Search NASA⌕ Search

SEARCH · Search NASA

Results for “Federal Aviation Administration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

A Summary of Airframe Results from a Fokker F28 Full-Scale Crash Test

On June 20, 2019, a full-scale crash test was conducted on a Fokker F28 MK1000 aircraft as a part of a joint NASA / Federal Aviation Administration (FAA) research effort to investigate the crashworthiness characteristics of a Transport Category Aircraft (TCA), as defined by 14 Code of Federal Regulations, Part 25. The test was conducted at NASA Langley Research Center’s Landing and Impact Research Facility and was the third in a test series to further understand TCA crashworthiness characteristics. The test article featured 24 Anthropomorphic Test Devices (ATDs, a.k.a. crash test dummies), and over 700 channels of instrumentation covering major aircraft structures such as the wings, tail, nose, cockpit and cabin, along with recording seat, overhead bin and ATD accelerations. Five different U.S. Government agencies collaborated on the test including: NASA, the FAA, the U.S. Army Research Laboratory, the National Transportation Safety Board (NTSB) and the National Highway Traffic Safety Administration (NHTSA). This report will covertest article build up, which includes weight and balance measurements and pre-test laser scans. It will also cover the events of the test, which includes the test sequence of events and post-test damage inspections. Finally, it will show airframe level accelerations at all positions measured, with discussion on correlation to the airframe damage witnessed. The test build up consisted of outfitting the main cabin section of the aircraft with 24 ATDs seated in 12 rows of seats, overhead mass and the under floor cargo area with foam representing the luggage. The main cabin also included all of the onboard data system pallets, which recorded711 channels of data from the test. All major portions of the aircraft were instrumented, including locations at the floor / frame junction locations in the cabin where the ATDs were located along with other major exterior components such as the nose, the tail, each engine cowling, and at overhead hat rack ballast locations. The aircraft impacted a soil surface at65.3 ft/s horizontal and 31.8 ft/s vertical velocities. The aircraft plowed through the soil and slid a distance of 32.5 feet from the initial impact location. There was a secondary impact occurring 0.9 s due to the “slap down” of the nose during the post-impact response. The duration of the event from impact to rest was1.62 seconds. There was major structural damage in the lower fuselage areas around the Wingbox and Aft Fuselage sections. The Aft Fuselage section deformation caused some cabin intrusion from the keel beams pushing the aft cabin floor into the cabin. Other structural deformations occurred around the tail and at transition regions in the aircraft structure; mainly in locations of differing overall stiffness. The data obtained showed average vertical accelerations between 12 and 16 g with spikes reaching almost 40 g at certain floor locations. Average horizontal accelerations were approximately 10 g for all floor locations measured with spikes reaching approximately 25 g in some locations. The report includes a full set of results on aircraft deformation and accelerations along with discussions as to the effect on the aircraft structure.

Justin D Littell↗
NASA NTRS2021

Best Practices Identified Through the Completion of UAS Flight Demonstrations

After several years of research into Detect and Avoid (DAA) and Command and Control (C2) systems for Unmanned Aircraft Systems (UAS), the National Aeronautics and Space Administration’s (NASA) UAS Integration into the National Airspace System project initiated a focused two-year effort along with the Federal Aviation Administration (FAA) and three industry partners to investigate remaining issues in the specification, test, certification and airspace integration to allow UAS operations in non-segregated airspace. The approach taken had the industry partners propose a flight demonstration approximating a commercial operation, while NASA helped, as needed, the partners through design and test phases and NASA observed interactions with the FAA. During this effort NASA collected best practices intended to be of value to similar UAS endeavors. These best practices can be divided into different sets, including practices that describe the relationship between business considerations to UAS design or describe several UAS development challenges. Another set includes best practices focused on navigating the UAS design and type certification processes. A third set includes best practices that relate to the design of the DAA system. Deploying DAA systems in this timeframe posed unique challenges. Commercial off-the-shelf DAA systems do not exist, necessitating custom development and, for two of the partners, the use of low-size, -weight, and -power (SWaP) sensors not completely specified for DAA. A fourth set of best practices relates to lost-link contingency planning. The final set of best practices relates to the design and testing of C2 systems and obtaining spectrum licenses. The UAS demonstrations were piloted remotely, and for all aspects of flight safety, a C2 system was required to communicate DAA and other UAS subsystem data to the remote pilot and to allow the pilot to issue commands to the vehicle. Throughout the course of this effort, the partners integrated prototype DAA and C2 systems into unmanned aircraft, tested those systems, and laid the groundwork for type certification programs that are expected to continue.

