Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The 1983 tail-era data series. Volume 4: GOES 5 and GOES 6 geosynchronous magnetic field data

Twenty-four hour plots are presented of approximately 1-min average magnetic fields from the GOES 5 and GOES 6 spacecraft for the period January 1 to September 4, 1983, with the exception that GOES 6 was not available for the first five months of 1983. Data are displayed in a VDH coordinate system based on a centered dipole with Northern Hemisphere geographic coordinates of the pole at 78.80 deg latitude and 289.24 deg longitude. Magnetic local times are shown along the upper horizontal axis and universal time and dipole tilt angles along the bottom horizontal axis.

Fairfield, D. H.↗

Wind gust models derived from field data

Wind data measured during a field experiment were used to verify the analytical model of wind gusts. Good coincidence was observed; the only discrepancy occurred for the azimuth error in the front and back winds, where the simulated errors were smaller than the measured ones. This happened because of the assumption of the spatial coherence of the wind gust model, which generated a symmetric antenna load and, in consequence, a low azimuth servo error. This result indicates a need for upgrading the wind gust model to a spatially incoherent one that will reflect the real gusts in a more accurate manner. In order to design a controller with wind disturbance rejection properties, the wind disturbance should be known at the input to the antenna rate loop model. The second task, therefore, consists of developing a digital filter that simulates the wind gusts at the antenna rate input. This filter matches the spectrum of the measured servo errors. In this scenario, the wind gusts are generated by introducing white noise to the filter input.

Gawronski, W.↗

A new approach to evaluate the MODIS annual NPP product (MOD17A3) using forest field data from Turkey

In this study we present the first evaluation of the MODIS (MODerate resolution Imaging Spectroradiometer) annual Net Primary Product (NPP) for Turkey's forest ecosystems using field measurements. Due to lack of country scale field measurements (i.e. flux tower for forest ecosystems), tree DBH (Diameter at Breast Height) dataset provided by Ministry of Forest and Water Affair (MFWA) of Turkey is used to calculate NPP of Turkey’s forest ecosystems. The lack of a reliable NPP dataset leads the researchers to use global NPP models such as MODIS annual NPP product. The MODIS MOD17A3 product of vegetation net primary production (NPP) is one of the most highly used data sources for studies of global carbon 25 cycle. However, it is still necessary to test its predictions in multiple biomes, especially for heterogeneous areas in terms of its accuracy and potential bias. Here, we studied a new approach to evaluate coarse scale NPP estimates from the MODIS NPP- MOD17A3 data product, using 2008-2013 field measurements of tree growth throughout Turkey. There different methods were used to calculate field NPP, including standardized growth coefficients (MC), growth coefficients from North America (JC) and annual expected increment (AEI). The average NPP values for all the country is calculated as 2.06 kgC m-2(5years)-1 (0.412 kgC m-2 year-1) (SD = 1.15 kgC m-2 (5years)-1) from MOD17A3, 0.90 kgC m-2(5years)-1 (0.18 kgC m-2 year-1) (SD = 0.57 kgC m-2(5years)-1) with MC, 0.63 kgC m-2(5years)-1 (0.126 kgC m-2 year-1) (SD = 0.37 kgC m-2(5years)-1) with JC and 0.58 kgC m-2 year-1 (SD = 0.29 kgC m-2(5years)-1) with AEI for the studied plots. We found that the MODIS NPP product has a clear relation with both the NPP estimates obtained by using MC (R36 2 = 0.34, RMSE=1.51 kgC m-2(5years)-1) and JC (R37 2 = 0.32, RMSE = 1.73 kgC m-2(5years)-1). In addition to that, the relation between MOD17A3 product and AEI-derived NPP is relatively strong (R39 2 = 0.48, RMSE = 0.26 kgC m-2 year-1). We discuss possible reasons for these trade-offs among different methods. This study lays out a new approach to validate coarse scale MODIS product using field data directly, including for highly heterogeneous areas.

