Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fragment separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fast switching magnet for heavy ion beam separation

This paper presents the design for a switching magnet capable of deflecting 6.5 MeV/u heavy-ion beams with mass-to-charge ratio of 7 by 10 degrees. This magnet can produce variable flat-top pulses from 1 to 30 ms with rise and fall times of less than 0.5 ms at a variable duty cycle of 3–91% into a heavily inductive load. The magnet has a laminated, iron dominated, H-shaped core. Directly-cooled copper pancake coils energize the magnet. We present the magnet design considerations, including the results of extensive computer modeling. Finally, we also present the conceptual engineering design and the studies of magnet yoke fabrication.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Mapping glyceride species in biodiesel by high-temperature gas chromatography combined with chemical ionization mass spectrometry.

Accurate and comprehensive identification of residual glycerides in biodiesel is an important part of the fuel characterization, due to the impact of glycerides on the fuel physicochemical properties. However, analysis of bound glycerol in biodiesel samples faces challenges due to lack of readily available standards of structurally complex glyceride species in non-traditional biodiesel feedstocks, and a risk of misannotation in the presence of impurities in gas chromatographic separations. Here we evaluate methane and isobutane chemical ionization – single quadrupole mass spectrometry combined with high temperature gas chromatography separations for mapping monoacylglycerols, diacylglycerols and triacylglycerols in biodiesel. Unlike the electron impact ionization which produces mostly in-source fragments, isobutane chemical ionization spectra of tetramethylsilyl (TMS) derivatized monoacylglycerols and diacylglycerols are dominated by molecular ions and M-SiO(CH3)3+ ions, which provide important diagnostic information. We demonstrate the utility of isobutane chemical ionization in identifying structurally complex glycerolipid standards as well as species in biodiesel samples from different plant and animal feedstocks.

biodiesel, chemcial ionization mass spectrometry↗
DOE OSTI2026

Hierarchical microstructure of Yb-filled skutterudites through ultrasonically atomized spherical powders for enhanced thermoelectric performance

Hierarchical microstructures are widely explored as a strategy to reduce lattice thermal conductivity in thermoelectric materials while preserving favorable electronic transport. Here we demonstrate that ultrasonic atomization of precursor powders provides an intrinsic pathway to generate such architectures in n-type Yb0.3Co4Sb12 skutterudites. Materials were synthesized by both conventional sealed-ampoule and ultrasonic atomization routes, each yielding essentially single-phase skutterudite after densification. However, the atomized spherical powders undergo a distinct reaction-driven microstructural evolution during thermal treatment prior to densification. Electron microscopy reveals that the skutterudite phase within the particles induces swelling, cracking, and fragmentation of the droplets before consolidation. Multimodal structural and microstructural characterizations show that densification of these fragmented powders produces a hierarchical microstructure consisting of submicron grains, micrometer-scale faceted crystallites, and powder-derived domains separated by oxide-decorated boundaries. Comprehensive thermoelectric transport measurements evidence that this multiscale architecture lowers the lattice thermal conductivity while maintaining favorable electronic transport, leading to an average ~10% enhancement in the thermoelectric figure of merit. Complementary 121Sb Mössbauer spectroscopy further indicates lattice softening in the atomized material. These results demonstrate that ultrasonic atomization provides an effective route to engineer hierarchical microstructures in skutterudite thermoelectrics and offers a promising strategy for tailoring thermal transport in energy-conversion materials.

Bouteiller, Hugo [ORNL] (ORCID:0009000421322962)↗
DOE OSTI2020

Meta-analysis of peptides to detect protein significance

Shotgun assays are widely used in biotechnologies to char- acterize large molecules, which are hard to be measured as a whole directly. For instance, in Liquid Chromatography Mass Spectrometry (LC-MS) shotgun experiments, proteins in biological samples are digested into peptides, and then peptides are separated and measured. However, in proteomics study, investigators are usually interested in the performance of the whole proteins instead of those peptide fragments. In light of meta-analysis, we propose an adaptive thresholding method to select informative peptides, and combine peptide-level models to protein-level analysis. Overall, the meta-analysis procedure and modeling rationale can be adapted to data analysis of other types of shotgun assays.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Design of a separate effects MiniFuel irradiation experiment investigating microstructure evolution in high burnup UO 2

