SEARCH · Search NASA

Results for “FLOATS - COMPARISON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2023

1:70-Scale Model Testing of the Reference OpenSource Controller (ROSCO) on the IEA-Wind 15MW Reference Wind Turbine Including Floating Feedback: Preprint

This paper presents results from the Floating Offshore-wind Controls Advanced Laboratory (FOCAL) Experimental campaign performed at the University of Maine's (UMaine's) Harold Alfond Wind/Wave Ocean Engineering Laboratory (W2). The project involves four Froude-scaled test campaigns considering the International Energy Agency (IEA) Wind 15MW Reference Wind Turbine deployed on the VolturnUS-S semi-submersible platform with tuned-mass damper (TMD) elements in the hull. The turbine employs real-time rotor torque and blade pitch control through the Reference OpenSource Controller (ROSCO), including the additional control strategies of ROSCO's thrust peak shaving and a floating feedback control loop. Results with the floating feedback control are considered in this paper and show a significant reduction in platform pitch motion and loads around the platform pitch natural frequency with minimal negative impact of rotor power quality.

controls↗

DOE OSTI2023

Experimental investigation of advanced turbine control strategies and load-mitigation measures with a model-scale floating offshore wind turbine system

To advance the control co-design of offshore wind energy systems, the authors perform basin-scale experiments with a fully instrumented and actuated floating offshore wind turbine model. The model consists of a 1:70 scale performance-matched model of the International Energy Agency Wind Technology Collaboration Programme 15-MW reference turbine atop the VolturnUS-S semisubmersible platform. The Reference OpenSource Controller provides real-time blade pitch and generator torque control. Here we aim to develop an open data set for the validation of numerical models in predicting the influence of turbine control and load-mitigation measures. For this purpose, we measure the effects of advanced turbine control features, including peak shaving and floating feedback as well as hull-based control using tuned mass dampers on the system. Overall, the results demonstrate measurable and consistent influences from the control and load-mitigation measures, thus confirming the usefulness as a validation data set. Peak shaving attenuates the response to wind turbulence at near-rated wind speed. Floating feedback reduces the load and platform pitch motion associated with the negative damping induced by blade pitch control. The tuned mass dampers also attenuate the system response near the targeted frequencies under suitable conditions. We also identify detrimental side effects of each load-mitigation measure.

17 WIND ENERGY↗

DOE OSTI2022

Microgap breakdown with floating metal rod perturbations

Here, we report the characterization of microgap breakdown with perturbations from a metal rod floating between anode and cathode electrodes. The effects of the metal rod on the electric field distribution and the field enhancement factor are evaluated by numerical simulation and the conformal mapping method, and they indicate that the field emission regime is not reached. The breakdown voltages in the Townsend discharge regime are determined based on the voltage–current characteristics, which are obtained from two-dimensional fluid simulations. It is found that the breakdown characteristics can be significantly modulated by the floating metal rod, and the breakdown curve (breakdown voltage vs the net gap distance) is no longer U-shaped, which deviates from the conventional Paschen's law. The underlying physical mechanisms are related to the electric field enhancement, curved breakdown path, and nonuniform ion flux caused by the electric shielding effect. The results provide insights into breakdown characteristics in microscale discharges, which may promote conventional investigation of simplified clean gaps toward more complex conditions (e.g., with floating microparticles) in miniaturized plasma devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Impacts of floating-point non-associativity on reproducibility for HPC and deep learning applications

Run to run variability in parallel programs caused by floating-point non-associativity has been known to significantly affect reproducibility in iterative algorithms, due to accumulating errors. Non-reproducibility can critically affect the efficiency and effectiveness of correctness testing for stochastic programs. Recently, the sensitivity of deep learning training and inference pipelines to floating-point non-associativity has been found to sometimes be extreme. It can prevent certification for commercial applications, accurate assessment of robustness and sensitivity, and bug detection. New approaches in scientific computing applications have coupled deep learning models with high-performance computing, leading to an aggravation of debugging and testing challenges. Here we perform an investigation of the statistical properties of floating-point non-associativity within modern parallel programming models, and analyze performance and productivity impacts of replacing atomic operations with deterministic alternatives on GPUs. We examine the recently-added deterministic options in PyTorch within the context of GPU deployment for deep learning, uncovering and quantifying the impacts of input parameters triggering run to run variability and reporting on the reliability and completeness of the documentation. Finally, we evaluate the strategy of exploiting automatic determinism that could be provided by deterministic hardware, using the Groq LPUTM accelerator for inference portions of the deep learning pipeline. We demonstrate the benefits that a hardware-based strategy can provide within reproducibility and correctness efforts.

