Search NASA⌕ Search

SEARCH · Search NASA

Results for “GCD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Impact of Glen Canyon Generation Loss

Colorado River Basin hydropower generation has faced challenges due to droughts and ecological and social water requirements. Specifically, Glen Canyon hydropower generation fluctuates substantially with recent extreme weather trends. Further, the western grid evolves with higher wind and solar share, and Glen Canyon hydropower's contribution to grid flexibility services is essential. The Western Area Power Administration (WAPA) markets and schedules electricity production at GCD, and the loss of this power could have significant financial consequences for the WAPA Colorado River Storage Project's (CRSP) Office because it may need to purchase relatively large amounts of energy to serve its firm electrical obligations. In addition, GCD provides grid reliability services for the WAPA Colorado-Missouri (WACM) balancing authority (BA). Both WAPA and DOE's Water & Power Technology Office (WPTO) are interested in researching how these drier hydrological conditions will impact federal electrical energy production, the Western Electricity Coordinating Council (WECC) power grid, and the value of hydropower in the face of lower production. We study multiple hydrologic and power grid scenarios to understand the grid impacts of the loss of Glen Canyon generation. The study uses a production cost model, water resources planning models, water-centric grid models, and various data analytic techniques. The study progress presentation discusses the selection of probable CRSP' hydropower scenarios and power grid scenarios to understand the impacts of Glen Canyon generation, which includes technologies that compensate the Glen Canyon energy and ancillary services contributions, transmission availability, and energy local marginal prices at interested grid locations of WAPA operation.

droughts↗

Quantum vacua of 2d maximally supersymmetric Yang-Mills theory

Here, we analyze the classical and quantum vacua of 2d N = (8,8) supersymmetric Yang-Mills theory with SU( N ) and U( N ) gauge group, describing the worldvolume interactions of N parallel D1-branes with flat transverse directions R 8 . We claim that the IR limit of the SU( N ) theory in the superselection sector labeled M (mod N ) — identified with the internal dynamics of ( M , N )-string bound states of the Type IIB string theory — is described by the symmetric orbifold N = (8,8) sigma model into (R 8 )D–1/SD when D = gcd( M , N ) > 1, and by a single massive vacuum when D = 1, generalizing the conjectures of E. Witten and others. The full world volume theory of the D1-branes is the U( N ) theory with an additional U(1) 2-form gauge field B coming from the string theory Kalb-Ramond field. This U( N ) + B theory has generalized field configurations, labeled by the Z-valued generalized electric flux and an independent Z N -valued ’t Hooft flux. We argue that in the quantum mechanical theory, the ( M , N )-string sector with M units of electric flux has a Z N -valued discrete θ angle specified by M (mod N ) dual to the ’t Hooft flux. Adding the brane center-of-mass degrees of freedom to the SU( N ) theory, we claim that the IR limit of the U( N ) + B theory in the sector with M bound F-strings is described by the N = (8,8) sigma model into Sym D (R 8 ). We provide strong evidence for these claims by computing an N = (8,8) analog of the elliptic genus of the UV gauge theories and of their conjectured IR limit sigma models, and showing they agree. Agreement is established by noting that the elliptic genera are modular-invariant Abelian (multi-periodic and meromorphic) functions, which turns out to be very restrictive.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electrochemical Investigations of Magnetic Co{sub 3}O{sub 4} Nanoparticles as an Active Electrode for Supercapacitor Applications

This attempt reports on cobalt oxide (Co{sub 3}O{sub 4}) nanoparticles (NPs) prepared through the traditional chemical reflux method to examine the behavior of supercapacitor performance. The synthesized NPs were characterized using several analytical tools such as ultraviolet-visible spectroscopy (UV), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) pattern, and scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDX). Moreover, the electrochemical performance was analyzed using galvanostatic charge and discharge studies (GCD), cyclic voltammetry (CV) studies as well as electrochemical impedance spectroscopy (EIS). The cubical phase of Co{sub 3}O{sub 4} was identified from the XRD pattern and also the average crystalline size was measured by Scherrer’s equation. FTIR confirmed the functional group of Co{sub 3}O{sub 4} NPs. SEM images revealed the hexagonal-shaped nanoflakes-like morphology of the sample. From the elemental analysis, the formation of pure Co{sub 3}O{sub 4} NPs by means of high purity and composition ratio of cobalt with oxygen was found. Vibrating sample magnetometer (VSM) plot scrutinized the magnetic performance of Co{sub 3}O{sub 4} NPs{sub .} The Co{sub 3}O{sub 4} NPs modified electrode has delivered maximum specific capacitance as 1413 Fg{sup −1} at a current density of 1 Ag{sup −1} which maintains tremendous cycling stability within the retention ratio of 98.4% after 1000 cycles. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Annealing on Microstructure, Electrochemical, and Magnetic Properties of Co-Doped SrTiO{sub 3} Nanocubes