NASA↗
NASA NTRS2016

Rationales for the Lightning Launch Commit Criteria

Since natural and triggered lightning are demonstrated hazards to launch vehicles, payloads, and spacecraft, NASA and the Department of Defense (DoD) follow the Lightning Launch Commit Criteria (LLCC) for launches from Federal Ranges. The LLCC were developed to prevent future instances of a rocket intercepting natural lightning or triggering a lightning flash during launch from a Federal Range. NASA and DoD utilize the Lightning Advisory Panel (LAP) to establish and develop robust rationale from which the criteria originate. The rationale document also contains appendices that provide additional scientific background, including detailed descriptions of the theory and observations behind the rationales. The LLCC in whole or part are used across the globe due to the rigor of the documented criteria and associated rationale. The Federal Aviation Administration (FAA) adopted the LLCC in 2006 for commercial space transportation and the criteria were codified in the FAA's Code of Federal Regulations (CFR) for Safety of an Expendable Launch Vehicle (Appendix G to 14 CFR Part 417, (G417)) and renamed Lightning Flight Commit Criteria in G417.

Lightning Advisory Panel↗
NASA NTRS1980

Development of SCR Aircraft takeoff and landing procedures for community noise abatement and their impact on flight safety

Piloted simulator studies to determine takeoff and landing procedures for a supersonic cruise transport concept that result in predicted community noise levels which meet current Federal Aviation Administration (FAA) standards are discussed. The results indicate that with the use of advanced procedures, the subject simulated aircraft meets the FAA traded noise levels during takeoff and landing utilizing average flight crew skills. The advanced takeoff procedures developed involved violating three of the current Federal Aviation Regulations (FAR) noise test conditions. These were: (1) thrust cutbacks at altitudes below 214 meters (700 ft); (2) thrust cutback level below those presently allowed; and (3) configuration change, other than raising the landing gear. It was not necessary to violate any FAR noise test conditions during landing approach. It was determined that the advanced procedures developed do not compromise flight safety. Automation of some of the aircraft functions reduced pilot workload, and the development of a simple head-up display to assist in the takeoff flight mode proved to be adequate.

