Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gas sorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Iodine Sorption on AgZ-PAN

The Department of Energy (DOE) Nuclear Fuel Cycle and Supply Chain Program Material Recovery and Waste Form Development (MRWFD) Campaign Off-gas Sigma Team has performed research and development on iodine control and iodine waste forms for the past several years. This research and development has included iodine adsorption tests using a laboratory-scale test system containing multiple-segmented fixed beds of iodine adsorbents. Iodine capture performance has been tested using (a) non-radioactive synthetic gas mixtures blended from air, nitrogen, NO, NO 2 , water, to simulate dissolver off-gas (DOG) and vessel off-gas (VOG) streams from used nuclear fuel aqueous reprocessing, (b) inorganic and organic iodine species, and (c) different sorbents. An initial test of silver-functionalized mordenite in polyacrylonitrile matrix (AgZ-PAN) was conducted to assess if this sorbent, initially designed for selective sorption of Xe that evolves into used fuel reprocessing off-gas streams, could also be a candidate for iodine sorption. This test was conducted using the same deep-bed test system and methodologies used in many prior iodine sorption tests using other sorbents. Diatomic iodine (I2) was used as the target iodide in a gas stream containing air, NO, NO 2 , and moisture designed to simulate an aqueous reprocessing dissolver off-gas (DOG) stream.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Effects of Pore Connectivity on the Sorption of Fluids in Nanoporous Material: Ethane and CO2 Sorption in Silicalite

Adsorption of fluids in nanoporous materials is important for several applications including gas storage and catalysis. The pore network in natural, as well as engineered, materials can exhibit different degrees of connectivity between pores. While this might have important implications for the sorption of fluids, the effects of pore connectivity are seldom addressed in the studies of fluid sorption. We have carried out Monte Carlo simulations of the sorption of ethane and CO2 in silicalite, a nanoporous material characterized by sub-nanometer pores of different geometries (straight and zigzag channel like pores), with varied degrees of pore connectivity. The variation in pore connectivity is achieved by selectively blocking some pores by loading them with methane molecules that are treated as a part of the rigid nanoporous matrix in the simulations. Normalized to the pore space available for adsorption, the magnitude of sorption increases with a decrease in pore connectivity. The increased adsorption in the systems where pore connections are removed by blocking them is because of additional, albeit weaker, adsorption sites provided by the blocker molecules. By selectively blocking all straight or zigzag channels, we find differences in the absorption behavior of guest molecules in these channels.

Gautam, Siddharth (ORCID:0000000314435382)↗
DOE OSTI2021

Pure- and mixed-gas transport properties of a microporous Tröger's Base polymer (PIM-EA-TB)

Polymers of intrinsic microporosity (PIMs) offer tantalizing combinations of high selectivity and permeability in initial gas permeation measurements. Here, we report characterization of pure- and mixed-gas permeation properties of a thick (~80 μm) PIM consisting of Tröger's Base (TB) and Ethanoanthracene (EA) films. The effects of feed pressure and temperature on pure-gas permeabilities of CH 4 , N 2 , O 2 , H 2 , and CO 2 were investigated. The physical aging behavior of the thick film was tracked via pure-gas O 2 , N 2 , and CH 4 permeability at 35 °C. Gas permeability decreased noticeably and selectivity increased as aging time increased. Particular attention was given to mixed-gas measurements of CO 2 and CH 4 (50/50) permeabilities at 35 °C and fugacities ranging from 2 to 18 atm to explore whether the rigid, bridged, bicyclic TB and EA units could resist CO 2 -induced plasticization. These results are presented along with pure-gas CO 2 and CH 4 results for membrane samples aged at different times. PIM-EA-TB aged for ~24 h did not show signs of plasticization across the fugacity range considered. Furthermore, dual-mode competitive sorption presumably caused the CO 2 /CH 4 mixed-gas selectivity to be slightly higher than its corresponding pure-gas selectivity. However, as aging time increased, aged films underwent progressively more rapid and extensive CO 2 -induced plasticization with increasing fugacity, suggesting a systematic relationship between physical aging and plasticization in PIMs. Consequently, physical aging caused less improvement in mixed-gas CO 2 /CH 4 selectivity than it did in pure-gas selectivity, due mainly to plasticization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sorbent-based oxygen separation with YBC114 for energy storage systems

