Search NASA⌕ Search

SEARCH · Search NASA

Results for “Free Volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

An exploratory study on helium mobility in amorphous and crystallized bulk metallic glasses

In this study, Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 and Cu 60 Zr 20 Hf 10 Ti 10 amorphous and crystallized bulk metallic glasses (BMGs) were implanted at room temperature by 150 keV 3 He + ions to fluences of 2 × 10 15 cm -2 and 5 × 10 15 cm -2 , producing peak implanted He concentrations of ~1,100 and 3,500 appm, respectively. Nuclear reaction analysis (NRA) performed on post-implantation annealed samples at various temperatures between 250 and 600 °C (~0.30 to 0.75 of the absolute melting temperature T m of the BMGs) revealed no appreciable He migration. Complementary thermal desorption spectroscopy (TDS) on as-implanted samples, which involved in situ annealing, showed appreciable He release only at temperatures higher than ~700 °C (~0.76-0.90 T m ) in all the samples. Half or more of the implanted He did not desorb up to the maximum investigated TDS annealing temperature of 770 °C (~0.85-0.97 T m ). The lack of pronounced He diffusion up to 600 °C as observed from the NRA and TDS data was attributed to He trapping in free volume sites present in the BMGs, which seems to play a similar role to vacancies in crystalline materials. It was also observed that in both the amorphous and crystallized forms of the Zr BMG, the sample implanted to the lower fluence released more He as compared to the sample implanted with a higher fluence. The crystalline forms of both the Cu and Zr BMGs released more He as compared to their amorphous counterparts.

36 MATERIALS SCIENCE↗

Microstructure and mechanical behavior of laser remelted amorphous Al-Ni-La welds

To explore the feasibility of using laser powder bed fusion systems to print bulk amorphous Al alloys, a single autogenous weld produced by laser remelting on a cast Al-5La-9Ni (at.%) alloy was studied for its microstructure and mechanical behavior. The solidification rates experienced by material within the welds were high enough to produce entirely amorphous regions within the welds. Welds were characterized using SEM, STEM, and APT and were found to contain Ni-rich amorphous clusters. Micropillar compression tests were used to assess mechanical properties of the welds and found that all of the amorphous regions exhibited yield strengths around 1 GPa. In conclusion, these results are discussed in the context of diffusivity of Ni and rare earth elements in liquid, glass forming ability, thermodynamic driving force for phase formation during solidification, free volume concentrations in bulk metallic glasses, and cluster-related softening.

APT↗

Wood-reinforced composites by stereolithography with the stress whitening behavior

In this study, poplar wood flour at various concentrations (1–10 wt%) is incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using stereolithography apparatus (SLA) 3D printing. Differential scanning calorimetry (DSC) along with Fourier transform infrared spectroscopy (FTIR) analysis shows the presence of a small amount of residual monomer in the printed samples. For the printed composites, the glass transition temperature (T g ) from dynamic mechanical analysis (DMA) decreases as more wood flour is incorporated, which indicates an increase in free volume occupied by polymer chains. The tensile strength is improved up to 17.3% from 21.1 MPa (no wood flour) to 24.7 MPa (1.0 wt% wood flour). The highest Young’s modulus reaches 323.8 MPa (2.0 wt% wood flour), which is 1.9-fold of that of the sample without wood flour. Moreover, the composites show “stress whitening” with the addition of wood flour during the uniaxial drawing. Morphology analysis of the tested samples show that the formation of microcraze and microvoids likely causing the stress whitening. This is the first study that demonstrates wood flour can be utilized in SLA 3D printed wood plastic composites (WPC) which can reinforce the printed products with a modest loading amount.