Grantham, W. D.↗
NASA NTRS2020

UAM Vision Concept of Operations (ConOps) UAM Maturity Level (UML) 4

This Vision ConOps is intended as a foundation to engage members of the UAM community and provide a consensus on the future vision of UAM operations. It provides a concept for more detailed discussion and a basis for the exploration of ideas using a common framework to inform the continued development and integration of UAM as part of the broader transportation system. Advanced Air Mobility (AAM) encompasses a range of innovative aviation technologies (small drones, electric aircraft, automated air traffic management, etc.) that are transforming aviation’s role in everyday life, including the movement of goods and people. Urban Air Mobility (UAM) represents one of the most exciting and complex AAM concepts with highly automated aircraft, providing commercial services to the public over densely populated cities. This concept has generated tremendous interest and industry investment. UAM envisages a future in which advanced technologies and new operational procedures enable practical, cost-effective air travel as an integral mode of transportation in metropolitan areas. It represents one of the most exciting and complex AAM concepts with highly automated aircraft providing commercial services to the public over densely populated cities. For this reason, the National Aeronautics and Space Administration (NASA) selected UAM as the initial goal of its AAM efforts and the focus of this Vision Concept of Operations (ConOps) document. UAM Community Vision ConOps: This Vision ConOps effort was led by experts from NASA’s Aeronautics Research Mission Directorate (ARMD) in collaboration with the Federal Aviation Administration (FAA) and Deloitte’s Ecosystem Advisory Group (a cohort of advisers with aviation, aerospace, and regulatory expertise). To develop this Vision ConOps, NASA, FAA, and Deloitte built upon the current body of aeronautical research and consulted with more than 100 stakeholder organizations. This UAM community includes entities ranging from legacy aviation leaders to innovators and new market entrants. Stakeholders consulted included the federal government, state and local government, aerospace original equipment manufacturers (OEMs), local transportation organizations, prospective UAM operators, academia, industry standards-setting bodies, airports, service suppliers, and others (as described in Appendix G). This input was captured through the following methods: • A series of more than two dozen interviews with industry experts, federal regulators, state and local governments, and industry trade groups provided insight into the challenges of UAM integration into the National Airspace System (NAS), as well as technology developments and a variety of perspectives as to how UAM systems will integrate. • A series of two-day community workshops enabling active, detailed engagement of nearly 100 industry, academic, federal, and state stakeholder individuals. These workshops, hosted by NASA and Deloitte, explored UAM concepts in detail, and stakeholders were invited to collaboratively analyze and propose solutions to some of the greatest conceptual challenges behind UAM at an intermediate state. • A review of more than 160 sources of UAM literature from across government, industry, and academia, which are listed in Appendix H. • The public sharing of workshop input and document drafts for review and input across the UAM community. Feedback in the form of more than 1,000 comments and inputs on the document was received from industry groups, individual companies, academia, and government (federal, state, and local), among others. Although effort was made to incorporate inputs from across the UAM stakeholder group, not all comments could ultimately be incorporated in this version. The team resolved conflicting comments or ideas while maintaining consistency with the known direction of regulators and ensuring the document was coherent and consistent. It is recognized that this is a rapidly evolving area and that concepts will likely change over time; as such, this Vision ConOps is a living document and is expected to evolve as concepts mature. The ConOps does, however, provide a vision of UAM concepts and solutions based on the broad insights from across the UAM stakeholder community at the time of its publication and is intended to serve as a UAM North Star for continued research and development of UAM. As a broad Vision ConOps, is not a detailed engineering document; rather, it focuses primarily on outlining a broad, high-level vision across all aspects of a UAM transportation system.

Urban Air Mobility↗
NASA NTRS2018

UAS-NAS NASA 870 Ikhana UAS No Chase COA (NCC) Flights, Flight Test Report

This document is a flight test report from the operational perspective for the No Chase Certificate of Waiver or Authorization (COA) flights, or NCC flights, a major milestone of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. Discussions of a demonstration event began as early as 2014 and the actual flight of the Ikhana UAS into the NAS without a safety chase vehicle in Class A, E, and D airspace was accomplished on 12 June, 2018. The major goal of this flight was to demonstrate an alternate means of compliance to the see and avoid regulations for a UAS using Detect and Avoid (DAA) technology. Participants in this flight activity and planning included the National Aeronautics and Space Administration (NASA) Ames Research Center, NASA Armstrong Flight Research Center, General Atomics Aeronautical Systems, Inc. (GA-ASI), Honeywell International, Inc., and the Federal Aviation Administration (FAA).

Marston, Mike↗
NASA NTRS2012

Assessment of Damage Containment Features of a Full-Scale PRSEUS Fuselage Panel Through Test and Teardown

An area that shows promise in enhancing structural integrity of aircraft and aerospace structures is the integrally stitched composite technology. The most recent generation of this technology is the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept developed by Boeing Research and Technology and the National Aeronautics and Space Administration. A joint test program on the assessment of damage containment capabilities of the PRSEUS concept for curved fuselage structures was conducted recently at the Federal Aviation Administration William J. Hughes Technical Center. The panel was subjected to axial tension, internal pressure, and combined axial tension and internal pressure load conditions up to fracture, with a through-the-thickness, two-bay notch severing the central stiffener. For the purpose of future progressive failure analysis development and verification, extensive post failure nondestructive and teardown inspections were conducted. Detailed inspections were performed directly ahead of the notch tip where stable damage progression was observed. These examinations showed: 1) extensive delaminations developed ahead of the notch tip, 2) the extent and location of damage, 3) the typical damage mechanisms observed in composites, and 4) the role of stitching and warp-knitting in the failure mechanisms. The objective of this paper is to provide a summary of results from these posttest inspections.

