Search NASA⌕ Search

SEARCH · Search NASA

Results for “Filtering algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Estimation and filtering for high-precision GPS positioning applications

Estimation of GPS satellite orbits and other parameters for high-accuracy geodetic and tracking applications is carried out with a multi-satellite batch sequential pseudo-epoch state process noise filter. Both square-root information filtering and UD factorized covariance filtering and smoothing formulations are implemented in the software to enhance numerical stability. The filtering algorithms have been arranged to take advantage of sparse matrices and other characteristics of the GPS measurement scenarios. The filter includes unique error evaluation capabilities to assess effects from mismodeling. Process noise plays a key role in the orbit determination for stochastic behavior of transmitter/receiver clocks, atmospheric-induced delay fluctuations, and unmodeled spacecraft accelerations. Present GPS orbit accuracy is better than 1 m, with ground baselines determined simultaneously to relative accuracy of 1.5 parts in 10 to the 8th over several thousand km distance.

Lichten, Stephen M.↗
NASA NTRS2006

Fast Lossless Compression of Multispectral-Image Data

An algorithm that effects fast lossless compression of multispectral-image data is based on low-complexity, proven adaptive-filtering algorithms. This algorithm is intended for use in compressing multispectral-image data aboard spacecraft for transmission to Earth stations. Variants of this algorithm could be useful for lossless compression of three-dimensional medical imagery and, perhaps, for compressing image data in general.

Klimesh, Matthew↗
NASA NTRS2012

GOES-R AWG GLM Val Tool Development

We are developing tools needed to enable the validation of the Geostationary Lightning Mapper (GLM). In order to develop and test these tools, we have need of a robust, high-fidelity set of GLM proxy data. Many steps have been taken to ensure that the proxy data are high quality. LIS is the closest analog that exists for GLM, so it has been used extensively in developing the GLM proxy. We have verified the proxy data both statistically and algorithmically. The proxy data are pixel (event) data, called Level 1B. These data were then clustered into flashes by the Lightning Cluster-Filter Algorithm (LCFA), generating proxy Level 2 data. These were then compared with the data used to generate the proxy, and both the proxy data and the LCFA were validated. We have developed tools to allow us to visualize and compare the GLM proxy data with several other sources of lightning and other meteorological data (the so-called shallow-dive tool). The shallow-dive tool shows storm-level data and can ingest many different ground-based lightning detection networks, including: NLDN, LMA, WWLLN, and ENTLN. These are presented in a way such that it can be seen if the GLM is properly detecting the lightning in location and time comparable to the ground-based networks. Currently in development is the deep-dive tool, which will allow us to dive into the GLM data, down to flash, group and event level. This will allow us to assess performance in comparison with other data sources, and tell us if there are detection, timing, or geolocation problems. These tools will be compatible with the GLM Level-2 data format, so they can be used beginning on Day 0.

Bateman, Monte↗
NASA NTRS1976

A realization of the RAM digital filter

The digital filtering algorithm of W. D. Little, which employs a large RAM to obtain high speed, is implemented in a simple hardware configuration. The nonrecursive version of this filter is compared to the counting digital filter and found to be competitive for low-order filters up to order 7 (8 coefficients).

Zohar, S.↗
NASA NTRS1984

Coastal bathymetry and currents from LANDSAT data

LANDSAT scenes of coastal areas should be useful for bathymetry and for mapping sediment flow if scatter from bottom and suspended matter can be separated by multi-date analysis. Several filter algorithms have been developed to reduce both artifacts and random noise while retaining meaningful structures such as breakwaters and underwater reefs. Results of application of these filters to LANDSAT scenes of the Israeli coast are presented.

