Search NASA⌕ Search

SEARCH · Search NASA

Results for “GPU Graphical Processing Units”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Gravitational waves from asymmetric oscillon dynamics?

It has been recently suggested that oscillons produced in the early universe from certain asymmetric potentials continue to emit gravitational waves for a number of e-folds of expansion after their formation, leading to potentially detectable gravitational wave signals. We revisit this claim by conducting a convergence study using graphics processing unit (GPU)-accelerated lattice simulations and show that numerical errors accumulated with time are significant in low-resolution scenarios, or in scenarios where the run-time causes the resolution to drop below the relevant scales in the problem. Our study determines that the dominant, growing high frequency peak of the gravitational wave signals in the fiducial "hill-top model" in [arXiv:1607.01314] is a numerical artifact. This new finding prompts the need for a more careful analysis of the numerical validity of other similar results related to gravitational waves from oscillon dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Accelerating parameter inference with graphics processing units

Gravitational wave Bayesian parameter inference involves repeated comparisons of GW data to generic candidate predictions. Even with algorithmically efficient methods like RIFT or reduced-order quadrature, the time needed to perform these calculations and overall computational cost can be significant compared to the minutes to hours needed to achieve the goals of low-latency multimessenger astronomy. By translating some elements of the RIFT algorithm to operate on graphics processing units (GPU), we demonstrate substantial performance improvements, enabling dramatically reduced overall cost and latency.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Machine Learning Models for Network Traffic Classification in Programmable Logic

Network traffic classification via machine learning on network packet payloads has emerged as an active area of research for network security due to the high accuracy machine learning models have achieved in classifying payloads. For effective deployment as part of network security, these machine learning models must not only classify malicious packet payloads accurately, they must also identify anomalous payloads and perform inference at speeds generally faster than 10,000 packets per second to be effective. This work explores the in- ference speeds and accuracy of several neural network models implemented in programmable logic on various field programmable gate arrays (FPGA) including the Xilinx VC1902 and Xilinx Zynq Ultrascale+. This work also presents the design and performance of both an autoencoder and variational autoencoder programmed on the FPGA for identifying anomalous packet payloads. The performance benefits of the FPGA implementation for this type of packet payload inspection driven by machine learning are compared against graphics processing unit (GPU) inference implementations run on two state-of-the-art datacenter GPU devices, the NVIDIA V100 and A100. The model accuracy difference between the FPGA and GPU implementations was found to be 4% or less while the Xilinx VC1902 outperformed both the NVIDIA V100 and A100 for inference speeds on all the models explored except the variational autoencoder.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Towards Efficient Alternating Current Optimal Power Flow Analysis on Graphical Processing Units

We present a solution of sparse ACOPF analysis on GPU. In particular, we discuss the performance bottlenecks and detail our efforts to accelerate the linear solver, a core component of ACOPF that dominates the computational time. ACOPF solutions of two large-scale systems, synthetic Northeast (25,000 buses) and Eastern (70,000 buses) \cite{birchfield2017tamu-cases} on GPU show promising speed-up compared to CPU based solution using a state-of-the-art solver. To our knowledge, this is the first result demonstrating acceleration of sparse ACOPF on GPUs.

Power grid analysis, GPU↗
DOE OSTI2023

A 5G Enabled Adaptive Computing Workflow for Greener Power Grid

5G wireless technology can deliver higher data speeds, ultra low latency, more reliability, massive network capacity, increased availability, and a more uniform user experience to users. It brings additional power to help address the challenges brought by renewable integration and decarbonization. In this paper, a 5G enabled adaptive computing workflow tool has been presented that consists of various computing resources, such as 5G equipment, edge computing, cluster, Graphics processing unit (GPU) and cloud computing, with two examples showing technical feasibility for edge-grid-cloud interaction for real-time monitoring, security assessment, and forecasting. Benefiting from the high data transmission speed and massive connection capability of 5G, the workflow shows its potential to seamlessly integrate various applications at distributed and/or centralized locations to build more complex and powerful functions, with better flexibility.