Bergan, Andrew C.↗
NASA NTRS2018

Live Aircraft Encounter Visualization at FutureFlight Central

Researchers at the National Aeronautics and Space Administration (NASA) have developed an aircraft data streaming capability that can be used to visualize live aircraft in near real-time. During a joint Federal Aviation Administration (FAA)/NASA Airborne Collision Avoidance System flight series, test sorties between unmanned aircraft and manned intruder aircraft were shown in real-time at NASA Ames' FutureFlight Central tower facility as a virtual representation of the encounter. This capability leveraged existing live surveillance, video, and audio data streams distributed through a Live, Virtual, Constructive test environment, then depicted the encounter from the point of view of any aircraft in the system showing the proximity of the other aircraft. For the demonstration, position report data were sent to the ground from on-board sensors on the unmanned aircraft. The point of view can be change dynamically, allowing encounters from all angles to be observed. Visualizing the encounters in real-time provides a safe and effective method for observation of live flight testing and a strong alternative to travel to the remote test range.

Video Streaming↗
NASA NTRS2016

Flight Test Overview for UAS Integration in the NAS Project

The National Aeronautics and Space Administration is conducting a series of flight tests intended to support the reduction of barriers that prevent unmanned aircraft from flying without the required waivers from the Federal Aviation Administration. The most recent testing supported two separate test configurations. The first investigated the timing of Detect and Avoid (DAA) alerting thresholds using a radar-equipped unmanned vehicle and multiple live intruders flown at varying encounter geometries. The second configuration included a surrogate unmanned vehicle (flown from a ground control station, with a safety pilot on board) flying a mission in a virtual air traffic control airspace sector using research pilot displays and DAA advisories to maintain separation from live and virtual aircraft. The test was conducted over a seven-week span in the summer of 2015. The data from over 100 encounter sorties will be used to inform the RTCA Phase 1 Detect and Avoid and Command and Control Minimum Operating Performance Standards (MOPS) intended to be completed by the summer of 2016. Follow-on flight-testing is planned for the spring of 2016 to capture remaining encounters and support validation of the MOPS.

UAS↗
NASA NTRS2004

Aviation Particle Emissions Workshop

The Aviation Particle Emissions Workshop was held on November 18 19, 2003, in Cleveland, Ohio. It was sponsored by the National Aeronautic and Space Administration (NASA) under the Vehicle Systems Program (VSP) and the Ultra- Efficient Engine Technology (UEET) Project. The objectives were to build a sound foundation for a comprehensive particulate research roadmap and to provide a forum for discussion among U.S. stakeholders and researchers. Presentations included perspectives from the Federal Aviation Administration, the U.S. Environmental Protection Agency, NASA, and United States airports. There were five interactive technical sessions: sampling methodology, measurement methodology, particle modeling, database, inventory and test venue, and air quality. Each group presented technical issues which generated excellent discussion. The five session leads collaborated with their members to present summaries and conclusions to each content area.

Wey, Chowen C.↗
NASA NTRS2002

A Life-Cycle Cost Estimating Methodology for NASA-Developed Air Traffic Control Decision Support Tools

This paper describes the development of a life-cycle cost (LCC) estimating methodology for air traffic control Decision Support Tools (DSTs) under development by the National Aeronautics and Space Administration (NASA), using a combination of parametric, analogy, and expert opinion methods. There is no one standard methodology and technique that is used by NASA or by the Federal Aviation Administration (FAA) for LCC estimation of prospective Decision Support Tools. Some of the frequently used methodologies include bottom-up, analogy, top-down, parametric, expert judgement, and Parkinson's Law. The developed LCC estimating methodology can be visualized as a three-dimensional matrix where the three axes represent coverage, estimation, and timing. This paper focuses on the three characteristics of this methodology that correspond to the three axes.