The microstructural evolution of UO 2 fuel pellets during commercial operation in light water reactors (LWRs) is known to vary significantly across the pellet radius due to spatial variations in local temperature and burnup. The primary obstacle to extending LWR refueling cycles to 24-month intervals is the susceptibility of certain high burnup fuel microstructures to fuel fragmentation, relocation, and dispersal (FFRD) during a loss of coolant accident (LOCA). Although FFRD of the high burnup structure in the rim region of a pellet is well studied, the fine fragmentation that has been observed in a second region, near the midradius of the pellet (termed the “dark zone”) following mock LOCA testing of high burnup commercial fuel rods is less understood. This paper describes the design, analysis, and execution of a separate effects MiniFuel irradiation experiment that aims to identify the specific temperature and burnup regimes under which FFRD-susceptible dark zone microstructures form. The small disc specimens (3 mm diameter by ∼0.3 mm thick) enable more precise control of the relatively uniform temperature and burnup conditions. A total of 42 specimens were fabricated with typical LWR fuel densities (∼96%–98% of theoretical density) and grain sizes (∼12 μm) and are being irradiated over a range of temperatures (600°C–1000°C) and discharge burnups (50–72 MWd/kg-U) that bound the midradius region of high burnup LWR fuel. Fuel specimens with identical 235 U enrichments were inserted in two irradiation locations in the High Flux Isotope Reactor and are currently undergoing irradiation to further evaluate the impact of rate effects (fission rate, time at temperature) on the microstructural evolution. The fuel fabrication and the thermal and neutronic simulations used for designing the experiment are detailed in this paper. A secondary objective of the experiment is to observe fission gas release (FGR) under the various irradiation conditions, and this work provides first-order predictions of FGR from all fuel specimens. The insights gained from these experiments will inform future high burnup core designs that could minimize the formation of susceptible microstructures and ultimately enable 24-month refueling cycles while minimizing the fraction of the fuel susceptible to FFRD.

FFRD↗
DOE OSTI2020

Differentiating and Quantifying Gas-Phase Conformational Isomers Using Coulomb Explosion Imaging

Conformational isomerism plays a crucial role in defining the physical and chemical properties and biological activity of molecules ranging from simple organic compounds to complex biopolymers. However, it is often a significant challenge to differentiate and separate these isomers experimentally as they can easily interconvert due to their low rotational energy barrier. Here, we use the momentum correlation of fragment ions produced after inner-shell photoionization to distinguish conformational isomers of 1,2-dibromoethane (C 2 H 4 Br 2 ). We demonstrate that the three-body breakup channel, C 2 H 4 + + Br + + Br + , contains signatures of both sequential and concerted breakup, which are decoupled to distinguish the geometries of two conformational isomers and to quantify their relative abundance. The sensitivity of our method to quantify these yields is established by measuring the relative abundance change with sample temperature, which agrees well with calculations. Finally, our study paves the way for using Coulomb explosion imaging to track subtle molecular structural changes.

Photoionization↗
DOE OSTI2024

Multinucleon transfer in 48 Ti + 48 Ti collisions at 11.5 MeV/nucleon

In this work, experimental data of projectile fragment distributions from a preliminary experimental study of the reaction of 11.5 MeV/nucleon 48 Ti on 48 Ti analyzed with the MARS recoil separator at the Cyclotron Institute of Texas A&M University are presented. Production cross sections, momentum distributions and excitation-energy distributions are extracted and compared with calculations with the Deep Inelastic Transfer (DIT) model and the Constrained Molecular Dynamics model (CoMD). Despite the limited extent of the present dataset, an overall agreement of the models with the data is found pointing at the prevailing nucleon-exchange character of the collisions at this energy.

