Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ingeniously enhanced ferromagnetism in chemically-reduced 2D Ti 3 C 2 T X MXene

Chemical reduction is a facile and cost-effective technique for the modulation of the physical and chemical properties of nanomaterials. In this work, we demonstrate an enhancement of the magnetic behavior of Ti 3 C 2 T x MXene after its chemical reduction via l-ascorbic acid treatment. Small ferromagnetic loops have been observed below 50 K for Ti 3 C 2 T x prepared by hydrofluoric acid (HF) etching of Al layers from Ti 3 AlC 2 . Such a ferromagnetic ordering of spins was significantly enhanced via a chemical reduction of Ti 3 C 2 T x with l-ascorbic acid. Ferromagnetic hysteresis loops were observed for reduced Ti 3 C 2 T x (r-Ti 3 C 2 T x ) up to 150 K indicating a significant upshift of the paramagnetic to the ferromagnetic transition temperature, pushing towards room temperature. The enhancement of ferromagnetism and upshift of the ferromagnetic transition temperature could be attributed to the localized unpaired electron in Ti-3d orbital of the r-Ti 3 C 2 T x crystal and increase in the number of unsaturated Ti atoms upon l-ascorbic acid treatment. Chemical reduction via l-ascorbic acid treatment shows a promising pathway towards the modulation and enhancement of magnetism in various MXene materials for the development of 2D metallic soft ferromagnets and spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effects of Co Doping and Point Defect on the Ferromagnetism of ZnO

The effects of different doping proportions of Co doping and oxygen vacancies (V{sub O}) on the ferromagnetism of zinc oxide (ZnO) are controversial. To solve this problem, we investigated the effects of Co doping and point defects (V{sub O}, V{sub Zn}, H{sub i}, and Zn{sub i}) on the ferromagnetism of ZnO through first-principle calculations by using generalized gradient approximation + U (GGA + U) under density functional theory. Results show that the closer the distance between Co and vacancies (V{sub O} or V{sub Zn}), the lower the formation energy and the more stable the system will be. Co-doped ZnO with V{sub O} or V{sub Zn} exhibits long-range ordered ferromagnetism and Curie temperature above the room temperature. Especially, Co-doped ZnO with V{sub Zn} shows a half-metallic behavior, resulting in 100% conduction hole polarizability, which is highly beneficial for dilute magnetic semiconductors (DMSs) as a hole injection source. The ferromagnetism of Zn{sub 14}CoO{sub 16} is caused by the double exchange effects among the electrons of the O–2p, Co–3d, and Zn–3d orbits mediated by the hole carriers after complexes were formed by the Co doping and Zn vacancy. Similarly, the origin of ferromagnetism in Zn{sub 15}CoO{sub 15} is derived from the double exchange effects among the electrons of O–2p, Co–3d, and Zn–4s states mediated by the electron carriers after complexes were formed by the Co doping and O vacancy. In addition, the result shows that Co-doped ZnO with interstitial H (H{sub i}) or Zn (Zn{sub i}) is unfavorable for ferromagnetism and should be avoided experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

The exceedingly strong two-dimensional ferromagnetism in bi-atomic layer SrRuO 3 with a critical conduction transition

In recent years, few-layer or even monolayer ferromagnetic materials have drawn a great deal of attention due to the promising integration of two-dimensional (2D) magnets into next-generation spintronic devices. The SrRuO 3 monolayer is a rare example of stable 2D magnetism under ambient conditions, but only weak ferromagnetism or antiferromagnetism has been found. The bi-atomic layer SrRuO3 as another environmentally inert 2D magnetic system has been paid less attention heretofore. Here we study both the bi-atomic layer and monolayer SrRuO 3 in (SrRuO 3 ) n /(SrTiO 3 ) m (n = 1, 2) superlattices in which the SrTiO 3 serves as a non-magnetic and insulating space layer. Although the monolayer exhibits arguably weak ferromagnetism, we find that the bi-atomic layer exhibits exceedingly strong ferromagnetism with a T c of 125 K and a saturation magnetization of 1.2 μ B /Ru, demonstrated by both superconducting quantum interference device (SQUID) magnetometry and element-specific X-ray circular dichroism. Moreover, in the bi-atomic layer SrRuO 3 , we demonstrate that random fluctuations and orbital reconstructions inevitably occurring in the 2D limit are critical to the electrical transport, but are much less critical to the ferromagnetism. Our study demonstrates that the bi-atomic layer SrRuO 3 is an exceedingly strong 2D ferromagnetic oxide which has great potentials for applications of ultracompact spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Dynamics of MHD instabilities near a ferromagnetic wall