Rosenberg, N.↗
NASA NTRS2007

Advanced Control Algorithms for Compensating the Phase Distortion Due to Transport Delay in Human-Machine Systems

The desire to create more complex visual scenes in modern flight simulators outpaces recent increases in processor speed. As a result, simulation transport delay remains a problem. New approaches for compensating the transport delay in a flight simulator have been developed and are presented in this report. The lead/lag filter, the McFarland compensator and the Sobiski/Cardullo state space filter are three prominent compensators. The lead/lag filter provides some phase lead, while introducing significant gain distortion in the same frequency interval. The McFarland predictor can compensate for much longer delay and cause smaller gain error in low frequencies than the lead/lag filter, but the gain distortion beyond the design frequency interval is still significant, and it also causes large spikes in prediction. Though, theoretically, the Sobiski/Cardullo predictor, a state space filter, can compensate the longest delay with the least gain distortion among the three, it has remained in laboratory use due to several limitations. The first novel compensator is an adaptive predictor that makes use of the Kalman filter algorithm in a unique manner. In this manner the predictor can accurately provide the desired amount of prediction, while significantly reducing the large spikes caused by the McFarland predictor. Among several simplified online adaptive predictors, this report illustrates mathematically why the stochastic approximation algorithm achieves the best compensation results. A second novel approach employed a reference aircraft dynamics model to implement a state space predictor on a flight simulator. The practical implementation formed the filter state vector from the operator s control input and the aircraft states. The relationship between the reference model and the compensator performance was investigated in great detail, and the best performing reference model was selected for implementation in the final tests. Theoretical analyses of data from offline simulations with time delay compensation show that both novel predictors effectively suppress the large spikes caused by the McFarland compensator. The phase errors of the three predictors are not significant. The adaptive predictor yields greater gain errors than the McFarland predictor for short delays (96 and 138 ms), but shows smaller errors for long delays (186 and 282 ms). The advantage of the adaptive predictor becomes more obvious for a longer time delay. Conversely, the state space predictor results in substantially smaller gain error than the other two predictors for all four delay cases.

Guo, Liwen↗
NASA NTRS2016

Model-Based Fatigue Prognosis of Fiber-Reinforced Laminates Exhibiting Concurrent Damage Mechanisms

Prognostics of large composite structures is a topic of increasing interest in the field of structural health monitoring for aerospace, civil, and mechanical systems. Along with recent advancements in real-time structural health data acquisition and processing for damage detection and characterization, model-based stochastic methods for life prediction are showing promising results in the literature. Among various model-based approaches, particle-filtering algorithms are particularly capable in coping with uncertainties associated with the process. These include uncertainties about information on the damage extent and the inherent uncertainties of the damage propagation process. Some efforts have shown successful applications of particle filtering-based frameworks for predicting the matrix crack evolution and structural stiffness degradation caused by repetitive fatigue loads. Effects of other damage modes such as delamination, however, are not incorporated in these works. It is well established that delamination and matrix cracks not only co-exist in most laminate structures during the fatigue degradation process but also affect each other's progression. Furthermore, delamination significantly alters the stress-state in the laminates and accelerates the material degradation leading to catastrophic failure. Therefore, the work presented herein proposes a particle filtering-based framework for predicting a structure's remaining useful life with consideration of multiple co-existing damage-mechanisms. The framework uses an energy-based model from the composite modeling literature. The multiple damage-mode model has been shown to suitably estimate the energy release rate of cross-ply laminates as affected by matrix cracks and delamination modes. The model is also able to estimate the reduction in stiffness of the damaged laminate. This information is then used in the algorithms for life prediction capabilities. First, a brief summary of the energy-based damage model is provided. Then, the paper describes how the model is embedded within the prognostic framework and how the prognostics performance is assessed using observations from run-to-failure experiments