Wang, Jianzhong Jay↗
NASA NTRS1998

Aeronautics and Aviation Science: Careers and Opportunities Project

The National Aeronautics and Space Administration funded project, Aeronautics and Aviation Science: Careers and Opportunities has been in operation since July, 1995. This project operated as a collaboration with Massachusetts Corporation for Educational Telecommunications, the Federal Aviation Administration, Bridgewater State College and four targeted "core sites" in the greater Boston area. In its first and second years, a video series on aeronautics and aviation science was developed and broadcast via "live, interactive" satellite feed. Accompanying teacher and student supplementary instructional materials for grades 6-9 were produced and disseminated by the Massachusetts Corporation for Educational Telecommunications (MCET). In the MCET grant application it states that project Take Off! in its initial phase would recruit and train teachers at "core" sites in the greater Boston area, as well as opening participation to other on-line users of MCET's satellite feeds. "Core site" classrooms would become equipped so that teachers and students might become engaged in an interactive format which aimed at not only involving the students during the "live" broadcast of the instructional video series, but which would encourage participation in electronic information gathering and sharing among participants. As a Take Off! project goal, four schools with a higher than average proportion of minority and underrepresented youth were invited to become involved with the project to give these students the opportunity to consider career exploration and development in the field of science aviation and aeronautics. The four sites chosen to participate in this project were: East Boston High School, Dorchester High School, Randolph Junior-Senior High School and Malden High School. In year 3 Dorchester was unable to continue to fully participate and exited out. Danvers was added to the "core site" list in year 3. In consideration of Goals 2000, the National Science Foundation standards for quality of teaching, and an educational agenda that promotes high standards for all students, Aeronautics and Aviation Science: Careers and Opportunities had as its aim to deliver products to schools, both in and outside the project sites, which attempt to incorporate multi-disciplined approaches in the presentation of a curriculum which would be appropriate in any classroom, while also aiming to appeal to young women and minorities. The curriculum was developed to provide students with fundamentals of aeronautics and aviation science. The curriculum also encouraged involving students and teachers in research projects, and further information gathering via electronic bulletin boards and internet capabilities. Though not entirely prescriptive, the curriculum was designed to guide teachers through recommended activities to supplement MCET's live telecast video presentations. Classroom teachers were encouraged to invite local pilots, meteorologists, and others from the field of aviation and aeronautics, particularly women and minorities to visit schools and to field questions from the students.

Texter, P. Cardie↗
NASA NTRS2009

Explicit Finite Element Modeling of Multilayer Composite Fabric for Gas Turbine Engine Containment Systems, Phase II: Material Model Development and Simulation of Experiments - Part 3

A team consisting of Arizona State University, Honeywell Engines, Systems & Services, the National Aeronautics and Space Administration Glenn Research Center, and SRI International collaborated to develop computational models and verification testing for designing and evaluating turbine engine fan blade fabric containment structures. This research was conducted under the Federal Aviation Administration Airworthiness Assurance Center of Excellence and was sponsored by the Aircraft Catastrophic Failure Prevention Program. The research was directed toward improving the modeling of a turbine engine fabric containment structure for an engine blade-out containment demonstration test required for certification of aircraft engines. The research conducted in Phase II began a new level of capability to design and develop fan blade containment systems for turbine engines. Significant progress was made in three areas: (1) further development of the ballistic fabric model to increase confidence and robustness in the material models for the Kevlar(TradeName) and Zylon(TradeName) material models developed in Phase I, (2) the capability was improved for finite element modeling of multiple layers of fabric using multiple layers of shell elements, and (3) large-scale simulations were performed. This report concentrates on the material model development and simulations of the impact tests.

Zylon↗
NASA NTRS1980

A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

Grantham, W. D.↗
NASA NTRSDate not supplied

X-57 Static Structural Requirements and Airworthiness Approach

The National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC) (Edwards, California, U.S.A.) has been flying various types of aircraft, including experimental ones requiring structural modifications. Many of these aircraft aren’t typically certified by the Federal Aviation Administration (FAA) or the Department of Defense (DoD), but NASA can provide its own airworthiness certification utilizing a riskbased approach. The AFRC has established review processes and procedures to identify hazards, manage risks associated with flight programs, ensure safe flight operations, and satisfy programmatic requirements. The Aerostructures Branch at AFRC developed guidelines for the structural safety of flight, covering experimental aircraft, new components, payloads, and modifications. These guidelines detail structural design, analysis, instrumentation, ground testing, and flight-test operational aspects. The guidelines are followed for defining the airworthiness plan throughout the life cycle of a project. The guidelines can be tailored to the risk posture of each individual project. This paper documents the details of the structural airworthiness plan for the X-57 aircraft, including existing, modified, and newly developed structures. Additionally, it covers the design requirements and load cases specific to the X-57 aircraft.