Souliotis, Georgios↗
DOE OSTI2023

Defining the Minimal Set of Microbial Genes Required for Valorization of Lignin Biomass (Final Report)

Project Goals: Lignin is the second most abundant biopolymer on earth and represents a critically underutilized biomass resource for hydrocarbon feedstocks. Despite substantial effort, there is still no efficient process to convert lignin to useable carbon-based platform chemicals and materials. The goal of this project is identify a minimal set of microbial enzymes necessary for lignin breakdown and sufficient for the synthesis of valuable chemical intermediates from lignin isolated as a byproduct of lignocellulosic ethanol production. These genes will be then used to engineer functional whole cell biocatalysts for tunable lignin metabolism. To date, although a number of enzymes have been associated with lignin degradation, most have been tested in isolation (as individual enzymes) and on drastically different substrates -- often dyes that are not related to lignin. In contrast, lignin utilization in nature likely occurs by microbial consortia with multiple enzymes acting synergistically. We propose to examine two separate stages of lignin breakdown carried out by the microbes that do it best: (1) early breakdown of native polymeric lignin into soluble fragments by a set of sequenced wood-rotting fungal species, and (2) downstream metabolism of these soluble lignin fragments to useful chemical intermediates by a panel of sequenced soil saprophytes. Our approach involves testing sets of genes that will be assayed combinatorially in the context of a heterologous expression host. The resulting engineered strains will be systematically assayed using soluble lignin fragments, synthetic defined polymeric lignin, and finally lignin directly sourced from lignocellulosic processing streams. In addition to resulting in a functional whole cell biocatalyst for lignin utilization, we anticipate that this approach will allow us to address key unanswered questions about lignin metabolism in nature, including: (1) Why does the Trametes versicolor genome contain 25 different class II peroxidases? (2) What is the role of laccases in lignin metabolism? Why do some aggressive lignin degraders have many laccases (e.g. >7 in T. versicolor) while others have none (e.g. P. chrysosporium)? (3) How is peroxide provided in a controlled manner to drive peroxidase activity without causing the enzyme inhibition that is so often observed in vitro? (4) What strategies do microbial lignin degraders use to avoid the problem of repolymerization during active lignin degradation? and (5) Can microbial lignin metabolism be diverted for high level production of defined aromatics? A final critical question is whether combining key minimal sets of enzymes from a wide range of organisms will result in engineered strains capable of highly efficient, streamlined pathways for lignin utilization that can be tuned for a specific carbon output. This effort will leverage DOE investments in microbial genome sequencing, and secure a critical channel for lignin biomass utilization that will also help to render lignocellulosic a viable feedstock for the production of renewable liquid biofuels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Exploring Microphase Separation in Semi-Fluorinated Diblock Copolymers: A Combined Experimental and Modeling Investigation

We report the combined experimental and theoretical study of the bulk self-assembly behavior of polystyrene-blockpoly( 2,3,4,5,6-pentafluorostyrene) diblock copolymers. These block copolymers were designed to create highly antagonistic blocks (with a high Flory−Huggins interaction parameter, χ) with minimum disruption to the molecular construct (i.e., only replacing five hydrogen atoms with five fluorine atoms). A large library of diblock copolymers (41 samples) was synthesized by reversible addition− fragmentation chain transfer (RAFT) polymerization to map out a major portion of the phase space. All block copolymers exhibited narrow molecular weight distributions with dispersity (D) values between 1.07 and 1.32, and subsequent thermal annealing revealed phase separation into well-defined nanoscale morphologies depending on their molecular composition, as determined from small-angle X-ray scattering and transmission electron microscopy analyses, with an experimental phase diagram being constructed. The χ value at 25 °C for this block copolymer was estimated to be 0.2 using strong segregation theory, based on trends in phase-separated domain spacing and interfacial width. When applying theoretical approaches, the majority of the domain spacing data trends were captured by a coil−coil diblock copolymer model; however, a better fit to the data for samples with shorter fluorinated blocks was obtained with a rod−coil model, indicating that the chains in these fluorinated blocks likely have a higher inherent stiffness and were thus rod-like. This observation demonstrates that, due to the very high value of χ, a transition from coil−coil to rod−coil behavior can be obtained purely by reducing the length of the stiffer of the two blocks and without varying temperature or the chemical composition of the polymers. Here, this work showcases the presence of strong microphase separation within AB diblock copolymers despite the relatively similar chemical composition of the constituent “A” and “B” units, with a clear transition from rod−coil to coil−coil segregation behavior.