5G technology, computational workflow, edge comput↗
DOE OSTI2022

Scalable Deep Learning-Based Microarchitecture Simulation on GPUs

Cycle-accurate microarchitecture simulators are essential tools for designers to architect, estimate, optimize, and manufacture new processors that meet specific design expectations. However, conventional simulators based on discrete-event methods often require an exceedingly long time-to-solution for the simulation of applications and architectures at full complexity and scale. Given the excitement around wielding the machine learning (ML) hammer to tackle various architecture problems, there have been attempts to employ ML to perform architecture simulations, such as Ithemal and SimNet. However, the direct application of existing ML approaches to architecture simulation may be even slower due to overwhelming memory traffic and stringent sequential computation logic. This work proposes the first graphics processing unit (GPU)-based microarchitecture simulator that fully unleashes the potential of GPUs to accelerate state-of-the-art ML-based simulators. First, considering the application traces are loaded from central processing unit (CPU) to GPU for simulation, we introduce various designs to reduce the data movement cost between CPUs and GPUs. Second, we propose a parallel simulation paradigm that partitions the application trace into sub-traces to simulate them in parallel with rigorous error analysis and effective error correction mechanisms. Combined, this scalable GPU-based simulator outperforms by orders of magnitude the traditional CPU-based simulators and the state-of-the-art ML-based simulators, i.e., SimNet and Ithemal.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Propagation Pattern for Moment Representation of the Lattice Boltzmann Method

A propagation pattern for the moment representation of the regularized lattice Boltzmann method (LBM) in three dimensions is presented. Using effectively lossless compression, the simulation state is stored as a set of moments of the lattice Boltzmann distribution function, instead of the distribution function itself. An efficient cache-aware propagation pattern for this moment representation has the effect of substantially reducing both the storage and memory bandwidth required for LBM simulations. This article extends recent work with the moment representation by expanding the performance analysis on central processing unit (CPU) architectures, considering how boundary conditions are implemented, and demonstrating the effectiveness of the moment representation on a graphics processing unit (GPU) architecture.

42 ENGINEERING↗
DOE OSTI2018

Steady-State Calibration of a Diesel Engine in Computational Fluid Dynamics Using a Graphical Processing Unit-Based Chemistry Solver

The prospect of analysis-driven precalibration of a modern diesel engine is extremely valuable in order to significantly reduce hardware investments and accelerate engine designs compliant with stricter fuel economy regulations. Advanced modeling tools, such as CFD, are often used with the goal of streamlining significant portions of the calibration process. The success of the methodology largely relies on the accuracy of analytical predictions, especially engine-out emissions. However, the effectiveness of CFD simulation tools for in-cylinder engine combustion is often compromised by the complexity, accuracy, and computational overhead of detailed chemical kinetics necessary for combustion calculations. The standard approach has been to use skeletal kinetic mechanisms (~50 species), which consume acceptable computational time but with degraded accuracy. In this work, a comprehensive demonstration and validation of the analytical precalibration process is presented for a passenger car diesel engine using CFD simulations and a graphical processing unit (GPU)-based chemical kinetics solver (Zero-RK, developed at Lawrence Livermore National Laboratory, Livermore, CA) on high performance computing resources to enable the use of detailed kinetic mechanisms. Diesel engine combustion computations have been conducted over 600 operating points spanning in-vehicle speed-load map, using massively parallel ensemble simulation sets on the Titan supercomputer located at the Oak Ridge Leadership Computing Facility. The results with different mesh resolutions have been analyzed to compare differences in combustion and emissions (NOx, carbon monoxide CO, unburned hydrocarbons (UHC), and smoke) with actual engine measurements. The results show improved agreement in combustion and NOx predictions with a large n-heptane mechanism consisting of 144 species and 900 reactions with refined mesh resolution; however, agreement in CO, UHC, and smoke remains a challenge.

42 ENGINEERING↗
DOE OSTI2018

Prediction of residual stresses in a multipass pipe weld by a novel 3D finite element approach

Due to enormous computation cost, current residual stress simulation of multipass girth welds are mostly performed using two-dimensional (2D) axisymmetric models. The 2D model can only provide limited estimation on the residual stresses by assuming its axisymmetric distribution. In this study, a highly efficient thermal-mechanical finite element code for three-dimensional (3D) model has been developed based on high performance Graphics Processing Unit (GPU) computers. Our code is further accelerated by considering the unique physics associated with welding processes that are characterized by steep temperature gradient and a moving arc heat source. It is capable of modeling large-scale welding problems that cannot be easily handled by the existing commercial simulation tools. To demonstrate the accuracy and efficiency, our code was compared with a commercial software by simulating a 3D multi-pass girth weld model with over 1 million elements. Our code achieved comparable solution accuracy with respect to the commercial one but with over 100 times saving on computational cost. Moreover, the three-dimensional analysis demonstrated more realistic stress distribution that is not axisymmetric in hoop direction.