Effect of annealing on microstructure, electrochemical, and magnetic properties of Co-doped SrTiO{sub 3} nanocubes obtained by the hydrothermal method was studied. X-ray diffraction (XRD) results of all as-prepared and annealed Co-doped SrTiO{sub 3} samples revealed a cubic perovskite structure with the second phases of SrCO{sub 3} and Co{sub 3}O{sub 4}in as-prepared and annealed SrTi{sub 0.90}Co{sub 0.10}O{sub 3} samples, respectively. Agglomerated nanocubes could be clearly observed in all as-prepared and annealed Co-doped samples by scanning electron microscope (SEM) and transmission electron microscope (TEM). X-ray absorption near edge spectroscopy (XANES) results suggested the presence of Co{sup 2+} cations in as-prepared Co-doped SrTiO{sub 3} samples, while both of Co{sup 2+} and Co{sup 3+} cations were found in annealed Co-doped SrTiO{sub 3} samples. The cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) results of as-prepared and annealed SrTi{sub 1-x}Co{sub x}O{sub 3} (x = 0.05, 0.075 and 0.10) electrodes revealed pseudocapacitor behavior of the Faradaic redox reaction type. The specific capacitance (Csc) was affected by the increase of Co content in all as-prepared and annealed Co-doped SrTiO{sub 3} samples with an excellent cycling stability after 200 cycle test of 97.24% and the highest value of 75.28 F g{sup −1} at 1 A g{sup −1} in an annealed SrTi{sub 0.925}Co{sub 0.075}O{sub 3} electrode. Magnetization measurements at room temperature using vibrating sample magnetometer (VSM) revealed diamagnetic behavior of as-prepared SrTiO{sub 3} sample, whereas paramagnetic behavior was observed in all as-prepared Co-doped SrTiO{sub 3} samples. After annealing, undoped sample exhibited paramagnetic behavior, whereas ferromagnetic behavior was observed in all Co-doped SrTiO{sub 3} samples with the increase of saturation magnetization (M{sub s}) at 10 kOe from 0.58 to 1.63 emu/g and the coercive field (H{sub c}) from 43.71 to 123.87 Oe, suggested to originate from the face-center exchange (FCE) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Keratin-derived functional carbon with superior charge storage and transport for high-performance supercapacitors

In this work, we report a scalable method to synthesize hierarchically porous, hetero-atom doped activated carbon nanosheet from waste biomass-human hair, and demonstrates the use of this carbon as an ultra-high performance electrode material for supercapacitor applications. Microscopic analyses reveal that sheet size ranges from 50 to 200 nm having a thickness of 15–27 nm. As-synthesized, carbon nanosheets possess a hierarchical porous structure having a specific surface area of 1548 m 2 g -1 . Heteroatom concentration (nitrogen, oxygen, and sulfur) of around 25% is confirmed from XPS analysis. Therefore, the novel interconnected hierarchical porous nanosheets structure enables fast adsorption and transportation of ions during electrochemical processes. Also, the abundant chemically available electroactive heteroatom species in the material enhance the wettability of ions and contribute to pseudocapacitance. The electrochemical analyses through cyclic voltammetry and galvanostatic charge-discharge measurements in 6 M KOH reveal the quasi-EDLC behavior of the activated carbons due to the presence of heteroatoms. A reprensentative KOH activated carbon shows an excellent specific capacitance value of 999 F g -1 at a current density of 1 A g -1 . Furthermore, the symmetrically assembled two-electrode device also delivers a maximum energy density of 32 W h Kg -1 at a power density of 325 W Kg -1 . In addition, excellent cyclic stability of 98% capacitance retention is observed after 10,000 continuous GCD cycles even at a high current density of 5 A g -1 . Symmetric flexible supercapacitor device using KOH-PVA-K3FeCN6 as redox gel polymer electrolyte shows a synergistic specific capacitance of 145 mF cm -1 at a current density of 0.8 mA cm -1 exhibiting very less deviation in bending mode. Therefore, this waste biomass derived heteroatom doped hierarchical porous carbon nanosheets can be a promising material for cost-effective high- performance supercapacitor.

