Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

A vented inverted fuel assembly design for an SFR

The inverted geometry (fuel outside coolant tubes) has been previously investigated at MIT for application in gas-cooled fast reactors and pressurized water-cooled thermal reactors. Venting has also been studied for conventional fuel pins and was employed for those in the Dounreay Fast Reactor. In the present work the inverted fuel approach was adopted because it allows high fuel volume fraction, reduction of the coolant void reactivity, neutron leakage and enrichment, as well as lower pressure drop for the same channel length because grids and wire wraps are no longer necessary. Furthermore most results also apply to venting of conventional fuel pins. Physical and chemical behavior of volatile fission products in sodium was investigated to determine the maximum activity inventory which would eventually be released into the primary sodium. Results of this analysis show that the most troublesome radionuclides in terms of propensity to escape from the venting system are noble gases ({sup 85}Kr and {sup 133}Xe), and cesium ({sup 134}Cs and {sup 137}Cs). A final vented inverted fuel assembly design is proposed which meets all the design goals which have been set. Additionally purification systems were devised to reduce radionuclide activity of the coolant and the cover gas to tolerable levels. It is concluded that vented inverted (or vented conventional pin) fuel is a feasible concept and has sufficiently promising advantages - increasing fuel volume fraction to 50% and core outlet temperature by 20 deg. C, hence incrementing plant thermal efficiency by about 1% - to warrant serious consideration for future SFR designs. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Fuel characteristics pertinent to the design of aircraft fuel systems

Because of the importance of fuel properties in design of aircraft fuel systems the present report has been prepared to provide information on the characteristics of current jet fuels. In addition to information on fuel properties, discussions are presented on fuel specifications, the variations among fuels supplied under a given specification, fuel composition, and the pertinence of fuel composition and physical properties to fuel system design. In some instances the influence of variables such as pressure and temperature on physical properties is indicated. References are cited to provide fuel system designers with sources of information containing more detail than is practicable in the present report.

Barnett, Henry C↗

Aircraft-Fuel-Tank Design for Liquid Hydrogen

Some of the considerations involved in the design of aircraft fuel tanks for liquid hydrogen are discussed herein. Several of the physical properties of metals and thermal insulators in the temperature range from ambient to liquid-hydrogen temperatures are assembled. Calculations based on these properties indicate that it is possible to build a large-size liquid-hydrogen fuel tank which (1) will weigh less then 15 percent of the fuel weight, (2) will have a hydrogen vaporization rate less than 30 percent of the cruise fuel-flow rate, and (3) can be held in a stand-by condition and readied for flight in a short time.

Reynolds, T W↗

Fuel cell design and assembly

The present invention is directed to a novel bipolar cooling plate, fuel cell design and method of assembly of fuel cells. The bipolar cooling plate used in the fuel cell design and method of assembly has discrete opposite edge and means carried by the plate defining a plurality of channels extending along the surface of the plate toward the opposite edges. At least one edge of the channels terminates short of the edge of the plate defining a recess for receiving a fastener.

Myerhoff, Alfred↗

Design and Testing of Prototypic Elements Containing Monolithic Fuel

The US fuel development team has performed numerous irradiation tests on small to medium sized specimens containing low enriched uranium fuel designs. The team is now focused on qualification and demonstration of the uranium-molybdenum Base Monolithic Design and has entered the next generation of testing with the design and irradiation of prototypic elements which contain this fuel. The designs of fuel elements containing monolithic fuel, such as AFIP-7 (which is currently under irradiation) and RERTR-FE (which is currently under fabrication), are appropriate progressions relative to the technology life cycle. The culmination of this testing program will occur with the design, fabrication, and irradiation of demonstration products to include the base fuel demonstration and design demonstration experiments. Future plans show that design, fabrication, and testing activities will apply the rigor needed for a demonstration campaign.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

LH2 fuel tank design for SSTO

This report will discuss the design of a liquid hydrogen fuel tank constructed from composite materials. The focus of this report is to recommend a design for a fuel tank which will be able to withstand all static and dynamic forces during manned flight. Areas of study for the design include material selection, material structural analysis, heat transfer, thermal expansion, and liquid hydrogen diffusion. A structural analysis FORTRAN program was developed for analyzing the buckling and yield characteristics of the tank. A thermal analysis Excel spreadsheet was created to determine a specific material thickness which will minimize heat transfer through the wall of the tank. The total mass of the tank was determined by the combination of both structural and thermal analyses. The report concludes with the recommendation of a layered material tank construction. The designed system will include exterior insulation, combination of metal and organize composite matrices and honeycomb.