RAFT polymerization↗
DOE OSTI2020

The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface

The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.

Shangguan, Junnan↗
DOE OSTI2023

Recombination smooths the time-signal disrupted by latency in within-host HIV phylogenies

Within-host HIV evolution involves several features that may disrupt standard phylogenetic reconstruction. One important feature is re-activation of latently integrated provirus, which has the potential to disrupt the temporal signal, leading to variation in the branch lengths and apparent evolutionary rates in a tree. Yet, real within-host HIV phylogenies tend to show clear, ladder-like trees structured by the time of sampling. Another important feature is recombination, which violates the fundamental assumption that evolutionary history can be represented by a single bifurcating tree. Thus, recombination complicates the within-host HIV dynamic by mixing genomes and creating evolutionary loop structures that cannot be represented in bifurcating trees. In this paper, we develop a coalescent-based simulator of within-host HIV evolution that includes latency, recombination, and effective population size dynamics that allows us to study the relationship between the true, complex genealogy of within-host HIV evolution, encoded as an Ancestral Recombination Graph (ARG), and the observed phylogenetic tree. To compare our ARG results to the familiar phylogeny format, we calculate the expected bifurcating tree after decomposing the ARG into all unique site trees, their combined distance matrix, and the overall corresponding bifurcating tree. While latency and recombination separately disrupt the phylogenetic signal, remarkably, we find that recombination recovers the temporal signal of within-host HIV evolution caused by latency by mixing fragments of old, latent genomes into the contemporary population. In effect, recombination averages over extant heterogeneity, whether it stems from mixed time-signals or population bottlenecks. Further, we establish that the signals of latency and recombination can be observed in phylogenetic trees despite being an incorrect representation of the true evolutionary history. Using an Approximate Bayesian Computation method, we develop a set of statistical probes to tune our simulation model to nine longitudinally-sampled within-host HIV phylogenies. Because ARGs are exceedingly difficult to infer from real HIV data, our simulation system allows investigating effects of latency, recombination, and population size bottlenecks by matching decomposed ARGs to real data as observed in standard phylogenies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Gas-phase stability of large lanthanide:diglycolamide clusters evaluated using collision-induced dissociation

Efficient utilization of long-term deep geologic storage repositories is critical for the large-scale deployment of nuclear energy. As the minor actinides (americium and curium) are the largest contributor to the decay heat of used nuclear fuel after a few hundred years, their removal from used fuel prior to disposal can significantly increase the amount of waste that can be stored in a given volume. The development of ligands that can effectively separate the minor actinides from other components of used nuclear fuel are crucial to efficient utilization of geological storage repositories. N,N,N’,N’-tetraoctyl diglycolamide (TODGA) is a promising extractant for the separation of lanthanides and the minor actinides from other components of used nuclear fuel. While the use of TODGA in f-element separations has been investigated in process-based formulations, gas-phase metal ion cluster experiments enable the study of covalent interactions in reprocessing systems absent from solvent effects. Exploring fundamental differences in lanthanide-ligand covalent interactions can impact the development and implementation of actinide-lanthanide separation systems in nuclear fuels reprocessing. In this study, lanthanide-TODGA clusters were synthesized in the gas-phase and identified using mass spectrometry fragmentation experiments. Large europium and samarium clusters were identified that contained up to 8 and 10 bound TODGA ligands, respectively; this was surprising due to the size and multidentate binding that is normal for TODGA. In addition, while smaller clusters showed evidence of sequential ligand fragmentation, larger clusters displayed the loss of neutral TODGA with applied collision voltage. Interestingly, the voltage required for this removal decreased as more TODGA ligands were bound to the metal, suggesting that the metal coordination sphere was becoming more saturated and TODGA ligands were more weakly bound as the clusters got larger.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

LipidOz enables automated elucidation of lipid carbon–carbon double bond positions from ozone-induced dissociation mass spectrometry data