Prognostics↗
NASA NTRS2013

SDR Input Power Estimation Algorithms

The General Dynamics (GD) S-Band software defined radio (SDR) in the Space Communications and Navigation (SCAN) Testbed on the International Space Station (ISS) provides experimenters an opportunity to develop and demonstrate experimental waveforms in space. The SDR has an analog and a digital automatic gain control (AGC) and the response of the AGCs to changes in SDR input power and temperature was characterized prior to the launch and installation of the SCAN Testbed on the ISS. The AGCs were used to estimate the SDR input power and SNR of the received signal and the characterization results showed a nonlinear response to SDR input power and temperature. In order to estimate the SDR input from the AGCs, three algorithms were developed and implemented on the ground software of the SCAN Testbed. The algorithms include a linear straight line estimator, which used the digital AGC and the temperature to estimate the SDR input power over a narrower section of the SDR input power range. There is a linear adaptive filter algorithm that uses both AGCs and the temperature to estimate the SDR input power over a wide input power range. Finally, an algorithm that uses neural networks was designed to estimate the input power over a wide range. This paper describes the algorithms in detail and their associated performance in estimating the SDR input power.

Nappier, Jennifer M.↗
NASA NTRS1984

Improvements in forest classification and inventory using remotely sensed data

A Forest Classification and Inventory System (Focis) has been developed for large area forest inventories on the basis of Landsat and digital terrain data. It is a potential advantage of Focis that it can provide timely inventories at a reduced cost which are easily updated. The Klamath National Forest in Northern California was employed as test area for the initial development of Focis. Focis is constantly being changed and improved. Two recent additions to the inventory system include a spatial filtering algorithm which improves the spatial coherence in the final classified image, and a modification to the classification procedure designed to reduce the adverse effects of local topography on classification accuracy. Attention is given to a Focis overview, spatial filtering, the interface with the forest service geographic information system, and efforts to reduce the influence of topography.

Woodcock, C. E.↗
NASA NTRS1990

Adaptive box filters for removal of random noise from digital images

Adaptive box-filtering algorithms to remove random bit errors and to smooth noisy data have been developed. For both procedures, the standard deviation of those pixels within a local box surrounding each pixel is used. A series of two or three filters with decreasing box sizes can be run to clean up extremely noisy images and to remove bit errors near sharp edges. The second filter, for noise smoothing, is similar to the 'sigma filter' of Lee (1983). The technique effectively reduces speckle in radar images without eliminating fine details.

Eliason, Eric M.↗
NASA NTRS1980

Determination of instrumentation errors from measured data using maximum likelihood method

The maximum likelihood method is used for estimation of unknown initial conditions, constant bias and scale factor errors in measured flight data. The model for the system to be identified consists of the airplane six-degree-of-freedom kinematic equations, and the output equations specifying the measured variables. The estimation problem is formulated in a general way and then, for practical use, simplified by ignoring the effect of process noise. The algorithm developed is first applied to computer generated data having different levels of process noise for the demonstration of the robustness of the method. Then the real flight data are analyzed and the results compared with those obtained by the extended Kalman filter algorithm.

Keskar, D. A.↗
NASA NTRS1986

Systolic VLSI for Kalman filters

A novel two-dimensional parallel computing method for real-time Kalman filtering is presented. The mathematical formulation of a Kalman filter algorithm is rearranged to be the type of Faddeev algorithm for generalizing signal processing. The data flow mapping from the Faddeev algorithm to a two-dimensional concurrent computing structure is developed. The architecture of the resulting processor cells is regular, simple, expandable, and therefore naturally suitable for VLSI chip implementation. The computing methodology and the two-dimensional systolic arrays are useful for Kalman filter applications as well as other matrix/vector based algebraic computations.

Yeh, H.-G.↗
NASA NTRS1987

Guidance simulation and test support for differential GPS flight experiment

Three separate tasks which supported the test preparation, test operations, and post test analysis of the NASA Ames flight test evaluation of the differential Global Positioning System (GPS) are presented. Task 1 consisted of a navigation filter design, coding, and testing to optimally make use of GPS in a differential mode. The filter can be configured to accept inputs from external censors such as an accelerometer and a barometric or radar altimeter. The filter runs in real time onboard a NASA helicopter. It processes raw pseudo and delta range measurements from a single channel sequential GPS receiver. The Kalman filter software interfaces are described in detail, followed by a description of the filter algorithm, including the basic propagation and measurement update equations. The performance during flight tests is reviewed and discussed. Task 2 describes a refinement performed on the lateral and vertical steering algorithms developed on a previous contract. The refinements include modification of the internal logic to allow more diverse inflight initialization procedures, further data smoothing and compensation for system induced time delays. Task 3 describes the TAU Corp participation in the analysis of the real time Kalman navigation filter. The performance was compared to that of the Z-set filter in flight and to the laser tracker position data during post test analysis. This analysis allowed a more optimum selection of the parameters of the filter.