36 MATERIALS SCIENCE↗

Intrinsic and extrinsic effects on the fracture toughness of ductile metallic glasses

The potential application of metallic glasses (MGs) as structural materials demands accurate measurements of their toughness and the understanding of the underlying factors affecting it. Currently, it is challenging to precisely measure the toughness of MGs, especially ductile MGs. Measured toughness values are widely scattered, even for MGs with identical compositions. That is attributed to the combined effect of intrinsic and extrinsic factors including processing, sample geometries, and loading conditions. A fundamental understanding of the influences of these elements is thus of great significance. In the present study, molecular dynamics simulations are performed to investigate the influence of intrinsic and extrinsic effects on the fracture toughness of CuZr MGs. In particular, focused is placed on the effects of cooling rate, notch shape and size, strain rate, and temperature. The results indicate that the fracture toughness of a MG scales with the cooling rate used to prepare it. This is attributed to increased free volume content generated at high cooling rates, which enhances plastic deformation and amplifies the associated energy dissipation during plastic deformation events. Fracture toughness also increases with the strain rate, arguably due to strain rate-induced crack extension delay. Overall, the results demonstrate that the largest fracture toughness are achieved when MG samples are fabricated at high cooling rates and subjected to high strain rate deformation. In addition, results suggest that the fracture toughness decreases with increasing temperature, due to the significant decrease in strength. Here, the correlations revealed between these crucial intrinsic and extrinsic parameters and the calculated MG fracture toughness support the development of a framework to understand the root of the discrepancies in the measurement of the toughness of MGs and provide insights into the design of tough MGs for structural applications.

36 MATERIALS SCIENCE↗

Framework for predicting the fractionation of complex liquid feeds via polymer membranes

The separation of complex liquid hydrocarbon mixtures was recently demonstrated using the glassy polymer SBAD-1, showing that small molecule fractionation is possible by such organic membrane materials. Here, in this work, we develop a framework that will enable workable predictions of permeate flux and composition in complex hydrocarbon liquids through intrinsically porous glassy polymers. The predictions are made by incorporating experimentally-derived unary sorption and diffusion parameters in a Maxwell-Stefan framework coupled with multicomponent sorption models and various distinct diffusion phenomena. Across the range of sorption and diffusion phenomena considered, both the conventional Flory-Huggins model and the proposed Langmuir + Flory-Huggins sorption model combined with a simple average guest diffusivity or a more complex free-volume theory-based transport resulted in the lowest prediction error for three chosen multicomponent separations. The proposed Maxwell-Stefan framework simply requires pure component transport parameters to allow a fast approximation of the separation of multicomponent liquid hydrocarbon feeds that can potentially be extended to more complex feeds such as crude oil fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water and salt transport properties of pentiptycene-containing sulfonated polysulfones for desalination membrane applications

A series of pentiptycene-containing disulfonated polysulfone copolymers (PENT-BP) were synthesized via condensation polymerization. Water and salt transport properties (solubility, diffusivity and permeability) were characterized for acid-form membranes (PENT-BP(H)) and compared with triptycene-based sulfonated polysulfones (TRP-BP(H)) and a non-iptycene-containing 4,4'-biphenol-based series (BPS(H)) of polysulfones to investigate the effect of pentiptycene on membrane performance. At comparable water content, the PENT-BP(H) exhibited increased water and salt permeability due to the additional free volume introduced by the pentiptycene units. Enhanced water/salt permeability selectivity of PENT-BP(H) series was also observed due to a significantly higher diffusivity selectivity. At comparable water permeance (P w D ~ 8 X 10 -6 cm 2 /s), the salt rejection of PENT-BP (H) copolymers obtained from dead-end filtration reached 91–93% at 400 psi, higher than that of a corresponding BPS(H) series. This study suggests that incorporation of iptycene moieties into polymer backbone is an effective strategy to enhance desalination membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas transport characteristics of supramolecular networks of metal-coordinated highly branched Poly(ethylene oxide)