Shanmugavelu, Sanjif↗

DOE OSTI2024

OpenFAST Modeling of the T-Omega Wind Floating Offshore Wind Turbine System

To reduce the cost of offshore wind energy through a more efficient design of the floating support structure, T-Omega Wind developed a novel lightweight and shallow-draft platform concept that aims to achieve a wave-following behavior without resonance amplification. The rotor and generator are carried by four tower legs with each leg supported by a shallow-draft float at the base. In preparation for a more detailed analysis, a coupled aero-hydro-elastic model of the proposed concept is developed in OpenFAST. The detailed modeling approach is presented, including a novel application of the SubDyn substructure dynamics module of OpenFAST to approximate the loads on the axle tube at the tower top from the rotor hub bearings. Preliminary results obtained with the OpenFAST model by rigidifying the substructure and blades indicate that the original sizing of the design can lead to large hub acceleration in the axial/surge and pitch directions due to platform-pitch motion. The high axial acceleration also potentially leads to large bending moments in the four tower legs. To address these issues, an updated design is developed with, among other changes, increased float spacing at the tower base and improved shear-transmitting geometry of the tower legs. The new design suggests significantly reduced extreme hub accelerations under the same conditions even with structural flexibility and will be further analyzed in the future through full aero-hydro-servo-elastic simulations.

FOWT↗

DOE OSTI2025

Floating photovoltaic power plants: A review of energy yield, reliability, and operation and maintenance

Photovoltaic (PV) systems are essential for the transition to sustainable energy, reducing fossil fuel dependence and mitigating climate change. Although PV requires minimal land area — PV can meet the European Union's energy needs using only 0.26% of its land — space for deployment is often scarce in densely populated regions. Floating photovoltaics (FPV) offer an effective solution to land-use challenges by installing PV systems on floating structures in water bodies. FPV is a growing niche within PV with a cumulative installed capacity reaching 7.7 GW globally by 2023. Almost 90% of the installed FPV capacity is in Asia, with close to 50% of in China alone, while the Netherlands and France are the largest markets outside Asia. FPV shows strong potential to support climate targets, but still faces challenges like regulatory barriers, cost competitiveness compared to ground-based PV (GPV), and uncertainties about environmental impacts and system reliability. FPV systems are currently installed mainly on sheltered inland waters, such as quarry lakes, irrigation ponds and reservoirs. FPV technical standards are still being developed. Guidelines have been published by the World Bank, DNV, and Solar Power Europe, and emerging national standards from South Korea, China, and Singapore address design, components, and safety. The International Electrotechnical Commission (IEC) is working on formal standards for floats, mooring systems, and electrical connectors. However, the published best practices lack quantitative guidance for yield modelling and reliability, which this report aims to address. It provides data-driven insights, models, and parameters essential for accurate energy yield, reliability, and maintenance predictions over FPV systems' lifetimes.