Wright, Geoff↗

Conceptual design of fuel transfer cask for Reactor TRIGA PUSPATI (RTP)

Spent fuel transfer cask is used to transfer a spent fuel from the reactor tank to the spent fuel storage or for spent fuel inspection. Typically, the cask made from steel cylinders that are either welded or bolted closed. The cylinder is enclosed with additional steel, concrete, or other material to provide radiation shielding and containment of the spent fuel. This paper will discuss the Conceptual Design of fuel transfer cask for Reactor TRIGA Puspati (RTP)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of fuel nozzle design on performance of an experimental annular combustor using natural gas fuel

Tests of various fuel nozzles were conducted with natural gas fuel in a full-annulus combustor. The nozzles were designed to provide either axial, angled, or radial fuel injection. Each fuel nozzle was evaluated by measuring combustion efficiency at relatively severe combustor operating conditions. Combustor blowout and altitude ignition tests were also used to evaluate nozzle designs. Results indicate that angled injection gave higher combustion efficiency, less tendency toward combustion instability, and altitude relight characteristics equal to or superior to those of the other fuel nozzles that were tested.

Wear, J. D.↗

Current TRISO Fuel Performance Capabilities and Considerations for Expanded Operational Envelopes

Current TRISO Fuel Performance Capabilities and Considerations for Expanded Operational Envelopes. US-DOE TRISO Fuel Development, AGR Fuel Design and Performance Requirements, AGR Program Fuel Irradiations, UCO Fuel Performance Evaluation Results, Performance Limiting Phenomena, Coated-Particle-Fueled Reactor Concepts and Fuel Designs, Expanded Fuel Performance Envelope, and Accelerated Fuel Qualification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fuel characteristics pertinent to the design of aircraft fuel systems, Supplement I : additional information on MIL-F-7914(AER) grade JP-5 fuel and several fuel oils

Since the release of the first NACA publication on fuel characteristics pertinent to the design of aircraft fuel systems (NACA-RM-E53A21), additional information has become available on MIL-F7914(AER) grade JP-5 fuel and several of the current grades of fuel oils. In order to make this information available to fuel-system designers as quickly as possible, the present report has been prepared as a supplement to NACA-RM-E53A21. Although JP-5 fuel is of greater interest in current fuel-system problems than the fuel oils, the available data are not as extensive. It is believed, however, that the limited data on JP-5 are sufficient to indicate the variations in stocks that the designer must consider under a given fuel specification. The methods used in the preparation and extrapolation of data presented in the tables and figures of this supplement are the same as those used in NACA-RM-E53A21.

Barnett, Henry C↗

Irradiation Performance of U-Mo Alloy Based ‘Monolithic’ Plate-Type—Design Selection Update

Based on data available in 2009, a decision was made to focus U–Mo monolithic fuel development and qualification efforts on a single fuel design. This fuel design consists of a U–10Mo (wt.%) monolithic fuel foil, a zirconium barrier layer applied to the faces of the foil, and 6061 aluminum cladding. This document updates the basis for the selection of that fuel system, drawing on additional fuel-performance data available as of May 2013. This update also applies recently developed GTRI (Global Threat Reduction Initiative) requirements for fuel qualification to the selection process. Because of its inherent gamma-phase stability and qualitatively better rolling behavior, U–10Mo was selected as the fuel alloy of choice, exhibiting reasonable uranium density and good irradiation performance. A zirconium barrier layer between the fuel and cladding was chosen to provide a predictable, well-bonded, fuel-cladding interface, greatly reducing fuel-cladding chemical interaction. The fuel plate testing conducted to inform this selection was based on the use of U–10Mo foils fabricated by hot- and cold co-rolling with a Zr foil. The foils were subsequently bonded to the Al–6061 cladding by hot isostatic pressing or friction stir welding. Since the original down-select decision was made, additional information has become available on fuel performance and on the cost of the fuel system. Preliminary cost estimates indicate that U–Mo-Zr waste generated during fabrication is difficult to recycle and adds substantially to the production cost. It is the purpose of this report to review fuel-performance data available as of May 2013, outline data and observations that are significant to informing the down-selection process, review the data against down-select requirements, and update the recommendation on a fuel system suitable for fuel qualification. In addition, this report assesses the potential of a fuel system without a zirconium barrier layer for use in USNRC-licensed research reactors. This revised report is issued as a working draft for discussion by the United States High Performance Research Reactor (USHPRR) program. The document will continue to be revised as additional information becomes available. This may include updates to information about normal and anticipated transient fuel operating conditions as conversion fuel-element designs evolve or additional information on fuel performance gained from U.S. or international testing programs. In particular, information from the RERTR–12 experiment will be included when available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The role of fracture mechanics in the design of fuel tanks in space vehicles

With special reference to design of fuel tanks in space vehicles, the principles of fracture mechanics are reviewed. An approximate but extremely simple relationship is derived among the operating stress level, the length of crack, and the number of cycles of failure. Any one of the variables can be computed approximately from the knowledge of the other two, if the loading schedule (mission of the tank) is not greatly altered. Two sample examples illustrating the procedures of determining the allowable safe operating stress corresponding to a set of assumed loading schedule are included. The selection of sample examples is limited by the relatively meager available data on the candidate material for various stress ratios in the cycling.