Prospective fusion component testing and DEMO power reactor concepts are expected to employ low-activation ferritic steels because of their ability to withstand the high neutron flux of the reactor environment. However, theory suggests that ferromagnetic material may amplify certain external MHD instabilities. Using its ferromagnetic-resistive wall mode (FRWM) upgrade, the High Beta Tokamak-Extended Pulse (HBT-EP) experiment has observed approximately doubled growth rates when operating with a close-fitting ferromagnetic first wall, compared to operation with a stainless steel first wall. The presence of a ferromagnetic wall correlates with earlier disruptions, and FRWM growth rates increase with decreasing mode rotation, as expected due to the increased skin depth allowing greater mode interaction with the bulk ferromagnetic material. It is also seen that introducing low-n asymmetries into the toroidal distribution of ferromagnetic material, similar to the ITER test blanket module toroidal asymmetry, changes the phase preference of rotating modes; meanwhile, a similar change in purely conducting material does not significantly change the mode's phase preference.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Discovery of intrinsic ferromagnetism in two-dimensional van der Waals crystals

The realization of long-range ferromagnetic order in two-dimensional van der Waals crystals, combined with their rich electronic and optical properties, could lead to new magnetic, magnetoelectric and magneto-optic applications1,2,3,4. In two-dimensional systems, the long-range magnetic order is strongly suppressed by thermal fluctuations, according to the Mermin–Wagner theorem5; however, these thermal fluctuations can be counteracted by magnetic anisotropy. Previous efforts, based on defect and composition engineering6,7,8,9,10, or the proximity effect, introduced magnetic responses only locally or extrinsically. Here we report intrinsic long-range ferromagnetic order in pristine Cr2Ge2Te6 atomic layers, as revealed by scanning magneto-optic Kerr microscopy. In this magnetically soft, two-dimensional van der Waals ferromagnet, we achieve unprecedented control of the transition temperature (between ferromagnetic and paramagnetic states) using very small fields (smaller than 0.3 tesla). This result is in contrast to the insensitivity of the transition temperature to magnetic fields in the three-dimensional regime. We found that the small applied field leads to an effective anisotropy that is much greater than the near-zero magnetocrystalline anisotropy, opening up a large spin-wave excitation gap. We explain the observed phenomenon using renormalized spin-wave theory and conclude that the unusual field dependence of the transition temperature is a hallmark of soft, two-dimensional ferromagnetic van der Waals crystals. Cr2Ge2Te6 is a nearly ideal two-dimensional Heisenberg ferromagnet and so will be useful for studying fundamental spin behaviours, opening the door to exploring new applications such as ultra-compact spintronics.

Gong, Cheng↗
DOE OSTI2018

Ambipolar ferromagnetism by electrostatic doping of a manganite

Complex-oxide materials exhibit physical properties that involve the interplay of charge and spin degrees of freedom. However, an ambipolar oxide that is able to exhibit both electron-doped and hole-doped ferromagnetism in the same material has proved elusive. Here we report ambipolar ferromagnetism in LaMnO 3 , with electron-hole asymmetry of the ferromagnetic order. Starting from an undoped atomically thin LaMnO 3 film, we electrostatically dope the material with electrons or holes according to the polarity of a voltage applied across an ionic liquid gate. Magnetotransport characterization reveals that an increase of either electron-doping or hole-doping induced ferromagnetic order in this antiferromagnetic compound, and leads to an insulator-to-metal transition with colossal magnetoresistance showing electron-hole asymmetry. These findings are supported by density functional theory calculations, showing that strengthening of the inter-plane ferromagnetic exchange interaction is the origin of the ambipolar ferromagnetism. The result raises the prospect of exploiting ambipolar magnetic functionality in strongly correlated electron systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sensitivity Analysis and Control of Induction Cooktop for Non-Ferromagnetic Cookware

All metal induction cooktop has the potential to enable heating of both ferromagnetic and non-ferromagnetic cookware. Compared to ferromagnetic cookware, the performance of an induction cooktop with non-ferromagnetic cookware is impacted significantly by the cookware misalignment. A detailed sensitivity analysis to the cookware misalignment for non-ferromagnetic cookware is studied in this paper. Based on the analysis, a control architecture is presented which ensures desired power transfer to the non-ferromagnetic cookware and zero voltage turn on of the high frequency inverter irrespective of cookware misalignment. Results are presented to verify the analysis and proposed control strategy.