In our report we aimed to design, build, and evaluate an oxygen separation system to provide an inert sweep gas with low oxygen partial pressure (pO2) to redox-active thermochemical energy conversion reactors for a range of applications, including two-step redox cycles for thermochemical energy storage, water splitting, and carbon-dioxide splitting. The separation is based on an oxygen-selective sorbent, YBaCo4O7+δ (YBC114), which has excellent oxygen sorption and desorption properties demonstrated in our previous work. The oxygen separation performance of YBC114 was comprehensively studied by thermogravimetric analysis, sorption breakthrough experiments, and temperature swing sorption - desorption cycles. The results reveal that YBC114 can produce inert sweep gas with an oxygen concentration of less than 100 ppmv for at least 20 min during the thermal swing adsorption (TSA) cycle with the current sorption bed configuration, and the performance is consistent from cycle to cycle. The optimal sorption and desorption temperatures for the TSA process with YBC114 are determined to be 300 °C and 500 °C, respectively. Although challenges remain for the current separation system (e.g., high sorption temperature and slow kinetics), this study demonstrates the potential to use the oxygen-selective sorbent to produce an inert sweep gas, the feasibility of the oxygen separation concept, and guides new sorbent material development to make this application economically practical. A simple procedure is described for designing the YBC114 oxygen separation process.

42 ENGINEERING↗
DOE OSTI2021

Characterization of shale using Helium and Argon at high pressures

In order to estimate the shale gas in place and the eventual recovery during shale gas operations, one of the key requirements is to accurately characterize the shale’s petrophysical and transport properties such as porosity, permeability, diffusivity, and storage capacity. Despite the many efforts reported in the technical literature aiming to provide an improved understanding of the complex pore structures and the associated fluid flow in gas shales, complete characterization of organic-rich shale samples still poses a big challenge. Here, we have characterized mass transfer and sorption in shale at different length scales using Helium (He) and Argon (Ar) as probe gases. Thermogravimetric analysis (TGA) with a shale cube of ~1 cm 3 in size and gas expansion experiments with a full-diameter core (3.5” in diameter) were used to measure sorption kinetics/isotherms and mass transfer, respectively. Both samples are from the same depth/location in the Marcellus shale formation. The TGA steady-state technique was initially used to generate excess sorption isotherms for Ar, while dynamic TGA experiments were used to study its sorption kinetics. The TGA experiments demonstrate that Ar, which has a similar sorption potential as Methane, but is generally assumed to be inert, adsorbs onto the surfaces of the mesoporous and microporous regions of the shale samples according to a Langmuir-type behavior. Helium expansion experiments, on the full-diameter core, were used to measure the overall porosity, on the basis that He is a non-sorbing and inert gas as compared to Ar. The He expansion experiments, furthermore, allow us to delineate the mass transfer of gas across the inherent hierarchy of pore sizes, including macropores (macro- and microcracks), mesopores and micropores. Similar expansion experiments were also performed with Ar to study the combined impact of mass transfer and sorption. A triple-porosity model (TPM) was utilized to interpret the He expansion experiments with the shale core and to extract (estimate) relevant transport parameters. We report and compare here the diffusivities and permeabilities of the whole core for both He and Ar, as calculated from the modeling and fitting of the experimental data. On the premise that the shale cube is representative of the matrix region of the core, the Ar sorption kinetics from the cube experiments were subsequently combined with the transport parameters extracted from the He experiments to predict the behavior of the Ar expansion test with the full-diameter core. An excellent agreement is observed between the model predictions and the experimental data. The experimental observations and their interpretation indicate that one must be cautious when using Ar to estimate the true porosity and permeability of shales. In addition, we demonstrate that He and Ar probe gases, when used in tandem, can be employed effectively as a tool to characterize shales in terms of mass transfer and sorption dynamics across scales.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2020