Geier, G. J.↗
NASA NTRS2004

System design, modelling, and tracking filter for bearings only analog camera

In this paper, each subsystem of the Celestial Sensor is discussed with emphasis given to the filtering algorithms. The celestial sensor software processes sequential frame based bearing measurements on a peripheral CPY specifically designed for this application. A frame preprocessor is used to normalize each bearing measurement and apply a number of accept/reject rules. The accepted set of measurements is then passed to an Extended Kalman Filter (EKP) that is tuned to track the motion of the robot within the room.

Ahmed, Asif↗
NASA NTRS2009

Trajectory Reconstruction of the ST-9 Sounding Rocket Experiment Using IMU and Landmark Data

This paper presents trajectory reconstruction of the ST-9 sounding rocket experiment using the onboard IMU data and descent imagery. The raw IMU accelerometer measurements are first converted into inertial acceleration and then used in trajectory integration. The descent images are pre-processed using a map-matching algorithm and unique landmarks for each image are created. Using the converted IMU data and descent images, the result from dead-reckoning and the kinematic-fix approaches are first compared with the GPS measurements. Then, both the IMU data and landmarks are processed together using a batch least-squares filter and the position, velocity, stochastic acceleration, and camera orientation of each image are estimated. The reconstructed trajectory is compared with the GPS data and the corresponding formal uncertainties are presented. The result shows that IMU data and descent images processed with a batch filter algorithm provide the trajectory accuracy required for pin-point landing.

Park, Ryan S.↗
NASA NTRS2017

Smoothing-Based Relative Navigation and Coded Aperture Imaging

This project will develop an efficient smoothing software for incremental estimation of the relative poses and velocities between multiple, small spacecraft in a formation, and a small, long range depth sensor based on coded aperture imaging that is capable of identifying other spacecraft in the formation. The smoothing algorithm will obtain the maximum a posteriori estimate of the relative poses between the spacecraft by using all available sensor information in the spacecraft formation.This algorithm will be portable between different satellite platforms that possess different sensor suites and computational capabilities, and will be adaptable in the case that one or more satellites in the formation become inoperable. It will obtain a solution that will approach an exact solution, as opposed to one with linearization approximation that is typical of filtering algorithms. Thus, the algorithms developed and demonstrated as part of this program will enhance the applicability of small spacecraft to multi-platform operations, such as precisely aligned constellations and fractionated satellite systems.

Relative positioning↗
NASA NTRS2002

GOES Cloud Detection at the Global Hydrology and Climate Center

The bi-spectral threshold (BTH) for cloud detection and height assignment is now operational at NASA's Global Hydrology and Climate Center (GHCC). This new approach is similar in principle to the bi-spectral spatial coherence (BSC) method with improvements made to produce a more robust cloud-filtering algorithm for nighttime cloud detection and subsequent 24-hour operational cloud top pressure assignment. The method capitalizes on cloud and surface emissivity differences from the GOES 3.9 and 10.7-micrometer channels to distinguish cloudy from clear pixels. Separate threshold values are determined for day and nighttime detection, and applied to a 20-day minimum composite difference image to better filter background effects and enhance differences in cloud properties. A cloud top pressure is assigned to each cloudy pixel by referencing the 10.7-micrometer channel temperature to a thermodynamic profile from a locally -run regional forecast model. This paper and supplemental poster will present an objective validation of nighttime cloud detection by the BTH approach in comparison with previous methods. The cloud top pressure will be evaluated by comparing to the NESDIS operational CO2 slicing approach.

Laws, Kevin↗