biomass↗

SOLAR FLARE PREDICTION USING SDO/HMI VECTOR MAGNETIC FIELD DATA WITH A MACHINE-LEARNING ALGORITHM

We attempt to forecast M- and X-class solar flares using a machine-learning algorithm, called support vector machine (SVM), and four years of data from the Solar Dynamics Observatory's Helioseismic and Magnetic Imager, the first instrument to continuously map the full-disk photospheric vector magnetic field from space. Most flare forecasting efforts described in the literature use either line-of-sight magnetograms or a relatively small number of ground-based vector magnetograms. This is the first time a large data set of vector magnetograms has been used to forecast solar flares. We build a catalog of flaring and non-flaring active regions sampled from a database of 2071 active regions, comprised of 1.5 million active region patches of vector magnetic field data, and characterize each active region by 25 parameters. We then train and test the machine-learning algorithm and we estimate its performances using forecast verification metrics with an emphasis on the true skill statistic (TSS). We obtain relatively high TSS scores and overall predictive abilities. We surmise that this is partly due to fine-tuning the SVM for this purpose and also to an advantageous set of features that can only be calculated from vector magnetic field data. We also apply a feature selection algorithm to determine which of our 25 features are useful for discriminating between flaring and non-flaring active regions and conclude that only a handful are needed for good predictive abilities.

79 ASTRONOMY AND ASTROPHYSICS↗

The electrical conductivity of the upper mantle as estimated from satellite magnetic field data

The electrical conductivity of the upper mantle is estimated from low-latitude magnetic field variations caused by large fluctuations in the equatorial ring current. The data base is derived from magnetic field magnitude data measured by satellites OGO 2, 4, and 6, which offer better global coverage than land-based observatories. The procedures of analysis consist of: (1) separation of the disturbance field into internal and external parts relative to the surface of the earth, (2) estimation of an electromagnetic response function Q(omega) which relates the internally generated magnetic field variations to the external variations due to the ring current, and (3) interpretation of the estimated response function using theoretical response functions for assumed conductivity profiles. Special consideration is given to possible oceanic and ionospheric effects. Best estimates of the geomagnetic response function Q(omega) for 0.2 to 2.0 cpd indicate an upper mantle conductivity of the order of 0.01 S/m.

Didwall, E. M.↗

FIRST SIMULTANEOUS DETECTION OF MOVING MAGNETIC FEATURES IN PHOTOSPHERIC INTENSITY AND MAGNETIC FIELD DATA

The formation and the temporal evolution of a bipolar moving magnetic feature (MMF) was studied with high-spatial and temporal resolution. The photometric properties were observed with the New Solar Telescope at Big Bear Solar Observatory using a broadband TiO filter (705.7 nm), while the magnetic field was analyzed using the spectropolarimetric data obtained by Hinode. For the first time, we observed a bipolar MMF simultaneously in intensity images and magnetic field data, and studied the details of its structure. The vector magnetic field and the Doppler velocity of the MMF were also studied. A bipolar MMF with its positive polarity closer to the negative penumbra formed, accompanied by a bright, filamentary structure in the TiO data connecting the MMF and a dark penumbral filament. A fast downflow ({<=}2 km s{sup -1}) was detected at the positive polarity. The vector magnetic field obtained from the full Stokes inversion revealed that a bipolar MMF has a U-shaped magnetic field configuration. Our observations provide a clear intensity counterpart of the observed MMF in the photosphere, and strong evidence of the connection between the MMF and the penumbral filament as a serpentine field.

79 ASTRONOMY AND ASTROPHYSICS↗

BASIN-3D Data Integration for Selected ARM Data Field Campaign Report

The purpose of this data services request was to demonstrate integration of the Atmospheric Radiation Measurement (ARM) User Facility’s “met” datastreams with time series data from other earth science data sources using the BASIN-3D data synthesis software tool. BASIN-3D is an open-source Python library that enables researchers to integrate data across configured public and private data sources. It provides a common query language for researchers to request measurement locations and time series data based on specified locations, variables, time period, statistics, aggregation, and data quality. BASIN-3D acquires the data that match the query from each configured data source and translates the results into harmonized vocabularies, thus reducing researchers' data-wrangling effort. In addition, because the queries are executed on demand, researchers can easily regenerate their synthesized data sets as new data and/or data updates become available, eliminating one-off data products. BASIN-3D can output data using a variety of different data structures for end-user applications including Python pandas data frames and hdf5 output formats.