Huang, Hui↗
DOE OSTI2023

Physical vapor deposition simulator by graphical processor unit ray casting

This paper presents fast, accurate software for modeling physical vapor deposition systems over irregular surfaces. The model is implemented using graphics processing unit (GPU) ray casting. Applied models are viewed as a cross section of the area of interest. Given evaporation rate, time, and angular profiles in a vacuum system, an iterative time-step approach for calculating deposition profiles is calculated in the GPU architecture following a ballistic modeling approach. Thin-film technologies for the electronics industry will require evaporations on complex surfaces. Depending on the nature of the surface, a uniform thin film across the topology is wanted for various device parameters. The ray casting method is tested against various profiles. The code is freely distributed on GitHub (see https://github.com/adam-r-thomas/PVDS).

Engineering↗
DOE OSTI2019

Simulation of Magnetic Systems in the Domain with a Corner

Numerical simulation of magnetic systems having corner points is considered. The literature on this topic is reviewed. A method of encapsulating the function behavior near corner points in the difference scheme is proposed for numerical solution of the 2D magnetostatic problem in the iron domain. For the 3D magnetostatic problem in the iron/vacuum domain, the increase in the magnetic field near the corner point is estimated, and a method for construction of an adaptive mesh is proposed. A parallel algorithm is implemented on the graphics-processing unit (GPU) architecture for faster search for the numerical solution of the magnetostatic problem. Numerical simulation is performed for the magnetic system of the SPD detector to be used at the NICA complex (JINR, Dubna).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

VTK-m: Visualization for the Exascale Era and Beyond

A recent trend in modern high-performance computing is the increasing use of hybrid architectures, where the vast majority of performance comes from accelerators. Modern accelerators are based on Graphics Processing Units (GPU) that contain many low power cores that in their aggregate provides an extremely high computation rate. Current and future CPU processors are requiring more explicit parallelism as each successive version of the hardware packs in more cores, and technologies like hyperthreading and vector operations require even more parallel processing to leverage each core’s full potential. As an example, the Frontier supercomputer installed at Oak Ridge National Laboratories recently hit a record breaking 1.1 exaflops1 on the LINPACK HPC benchmark [Shoemaker 2022]. The system contains 37632 AMD MI250x GPUs which requires more than half a billion threads to keep the system fully utilized [Khizeran 2022].VTK-m is a toolkit of scientific visualization algorithms for these emerging processor architectures. VTK-m supports the fine-grained concurrency for data analysis and visualization algorithms required to drive extreme scale computing by providing abstract models for data and execution that can be applied to a variety of algorithms across many different processor architectures.

Bolstad, Mark↗
DOE OSTI2024

High Performance Computing Peak Shaving for Microreactor Operation

There are multiple nuclear microreactors currently under development that are designed to provide autonomous power for as many as ten or more years without refueling and are designed to power high performance computing (HPC) datacenters. But the load-follow speeds for a nuclear microreactor will be much slower than grid power and slower than the power variance typical of a HPC system. HPC datacenters experience peak power load variance driven by several factors ranging from the operation of cooling systems to remove heat from the servers to supporting a wide range of user application workflows and architectures each with different power signatures. One mechanism to support the limited load-follow of a microreactor is peak shaving where an energy storage mechanism is used to shed peak load and reduce significant power variance. This work explores peak electrical load shaving using uninterruptible power supply (UPS) systems designed for HPC support in the context of peak shaving when operating using a nuclear microreactor with a load-follow limited to 10% of load per minute. Using a self contained HPC datacenter complete with stand-alone cooling system and provisioned with an x86 cluster, an ARM cluster, and a graphics processing unit (GPU) cluster, peak shaving for microreactor operation using the UPS battery backup is explored while running two classes of typical HPC user applications. HPC architecture suitability for microreactor operation under this type of peak shaving is examined.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

HiPACE++ v0.1

Hipace++ is the new implementation of the DESY-LBNL code Hipace (not distributed nor licensed) for plasma acceleration, relying on the quasi-static particle-in-cell (PIC) method, enabling fast and accurate simulations of plasma accelerators for problems satisfying the quasi-static approximation. Plasma acceleration is a priority in the ATAP division, and such problems represent a wide range of parameters. Hipace++ is an HPC (high-performance computing) code running on supercomputers and it provides the first efficient implementation of the quasi-static PIC method on Graphic Processing Units (GPU), showing 10x speedup and using much less resources than CPU implementations for production simulations. It currently runs on Nvidia GPUs and will ultimately be portable to more accelerated HPC platforms. The porting strategy is novel, and can be adapted to other flavors of quasi-static PIC. Besides, Hipace++ aims at using mesh refinement for higher efficiency, thus enabling simulations unfeasible today. For this purpose, Hipace++ depends on the open-source library AMReX (Adaptive Mesh Refinement at EXascale) developed at LBNL.