42 ENGINEERING↗

Investigation of super-capacitive nature of reduced graphene oxide nano mesh grown over 18 k gold foil using wings of Parides iphidamas as biological template

Highlights: • Novel rGO nano mesh (rGONM) like assembly was fabricated using bio-template method. • rGONM pattern exhibit nano-ridges (40 nm) and ribs (25 nm) resembling fishing net. • Super-capacitor performances of rGO and rGONM coated Au substrates were evaluated. • rGO-Au and rGONM-Au revealed specific capacitances of 291 and 418 F/g respectively. - Abstract: This paper deals with the fabrication of novel, reduced graphene oxide nano mesh (rGONM) patterns with longitudinal nano-ridges and transverse nano-ribs using nano tubular structures found on the scales of Parides iphidamas, a butterfly species as biological template. Raman spectra, EDAX and FTIR results confirm the obtained mesh-like morphology that comprises only reduced graphene oxide (rGO). Further, super-capacitor performances of rGO and rGONM-coated gold substrates have been evaluated using cyclic-voltammetry (CV), galvanostatic charge-discharge cycle (GCD) and electrochemical impedance spectroscopic (EIS) analysis. A characteristic rectangular curve obtained from the CV of rGO and rGONM-coated gold electrodes display specific capacitances of 291 F/g and 418 F/g respectively at a scan rate of 5 mV/s. The results obtained from EIS support the superior nature of rGONM-coated electrode against rGO system, suggesting the use of rGONM-Au as a potential candidate for electrochemical super capacitor applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphological behaviour, electronic bond formation and electrochemical performance study of V2O5-polyaniline composite and its application in asymmetric supercapacitor

Highlights: • Interlinked V{sub 2}O{sub 5}-PANI composites are synthesized by chemical polymerization. • V{sub 2}O{sub 5}-PANI exhibits the highest capacitance of 529.56 F g{sup −1} with wide window of 1.6 V. • Correlation between electrochemical performances with IR peak shifts is studied. • Inorganic-organic synergistic effect plays crucial role for wide working window. • Asymmetric supercapacitor exhibits high energy and power in wide potential windows. - Abstract: To meet the demand of high-energy density supercapacitors, development of suitable electrode material with a wide potential window and high specific capacitance is most important. In this report, we have synthesized V{sub 2}O{sub 5}-PANI nanocomposite through in-situ intercalation and polymerization reaction of aniline with V{sub 2}O{sub 5}, which shows a wide potential window as well as high specific capacitance. XRD, SEM and FTIR have been used to characterize the electrode materials. Their electrochemical activity and pseudocapacitive performances were investigated. The correlation between morphology and electrochemical performances were investigated which is a vital way for the selection of electrode materials. Due to the organic-inorganic compatibility, V{sub 2}O{sub 5}-PANI exhibits good electrochemical charge storage in a wide potential window of 1.6 V (ranging between −0.4 V to 1.2 V) with excellent stability of 84.2% capacitance retention after 5000 GCD cycles. Moreover, asymmetric supercapacitor was assembled V{sub 2}O{sub 5}-PANI composite and NiMn{sub 2}O{sub 4} electrodes which yield remarkable energy and power density.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In-Situ Ligand-Induced Chirality Transfer in Emissive CdSe Nanoplatelets