Model systems are developed and investigated to better understand the effect of polyether-metal ion interactions on gas separation characteristics. These systems help answer current questions raised by the substantial body of research on metal-organic frameworks (MOFs) dispersed in polyethers to improve gas separation performance, where favorable interactions between the metal centers and polyethers are preferred to improve interfacial compatibility. Specifically, we investigate CO 2 /gas transport properties of supramolecular networks comprising cross-linked poly(ethylene oxide) (XLPEO) and dissociable salts, including LiClO 4 , Ni(BF 4 ) 2 , and Cu(BF 4 ) 2 . Increasing the salt content increases the glass transition temperature (T g ) and generally decreases gas diffusivity and permeability, which can be successfully described using a T g -integrated free volume model with an expression similar to the Vogel-Tammann-Fulcher (VTF) equation. Surprisingly, low loadings of LiClO 4 and Cu(BF 4 ) 2 (2 mass% or less) can increase gas permeability by 30%–70% without affecting the CO 2 /gas selectivity. This increase correlates with polyether-metal ion dynamics as measured by dielectric spectroscopy. Understanding how interaction-mediated dynamics affect gas transport will be instrumental to designing MOF-based mixed matrix materials for gas separations.

36 MATERIALS SCIENCE↗

Molecular insights into the structure-property relationships of 3D printed polyamide reverse-osmosis membrane for desalination

3D-printing is an emerging method for manufacturing polyamide (PA) reserve osmosis (RO) membranes for water treatment and desalination, which can precisely control membrane structural properties, such as thickness, roughness, and resolution. However, the synthesis-structure (i.e., degree of cross-linking (DC), m-phenylenediamine/trimesoyl chloride (MPD/TMC) ratio, and membrane thickness) to property (permeability and water-salt selectivity) relationships for these membranes has not been well understood. At the same time, a microscopic understanding of the physical mechanism of water and salt transport is needed to guide the design of high-performance 3D-printed membranes and improve the printing efficiency. Furthermore, the atomic-scale transport features and energetics of water and salt ions are studied at high pressure for the 3D-printed PA RO membranes with the different DCs and MPD/TMC ratios through non-equilibrium molecular dynamics (NEMD) simulations. Factoring in membrane structure properties, rejection ratio of salt ions and pressure-dependent water flux, 3D-printed PA membranes having an MPD/TMC ratio of 3.0:2.0 and a DC between 80%~90% attains ideal performance: high water flux, high rejection of salt ions, and excellent structural integrity. Mechanistically, water permeability for highly cross-linked PA RO membranes depends on the temporary on-and-off channels that allow water molecules to jump from one cavity to another at high pressure. In addition, higher pressures cause rapid compaction of PA membranes’ free volume and membrane thickness. Membrane failure at high pressure is determined by the DC and MPD/TMC ratios-dependent compressive yield strength. In short, these findings provide physical insights for optimizing existing PA membranes and designing next-generation desalination membranes at the molecular level.

3D-printed PA RO membrane↗

Role of side-chain length on gas transport of CO 2 /CH 4 mixtures in polymers with side-chain porosity

Polymers of intrinsic microporosity (PIMs) are traditionally formed from ladder backbones, but recent synthetic advances have allowed for the formation of non-traditional PIMs using a poly(ladder) motif, whereby rigid PIM-like sidechains are appended onto more flexible backbones. The effect of side-chain length on free volume and gas transport properties was recently evaluated for a methoxy-functionalized poly(ladder) (OMe-ROMP). In this study, we elaborate on the role of side-chain length and its influence on mixed-gas performance and plasticization stability for OMe-ROMP. Pure-gas sorption results are also reported, including hysteresis effects from CO 2 conditioning. Taken together, this study reveals the role of side-chain length on gas sorption, diffusion, and plasticization for CO 2 /CH 4 separations. Finally, we conclude that the length of a rigid side chain in the poly(ladder) motif is a valuable structural parameter to control sorption, diffusion, and stability towards plasticization for gas separation membrane materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finely tuning the microporosity in phosphoric acid doped triptycene-containing polybenzimidazole membranes for highly permselective helium and hydrogen recovery