54 ENVIRONMENTAL SCIENCES↗

Modeling PCM-Enhanced Insulation System and Benchmarking EnergyPlus against Controlled Field Data

Phase-change materials (PCM) used in building envelopes appear to be a promising technology to reduce energy consumption and reduce/shift peak load. However, due to complexity in modeling the dynamic behavior of PCMs, current modeling tools either lack an accurate way of predicting the performance and impact of PCMs in buildings or validation of predicted or measured performance is not available. This paper presents a model of a PCM-enhanced dynamic-insulation system in EnergyPlus (E+) and compares the simulation results against field-measured data. Laboratory tests to evaluate thermal properties and to characterize the PCM and PCM-enhanced cellulose insulation system are also presented in this paper. Results indicate that the predicted daily average heat flux through walls from the E+ simulation was within 9% of field measured data. Future analysis will allow us to predict annual energy savings from the use of PCM in buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Need for High-Resolution Crustal Magnetic Field Data on Mars

Magnetometer observations from the Mars Global Surveyor spacecraft (MAG/ER on MGS) have confirmed that Mars does not presently have an internally-generated dipole magnetic field, and have also revealed intense remanent magnetism in the Martian crust. The remanent magnetic anomalies, most prevalent in the southern highlands region, are a record of the past history of the internal Mars dipole field. The MAG/ER data constitute a valuable data set for constraining the early thermal evolution of Mars and the history of the planetary magnetic field. However, the data lack the resolution needed to draw definite conclusions regarding the time history of the field. High-resolution magnetometer observations, obtained at low-altitude, are needed to complement and extend the MGS/ER data set and allow a definitive time history of the internal Mars dynamo to be constructed.

Raymond, C. A.↗

Potential utility of future satellite magnetic field data

The requirements for a program of geomagnetic field studies are examined which will satisfy a wide range of user needs in the interim period between now and the time at which data from the Geopotential Research Mission (GRM) becomes available, and the long term needs for NASA's program in this area are considered. An overview of the subject, a justification for the recommended activities in the near term and long term, and a summary of the recommendations reached by the contributors is included.

Source record↗

The Use of Atmospheric Composition Variable Standard Names in Airborne and Field Data Products

The number of variables measured during airborne field campaigns has increased more than tenfold over the last thirty years. With this increase in measurements, the complexity for distributed active archive centers (DAACs) to distribute the data and for data users to search for and find measurements of interest has also increased. Part of this complexity arises from the unique variable names in suborbital atmospheric composition field studies. With limited guidelines related to variable naming, variable names and structures can vary significantly, even for the same type of variable. It is common for instrument scientists to use their intended measurable quantity as the data variable name. This can make it difficult for users to locate and interact with a particular variable across multiple data sets. One effective solution to this problem, identified by the Earth Science Data System (ESDS) ICARTT Refresh Working Group [1], was to introduce variable standard names that can be used as tags for each data variable. This allows similar measurements (e.g., dew point) to be categorized and located across field campaigns, regardless of what variable name the instrument scientist has used. From this the atmospheric composition variable standard names were developed with the goal to use Findable, Accessible, Interoperable, and Reusable (FAIR) principles [2] and provide context for all users, while remaining connected to those in the subject area. These standard names have been successfully implemented in FIREX-AQ, CAMP 2EX, ACTIVATE, and DCOTSS field campaigns.

metadata↗

Constraints on lithospheric structure from satellite potential field data: Africa and Asia. Analysis and interpretation of MAGSAT anomalies over North Africa

Crustal anomaly detection with MAGSAT data is frustrated by the inherent resolving power of the data and by contamination from the external and core fields. The quality of the data might be tested by modeling specific tectonic features which produce anomalies that fall within the proposed resolution and crustal amplitude capabilities of the MAGSAT fields. To test this hypothesis, the north African hotspots associated with Ahaggar, Tibestia and Darfur have been modeled as magnetic induction anomalies due solely to shallower depth to the Curie isotherm surface beneath these features. The MAGSAT data were reduced by subtracting the external and core fields to isolate the scalar and vertical component crustal signals. The predicted model magnetic signal arising from the surface topography of the uplift and the Curie isotherm surface was calculated at MAGSAT altitudes by the Fourier transform technique modified to allow for variable magnetization. In summary it is suggested that the region beneath Ahaggar is associated with a strong thermal anomaly and the predicted anomaly best fits the associated MAGSAT anomaly if the African plate is moving in a northeasterly direction.