Denton, S. J.↗

A Theoretical Investigation of the Chemical Behaviour of Irradiated U-Mo/Mg Fuel

A significant international effort has been put forth to replace Highly Enriched Uranium (HEU) fuel used in research and test reactors with Low Enriched Uranium (LEU) fuel to reduce proliferation concerns. Furthermore, some fuel processing issues have been encountered with some LEU candidate fuel designs. In order to address both of the foregoing issues, new fuel designs must be developed. One of these designs has U-Mo particles dispersed in a Mg matrix (U-Mo/Mg) that is cladded in an Al-alloy. While characterization analyses and thermophysical measurements have been reported for fresh U-Mo/Mg fuel, the effects of irradiation are not yet well known nor are they understood. Given that earlier international campaigns that investigated U-Mo/Al as a candidate fuel design resulted in consistent failures due to the formation of an interaction layer between the U-Mo fuel particles and Al meat, it seems prudent to theorize and predict any phases that may form as a result of irradiation of U-Mo/Mg fuel. The formation of these phases and any interaction that they may have with the cladding may potentially affect the reliability of this fuel design. This short paper provides a preliminary theoretical framework for the prediction of minor phases that may appear in irradiated U-Mo/Mg research reactor fuel, which should be confirmed via postirradiation examination at a later time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High Flux Isotope Reactor Low-Enriched Uranium High Density Silicide Fuel Preliminary Design Update: System Transient Analysis

As a part of conversion efforts from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel under direction of the National Nuclear Security Administration of the U.S. Department of Energy, multiple proposed designs of the High Flux Isotope Reactor (HFIR) have been created and assessed regarding reactor physics performance metrics, including designs utilizing uranium silicide dispersion fuel (U3Si2-Al). This report updates the previous analyses that evaluated the nuclear safety performance of LEU fuel designs with respect to selected accident events from the HFIR Safety Analysis Report (SAR). Both the Low Density (LD) and High Density (HD) Optimized designs’ reactivity initiated accident fuel performance improved relative to the HEU fuel, attributed to greater 238 U negative Doppler feedback. However, the thermal margins for primary coolant system accidents were reduced with some acceptance criteria unable to be met. The need to resolve reduced thermal margin, open modeling items, and unresolved assumptions was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Options Study Documenting the Fast Reactor Fuels Innovative Design Activity

This document provides presentation and general analysis of innovative design concepts submitted to the FCRD Advanced Fuels Campaign by nine national laboratory teams as part of the Innovative Transmutation Fuels Concepts Call for Proposals issued on October 15, 2009 (Appendix A). Twenty one whitepapers were received and evaluated by an independent technical review committee.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An assessment of alternative fuel cell designs for residential and commercial cogeneration

A comparative assessment of three fuel cell systems for application in different buildings and geographic locations is presented. The study was performed at the NASA Lewis Center and comprised the fuel cell design, performance in different conditions, and the economic parameters. Applications in multifamily housing, stores and hospitals were considered, with a load of 10kW-1 MW. Designs were traced through system sizing, simulation/evaluation, and reliability analysis, and a computer simulation based on a fourth-order representation of a generalized system was performed. The cells were all phosphoric acid type cells, and were found to be incompatible with gas/electric systems and more favorable economically than the gas/electric systems in hospital uses. The methodology used provided an optimized energy-use pattern and minimized back-up system turn-on.

Wakefield, R. A.↗

Dynamical System Scaling Application to Zircaloy Cladding Thermal Response During Reactivity-Initiated Accident Experiment

New fuel design and development currently requires 20 to 25 years to be qualified for use by the nuclear power industry. The thermal-hydraulics community has taken advantage of scaling theory to design reduced scale experiments that correctly preserve dominant key phenomena while quantifying distorted phenomena. These techniques can be leveraged in the design and analysis of fuel performance experiments to help reduce the timeline associated with fuel design and development. This study uses the Dynamical System Scaling (DSS) method to analyze cladding temperature data from the recent SETH-C experiment in the TREAT facility and accompanying BISON simulations to assess dynamic distortions occurring throughout the fast power excursion transient. The DSS analysis revealed that on the cool down from peak cladding temperature that the fuel radial power profile is the most sensitive modeling parameter with a heterogenous radial peaking factor corresponding to the lowest distortion compared to a uniform energy deposition. For the heat up to peak cladding temperature the heterogeneous radial power profile corresponded to the shortest process action. Finally, for the heat up to peak cladding temperature, the gap conductance model sensitivity was quantified using process action and shows that the default Light Water Reactor gap conductance model corresponded to the longest process action.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