High-performance polymer membranes with well-defined microporosity and size-sieving ability are especially attractive for helium and hydrogen recovery. Here, in this study, we report novel macromolecular engineering of polybenzimidazole (PBI) membranes that integrate hierarchical triptycene units for high permeability and polyprotic acid doping for size sieving via controllable manipulation of microporous architecture. The triptycene moieties disrupt chain packing and introduce additional configurational free volume, leading to significantly boosted He and H 2 permeabilities compared to previously reported PBI membranes. The acid doping resulted in crosslinked PBI membranes via hydrogen bonding and proton transfer with dramatically enhanced gas selectivities. Via adjusting the H 3 PO 4 -doping level, triptycene-based polybenzimidazole (TPBI) composite membranes (TPBI-(H 3 PO 4 ) x ) exhibit the highest gas selectivities for He enrichment (i.e., α(He/CH 4 ) = 7052 ± 156) and H 2 purification (i.e., α(H 2 /CH 4 ) = 5128 ± 110) among existing polymeric gas separation membranes. Additionally, under mixed-gas conditions at 150 °C, the TPBI-(H 3 PO 4 ) 0.98 membrane displays a H 2 permeability of 46.7 Barrer and a H 2 /CO 2 selectivity of 16, far beyond the Robeson's 2008 upper bound for H 2 /CO 2 separation. The facile and diverse tunability and excellent gas separation performance make TPBI-(H 3 PO 4 ) x membranes highly attractive for helium and hydrogen separation.

42 ENGINEERING↗

Molecular dynamics simulations of a dicationic ionic liquid for CO 2 capture

A dicationic ionic liquid ([DBU-PEG][Tf 2 N] 2 ) was studied using classical molecular dynamics simulations to examine its structural and gas separation properties. The dication was designed in an attempt to improve CO 2 solubility by means of tuning the cation-anion interactions of the ionic liquid (IL). The computational model was compared to experimentally obtained density, viscosity, and powder X-ray diffraction spectra. The structure of the IL was further investigated with radial distribution functions and free volume analysis through cavity distributions. It was found that the shape and charge distribution of the dication enhances CO 2 interaction: the CO 2 molecule is hugged by the dication along the PEG linker and close to one of the cationic ends. Here, the geminal design of the dication allows for strong interaction with CO 2 , showing promise as a means of carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glassy polymers: Historical findings, membrane applications, and unresolved questions regarding physical aging

Polymers below their glass transition temperature (Tg) are non-equilibrium glasses because excess free volume “frozen” between kinetically-restricted polymer chains slowly relaxes over time towards equilibrium via local, segmental chain motion. This process, known as physical aging, is observed through time-dependent decreases in a polymer's specific volume, enthalpy, etc. This article focuses on the history of glassy polymers in membrane separation applications. Open questions regarding the influence of thickness (e.g., membrane geometry) and temperature on physical aging in glassy polymers are highlighted.

36 MATERIALS SCIENCE↗

Alloying induces directionally-dependent mobility and alters migration mechanisms of faceted grain boundaries

Faceted grain boundaries exhibit unusual segregation and migration tendencies. To gain a deeper understanding of how solute atoms interact with faceted interfacial structures during migration, this study probes the migration behavior of a faceted Σ11 boundary in Cu doped with Ag atoms. Furthermore, the solutes are found to segregate to the facet with more free volume and strongly reduce boundary velocity in one migration direction, but not the other, due to the presence of a directionally-dependent motion mechanism that can escape solute pinning and therefore speed up migration. Hence, a new mechanism of chemically-induced anisotropy in grain boundary mobility is uncovered by these simulations.