Sorption Enhanced Mixed Matrix Membranes for Hydrogen (H 2 ) Purification and Carbon Dioxide (CO 2 ) Capture

The technical objective of this project was to develop sorption enhanced mixed matrix membranes with H 2 permeance of 500 gas permeance units (GPU) and H 2 /CO 2 selectivity of 30 at 150-200 °C. These membranes will be the central component in the design of membrane based systems for 90% capture of CO 2 from coal-derived syngas, with 95% CO 2 purity at a cost of electricity 30% less than baseline capture approaches. The unique approach in this proposal is to design crosslinked polymers containing Pd-based nanoparticles achieving strong H 2 sorption and size sieving ability and thus H 2 /CO 2 selectivity. The specific objectives for each budget period (BP) are described below. BP 1: Identify polymer matrix with strong size sieving ability and palladium (Pd)-containing nanomaterials to prepare freestanding mixed matrix films with H 2 permeability of 50 Barrer and H 2 /CO 2 selectivity of 30 at 150-200°C with simulated syngas. BP 2: Prepare and optimize thin film mixed matrix composite membranes materials with H 2 permeance of 500 GPU and H 2 /CO 2 selectivity of 30 at 150-200 °C, and complete the modification of the membrane test unit for the field test in the BP 3. BP 3: Conduct a 20-day field test of the membranes with real syngas at Center for Advanced Energy Research (CAER) of the University of Kentucky (UKy). During the BP2, we have successfully prepared thin-film composite (TFC) membranes based on mixed matrix materials (MMMs) containing Pd nanoparticles in polymers, and demonstrated their superior and robust performance for H 2 /CO 2 separation at 150 – 225 °C. (1) Production of the Pd based nanoparticles with a diameter of 4 nm has been scaled up to 200 mg/day. (2) We have prepared TFC membranes with H 2 permeance above 500 GPU and H 2 /CO 2 selectivity above 30 at temperatures up to 225 °C, which meet the targets for the BP2. (3) We have conducted parametric studies of TFC membranes with a mixed gas containing H 2 S and H 2 O and demonstrated the stability of the membranes. (4) We have established a new testing plan at the Center for Advanced Energy Studies (CAER) at the University of Kentucky because NCCC decided to shut down their gasifier. During this project, four Ph.D. students received the inter-disciplinary training and graduated, including Shailesh Konda, Maryam Omidvar, Deqiang Yin, and Lingxiang Zhu. One postdoctoral researcher (Dr. Liang Huang) and two Ph.D. students (Abhishek Kumar and Hien Nguyen) are involved in this project. The project leads to one provisional patent application, eight peer-reviewed articles, and one manuscript in preparation. The details are shown below.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Investigating the Role of Silver Oxidation State on the Thermodynamic Interactions between Xenon and Silver-Functionalized Zeolites

The molecular level understanding of the strong adsorption of Xe to silver-modified zeolites remains elusive. Here, we probe the effect of silver oxidation state on the thermodynamics of Xe sorption in silver-functionalized zeolites by measuring the enthalpies of adsorption after various treatments using inverse gas chromatography (IGC). The enthalpy of adsorption was measured for silver-functionalized chabazites (AgCHA) before and after hydrogen reduction and subsequent reoxidation. The sorption enthalpy (ΔH) for AgCHA was 35.2 kJ/mol, which decreased to 25.8 kJ/mol with hydrogen reduction. After reoxidation (O 2 -AgCHA), 95% of the binding strength was restored. Hydrogen reduction of the base chabazite (CHA) did not influence Xe adsorption. Henry’s law constant for Xe adsorption increased in the order AgCHA > O 2 -AgCHA > H 2 -AgCHA > CHA. A decrease in enthalpy and Henry’s constant with silver reduction and increase with reoxidation suggest that ionic silver is playing a role in Xe binding. The effect of reduction and reoxidation on the zeolite microstructure was analyzed using surface area analysis, powder X-ray diffraction (p-XRD), scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), and X-ray photoelectron spectroscopy (XPS). Finally, these results lay the groundwork for better material design of strong noble gas adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulated Aging of Metal Tritides by Ball Milling Induced Gas Incorporation

