles and sounding rockets. Specifically excluded from discussion are gyroscope effector applications. Exotic or unconventional gyroscopes for which operational experience is nonexistent are mentioned only briefly to alert the reader of future trends. General requirements for testing and evaluation are discussed.

Source record↗
NASA NTRS1970

Medical Automation System at the Marshall Space Flight Center

A computer system is reported for scheduling and coordinating physical examinations for groups of people who work with chemicals, lasers, X-rays, isotopic sources, toxic fuels, adhesives, and exotic metals. Complete medical data on the examined population are continuously updated for a broad medical master file. Statistical methods are employed to project progressive changes in the health status of these employees for possible clinical interventions.

Spraul, J. H.↗
NASA NTRS1972

Design and fabrication of wraparound contact silicon solar cells

Work is reported on the development and production of 1,000 N+/P wraparound solar cells of two different design configurations: Design 1, a bar configuration wraparound and Design 2, a corner pad configuration wraparound. The project goal consisted of determining which of the two designs was better with regard to production cost where the typical cost of a conventional solar cell was considered as the norm. Emphasis was also placed on obtaining the highest possible output efficiency, although a minumum efficiency of 10.5% was required. Five hundred cells of Design 1 and 500 cells of Design 2 were fabricated. Design 1 which used similar procedures to those used in the fabrication of conventional cells, was the less expensive with a cost very close to that of a conventional cell. Design 2 was more expensive mainly because the more exotic process procedures used were less developed than those used for Design 1. However, Design 2 processing technology demonstrated a feasibility that should warrant future investigation toward improvement and refinement.

Goodelle, G.↗
NASA NTRS1972

Scramjet fuel injector design parameters and considerations: Development of a two-dimensional tangential fuel injector with constant pressure at the flame

The factors affecting a tangential fuel injector design for scramjet operation are reviewed and their effect on the efficiency of the supersonic combustion process is evaluated using both experimental data and theoretical predictions. A description of the physical problem of supersonic combustion and method of analysis is followed by a presentation and evaluation of some standard and exotic types of fuel injectors. Engineering fuel injector design criteria and hydrogen ignition schemes are presented along with a cursory review of available experimental data. A two-dimensional tangential fuel injector design is developed using analyses as a guide in evaluating the effects on the combustion process of various initial and boundary conditions including splitter plate thickness, injector wall temperature, pressure gradients, etc. The fuel injector wall geometry is shaped so as to maintain approximately constant pressure at the flame as required by a cycle analysis. A viscous characteristics program which accounts for lateral as well as axial pressure variations due to the mixing and combustion process is used in determining the wall geometry.

Agnone, A. M.↗
NASA NTRS1972

Hydrogen and oxygen sensor development

A reliable and low cost gas sensor was investigated for instantaneously detecting H2 in N2, H2 in air, and O2 in N2. The major portion of the research was spent in developing a sensor which would instantaneously detect H2 to + or - 50 ppm even in the presence of trace amounts of other gases. The experimental procedures used to provide the performance characteristics for the various oscillators are discussed describing the equipment with help of schematics and photographs where applicable. The resulting performance is given in graphical form. In some cases both hydrogen and helium may be present and since both of them effect gas sensors similarly, a method was found to determine the concentration of each. The methods developed are grouped into the following four broad categories: pure metal response, variation in heat conductivity, reduction methods, and exotic processes. From the above it was decided for the present to use a copper oxide reduction process as this process was demonstrated to be capable of determining the concentrations of hydrogen and helium respectively in a gas mixture with air or nitrogen.

Farber, E. A.↗
NASA NTRS1972

Binary stars as X-ray sources.

The idea that many if not most of the powerful galactic X-ray sources are generated in binary star systems containing at least one exotic object with gas is examined. Past studies lending support to this hypothesis are reviewed, and major features of galactic X-ray sources that require explanations are delineated. Attention is given to conclusions gained from optical studies of close binaries and to promising areas of further investigation stemming from the concept of binary stars as X-ray sources.

Burbidge, G.↗
NASA NTRS1972

Mineralogy and origin of Fra Mauro fines and breccias.

Textural features, glassy spherule and glassy aggregate contents, and size-frequency distributions of lithic components of the regolith fines indicate that the Fra Mauro regolith of the smooth terrain is a highly reworked accumulation of debris derived primarily by impact comminution of annealed breccias. Analyses of the glassy spherules suggest that mare-derived debris must amount to less than 5% of the regolith, but exotic materials having the composition of the Fra Mauro breccias (highland-like) cannot be recognized. Breccia samples from the Fra Mauro site include (1) regolith breccias derived by lithification of local regolith material, (2) texturally and compositionally unique white rock breccias that may have been derived from ancient ejecta buried beneath the Fra Mauro formation, and (3) annealed breccias that are excavated samples of the Fra Mauro formation. The latter were deposited as heated impact ejecta, probably by avalanches produced by the Imbrian event and were annealed in situ in a thermal regime perhaps equivalent to that responsible for the pyroxene-hornfels facies of metamorphism in terrestrial rocks.

Quaide, W.↗
NASA NTRS1972

Metallic particles in the Apollo 14 lunar soil.

The metallographic structures, silicate associations and bulk compositions (Ni, Co, P, S, and Si) were determined by microprobe analysis for 205 metal particles selected by magnetic separation from the less than 1 mm, greater than 125 micron fraction of soil samples 14003,18 and 14163,165. A small number of exotic particles were encountered but almost all the metal could be accommodated within one of four subpopulations, the characteristics and genetic significance of which may be stated as follows: (1) the major proportion has Ni and Co contents corresponding to the range of meteoritic metal; (2) small proportion (about 5%) that not only has meteoritic contents of Ni and Co but also shows still distinguishable indications of meteoritic microstructure; (3) another small population (about 10%) consists of metal excavated from lunar mare basalts by cratering events, and thrown onto the Apollo 14 site; and (4) metallic spheroids (about 5%), analogous to those encountered in the vicinity of the Barringer Meteorite Crater, Arizona.

Goldstein, J. I.↗
NASA NTRS1973

Batteries for storage of wind-generated energy

Cost effectiveness characteristics of conventional-, metal gas-, and high energy alkali metal-batteries for wind generated energy storage are considered. A lead-acid battery with a power density of 20 to 30 watt/hours per pound is good for about 1500 charge-discharge cycles at a cost of about $80 per kilowatt hour. A zinc-chlorine battery that stores chlorine as solid chlorine hydrate at temperatures below 10 C eliminates the need to handle gaseous chlorine; its raw material cost are low and inexpensive carbon can be used for the chlorine electrode. This system has the best chance to replace lead-acid. Exotic alkali metal batteries are deemed too costly at the present stage of development.

Schwartz, H. J.↗
NASA NTRS1974

Review of available synchronization and time distribution techniques

The methods of synchronizing precision clocks will be reviewed placing particular attention to the simpler techniques, their accuracies, and the approximate cost of equipment. The more exotic methods of synchronization are discussed in lesser detail. The synchronization techniques that will be covered will include satellite dissemination, communication and navigation transmissions via VLF, LF, HF, UHF and microwave as well as commercial and armed forces television. Portable clock trips will also be discussed.

Hall, R. G.↗