14 SOLAR ENERGY↗

DOE OSTI2024

Synergistic Integration of Multiple Wave Energy Converters with Adaptive Resonance and Offshore Floating Wind Turbines through Bayesian Optimization

We developed a synergistic ocean renewable system where an array of Wave Energy Converters (WEC) with adaptive resonance was collocated with a Floating Offshore Wind Turbine (FOWT) such that the WECs, capturing wave energy through the resonance adapting to varying irregular waves, consequently reduced FOWFT loads and turbine motions. Combining Surface-Riding WECs (SR-WEC) individually designed to feasibly relocate their natural frequency at the peak of the wave excitation spectrum for each sea state, and to obtain the highest capture width ratio at one of the frequent sea states for annual average power in a tens of kilowatts scale with a 15 MW FOWT based on a semi-submersible, Bayesian Optimization is implemented to determine the arrangement of WECs that minimize the annual representation of FOWT’s wave excitation spectra. The time-domain simulation of the system in the optimized arrangement is performed, including two sets of interactions: one set is the wind turbine dynamics, mooring lines, and floating body dynamics for FOWT, and the other set is the nonlinear power-take-off dynamics, linear mooring, and individual WECs’ floating body dynamics. Those two sets of interactions are further coupled through the hydrodynamics of diffraction and radiation. For sea states comprising Annual Energy Production, we investigate the capture width ratio of WECs, wave excitation on FOWT, and nacelle acceleration of the turbine compared to their single unit operations. We find that the optimally arranged SR-WECs reduce the wave excitation spectral area of FOWT by up to 60% and lower the turbine’s peak nacelle acceleration by nearly 44% in highly occurring sea states, while multiple WECs often produce more than the single operation, achieving adaptive resonance with a larger wave excitation spectra for those sea states. The synergistic system improves the total Annual Energy Production (AEP) by 1440 MWh, and we address which costs of Levelized Cost Of Energy (LCOE) can be reduced by the collocation.

Engineering↗

DOE OSTI2024

OpenFAST Modeling of the T-Omega Wind Floating Offshore Wind Turbine System

ENGINEERING,WIND ENERGY↗

DOE OSTI2024

OpenFAST Modeling of the T-Omega Wind Floating Offshore Wind Turbine System: Preprint

To reduce the cost of offshore wind energy through a more efficient design of the floating support structure, T-Omega Wind developed a novel lightweight and shallow-draft platform concept that aims to achieve a wave-following behavior without resonance amplification. The rotor and generator are carried by four tower legs with each leg supported by a shallow-draft float at the base. In preparation for a more detailed analysis, a coupled aero-hydro-elastic model of the proposed concept is developed in OpenFAST. The detailed modeling approach is presented, including a novel application of the SubDyn substructure dynamics module of OpenFAST to approximate the loads on the axle tube at the tower top from the rotor hub bearings. Preliminary results obtained with the OpenFAST model by rigidifying the substructure and blades indicate that the original sizing of the design can lead to large hub acceleration in the axial/surge direction and in the pitch direction due to platform-pitch motion. The high hub acceleration also potentially leads to large bending moments in the four tower legs. To address the issue identified, an updated design is developed with, among other changes, increased float spacing at the tower base and improved geometry of the tower legs. The new design suggests significantly reduced extreme platform pitch angles under the same conditions and will be further analyzed in the future through full aero-hydro-servo-elastic simulations.

FOWT↗

DOE OSTI2024

Dynamic Modelling of HiveWind Floating Wind Substructure in OpenFAST

Current aero-elastic modes tend to consider the wind turbine floating substructures as rigid. However, the new generation of offshore wind platforms are leaner, less rigid. The OpenFAST code has been updated to consider the flexibility of the floating substructure. This presentation shows how a numerical model of the HiveWind design was created within OpenFAST as well as some verifications performed. When comparing the flexible model to a simplified rigid model (previous state-of-the-art), there are some significant differences in key performance indicators. The new flexibility capability within OpenFAST allows to calculate ultimate and fatigue loads within the floating substructure, allowing for the development of more economical designs.

ENGINEERING,WIND ENERGY↗

DOE OSTI2025

Efficient Floating-Point Arithmetic on Fault-Tolerant Quantum Computers

We propose a novel floating-point encoding scheme that builds on prior work involving fixed-point encodings. We encode floating-point numbers using Two's Complement fixed-point mantissas and Two's Complement integral exponents. We used our proposed approach to develop quantum algorithms for fundamental arithmetic operations, such as bit-shifting, reciprocation, multiplication, and addition. We prototyped and investigated the performance of the floating-point encoding scheme on quantum computer simulations by performing reciprocation on randomly drawn inputs and by solving first-order ordinary differential equations, while varying the number of qubits in the encoding. We observed rapid convergence to the exact solutions as we increased the number of qubits and a significant reduction in the number of ancilla qubits required for reciprocation when compared with similar approaches.