36 MATERIALS SCIENCE↗

Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

The development of solid-state polymer electrolytes with high lithium conductivity is crucial to improve lithium-ion battery performance and ameliorate the safety challenges associated with current solvent-based electrolytes. Unfortunately, sluggish polymer segmental dynamics are known to constrain conductivity enhancements in solid-state polymer electrolyte systems, limiting overall performance. In this work, a glassy single-ion-conducting polymer, poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] (PLiMTFSI), was blended with a flexible polymer, poly(oligo-oxyethylene methyl ether methacrylate) (POEM), and the impact of PLiMTFSI molecular weight and ion concentration on the thermal and ion-conducting behavior of blend electrolytes was investigated. High ionic conductivities approaching 1 × 10 -2 S/cm at 150 °C were realized in this polymer blend electrolyte system as a result of decoupling Li + transport from polymer segmental dynamics. The decoupled ion transport was attributed to the packing frustration of the glassy PLiMTFSI – sufficient percolating free volume was generated to produce effective ion diffusion pathways. This decoupling was tunable as the ion transport could be altered from being closely coupled to the polymer segmental dynamics (Vogel–Tammann–Fulcher-like) to hopping (Arrhenius-like) by increasing the PLiMTFSI molecular weight and ion concentration. Moreover, the immobilized TFSI anion resulted in high Li + selectivity (Li + transference number = 0.9), high electrochemical stability (up to 4.7 V against Li + / Li), and limiting current density of 1.8 mA/cm 2 (electrolyte thickness = 0.05 cm). These features suggest that this single-ion-conducting, polymer blend electrolyte might be a promising alternative to a benchmark system – salt-doped polyethylene oxide. Moreover, the above characteristics can support the battery operation at higher voltages using energy-dense Li metal anodes, with faster charging rates and enhanced energy/power densities. Altogether, the results suggest that polymer chain packing frustration can be exploited to overcome the constraints of slow polymer segmental relaxations to achieve rapid and highly selective ion transport and enhanced performance in solid-state polymer electrolytes.

36 MATERIALS SCIENCE↗

Assessing Composite Structure in Metal–Organic Framework-Polymer Mixed-Matrix Membranes

Metal-organic frameworks (MOFs) are renowned for their tunable structure, porosity, and internal chemistry, with demonstrated applications in molecular separations, storage, and conversion. While they are widely usable, the powdery characteristics of MOF materials can be limiting for large-scale processing and implementation in devices. Incorporating MOF particles into polymer supports affords engineering solutions to overcome these issues, yet the nature of the resulting composites is difficult to assess. Here, in this work, we present spectroscopic and calorimetric methods that we believe help establish a holistic physicochemical picture of the composite structure using a series of Zr MOFs with different pore sizes as a testbed. Power law decays are observed in X-ray scattering profiles in low q-space ranging between 2.4 and 3.3, which we interpret as changes in scattering due to polymer infiltrating MOF particles. This interpretation is supported by solid-state nuclear magnetic resonance spectroscopy and differential scanning calorimetry measurements that identify populations of the MOF-associated polymer. Additionally, positron annihilation lifetime spectroscopy measurements collected on a series of composites with different MOF-polymer ratios show multiple decay constants, each correlated to a different free volume elements. In combination with the spectroscopic, calorimetric, and scattering results, we utilize the trends in decay constants as a function of polymer mass fraction to hypothesize a polymer infiltration mechanism whereby large pores are preferentially filled, followed by small pores and, later still, interstitial spaces between particles. Even with vigorous investigation of polymer, MOF, and interface characteristics, the complex and heterogeneous nature of the composites makes absolute structural assertions difficult. We envision that the approaches demonstrated here will be a useful foundation to assess and ultimately guide the design of future MOF-polymer composites.