Terminating semiconductor nanocrystals with chiral organic ligands can induce chiroptical properties that combine the chiral character of the ligands with the strong and tunable optical properties of the nanocrystal. However, the synthesis of such chiral-modified nanocrystals is currently limited by solvent incompatibility between polar chiral ligands and nonpolar traditional ligands, as well as by ligand dissolution behavior that ultimately compromises nanocrystal quality and the degree to which chiroptical properties can be manipulated. In this work, we demonstrate a single-step synthesis of chiral cadmium selenide (CdSe) nanoplatelets (NPLs) that eliminates the need for postsynthetic ligand exchange in aqueous solvents, resulting in highly emissive chiral CdSe NPLs. By directly incorporating chiral aminodecanoic acid ligands during synthesis, we achieve in situ ligand binding and chirality transfer to CdSe NPLs. This approach produces CdSe NPLs with high photoluminescence quantum efficiencies of 50% and circular dichroism dissymmetry factors (gCD) on the order of 10 –4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoluminescence (TL) Analysis and Fading Studies of Naturally Occurring Salt Irradiated by 500 mGy Gamma Rays

The aim of the present study was to investigate the potential of the naturally occurring salt for the dosimetry purposes, using TL. The fine powder samples (20 mg) were irradiated by {gamma}- rays from 500 mGy to 2500 mGy by using Theratron-780C Cobalt-60 source, however, this paper discusses about 500 mGy only. The TL glow curve peak parameters were studied by using Chen's peak shape equation. TL glow curves were compared with fitted curves using glow curve deconvolution (GCD) method by using Kitis expression. The kinetic parameter values (E, b and s) so calculated, are in good agreement with those available in literature. The calculated energy values were also verified by using various heating rate (VHR) method. {chi}{sup 2} test and figure of merit (FOM) calculation was done to accept the goodness of fit between the curves. Fading studies of the sample showed a good fitting between the curves. The analysis suggests that natural salt should be considered for dosimetry purposes.

36 MATERIALS SCIENCE↗

Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches

Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N{sub 2} environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO{sub 2} surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N{sub 2} adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells’ performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanofiber of Mn{sub 3}O{sub 4}: Fabrication and application as supercapacitor electrode

Mn{sub 3}O{sub 4}–nanofiber with high aspect ratio is prepared by a simple electrospinning process. The thermal, structural and morphological characterizations are carried out by TGA, XRD and FESEM, respectively. To assess the property of nanofiber for the use in supercapacitors, cyclic voltammetry (CV) and galvanostatic charging-discharging (GCD) are performed in 2M KOH electrolyte with the potential window ranging from +0.42V to −0.45V. Effect of polymer concentration and electric field intensity on the diameter of as-spun nanofiber was studied. Further, appropriate heating rate was used for sintering to obtain aligned nanofiber. High specific capacitance of 150(±5) F g{sup −1} is obtained by Mn{sub 3}O{sub 4} nanofibers. The rate performance is also found to be good. This improved performance in terms of high specific capacitance and rate capability is ascribed to the nanofabric morphology which provides more active sites and easy access path for ions/electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrodeposition of Fe{sub 2}O{sub 3} nanoparticles and its supercapacitive properties

Fe{sub 2}O{sub 3} metal oxide nanoparticles are synthesized by electrodeposition method on stainless steel substrate. The crystal structure and surface morphological studies of the obtained metal oxide thin film are carried out by using X-ray diffraction (XRD) technique and Scanning Electron Microscopy (SEM) respectively. The electrochemical properties of Fe{sub 2}O{sub 3} thin film like Cyclic Voltammetry (CV), Galvonostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS) are studied in a bath of 0.5 M Na{sub 2}SO{sub 4} as electrolyte. The observed specific capacitance shows improved values 135 Fg{sup −1} at 5 mVs{sup −1} scan rate. The electrochemical stability of Fe{sub 2}O{sub 3} electrode is investigated using cyclic voltammetry for 1000 cycles at a scan rate 50 mVs{sup −1}. The Fe{sub 2}O{sub 3} electrode exhibits superior cycling stability with only 4-5% capacitance loss after one thousand cycles. The values of specific power and specific energy of Fe{sub 2}O{sub 3} electrode obtained from Galvonostatic charge discharge studies are 2250 W.kg{sup −1} and 63.15 Wh.kg{sup −1} respectively at current density 1 A/g. From all the electrochemical properties of Fe{sub 2}O{sub 3} electrode, it indicates that it will be promising electrode material for supercapacitor application.