The study of tritium aging effects on materials requires a significant time commitment as a consequence of its 12.3-year half-life, making developmental studies prohibitively difficult and expensive. However, detailed knowledge of long-term aging effects is critical to the development of structural and storage materials for future fusion reactor technologies. As a result, multiple approaches to simulated aging effects have been investigated. Here, we report a method of simulated tritium aging achieved though the incorporation of trapped gases via high-energy ball milling of LaNi 4.25 Al 0.75 alloy storage material. Experimental results verify the presence of trapped gases by a combination of temperature programmed desorption and LECO chemical analysis. Following gas incorporation, we find that many of the degraded hydrogen sorption properties found in aged storage materials are reproduced by the ball milled powders.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Interrogating organo-mineral interactions by Py-GC/MS and ToF-SIMS

Soil organic matter (SOM) is crucial to soil fertility and agricultural sustainability in the face of climate change, and organo-mineral interactions are a key mechanism for stabilizing SOM. The stability of mineral-associated organic matter (MAOM) can be approximated by the strength of bonds between biomolecules and mineral surfaces. We hypothesized that factors such as mineral reactivity and solution pH would impact bonding strength. To test these factors, sorption isotherms were performed on minerals differing in particle size, morphology, and reactivity (quartz, goethite, gibbsite, kaolinite, montmorillonite), under two pH conditions (4 and 6), and across a range of tannic acid concentration (0-1400 ppm). The quantity and quality of organo-mineral bonds was assessed by quantifying post-sorption solution compounds using an absorbance plate reader and assessing the thermal energy needed to break bonds using evolved gas analysis (EGA) on a pyrolysis gas chromatograph-mass spectrometer (Py-GC/MS). Organo-mineral surfaces were also interrogated using Time-of-flight secondary ion mass spectrometry (ToF-SIMS). Sorption experiments revealed an asymptotic relationship between sorbed tannic acid and increasing initial concentrations which suggests our concentration range saturated available mineral surfaces. Results indicated that mineral identity, chiefly surface area and native pH, impacted the amount of compound sorbed to mineral surfaces. Evolved gas analyses of organo-mineral samples uncovered increased thermal stability of sorbed compounds compared to our tannic acid standard particularly on the iron oxide, goethite. ToF-SIMS revealed that goethite surface ions were covered by increasing concentrations of adsorbed tannic acid with the replacement of chlorine and sulfate ions by tannic acid related ions. Our results indicate that Py-GC/MS and ToF-SIMS are useful techniques to determine the nature and strength of organo-mineral bonds and are steppingstones to understanding controls on carbon sequestration in terrestrial systems.

58 GEOSCIENCES↗
DOE OSTI2024

Metal Organic Frameworks for Noble Gas Isotope Harvesting at FRIB (Final Technical Report)

This project was a collaborative effort between Lawrence Livermore National Laboratory (LLNL) and Michigan State University (MSU) to investigate the use of promising metal organic frameworks (MOFs) for radioactive noble gas capture, with a focus on harvesting exotic radiokryptons from FRIB. After screening several candidate materials, two MOFs were selected for testing: SIFSIX-3Cu and SBMOF-1. Further evaluation showed that although SIFSIX-3Cu has a high selectivity for Kr, SBMOF-1 is less sensitive to the humidity that is present in the FRIB harvesting system and is more readily integrated into the harvesting infrastructure. SBMOF-1 was then evaluated for temperature-dependent Kr and Xe uptake in order to determine the sorption enthalpy. The SBMOF-1 data led to the design of a noble gas capture system that will be fabricated and put into service for isotope harvesting at FRIB as part of a separate project.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Developing A New NG Super-Absorbent Polymer (NG-SAP) for a Practical NG Storage System with Low Pressure, Ambient Temperature, and High Energy Density