Lipids play essential roles in many biological processes and disease pathology, but unambiguous identification of lipids is complicated by the presence of multiple isomeric species differing by fatty acyl chain length, stereospecifically numbered (sn) position, and position/stereochemistry of double bonds. Conventional liquid chromatography-mass spectrometry (LC-MS/MS) analyses enable the determination of fatty acyl chain lengths (and in some cases sn position) and number of double bonds, but not carbon-carbon double bond positions. Ozone-induced dissociation (OzID) is a gas-phase oxidation reaction that produces characteristic fragments from lipids containing double bonds. OzID can be incorporated into ion mobility spectrometry (IMS)-MS instruments for the structural characterization of lipids, including additional isomer separation and confident assignment of double bond positions. The complexity and repetitive nature of OzID data analysis and lack of software tool support have limited the application of OzID for routine lipidomics studies. Here, we present an open-source Python tool, LipidOz, for the automated determination of lipid double bond positions from OzID-IMS-MS data, which employs a combination of traditional automation and deep learning approaches. Our results demonstrate the ability of LipidOz to robustly assign double bond positions for lipid standard mixtures and complex lipid extracts, enabling practical application of OzID for future lipidomics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Level structure of the T z = –1 nucleus 34 Ar and its relevance for nucleosynthesis in ONe novae

The 24 Mg+ 12 C fusion reaction was used to perform a detailed γ-ray spectroscopy study of the astrophysically important nucleus 34 Ar. In particular, an experimental setup, coupling the advanced γ-ray tracking array GRETINA with the well-established Argonne fragment mass analyzer (FMA), was employed to obtain excitation energies and spin-parity assignments for excited states in 34 Ar, both above and below the proton separation energy. For the first time, an angular distribution analysis of in-beam γ rays from fusion-evaporation reactions, using a tracking array, has been performed and Coulomb energy differences of analog states in the T = 1, A = 34 mirror system, explored from 0 to 6 MeV. Lastly, we present a comprehensive discussion of the astrophysical 33 Cl(p,γ) stellar reaction rate, together with implications for the identification of nova presolar grains from sulfur isotopic abundances.

20 ≤ A ≤ 38↗
DOE OSTI2024

Multiplicity and event-scale dependent flow and jet fragmentation in pp collisions at $\sqrt{s}$ = 13 TeV and in p–Pb collisions at $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV

Long- and short-range correlations for pairs of charged particles are studied via two-particle angular correlations in pp collisions at $\sqrt{s}$ = 13 TeV and p–Pb collisions at $\sqrt{s_{\textrm{NN}}}$ = 5.02 TeV. The correlation functions are measured as a function of relative azimuthal angle Δφ and pseudorapidity separation Δη for pairs of primary charged particles within the pseudorapidity interval |η| < 0.9 and the transverse-momentum interval 1 < p T < 4 GeV/c. Flow coefficients are extracted for the long-range correlations (1.6 < |Δη| < 1.8) in various high-multiplicity event classes using the low-multiplicity template ft method. The method is used to subtract the enhanced yield of away-side jet fragments in high-multiplicity events. These results show decreasing flow signals toward lower multiplicity events. Furthermore, the flow coefficients for events with hard probes, such as jets or leading particles, do not exhibit any significant changes compared to those obtained from high-multiplicity events without any specific event selection criteria. The results are compared with hydrodynamic-model calculations, and it is found that a better understanding of the initial conditions is necessary to describe the results, particularly for low-multiplicity events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurements of jet observables sensitive to $\textit{b}$-quark fragmentation in $t\bar{t}$ events at the LHC with the ATLAS detector

Several observables sensitive to the fragmentation of $\textit{b}$ quarks into $\textit{b}$ hadrons are measured using 36 fb -1 of $\sqrt{s}$ = 13 TeV proton-proton collision data collected with the ATLAS detector at the LHC. Jets containing b hadrons are obtained from a sample of dileptonic $t\bar{t}$ events, and the associated set of charged-particle tracks is separated into those from the primary $\textit{pp}$ interaction vertex and those from the displaced b-decay secondary vertex. This division is used to construct observables that characterize the longitudinal and transverse momentum distributions of the $\textit{b}$ hadron within the jet. The measurements have been corrected for detector effects and provide a test of heavy-quark-fragmentation modeling at the LHC in a system where the top-quark decay products are color connected to the proton beam remnants. The unfolded distributions are compared with the predictions of several modern Monte Carlo parton-shower generators and generator tunes, and a wide range of agreement with the data is observed, with $\textit{p}$ values varying from 5 × 10 -4 to 0.98. These measurements complement similar measurements from $e^+e^-$ collider experiments in which the $\textit{b}$ quarks originate from a color singlet $Z/γ^{\ast}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Elucidating the Gas-Phase Behavior of Nitazene Analog Protomers Using Structures for Lossless Ion Manipulations Ion Mobility-Orbitrap Mass Spectrometry