Vay, Jean-Luc↗
DOE OSTI2022

mesoflow [SWR-22-56]

Mesoflow is a continuum scale simulation tool developed specifically for modeling transport and chemistry at the mesoscale. Our solver utilizes Cartesian block-structured adaptive mesh refinement to resolve complex surface morphologies (of catalysts/biomass particles among others) directly obtained from X-ray tomography data. An immersed boundary based formulation enables rapid representation of complex geometries prevalent in most mesoporous interfaces. The solver is developed on top of open-source performance portable library, AMReX, providing parallel execution capabilities on current and upcoming high-performance-computing (HPC) architectures. Our flexible software framework enables integration of complex chemical mechanisms at heterogenous interfaces and time-split algorithms for circumventing highly disparate reaction and flow time-scales. Our current studies indicate a ten-fold performance gain by using graphics-processing-units (GPU) compared to a single processor for representative problem sizes (2 million cell mesh).

Sitaraman, Hariswaran↗
DOE OSTI2022

Inference-Engine v0.1.0

Given a pre-trained neural network, Inference-Engine performs maps network inputs to outputs by executing the forward pass through the provided network. Although the predominant programming language for machine-learning is Python, most high-performance computing (HPC) applications are written in Fortran, C, or C++. Inference-Engine aims to support HPC programs and is written in Fortran, a language with a large feature set supporting interoperability with C. This software exposes concurrency in a portable way by using standard language features that some modern Fortran compilers can exploit with various optimizations, including offloading computation to a Graphics Processing Unit (GPU). In particular, this software makes extensive use of Fortran's "do concurrent" parallel loop construct, implicitly parallel array statements, and pure procedures that can be invoked inside "do concurrent" blocks. Inference-Engine also supports dynamic choice of inference methods at runtime. Two current options include one method that uses Fortran's "dot_product" intrinsic function inside "do concurrent" blocks and another method that instead uses Fortran' "matmul" array intrinsic function. We plan to investigate automatic compiler offloading of "do concurrent" calculations to GPUs and compile-time substitution of optimized libraries such as the Basic Linear Algebra Library (BLAS) for "matmul" invocations. We also envision the potential for the choice of which method to use could happen at program launch based on in situ performance measurements on any given platform.

Rouson, Damian↗
DOE OSTI2021

Caffeine v0.1.0

Caffeine is the CoArray Fortran Framework of Efficient Interfaces to Network Environments. Caffeine aims to produce a parallel runtime library that will support Fortran compilers with a programming-model-agnostic application binary interface (ABI) to various lower-level communication libraries. The current version of Caffeine uses the GASNet-EX networking middleware, also developed at Berkeley Lab. On many combinations of applications and platforms, GASNet-EX outperforms the widely used Message Passing Interface (MPI). Through GASNet-EX's support for communicating between graphics processing units (GPU), GASNet-EX has features that specifically target the emerging, leading-edge exascale computing platforms.

Rouson, Damian↗
DOE OSTI2025

SPADES (Scalable Parallel Discrete Events Simulation) [SWR-24-99]

SPADES (Solver for PArallel Discrete Event Simulation) is an open-source parallel discrete event simulation (PDES) package built on the AMReX library. Targeted at solving discrete event systems in parallel, this software package aims to be performance portable and scalable on heterogeneous computing architectures, e.g., graphic processing units (GPU). SPADES implements optimistic synchronization with rollback through an implementation of the Time Warp algorithm. An alternative conservative synchronization approach is also implemented using the Lower Bound on Incoming Time Stamp. In our implementation, logical processes are represented as cells in a grid and event messages are represented as particles. SPADES supports various parallel decomposition strategies, including the use of the Message Passing Interface (MPI) and OpenMP threading. All major GPU architectures (e.g., Intel, AMD, NVIDIA) are supported through the use of performance portability functionalities implemented in AMReX. The SPADES software is released in NREL Software Record SWR-24-99 “SPADES (Scalable Parallel Discrete Events Simulation)”.

Henry de Frahan, Marc [National Renewable Energy L↗