This R&D project proposed a systematical study to develop a new class of NG super-absorbent polymer (NG-SAP) with the objective to achieve similar CNG volumetric storage level ~250 cm 3 -STP/cm 3 and fast sorption-desorption kinetics at ambient temperature but lower operational pressure (<100 bar). We suggested two consecutive research phases, including (i) a systematical investigation of various polymer systems to identify the suitable classes that can exhibit methane (C1) binding energy in the range of 20-25 kJ/mol and then (ii) focusing on the potential class polymers to identify the specific structure and morphology that can achieve the project objective.In first research phase (1st year), the major tasks included design and synthesis of several representative polymers with various structure attributes, examining their molecular structures, pore morphology, and BET surface area as the prepared samples, and then studying their C1 binding energy and sorption capacity.

03 NATURAL GAS↗
DOE OSTI2021

Solid phase characterization and transformation of illite mineral with gas-phase ammonia treatment

In situ remediation applications of ammonia (NH 3 ) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH 3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH 3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N 2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. The results of this study indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH 3 . While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO 4 ] n- ) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH 3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Next-Generation Desiccant-Based Gas Clothes Dryer Systems

The goal of the project is to develop an advanced gas clothes dryer system demonstrating significant improvements in fuel efficiency and drying performance compared to current gas clothes dryer technologies. The new system decouples latent and sensible loads to effectively utilize the latent heat associated with laundry moisture as an advantageous energy source. In other words, the system captures the waste latent heat from moisture produced during the fabric-drying process and reuses it to improve drying efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Improved Fuel Particle and Compact Matrix Fission Product Release Prediction with Improved Mass Transfer Model

This study was motivated by the need to incorporate more physics-based mass transfer models in BISON in order to improve fuel particle and compact matrix fission product release prediction. This document details the integration of new modeling capabilities in BISON, including (1) development of sorption mass transfer models; improvement of thermal contact model by adding neon to the gas gap inventory, (3) implementation of PCEA and IG-110 graphite thermal models, (4) validation using Advanced Gas Reactor (AGR)-3/4 compact and capsule rings data. These new capabilities have been shown to enforce the desired physics with satisfactory accuracy. BISON’s predictions of fission product release of AGR-3/4 compacts compare favorably with PARFUME and the concentration profiles across capsule rings show reasonable trend to the experiment measurement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Estimation of Fission Product Transport Parameters for Cesium in the AGR-3/4 TRISO Fuel Experiment

A one-dimensional (1D) finite-element model of fission product transport in the AGR-3/4 experiment has been developed using the Multiphysics Object Oriented Simulation Environment (MOOSE) framework and implemented in the fuel performance code, BISON. The model resolves capsule-specific geometries, materials, and temperature histories and simulates radial migration of fission products from the fuel compact through the inner ring, outer ring, and into the sink ring. Model parameters governing diffusion and sorption were estimated for key fission products – cesium (Cs), and europium (Eu) – by simultaneously fitting modeled isotopic concentration profiles and total ring inventories to a post-irradiation experimental measurement. These data include gamma scanning, liquid scintillation for Sr-90, radial deconsolidation leach-burn-leach analysis, tomographic reconstructions, and destructive physical sampling. A mortar-based interfacial sorption framework was implemented to enforce physically consistent mass transfer and flux conservation across gas gaps. Two classes of parameter sets were derived: a least-squares best-fit, and a safety-oriented conservative-fit, what applies strong penalties for underprediction of sink inventories. Across all twelve capsules, the model successfully reproduces the dominant radial transport trends for Cs, Sr, with decreasing concentrations from the compact outward through successive rings. Cs behavior is captured most consistently, while strontium predictions reveal systematic trade-offs between compact accuracy and conservative sink-ring bounding. The results demonstrate that sink ring weighted calibration provides conservative, safety relevant bounds on low temperature fission product transport, but at the cost of underpredicting compact inventories for Sr isotopes. These discrepancies highlight the need for additional physics, including fast-slow diffusion model, incorporating trapping mechanism in the transport behavior. Overall, this work establishes a robust, capsule-specific modeling framework for AGR-3/4 fission product transport and provides a defensible basis for parameter selection in source-term and fuel performance analyses for high temperature gas-cooled reactors.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The effect of interfacial phenomena on gas solubility measurements in molten salts