Mukherjee, Subho [ORNL] (ORCID:0009000672297925)↗
DOE OSTI2023

Strategies to perform magnetization reversals in ferromagnets

Systems and methods for reversing a magnetization in a ferromagnet include a nanometer-scale cylindrical ferromagnetic sample having a height to diameter aspect ratio on the order of 2 or greater. A temporally-varying external field comprising an r.f. Pi pulse is applied to the ferromagnetic sample to cause a precession magnetization vector inclined at an angle with respect to the longest axis of the ferromagnetic sample to continuously rotate around the longest axis. One or more parameters of the temporally-varying external field is continuously adjusted based on at least magnetization dynamics of the ferromagnetic sample and/or an angular dependence of a precession frequency of the ferromagnetic sample.

Ketterson, John B.↗
DOE OSTI2023

Electronic Structure of Above-Room-Temperature van der Waals Ferromagnet Fe 3 GaTe 2

Fe 3 GaTe 2 , a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($T$ C ). In this study, we reveal the electronic structure of Fe 3 GaTe 2 in its ferromagnetic ground state using angle-resolved photoemission spectroscopy and density functional theory calculations. Our results establish a consistent correspondence between the measured band structure and theoretical calculations, underscoring the significant contributions of the Heisenberg exchange interaction ($J$ ex ) and magnetic anisotropy energy to the development of the high-$T$ C ferromagnetic ordering in Fe 3 GaTe 2 . Intriguingly, we observe substantial modifications to these crucial driving factors through doping, which we attribute to alterations in multiple spin-splitting bands near the Fermi level. In conclusion, these findings provide valuable insights into the underlying electronic structure and its correlation with the emergence of high-$T$ C ferromagnetic ordering in Fe 3 GaTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced Ferromagnetism in Atomically Thin Oxides Achieved by Interfacial Reconstruction

Discoveries of ferromagnetic materials with ultrathin thickness are of great importance for both fundamental science and technological applications. Transition metal oxides (TMOs) provide promising candidates in the context of next‐generation spintronics, despite the severe decay of ferromagnetism as the thickness reduces to the nanometer regime. Here, in this work, an efficient strategy to eliminate the magnetic dead layer in atomically thin oxides is presented, by using the epitaxial interface of 3 d and 5 d oxide monolayers that reconciles both strong exchange interaction and large uniaxial magnetic anisotropy. Combining multiple experimental methods, a ferromagnetic transition in an ultrathin oxide heterostructure comprised of only one La 0.2 Sr 0.8 MnO 3 monolayer sandwiched by SrIrO 3 monolayer (total thickness of three unit‐cells) is unambiguously demonstrated. Remarkably, a largely enhanced saturation magnetization (2 µ B Mn −1 ) and Curie temperature (80 K) are observed for the single manganite monolayer, as compared to previously reported ferromagnetic monolayer oxides. The results demonstrate a general strategy for creating robust ferromagnetism in ultrathin TMOs, potentially enabling novel oxide spin‐orbitronic devices.

2D ferromagnetism↗
DOE OSTI2018

The Electronic Structures and Ferromagnetism of Cu-Doped ZnO: the First-Principle Calculation Study

We have carried out first-principle spin-polarized calculations to investigate the electronic structures and the magnetic properties of Cu-doped wurtzite ZnO. It was found that the Cu{sub Zn} substitution can introduce 1 μ{sub B} local magnetic moment into the doped system, whereas the ferromagnetic coupling between Cu{sub Zn}s is so weak that the system cannot keep ferromagnetism at higher temperature. In Zn vacancy (V{sub Zn}) and Cu{sub Zn} coexisted system, Cu is in the Cu {sup 2+}/Cu {sup 3+} mixed valence under the influence of acceptor defect V{sub Zn}. Cu-3d electrons couple with O(around V{sub Zn})-sp electrons and then form Cu{sup 2+} −V{sub Zn} −Cu{sup 2+} or Cu{sup 2+} −VZn−−Cu{sup 3+} bound magnetic polaron (BMP) in the range of 1.27 ∼ 1.90 nm. The overlapping between BMPs is the main ferromagnetism origin of ZnO/Cu. According to our analysis, we thought that ZnO/Cu system will display stronger ferromagnetism when the Cu concentration attains 3% in atomic percentage. The calculated results and analysis will shed light on the origin of ferromagnetism in ZnO/Cu.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Remanent Magnetic Flux Distribution in Superconducting-Ferromagnetic Layered Heterostructures