36 MATERIALS SCIENCE↗

SPONTANEOUS INITIATION OF DETONATIONS IN WHITE DWARF ENVIRONMENTS: DETERMINATION OF CRITICAL SIZES

Some explosion models for Type Ia supernovae (SNe Ia), such as the gravitationally confined detonation (GCD) or the double detonation sub-Chandrasekhar (DDSC) models, rely on the spontaneous initiation of a detonation in the degenerate {sup 12}C/{sup 16}O material of a white dwarf (WD). The length scales pertinent to the initiation of the detonation are notoriously unresolved in multidimensional stellar simulations, prompting the use of results of one-dimensional simulations at higher resolution, such as those performed for this work, as guidelines for deciding whether or not conditions reached in the higher dimensional full star simulations successfully would lead to the onset of a detonation. Spontaneous initiation relies on the existence of a suitable gradient in self-ignition (induction) times of the fuel, which we set up with a spatially localized nonuniformity of temperature-a hot spot. We determine the critical (smallest) sizes of such hot spots that still marginally result in a detonation in WD matter by integrating the reactive Euler equations with the hydrodynamics code FLASH. We quantify the dependences of the critical sizes of such hot spots on composition, background temperature, peak temperature, geometry, and functional form of the temperature disturbance, many of which were hitherto largely unexplored in the literature. We discuss the implications of our results in the context of modeling of SNe Ia.

79 ASTRONOMY AND ASTROPHYSICS↗

Using HT and DT gamma rays to diagnose mix in Omega capsule implosions

Experimental evidence [1] indicates that shell material can be driven into the core of Omega capsule implosions on the same time scale as the initial convergent shock. It has been hypothesized that shock-generated temperatures at the fuel/shell interface in thin exploding pusher capsules diffusively drives shell material into the gas core between the time of shock passage and bang time. Here, we propose a method to temporally resolve and observe the evolution of shell material into the capsule core as a function of fuel/shell interface temperature (which can be varied by varying the capsule shell thickness). Our proposed method uses a CD plastic capsule filled with 50/50 HT gas and diagnosed using gas Cherenkov detection (GCD) to temporally resolve both the HT "clean" and DT "mix" gamma ray burn histories. Simulations using Hydra [2] for an Omega CD-lined capsule with a sub-micron layer of the inside surface of the shell pre-mixed into a fraction of the gas region produce gamma reaction history profiles that are sensitive to the depth to which this material is mixed. Furthermore, we observe these differences as a function of capsule shell thickness is proposed to determine if interface mixing is consistent with thermal diffusion λ ii ~T 2 /Z 2 ρ at the gas/shell interface. Finally, since hydrodynamic mixing from shell perturbations, such as the mounting stalk and glue, could complicate these types of capsule-averaged temporal measurements, simulations including their effects also have been performed showing minimal perturbation of the hot spot geometry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fractons with twisted boundary conditions and their symmetries

In this work, we study several exotic systems, including the X-cube model, on a flat three-torus with a twist in the $xy$-plane. The ground state degeneracy turns out to be a sensitive function of various geometrical parameters. Starting from a lattice, depending on how we take the continuum limit, we find different values of the ground state degeneracy. Yet, there is a natural continuum limit with a well-defined (though infinite) value of that degeneracy. We also uncover a surprising global symmetry in $2+1$ and $3+1$ dimensional systems. It originates from the underlying subsystem symmetry, but the way it is realized depends on the twist. In particular, in a preferred coordinate frame, the modular parameter of the twisted two-torus $\tau = \tau_1 + i \tau_2$ has rational $\tau_1 = k / m$. Then, in systems based on $U(1)\times U(1)$ subsystem symmetries, such as momentum and winding symmetries or electric and magnetic symmetries, the new symmetry is a projectively realized $\mathbb{Z}_m\times \mathbb{Z}_m$, which leads to an $m$-fold ground state degeneracy. In systems based on $\mathbb{Z}_N$ symmetries, like the X-cube model, each of these two $\mathbb{Z}_m$ factors is replaced by $\mathbb{Z}_{\gcd(N,m)}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Establish the basis for Breadth-First Search on Frontier System: XBFS on AMD GPUs

