Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRIMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Microstructure and magnetic properties of electrospun one-dimensional Al{sup 3+}-substituted SrFe{sub 12}O{sub 19} nanofibers

SrAl{sub x}Fe{sub 12-x}O{sub 19} (x=0-3.0) nanofibers with diameters about 100 nm have been prepared by electrospinning and subsequent heat treatment. With Al{sup 3+} ion content ranging from 0 to 3.0, the lattice parameters decrease due to Fe{sup 3+} ions substituted by smaller Al{sup 3+} ions and the average grain size calculated by the Scherrer's equation reduces from 65 to 37 nm. The magnetization shows a continuous reduction with the Al content and its value measured at 77 K is higher than at room temperature, which can be explained by Bloch's law. For the coercivity, its value initially increases, reaching a maximum value of 617 (298 K) and 547 kA m{sup -1} (77 K) at x=2.0, and then reduces with the Al content further increase largely arising from the substituted Al{sup 3+} ion arrangement in different interstitial sites of the strontium ferrite unit cell. -- Graphical abstract: Al{sup 3+} ions substituted strontium ferrite nanofibers have been prepared by the electrospinning with a diameter of about 100 nm and the Al{sup 3+} ion substitution has a great effect on the microstructure and magnetic property of SrAl{sub x}Fe{sub 12-x}O{sub 19} nanofibers. Display Omitted Research highlights: {yields} SrAl{sub x}Fe{sub 12-x}O{sub 19} nanofibers have been fabricated by the electrospinning. {yields} There is a relation between the Al{sup 3+} ions substitution and microstructure. {yields} The magnetic property can be tuned effectively by Al{sup 3+} ion substitution. {yields} The magnetic property is influenced by measurement temperature.

36 MATERIALS SCIENCE↗

Size selected synthesis of CoFe{sub 2}O{sub 4} nanoparticles prepared in a chitosan matrix

In this paper we report the synthesis and magnetic properties of CoFe{sub 2}O{sub 4} nanoparticles. The nanoparticles with sizes ranging from 6 to 20 nm were prepared in a chitosan matrix. Size selection was achieved by introducing a nonionic surfactant Tween-X, where X={l_brace}20, 60, 80, and 85{r_brace}. Aqueous dispersions of Tween-X show micelles with increasing hydrodynamic sizes as X increases. Moessbauer spectroscopy measurements at 300 K show superparamagnetic behavior for the small particles, changing gradually to a blocked magnetic regime as the particle size increases. Magnetization measurements at 300 K show increasing values for the ratio M{sub r}/M{sub Hmax} and coercive fields (H{sub c}).

36 MATERIALS SCIENCE↗

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} thin films prepared by a low temperature process

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} (BFO) thin films have been deposited on platinized silicon substrates by a low temperature process combining rf magnetron sputtering at room temperature and postdeposition annealing at 450 deg. C. A nearly pure tetragonal crystal structure with highly (201)-preferred orientation, determined by x-ray diffraction, was formed in the BFO thin film. The BFO film not only exhibits high dielectric permittivity ({epsilon}{sub r}=113) and relatively low loss tangent (tan {delta}=0.012), but also shows a fairly small quadratic voltage coefficient of capacitance ({alpha}{approx}800 ppm/V{sup 2}) and a small temperature coefficient of capacitance ({alpha}{sub T{approx}}790 ppm/deg. C). Moreover, the leakage current density, obeying the Fowler-Nordheim tunneling mechanism, remains at a reasonably low level with the increase in applied electric field (J{approx}10{sup -6}-10{sup -4} A/cm{sup 2} under E=400 kV/cm). These attractive dielectric and electrical properties make the low temperature processed Bi{sub 24}Fe{sub 2}O{sub 39} thin film a promising candidate for high-k dielectric applications in silicon-based integrated circuits.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of NiZn-ferrite thin films prepared by radio frequency magnetron sputtering