Stacks of superconducting tape, made of second-generation coated conductors, present an interesting alternative to bulk superconductors. The layered geometry allows incorporation of other functional, namely ferromagnetic, materials. The ferromagnetic material changes the field configuration within the superconductor and can be used to shape or divert the flux density from its interior. This can be used to optimise the remanent flux density after magnetisation. FEM simulations are employed to test the performance of a variety of superconductor/ferromagnet structures and explain the role of the ferromagnetic material in the composite structure. Cases where trapped field is much higher and lower than remanent magnetisation of the ferromagnetic material are considered, showing that performance can be enhanced or maintained by using ferromagnetic material while reducing the usage of costly superconducting tape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Terahertz inverse spin Hall effect in spintronic nanostructures with various ferromagnetic materials

Bilayers of ferromagnetic and heavy metal nanolayers excited with femtosecond laser pulses emit subpicosecond bursts of electromagnetic radiation with spectral frequencies up to several THz. We fabricated such spintronic THz emitters containing various ferromagnetic materials with vastly different magnetic remanence, saturation magnetization, and coercive fields. In all cases, the THz amplitude versus magnetic-field dependence follows the independently measured magnetization hysteresis loops and the THz polarization direction is perpendicular to the sample’s magnetization M, both consistent with the inverse spin Hall effect (ISHE) as the physical origin. The mV-level signals of observed THz transient also favor the ISHE over the anomalous Nernst effect (ANE). The M(T) variation governs the temperature dependence of the THz generation. Emitters with weakly remanent ferromagnets are magnetic-field tunable, while moderately and strongly remanent ferromagnets, once magnetized, allow intense THz generation even without an external field, nevertheless exhibiting low susceptibility to magnetic perturbations if the hysteresis loop is square. Hence, exploiting the magnetic properties of the ferromagnetic layer enables tailoring of weakly temperature-dependent spintronic THz emitters. Finally, we explored the applicability of perovskite oxide materials such as La-Sr-Mn-O (LSMO) for THz transient generation. We detected weak (<40-μV amplitude) THz emissions from both LSMO/Au and pure LSMO nanostructures with no sign flip upon the sample reversal. Furthermore, we excluded the ISHE and believe it was likely governed by the ANE in the thick-film regime, although we cannot exclude the transient demagnetization mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Identifying the sources of ferromagnetism in sol-gel synthesized Zn{sub 1−x}Co{sub x}O (0≤x≤0.10) nanoparticles

We have carefully investigated the structural, optical and electronic properties and related them with changes in the magnetism of sol-gel synthesized Zn{sub 1−x}Co{sub x}O (0≤x≤0.10) nanoparticles. Samples with x≤0.05 were free of spurious phases. Samples with x≤0.03 were found to be with only high spin Co{sup 2+} ions into ZnO structure, whereas sample with x=0.05, exhibited the presence of high spin Co{sup 2+} and low spin Co{sup 3+}. We found that the intensity of the main EPR peak associated with Co{sup 2+} varies with the nominal Co content in a similar manner as the saturation magnetization and coercive field do. These results point out that the ferromagnetism in these samples should directly be correlated with the presence of divalent cobalt ions. Bound magnetic polaron (BMP) model and the charge transfer model are insufficient to explain the ferromagnetic properties of Zn{sub 1−x}Co{sub x}O nanoparticles. The room temperature ferromagnetism (RTFM) may be originated from a combination of several factors such as the interaction of high spin Co{sup 2+} ions, perturbation/alteration and/or changes in the electronic structure of ZnO close to the valence band edge and grain boundary effects. - Graphical abstract: The intensity of the main EPR peak associated with Co{sup 2+} varies with the nominal Co content in a similar manner as the saturation magnetization and coercive field do. These results point out that the ferromagnetism in these samples should directly be correlated with the presence of Co{sup 2+} ions. Display Omitted - Highlights: • Systematic and carefully study of physical-chemical properties of Zn{sub 1−x}Co{sub x}O nanoparticles. • Samples with x=0.01 and 0.03 were found to be with only high spin Co{sup 2+}. • Sample with x=0.05, exhibited the presence of high spin Co{sup 2+} and low spin Co{sup 3+}. • The BMP and charge transfer models seem not explain the ferromagnetic properties. • RTFM: high spin Co{sup 2+} ions, defects close to the valence band and grain boundary effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Amorphous nonstoichiometric oxides with tunable room-temperature ferromagnetism and electrical transport