Graphics Processing Units (GPUs) offer significant potential for accelerating various computational tasks, including Breadth-First Search (BFS). Numerous efforts have been made to deploy BFS on GPUs effectively. To address the dynamic nature of BFS, XBFS, the state-of-the-art work, employs an adaptive strategy that leverages different optimized frontier queue generation designs, accommodating the varying characteristics of levels in BFS. While XBFS demonstrates excellent performance on NVIDIA Quadro P6000 GPUs, it faces challenges when deployed on AMD GPUs. In this work, we present our efforts to implement XBFS’s adaptive approach on Frontier, the most powerful supercomputer system, by porting XBFS to AMD MI250X GPUs. Through targeted optimizations tailored to the unique features of AMD GPUs, our implementation achieves an average performance of 43 Giga-Traversed Edges Per Second (GTEPS) per Graphics Compute Dies (GCD). Based on these results, we observe potential for surpassing the performance of the official Frontier results from the Graph500 benchmark released in June 2024.

Yang, Haoshen↗

Scheduled Sequential Compressed Spectrum Sensing for Wideband Cognitive Radios

The support for high data rate applications with the cognitive radio technology necessitates wideband spectrum sensing. However, it is costly to apply long-term wideband sensing and is especially difficult in the presence of uncertainty, such as high noise, interference, outliers, and channel fading. In this paper, we propose scheduling of sequential compressed spectrum sensing which jointly exploits compressed sensing (CS) and sequential periodic detection techniques to achieve more accurate and timely wideband sensing. Instead of invoking CS to reconstruct the signal in each period, our proposed scheme performs backward grouped-compressed-data sequential probability ratio test (backward GCD-SPRT) using compressed data samples in sequential detection, while CS recovery is only pursued when needed. This method on one hand significantly reduces the CS recovery overhead, and on the other takes advantage of sequential detection to improve the sensing quality. Furthermore, we propose (a) an in-depth sensing scheme to accelerate sensing decision-making when a change in channel status is suspected, (b) a block-sparse CS reconstruction algorithm to exploit the block sparsity properties of wide spectrum, and (c) a set of schemes to fuse results from the recovered spectrum signals to further improve the overall sensing accuracy. Finally, extensive performance evaluation results show that our proposed schemes can significantly outperform peer schemes under sufficiently low SNR settings.

42 ENGINEERING↗

Evapotranspiration Cover for the 92-Acre Area Retired Mixed Waste Pits: Interim CQA Report

This Interim Construction Quality Assurance (CQA) Report is for the 92-Acre Evapotranspiration Cover, Area 5 Waste Management Division (WMD) Retired Mixed Waste Pits, Nevada National Security Site, Nevada for the period of January 20, 2011 to May 12, 2011. This Interim Construction Quality Assurance (CQA) Report is for the 92-Acre Evapotranspiration Cover, Area 5 Waste Management Division (WMD) Retired Mixed Waste Pits, Nevada National Security Site, Nevada for the period of January 20, 2011 to May 12, 2011. Construction was approved by the Nevada Division of Environmental Protection (NDEP) under the Approval of Corrective Action Decision Document/Corrective Action Plan (CADD/CAP) for Corrective Action Unit (CAU) 111: Area 5 WMD Retired Mixed Waste Pits, Nevada National Security Site, Nevada, on January 6, 2011, pursuant to Subpart XII.8a of the Federal Facility Agreement and Consent Order. The project is located in Area 5 of the Radioactive Waste Management Complex (RWMC) at the Nevada National Security Site (NNSS), formerly known as the Nevada Test Site, located in southern Nevada, approximately 65 miles northwest of Las Vegas, Nevada, in Nye County. The project site, in Area 5, is located in a topographically closed basin approximately 14 additional miles north of Mercury Nevada, in the north-central part of Frenchman Flat. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste. The 92-Acre Area encompasses the southern portion of the Area 5 RWMS, which has been designated for the first final closure operations. This area contains 13 Greater Confinement Disposal (GCD) boreholes, 16 narrow trenches, and 9 broader pits. With the exception of two active pits (P03 and P06), all trenches and pits in the 92-Acre Area had operational covers approximately 2.4 meters thick, at a minimum, in most areas when this project began. The units within the 92-Acre Area are grouped into the following six informal categories based on physical location, waste types and regulatory requirements: (1) Pit 3 Mixed Waste Disposal Unit (MWDU); (2) Corrective Action Unit (CAU) 111; (3) CAU 207; (4) Low-level waste disposal units; (5) Asbestiform low-level waste disposal units; and (6) One transuranic (TRU) waste trench.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