The behavior of fission gases in molten fuel salt reactors governs activity transport from the reactor and can also affect the performance of the reactor itself. The gas solubility can be described thermodynamically by Henry’s law. However, the coupling of the condensed and gas phases depends on the interfacial area, which is difficult to measure or even to estimate. Surfaces of materials in the reactor will include disperse phases in the salt and porosity within the structural materials, covering a range of compositions and sizes. These attributes can affect measurements of fundamental properties such as gas solubility. Methods to obtain gas solubility, surface tension, interfacial energies, and bubble gas transport are reviewed. Recent data from manometric experiments are interpreted based on xenon sorption onto salt-wetted quartz.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Fiber-Coupled Multipass NIR Sensor for In Situ, Real-Time Water Vapor Outgassing Monitoring

This work presents the recent development of a fiber-coupled multipass near-infrared (NIR) gas sensor used to monitor water vapor desorption of small material coupons. The gas sensor design employs a White cell topology to maximize the optical path length over a compact, hand-size footprint. Water vapor concentrations are quantified over a large dynamic range by simultaneously applying wavelength modulation and tunable diode laser absorption spectroscopy techniques. A custom headspace optimized for material desorption experiments is assembled using commercially available vacuum chamber components. We provide in situ measurements of water vapor desorption from two geometries of the industrially important silicone elastomer Sylgard-184 as a case study for sensor viability. To corroborate the results, the gas sensor data are compared to numerical simulations based on a triple-mode diffusion–sorption model, consisting of Henry, Langmuir, and Pooling modes.

gas sensor↗
DOE OSTI2025

Frontiers of Ionic Liquids in Carbon Dioxide Separation and Valorization

Ionic liquids (ILs) have emerged as highly tunable sorbents and membranes for gas separation, especially in the purification of CO 2 -containing gas streams such as air, natural gas, biogas, and syngas. Their negligible volatility, high thermal stability, and chemical versatility position them as promising alternatives to conventional amine and alkaline metal derivative-based systems, effectively addressing key challenges such as volatility, stability, and high regeneration energy. Here, this Review explores IL-derived systems for CO 2 -related gas separation across dense, porous, and supported categories. At the dense liquid level, we discuss strategies for tailoring IL properties to optimize CO 2 sorption, focusing on the correlation between IL-CO 2 interaction strength, uptake capacity, and regeneration energy. Key advancements in carbon capture, including amino-functionalized (AILs) and superbase-derived ILs (SILs), are highlighted, along with strategies such as chemical structure engineering, multiple binding site integration, alternative driving force exploration, and stability enhancement. Then, the porous liquids (PLs) scale focuses on the emerging field integrating IL properties with permanent porosity engineering, spanning ultramicropores (<5 Å) to macropores (around 100 nm). These innovations improve gas uptake capacity, accelerate transport kinetics, introduce the gating effect, and enable the coexistence of active sites with antagonistic properties within a single IL medium. At the supported IL scale, the discussion shifts to IL- and ionic pair-modified sorbents and membranes, emphasizing the modulation of cations and anions, confinement effects from porous supports, and the IL–interface interaction to enhance CO 2 separation performance, particularly in diluted gas streams. Beyond separation, this Review highlights IL-based integrated processes for CO 2 capture and conversion into value-added chemicals via thermocatalytic, electrocatalytic, and photocatalytic pathways. At each scale, advanced computational and experimental tools for IL design are also discussed, providing insights into stability enhancement, sorption efficiency, and process integration. The Review concludes by addressing existing challenges and outlining future directions for IL-driven innovations in gas separation technologies.

Qiu, Liqi [Univ. of Tennessee, Knoxville, TN (Unit↗