Wesley W. Li↗
NASA NTRS2010

Tropospheric Airborne Meteorological Data Reporting (TAMDAR) Sensor Validation and Verification on National Oceanographic and Atmospheric Administration (NOAA) Lockheed WP-3D Aircraft

As part of the National Aeronautics and Space Administration's Aviation Safety and Security Program, the Tropospheric Airborne Meteorological Data Reporting project (TAMDAR) developed a low-cost sensor for aircraft flying in the lower troposphere. This activity was a joint effort with support from Federal Aviation Administration, National Oceanic and Atmospheric Administration, and industry. This paper reports the TAMDAR sensor performance validation and verification, as flown on board NOAA Lockheed WP-3D aircraft. These flight tests were conducted to assess the performance of the TAMDAR sensor for measurements of temperature, relative humidity, and wind parameters. The ultimate goal was to develop a small low-cost sensor, collect useful meteorological data, downlink the data in near real time, and use the data to improve weather forecasts. The envisioned system will initially be used on regional and package carrier aircraft. The ultimate users of the data are National Centers for Environmental Prediction forecast modelers. Other users include air traffic controllers, flight service stations, and airline weather centers. NASA worked with an industry partner to develop the sensor. Prototype sensors were subjected to numerous tests in ground and flight facilities. As a result of these earlier tests, many design improvements were made to the sensor. The results of tests on a final version of the sensor are the subject of this report. The sensor is capable of measuring temperature, relative humidity, pressure, and icing. It can compute pressure altitude, indicated air speed, true air speed, ice presence, wind speed and direction, and eddy dissipation rate. Summary results from the flight test are presented along with corroborative data from aircraft instruments.

Tsoucalas, George↗
NASA NTRSDate not supplied

Optimizing Urban Air Mobility Research Through Bi-Directional Integration Processes for Effective Verification and Validation

Urban Air Mobility (UAM), a subset of Advanced Air Mobility (AAM), aims to revolutionize metropolitan transportation. This paper explores an engineering process framework within National Aeronautics and Space Administration (NASA)’s Air Mobility Pathfinders (AMP) project, which is focused on the safe scaling and seamless integration of UAM operations within the National Airspace System (NAS). Progressing through three phases — Initial, Midterm, and Mature — the Federal Aviation Administration (FAA)’s UAM Concept of Operations (ConOps) describes a proposed path for the evolution of UAM operations, presenting multifaceted challenges in technology, regulation, and stakeholder engagement. With this ConOps as a basis, the AMP project is executing research, development, test, and evaluation activities aimed at delivering validated reference architectures for the Midterm phase. This paper illuminates the pivotal role of the systems engineering process in managing these technical efforts. Robust verification and validation methods, along with systematic bi-directional integration process, enhance the ability to conduct research into the design and evolution of safe, efficient, and reliable UAM systems. In this paper a systematic framework will be presented and shown to facilitate interactions between UAM stakeholders and to effectively manage the complex architecture of UAM operations in the NAS.

National Airspace System↗
NASA NTRS2017

Operational Overview for UAS Integration in the NAS Project Flight Test Series 3

The National Aeronautics and Space Administration Unmanned Aircraft Systems Integration in the National Airspace System Project has conducted a series of flight tests intended to support the reduction of barriers that prevent unmanned aircraft from flying without the required waivers from the Federal Aviation Administration. The 2015 Flight Test Series 3, supported two separate test configurations. The first configuration investigated the timing of Detect and Avoid alerting thresholds using a radar equipped unmanned vehicle and multiple live intruders flown at varying encounter geometries. The second configuration included a surrogate unmanned vehicle (flown from a ground control station, with a safety pilot on board) flying a mission in a virtual air traffic control airspace sector using research pilot displays and Detect and Avoid advisories to maintain separation from live and virtual aircraft. The test was conducted over an eight-week span within the R-2508 Special Use Airspace. Over 200 encounters were flown for the first configuration, and although the second configuration was cancelled after three data collection flights, Flight Test 3 proved to be invaluable for the purposes of planning, managing, and execution of this type of integrated flight test.

unmanned aircraft systems↗