Serrallés, José Cruz [Weill Cornell Med. Coll.]↗

DOE OSTI2026

One Man’s Pirate is Another Man’s . . . Nuclear Terrorist? Evaluating the Act of Piracy Against Floating Nuclear Power Plants on the High Seas

The lack of international consensus about whether a floating nuclear power plant is a facility or vessel presents an ambiguity about a pirate's status if they board a floating nuclear power plant, As piracy continues to be a concern for maritime security, the deployment of floating nuclear power plants (FNPPs) on the high seas raises questions about laws on piracy.

Fialkoff, Marc [Oak Ridge National Laboratory (ORN↗

DOE OSTI2025

Considerations for the Global Commercialization of Floating Offshore Wind Energy

Floating offshore wind (FOW) has the potential to unlock access to wind resources in deep water where fixed-bottom turbines are not feasible, enabling coastal regions around the world to meet growing energy demands. Although fixed-bottom offshore wind is commercially mature, FOW, which may be needed for water deeper than 60 m, must progress in multiple ways to reach full commercial viability. In this Perspective, we examine the status of the global FOW industry's commercial development across three key areas - technical innovation, industrialization and cross-cutting value. Technical innovation has enabled FOW turbines to perform as well as fixed-bottom turbines, with the promise of future cost reductions. However, the complex architecture of FOW turbines, combining floating structures with more than 8,000 electrical and mechanical parts in wind turbines, requires industrialization efforts such as standardization and supply-chain integration to enable commercial project deployment. FOW can potentially offer unique benefits, including reduced environmental impacts and strengthened economic development in coastal regions, through substantial regional economic activity. Successful coordination across these three areas could help to position FOW as a major contributor to a competitive, reliable and resilient global energy system.

17 WIND ENERGY↗

DOE OSTI2023

Deep neural operators can predict the real-time response of floating offshore structures under irregular waves

The use of neural operators in a digital twin model of an offshore floating structure holds the potential for a significant shift in the prediction of structural responses and health monitoring, offering valuable real-time control insights. In this work, we investigate the effectiveness of three neural operators, namely the deep operator network (DeepONet), the Fourier neural operator (FNO), and the Wavelet neural operator (WNO), to accurately capture the responses of a floating structure under six different sea state codes (3 − 8) based on the wave characteristics described by the World Meteorological Organization (WMO). To further enhance the accuracy of the vanilla architecture of the neural operators, novel extensions, such as wavelet-DeepONet and self-adaptive WNO, are proposed in this paper. The results demonstrate that these high-precision neural operators can deliver structural responses more efficiently, up to two orders of magnitude faster than a dynamic analysis using conventional numerical solvers. Additionally, compared to gated recurrent units (GRUs), a commonly used recurrent neural network for time-series estimation, neural operators are both more accurate and efficient, especially in situations with limited data availability. Taken together, our study shows that FNO outperforms all other operators for approximating the mapping of one input functional space to the output space as well as for responses that have small bandwidth of the frequency spectrum. Conversely, DeepONet, with historical states, proves most accurate in learning the mapping of multiple input functions to the output space and capturing responses within a broad frequency spectrum.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Aeroservoelastic Stability of a Floating Wind Turbine

The problem of negative damping undermines the aeroservoelastic stability of floating offshore wind turbines. The negative damping problem is most prevalent around rated wind speed, where the sensitivity of thrust to wind speed is the largest. This paper investigates the implementation of peak shaving, a controller feature that limits the rated thrust by pitching the blades before rated wind speed is reached. Two controller designs are investigated: a de-tuned controller and a nacelle-feedback controller. A time-domain metric is defined, inspired by Lyapunov theory, in order to compute and assess the stability of floating offshore wind turbines. The model of the International Energy Agency 15-MW reference wind turbine mounted on the University of Maine VolturnUS-S floater is simulated in HAWC2 with the National Renewable Energy Laboratory reference open-source controller. Peak shaving is applied to the two controller designs and stability is assessed. According to the chosen metric, peak shaving does not improve the stability of the system. This is due to the trade-off between loads and error tracking: although the loads and displacements in the fore-aft direction of the turbine are reduced, the rotor-speed tracking is poorer, which increases the shaft torsion fatigue load.