Polycrystalline NiZn-ferrite thin films were deposited on Si(100) substrate by rf magnetron sputtering, using targets with a nominal composition of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}. The effects of substrate condition, sputtering pressure, and postannealing on the structure and magnetic properties of thin films have been investigated. Our results show that the preferred orientation of the NiZn spinel film changed from (311) to (400) with increasing the Ar pressure from 0.8 to 1.6 Pa, meanwhile, the grain size also increased. Atomic force microscopy analysis indicates that perfect surface morphology of the film can be obtained at a relatively lower sputtering pressure of 1.0 Pa. The relative percentage of residual oxygen increases significantly on a condition of lower sputtering pressure, and plays an important role in film structure due to the strong molecular adsorption tendency of oxygen on the film surface during the deposition process. A thin film with a typical thickness of 1 {mu}m, a saturation magnetization of 150 emu/cm{sup 3}, and a coercivity of 8.8 kA/m has been obtained after annealing at 800 deg. C, which has the potential application in magnetic integrated circuits.

36 MATERIALS SCIENCE↗

A strong magneto-optical activity in rare-earth La{sup 3+} substituted M-type strontium ferrites

M-type strontium ferrites with substitution of Sr{sup 2+} by rare-earth La{sup 3+} were prepared by conventional ceramic technology. The structure, magnetic properties, and magneto-optical Kerr activity of Sr{sub 1-x}La{sub x}Fe{sub 12}O{sub 19} (x = 0, 0.05, 0.10, 0.15, 0.20) were investigated by x-ray diffraction (XRD), vibrating sample magnetometer (VSM), and magneto-optical ellipsometry, respectively. X-ray diffraction showed that the samples sintered at 1290 deg. C for 3 h were single M-type hexagonal ferrites. The magnetic properties were remarkably changed due to the valence change of Fe ions induced by the substitution of La ions. Most significantly, an important magneto-optical activity was induced in the La{sup 3+} substituted M-type strontium ferrites around 3 eV.

36 MATERIALS SCIENCE↗

Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites

Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (T, pO{sub 2}) necessary to obtain the desired phase and stoichiometry. These methods have been evaluated for nanometric titanium ferrites. Two phenomena have been observed during the reducing process: the precipitation of a rhombohedral phase and a significant grain growth linked together. - Graphical abstract: XRD patterns of Fe{sub 3(1-{delta})}O{sub 4} nanometric powders obtained in situ during a reducing treatment. The stoichiometric compound was obtained by a thermal annealing at 460 deg. C under pO{sub 2}=3x10{sup -26} Pa ({Phi}{sub DRX}=100 nm). In inset, data of the experimental lattice parameter compared to the theoretical one. {alpha} represents the rhomboedrical phase which precipitates during this thermal treatment, then disappeared. Highlights: > The control of the deviation from oxygen stoichiometry is rarely consider in literature. > At the nanometric scale, it is necessary to develop synthesis routes under appropriate atmosphere. > These synthesis must be coupled with in situ characterization tools. > It opens the door to fast and precise studies concerning the evolution of nanometric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced photoelectrochemical activity for Cu and Ti doped hematite: The first principles calculations

To improve photoelectrochemical (PEC) activity of hematite, the modification of energy band by doping 3d transition metal ions Cu and Ti into {alpha}-Fe{sub 2}O{sub 3} were studied via the first-principles calculations with density function theory (DFT)+U method. The results show that the band gap of hematite is {approx}2.1 eV and n-type dopant Ti improves the electric conductivity, confirmed by recent experiments. The p-type dopant Cu enhances the utilization ratio of solar energy, shifts both valance, and conduction band edges to a higher energy level, satisfying hydrogen production in the visible light driven PEC water splitting without voltage bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of the butterfly-shaped magnetoresistance in reactive sputtered epitaxial Fe{sub 3}O{sub 4} films

Epitaxial Fe{sub 3}O{sub 4} thin films were synthesized by facing-target reactive sputtering Fe targets. The epitaxy of the Fe{sub 3}O{sub 4} film on MgO (100) was examined macroscopically using x-ray diffraction, including conventional theta-2theta scan, tilting 2theta scan, phi scan, and pole figure. The observed low-field butterfly-shaped magnetoresistance (MR) are explained by the primary fast rotation of the spins far away from antiphase boundaries and the high-field MR changing linearly with magnetic field can be understood by the gradual rotation of the spins near the antiphase boundaries. It is magnetocrystalline anisotropy that causes an increase in MR below Verwey transition temperature.