Phillips, R. J.↗

Augmenting a Simulation Campaign for Hybrid Computer Model and Field Data Experiments

The Kennedy and O’Hagan (KOH) calibration framework uses coupled Gaussian processes (GPs) to meta-model an expensive simulator (first GP), tune its “knobs” (calibration inputs) to best match observations from a real physical/field experiment and correct for any modeling bias (second GP) when predicting under new field conditions (design inputs). There are well-established methods for placement of design inputs for data-efficient planning of a simulation campaign in isolation, that is, without field data: space-filling, or via criterion like minimum integrated mean-squared prediction error (IMSPE). Analogues within the coupled GP KOH framework are mostly absent from the literature. Here, in this study, we derive a closed form IMSPE criterion for sequentially acquiring new simulator data for KOH. We illustrate how acquisitions space-fill in design space, but concentrate in calibration space. Closed form IMSPE precipitates a closed-form gradient for efficient numerical optimization. We demonstrate that our KOH-IMSPE strategy leads to a more efficient simulation campaign on benchmark problems, and conclude with a showcase on an application to equilibrium concentrations of rare earth elements for a liquid–liquid extraction reaction.

97 MATHEMATICS AND COMPUTING↗

Comprehensive evaluation of attitude and orbit estimation using real earth magnetic field data

A single, augmented extended Kalman filter (EKF) which simultaneously and autonomously estimates spacecraft attitude and orbit was developed and tested with simulated and real magnetometer and rate data. Since the earth's magnetic field is a function of time and position, and since time is accurately known, the differences between the computed and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft's orbit, are a function of orbit and attitude errors. These differences can be used to estimate the orbit and attitude. The test results of the EKF with magnetometer and gyro data from three NASA satellites are presented and evaluated.

Deutschmann, Julie↗

Comprehensive Evaluation of Attitude and Orbit Estimation Using Actual Earth Magnetic Field Data

A single, augmented Extended Kalman Filter (EKF), which simultaneously and autonomously estimates spacecraft attitude and orbit has been developed and successfully tested with real magnetometer and gyro data only. Because the earth magnetic field is a function of time and position, and because time is known quite precisely, the differences between the computed and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both orbit and attitude errors. Thus, conceivably these differences could be used to estimate both orbit and attitude; an observability study validated this assumption. The results of testing the EKF with actual magnetometer and gyro data, from four satellites supported by the NASA Goddard Space Flight Center (GSFC) Guidance, Navigation, and Control Center, are presented and evaluated. They confirm the assumption that a single EKF can estimate both attitude and orbit when using gyros and magnetometers only.

Deutschmann, Julie K.↗

Estimating Attitude, Trajectory, and Gyro Biases in an Extended Kalman Filter using Earth Magnetic Field Data from the Rossi X-Ray Timing Explorer

Traditionally satellite attitude and trajectory have been estimated with completely separate systems, using different measurement data. The estimation of both trajectory and attitude for low earth orbit satellites has been successfully demonstrated in ground software using magnetometer and gyroscope data. Since the earth's magnetic field is a function of time and position, and since time is known quite precisely, the differences between the computed and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both the spacecraft trajectory and attitude errors. Therefore, these errors can be used to estimate both trajectory and attitude. This work further tests the single augmented Extended Kalman Filter (EKF) which simultaneously and autonomously estimates spacecraft trajectory and attitude with data from the Rossi X-Ray Timing Explorer (RXTE) magnetometer and gyro-measured body rates. In addition, gyro biases are added to the state and the filter's ability to estimate them is presented.

Deutschmann, Julie↗

Inversion of Gravity and Magnetic Field Data for Tyrrhena Patera

Tyrrhena Patera is located to the southeast/northeast of the Isidis/Hellas impact basin. It was geologically active into the Late Amazonian, although the main edifice was formed in the Noachian(approximately 3.7-4.0 Ga). Tyrrhena Patera and the surrounding area contain gravity and magnetic anomalies that appear to be correlated. The results presented here are for the anomalies 1a and 1b (closest to Tyrrhena Patera), however other anomalies in this region have been modeled and will be presented at the conference.The Mars Global Surveyor (MGS) free-air gravity signature of Tyrrhena Patera has been studied by Kiefer, who inferred the existence of an extinct magma chamber below it. The magnetic signature has been mapped by Lillis R. J. et al., who compared electron reflectometer data, analogous to the total magnetic field, for Syrtis Major and Tyrrhena Patera and argued for demagnetization of both volcanoes.

magnetic anomaly↗