17 WIND ENERGY↗

DOE OSTI2024

Floating Wind Farm Layout Optimization Considering Moorings and Seabed Variations

This paper presents a method for optimizing the layout of floating wind farms that accounts for realistic seabed variations and the consequent adjustments to the mooring systems required for different turbine positions. The mooring lines of floating wind farms create large spatial constraints that are depth-dependent, since mooring designs must adapt to variations in seabed conditions over the array area. We develop a layout optimization methodology that addresses this, adjusting mooring system designs based on the local seabed characteristics as the layout changes and using steady-state models for the wake effects and mooring lines. The approach includes design algorithms that adjust the anchor positions and line length to achieve the desired mooring line profile for different water depths, and a layout optimization framework that implements spatial constraints between the turbines, mooring lines, and lease area boundaries. Demonstrating the method on several cases shows the effect of the seabed and spatial-constraint factors, as well as their interactions, on the optimal array layout. This demonstration paves the way for scaling up the method, using more powerful optimization algorithms to handle larger farm sizes and situations with more intensely varied seabed conditions.

17 WIND ENERGY↗

DOE OSTI2024

Control Co-Design Studies for a 22 MW Semisubmersible Floating Wind Turbine Platform

We present a control co-design software framework that can be used to optimize floating wind turbines and their controllers. Because this framework has many options for design variables, constraints, and merit figures, along with modeling fidelity levels, we seek to demonstrate best practices for using the tool while designing a floating platform for the new 22 MW offshore reference wind turbine developed within the International Energy Agency Wind Technology Commercialization Programme 55 on Reference Wind Turbines and Farms. During these studies, we evaluate the use of different simulation fidelity levels, the effect of using different load cases for controller tuning, and the difference between sequential and simultaneous control co-design solutions. Based on these efforts, we suggest using an algorithm that performs an initial search of the design space before optimization. We find that solving smaller optimization problems, in a sequential manner, leads to more reliable outcomes in fewer iterations than larger, simultaneous control co-design solutions. However a simultaneous CCD solution produces a platform with a 2% lower mass than the sequential CCD outcome.

17 WIND ENERGY↗

DOE OSTI2024

IEA Wind Task 49: Reference Site Conditions for Floating Wind Arrays

The commercial-scale deployment of floating offshore wind (FOW) projects is expected to take place in a diverse range of sites that may differ significantly from existing fixed-bottom projects. FOW farms are particularly sensitive to the water depth and the meteorological and oceanographic (metocean) and geotechnical conditions at the project site due to the wave-induced system motions and loads as well as the anchoring system constraints imposed by the seafloor conditions. Uncertainty around the site conditions will permeate through all aspects of project design, leading to suboptimal and overly conservative designs, increased costs, and adversely affected performance. As FOW expands into a global industry, metocean and geotechnical conditions will increasingly vary for projects located in different geographic regions or in far-from-shore, deep-water sites. This study represents the outputs of work package 1 of International Energy Agency Wind Task 49, which focuses on the integrated design of floating wind arrays. The primary goal of this study is to establish the type of parameters and constraints required to characterize FOW array reference sites; provide a realistic and publicly available set of reference site conditions to the FOW community as a baseline set of data for individual research projects; identify and categorize any critical gaps in the existing data or methodologies required to define reference site characteristics; and inform and support the design of reference FOW arrays. A building block concept was developed for synthesizing reference sites for the design of FOW arrays. The building blocks include three classes of site conditions focusing on the techno-economic design of FOW projects: metocean conditions, seabed conditions, and coastal infrastructure. All reference site data produced and collected in this study are publicly available.

17 WIND ENERGY↗