36 MATERIALS SCIENCE↗

Electrical Characteristics CuFe{sub 2}O{sub 4} Thick Film Ceramics Made with Different Screen Size Utilizing Fe{sub 2}O{sub 3} Nanopowder Derived from Yarosite for NTC Thermistor

Fabrication of CuFe{sub 2}O{sub 4} thick film ceramics utilizing Fe{sub 2}O{sub 3} derived from yarosite using screen printing technique for NTC thermistor has been carried out. Effect of thickness variation due to different size of screen (screen 225; 300 and 375 mesh) has been studied. X-ray diffraction analyses (XRD) was done to know crystal structure and phases formation. SEM analyses was carried out to know microstructure of the films. Electrical properties characterization was done through measurement of electrical resistance at various temperatures (room temperature to 100 deg. C). The XRD data showed that the films crystalize in tetragonal spinel. The SEM images showed that the screen with the smaller of the hole size, made the grain size was bigger. Electrical data showed that the larger the screen different size thickness variation (mesh), the larger the resistance, thermistor constant and sensitivity. From the electrical characteristics data, it was known that the electrical characteristics of the CuFe{sub 2}O{sub 4} thick film ceramics followed the NTC characteristic. The value of B and R{sub RT} of the produced CuFe{sub 2}O{sub 4} ceramics namely B = 3241-3484 K and R{sub RT} = 25.6-87.0 M Ohm, fitted market requirement.

36 MATERIALS SCIENCE↗

Site-specific electronic configurations of Fe 3d states by energy loss by channeled electrons

Site-specific configurations of Fe 3d electrons in a spinel ferrite were investigated by electron energy loss spectroscopy under electron channeling conditions. Site-specific spectra were extracted by applying a multivariate curve resolution (MCR) technique to the data set. An electronic difference in the Fe sites caused by ligand field splitting of trivalent Fe was probed. This demonstrated the promise of site-specific valence and spin state analysis in spintronics applications of spinel ferrites.

36 MATERIALS SCIENCE↗

Effect of Sintering Temperature on Dielectric Properties of Iron Deficient Nickel-Ferrite

Nickel Ferrite among all the magneto ceramic materials have been studied very much due to its large number of applications. But there is a large scope of modification of its properties. Thus people still working on it for improvisation of its properties via compositional and structural modifications. Present paper reporting the preparation and characterization of iron deficient Nickel ferrite for different sintering temperature. Ferrite samples having the general formula NiFe1.98O{sub 4} were prepared using the standard ceramic method. The phase formation was confirmed by X-ray diffraction technique. The effect of sintering temperature on the electrical properties and resistivity was studied. The data shows that dielectric properties are highly dependent on the sintering temperature.

36 MATERIALS SCIENCE↗

Flux switching in multipath cores

Flux switching in multipath ferrimagnetic core materials - computational analyses for unloaded core, loaded core, core-diode-transistor binary counter, and loaded three-leg core

SWITCHING CIRCUIT↗

Modulating microstructure and magnetic properties of BaFe{sub 12}O{sub 19} thin films by using Pt and yttria stabilized zirconia underlayers

The c-axis oriented barium ferrite thin films were prepared by radio frequency magnetron sputtering on silicon substrates with a metal underlayer Pt (111) as well as an oxide underlayer yttria stabilized zirconia (YSZ). Microstructural studies (scanning electron microscopy, atomic force microscopy, and magnetic force microscopy) showed that the magnetic grains in BaM film have a strong relationship with the grains in the underlayer. The Pt underlayer is more effective in forming micrometer-sized and multidomain magnetic grains, which have high saturation magnetization but small coercivity and remanence of the BaM film. On the contrary, the YSZ underlayer is favorable to obtain nanometer-sized and monodomain magnetic grains, which lead to a slight decrease in saturation magnetization but dramatically increase coercivity and remanence of the BaM film. Hence, with careful selection of underlayer, it is feasible to obtain suitable magnetic grain size and domain structure of BaM films to satisfy special requirements.