36 MATERIALS SCIENCE↗

Alumina Priming-Mediated Enhanced Binding of Diethylzinc with Carbonyl Groups in Poly(Methyl Methacrylate) during Vapor-Phase Infiltration

Vapor-phase infiltration (VPI) of inorganic materials in polymers is increasingly becoming popular for synthesizing various functional hybrid materials. While AlO x infiltration using trimethylaluminum (TMA) has been extensively studied, the mechanism of diethylzinc (DEZ)-based ZnO x infiltration, especially one that is initiated by AlO x priming, has not received much attention because highly reactive hydroxyl groups generated by AlO x -priming are expected to dominate the initial binding of DEZ, thus enabling the overall ZnO x VPI. Here, we interrogate the ZnO x infiltration mechanism in AlO x -primed poly(methyl methacrylate) (PMMA) in comparison to the control AlO x -only infiltration by utilizing a suite of complementary characterizations, including quartz crystal microbalance mass gain measurement, transmission electron microscopy, infrared reflection–absorption spectroscopy (IRRAS), and synchrotron X-ray absorption spectroscopy (XAS). The multivalent TMA precursor and associated hyperbranched AlO x network can quickly saturate the AlO x infiltration by clogging the polymer-free volume near the top. On the contrary, the ZnO x infiltration using divalent DEZ precursor, once activated via AlO x -priming, can lead to accelerated ZnOx infiltration. With the help of IRRAS, XAS, and density functional theory (DFT) simulations, we uncover that the AlO x -priming enhances the reactivity of neighboring carbonyl groups toward DEZ and opens up simultaneous reaction pathways, leading to accelerated high-fidelity infiltration of ZnO x .

36 MATERIALS SCIENCE↗

Raman Microscopy Investigation of GLP-1 Peptide Association with Supported Phospholipid Bilayers

A wide range of important biological processes occur at phospholipid membranes including cell signaling, where a peptide or small molecule targets a membrane-localized receptor protein. In this work, we report the adaptation of confocal-Raman microscopy to quantify populations of unlabeled glucagon-like peptide-1 (GLP-1), a membrane-active 30-residue incretin peptide, in supported phospholipid bilayers deposited on the interior surfaces of wide-pore porous silica particles. Quantification of lipid bilayer-associated peptide is achieved by measuring the Raman scattering intensity of the peptide relative to that of the supported-lipid bilayer, which serves as an internal standard. The dependence of the bilayer-associated GLP-1 population on the solution-concentration of GLP-1 produces an isotherm used to determine the equilibrium constant for peptide-bilayer association and the maximum peptide surface coverage. The maximum coverage of GLP-1 in the lipid bilayer was found to be only 1/5th of a full monolayer based on its hydrodynamic radius. The saturation coverage, therefore, is not limited by the size of GLP-1 but by the ability of the bilayer to accommodate the peptide at high concentrations within the bilayer. Raman spectra show that GLP-1 association with the supported bilayer is accompanied by structural changes consistent with the intercalation of the peptide into bilayer, where the observed increase in acyl-chain order would increase the lipid density and provide free volume needed to accommodate the peptide. Furthermore, these results were compared with previous measurements of the association of fluorescently-labeled GLP-1 with a planar-supported bilayer; the unlabeled peptide exhibits a 3-fold greater affinity for the lipid-bilayer on the porous-silica support suggesting that the fluorescent label alters GLP-1 lipid-bilayer association.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unexpected Thermomechanical Behavior of Off-Stoichiometry Epoxy/Amine Materials

Recent studies on off-stoichiometric thermosets reveal unique viscoelastic behavior derived from increased free volume and physical interactions between chain ends. To understand structural characteristics arising from cure and its effect on properties, we developed a Monte Carlo model based on step-growth polymerization. Our model accurately predicted structure–property trends for a two-component system of EPON 828 (EPON) and ethylenediamine. A second epoxy monomer, D.E.R. 732 (DER), was investigated to modulate T g . Binary mixtures of EPON and DER in off-stoichiometric, amine-rich formulations resulted in nonlinear evolution of thermomechanical properties with respect to initial formulation stoichiometry. Modifying our model with kinetic parameters allowing for differential epoxide/amine reaction kinetics only partially accounted for trends in T g , suggesting that spatiotemporal contributions-not captured by our model-were significant determinants of material properties compared to polymer architecture for three-component systems. Here these findings underpin the importance of spatial awareness in modeling to inform the development of dynamic thermosets.

36 MATERIALS SCIENCE↗