2-benzylbenzimidazoles, or “nitazenes”, are a class of novel synthetic opioids (NSOs) that are increasingly being detected alongside fentanyl analogs and other opioids in drug overdose cases. Nitazenes can be 20x more potent than fentanyl but are not routinely tested for during postmortem or clinical toxicology drug screens; thus, their prevalence in drug overdose cases may be under-reported. Traditional analytical workflows utilizing liquid chromatography-tandem mass spectrometry (LC-MS/MS) often require additional confirmation with authentic reference standards to identify a novel nitazene. However, additional analytical measurements with ion mobility spectrometry (IMS) may provide a path towards reference-free identification, which would greatly accelerate NSO identification rates in toxicology labs. Presented here are the first IMS and collision cross section (CCS) measurements on a set of fourteen nitazene analogs using a Structures for Lossless Ion Manipulations (SLIM)-Orbitrap MS. All nitazenes exhibited two high intensity baseline-separated IMS distributions, which fentanyls and other drug and drug-like compounds also exhibit. Incorporating water into the electrospray ionization (ESI) solution caused the intensities of the higher mobility IMS distributions to increase the intensities of the lower mobility IMS distributions to decrease. Nitazenes lacking a nitro group at the R1 position exhibited the greatest shifts in signal intensities due to water. Furthermore, IMS-MS/MS experiments showed that the higher mobility IMS distributions of all nitazenes produced fragment ions with m/z 72, 100, and other low intensity fragments while the lower mobility IMS distributions only produced fragment ions with m/z 72 and 100. The IMS, solvent, and fragmentation studies provide experimental evidence that nitazenes potentially exhibit three gas-phase protomers. In conclusion, the cyclic IMS capability of SLIM was also employed to partially resolve four sets of structurally similar nitazene isomers (e.g., protonitazene/isotonitazene, butonitazene/isobutonitazene/secbutonitazene), showcasing the potential of using high-resolution IMS separations in MS-based workflows for reference-free identification of emerging nitazenes and other NSOs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Nanofilm Composite Membranes of Bottlebrush Poly(1,3‐Dioxolane) Plasticized by Poly(Ethylene Glycol) for CO 2 /N 2 Separation

Abstract Poly(1,3‐dioxolane) has emerged as a leading membrane material for post‐combustion CO 2 capture due to its high ether oxygen content and strong affinity toward CO 2 . However, they are often cross‐linked to inhibit crystallization, which makes them impossible to fabricate into industrial thin‐film composite membranes. Herein, soluble and high molecular weight bottlebrush polymers ( b PDXLA) are synthesized using reversible addition‐fragmentation chain transfer polymerization and demonstrate the feasibility of fabricating nanofilm (≈100 nm) composite membranes (NCMs). Furthermore, b PDXLA can be plasticized using a miscible additive of poly(ethylene glycol) dimethyl ether (PEGDME) to improve CO 2 permeability while retaining good CO 2 /N 2 selectivity. For example, adding 20 mass% PEGDME improves CO 2 permeance from 930 to 1300 GPU and decreases CO 2 /N 2 selectivity from 74 to 53 at 25 °C; the membrane exhibits stable separation performance competitive with state‐of‐the‐art commercial membranes. This work unveils a practical approach to designing uncross‐linked, highly polar polymers for practical membrane gas separation and highlights a facile way to enhance performance by incorporating miscible plasticizers using industrial manufacturing processes.

Zhang, Gengyi [Department of Chemical and Biologic↗