36 MATERIALS SCIENCE↗

Growth and interface phase stability of barium hexaferrite films on SiC(0001)

We have studied interface phase stability of the BaFe{sub 12}O{sub 19} (BaM) thin films grown by molecular beam epitaxy on SiC(0001). The films were epitaxially grown with the following crystallographic relation: BaM(0001) parallel SiC(0001) and BaM(11-20) parallel SiC(11-20). High resolution TEM reveals the existence of two interfacial bands with different structure than BaM. The first band close to SiC is SiO{sub x} while the second has spinel structure and chemically corresponds to Fe{sub 3}O{sub 4}. These findings suggest that at initial growth stages Fe{sub 3}O{sub 4} is more favorable than BaM. Density functional theory modeling of the phase stability of BaM compared to Fe{sub 3}O{sub 4} shows that BaM is only stable at high oxygen partial pressures.

36 MATERIALS SCIENCE↗

p-Type thermoelectric properties of the oxygen-deficient perovskite Ca{sub 2}Fe{sub 2}O{sub 5} in the brownmillerite structure

Brownmillerite calcium ferrite was synthesized in air at 1573 K and thermoelectric properties (direct current electrical conductivity {sigma}, Seebeck coefficient {alpha}, thermal conductivity {kappa}, thermal expansion {alpha}{sub L}) were measured from 373 to 1050 K in air. Seebeck coefficient was positive over all temperatures indicating conduction by holes, and electrical properties were continuous through the Pnma-Imma phase transition. Based on the thermopower and conductivity activation energies as well as estimated mobility, polaron hopping conduction was found to dominate charge transport. The low electrical conductivity, <1 S/cm, limits the power factor ({alpha}{sup 2{sigma}}), and thus the figure of merit for thermoelectric applications. The thermal conductivity values of {approx}2 W/mK and their similarity to Ruddlesden-Popper phase implies the potential of the alternating tetrahedral and octahedral layers to limit phonon propagation through brownmillerite structures. Bulk linear coefficient of thermal expansion ({approx}14x10{sup -6} K{sup -1}) was calculated from volume data based on high-temperature in situ X-ray powder diffraction, and shows the greatest expansion perpendicular to the alternating layers. - Graphical abstract: Representative microstructure of Ca{sub 2}Fe{sub 2}O{sub 5} samples used for thermoelectrical measurements.

36 MATERIALS SCIENCE↗

Spin injection from epitaxial Fe{sub 3}O{sub 4} films to ZnO films

The fully epitaxial Fe{sub 3}O{sub 4}/ZnO heterostructures were fabricated by reactive dc sputtering (Fe{sub 3}O{sub 4}) and rf sputtering (ZnO) on c-Al{sub 2}O{sub 3} substrates. The epitaxial relationship is verified to be Fe{sub 3}O{sub 4}(111)<110>(parallel sign)ZnO(0002)<1120> by {phi} scans. The nonlinear and rectifying properties of I-V curves were observed in the heterostructures. The transport mechanism across the interface between Fe{sub 3}O{sub 4} and ZnO is thermal emission and the Schottky barrier is calculated to be 0.51 eV. The magnetoresistance of the heterostructures is symmetric and depends on current. The spin polarization of the transport electrons from Fe{sub 3}O{sub 4} into ZnO is determined to be 28.5% at 30 K.

36 MATERIALS SCIENCE↗