Material functionalities strongly depend on the stoichiometry, crystal structure, and homogeneity. Here we demonstrate an approach of amorphous nonstoichiometric inhomogeneous oxides to realize tunable ferromagnetism and electrical transport at room temperature. In order to verify the origin of the ferromagnetism, we employed a series of structural, chemical, and electronic state characterizations. Combined with electron microscopy and transport measurements, synchrotron-based grazing incident wide angle X-ray scattering, soft X-ray absorption and circular dichroism clearly reveal that the room-temperature ferromagnetism originates from the In 0.23 Co 0.77 O 1-v amorphous phase with a large tunable range of oxygen vacancies. The room-temperature ferromagnetism is tunable from a high saturation magnetization of 500 emu cm -3 to below 25 emu cm -3 , with the evolving electrical resistivity from 5 × 10 3 μΩ cm to above 2.5 × 10 5 μΩ cm. Inhomogeneous nano-crystallization emerges with decreasing oxygen vacancies, driving the system towards non-ferromagnetism and insulating regime. Our work unfolds the novel functionalities of amorphous nonstoichiometric inhomogeneous oxides, which opens up new opportunities for developing spintronic materials with superior magnetic and transport properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

In Situ Local Imaging of Ferromagnetism and Superconductivity in RbEuFe 4 As 4

The coexistence of superconductivity and ferromagnetism is an intrinsically interesting research focus in condensed matter physics but the study is limited by low superconducting (T c ) and magnetic (T m ) transition temperatures in related materials. Here, we used a scanning superconducting quantum interference device to image the in-situ diamagnetic and ferromagnetic responses of RbEuFe 4 As 4 with high T c and T m . We observed significant suppression of superfluid density in vicinity of the magnetic phase transition, signifying fluctuation-enhanced magnetic scatterings between Eu spins and Fe 3d conduction electrons. Intriguingly, we observed multiple ferromagnetic domains which should be absent in an ideal magnetic helical phase. The formation of these domains demonstrates a weak c-axis ferromagnetic component probably arising from Eu spin-canting effect, indicative of possible superconductivity-driven domain Meissner and domain vortex-antivortex phases as revealed in EuFe 2 (As 0.79 P 0.21 ) 2 . Finally, our observations highlight RbEuFe 4 As 4 is a unique system which includes multiple interplay channels between superconductivity and ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Critical current oscillations of elliptical Josephson junctions with single-domain ferromagnetic layers

We report that josephson junctions containing ferromagnetic layers are of considerable interest for the development of practical cryogenic memory and superconducting qubits. Such junctions exhibit a ground-state phase shift of π for certain ranges of ferromagnetic layer thicknesses. We present studies of Nb based micron-scale elliptically shaped Josephson junctions containing ferromagnetic barriers of Ni 81 Fe 19 or Ni 65 Fe 15 Co 20 . By applying an external magnetic field, the critical current of the junctions is found to follow characteristic Fraunhofer patterns and display sharp switching behavior suggestive of single-domain magnets. The high quality of the Fraunhofer patterns enables us to extract the maximum value of the critical current even when the peak is shifted significantly outside the range of the data due to the magnetic moment of the ferromagnetic layer. The maximum value of the critical current oscillates as a function of the ferromagnetic barrier thickness, indicating transitions in the phase difference across the junction between values of zero and π. Lastly, we compare the data to previous work and to models of the 0-π transitions based on existing theories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unusual Ferromagnetic Band Evolution and High Curie Temperature in Monolayer 1T‐CrTe2 on Bilayer Graphene

2D van der Waals ferromagnets hold immense promise for spintronic applications due to their controllability and versatility. Despite their significance, the realization and in-depth characterization of ferromagnetic materials in atomically thin single layers, close to the true 2D limit, has been scarce. Here, a successful synthesis of monolayer (ML) 1T-CrTe2 is reported on a bilayer graphene (BLG) substrate via molecular beam epitaxy. Using angle-resolved photoemission spectroscopy and magneto-optical Kerr effect measurements, that the ferromagnetic transition is observed at the Curie temperature (TC) of 150 K in ML 1T-CrTe2 on BLG, accompanied by unconventional temperature-dependent band evolutions. The spectroscopic analysis and first-principle calculations reveal that the ferromagnetism may arise from Goodenough-Kanamori super-exchange and double-exchange interactions, enhanced by the lattice distortion and the electron doping from the BLG substrate. These findings provide pivotal insight into the fundamental understanding of mechanisms governing 2D ferromagnetism and offer a pathway for engineering higher TC in 2D materials for future spintronic devices.

Park, Kyoungree↗