SEARCH · Search NASA

Results for “General aviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1997

An Investigation of General Aviation Problems and Issues: An Integration of Pilot-Cockpit Interface Research

The General Aviation (GA) industry has suffered a ten-year decline in the number of airplanes sold. This decline is due mainly to the increase cost associated with purchasing, insuring, maintaining, operating, and pilot training a GA airplane. In response to this decline the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA) developed a program (Advanced General Aviation Transport Experiments - AGATE) to address these issues. The purpose of AGATE focused within this report is to reduce the costs to acquire and maintain instrument-flight-proficiency. The AGATE program defined four elements necessary to accomplish these goals: (1) new and intuitive cockpit displays and controls, (2) situation technologies for weather, traffic, and navigation, (3) expert systems for system monitoring, and (4) reduced cost training methods. One recognized need for the GA pilot and airplane is to provide cockpit displays and systems already available to transport category airplane. These displays such as Electronic Flight and Instrument System (EFIS), graphic weather and traffic displays, and flight management systems. The goal of this grant was to develop the AGATE GA Display Evaluation Workstation as a tool to test these existing and emerging technologies in the GA environment.

Bortolussi, Michael R.↗

NASA NTRS1997

General Aviation Propulsion (GAP) Program, Turbine Engine System Element

The goal of the General Aviation Propulsion (GAP) Program Turbine Engine System Elements is to conduct a shared resource project to develop an affordable gas turbine engine for use on 4 to 6 place, light aircraft that will lead to revitalization of the general aviation industry in the United States, creating many new, high-quality jobs.

Source record↗

NASA NTRS1976

Landing practices of general aviation pilots in single-engine light airplanes

The methods and techniques used by a group of general aviation pilots during the landing phase of light airplane operations are documented. The results of 616 landings made by 22 pilots in 2 modern, four-place, single-engine, flight airplanes (one having a low wing and the other, a high wing) are presented. The landings were made on both a long runway (1524 m (5000 ft)) and a short runway (762 m (2500 ft)); both runways were considered typical of those used in general aviation. The results generally show that most of the approaches were fast with considerable floating during the flares and with touchdowns that were relatively flat or nose-low.

Goode, M. W.↗

NASA NTRS1995

The Use of the Internet to Support General Aviation Research

For the past few years, innovation in the field of General Aviation (GA) has declined. The reason for this decline has not been because of a lack of ideas, but rather a lack of funds necessary to convert these ideas into reality. NASA implemented the Small Business Innovative Research (SBIR) program in an effort to promote new technology in General Aviation. Under this program, small business with good ideas present them to NASA who reviews them and determines their value potential in the GA market. If the company's idea proves worthy, NASA subsidizes their research in three phases that include the research, testing, development, and production of their product. The purpose of my internship this summer was to use the Internet to promote the work of SBIR companies globally to prospective investors.

Rowbottom, James H.↗

NASA NTRS2017

Assessment of a Conceptual Flap System Intended for Enhanced General Aviation Safety

A novel multielement trailing-edge flap system for light general aviation airplanes was conceived for enhanced safety during normal and emergency landings. The system is designed to significantly reduce stall speed, and thus approach speed, with the goal of reducing maneuveringflight accidents and enhancing pilot survivability in the event of an accident. The research objectives were to assess the aerodynamic performance characteristics of the system and to evaluate the extent to which it provided both increased lift and increased drag required for the low-speed landing goal. The flap system was applied to a model of a light general aviation, high-wing trainer and tested in the Langley 12- Foot Low-Speed Wind Tunnel. Data were obtained for several device deflection angles, and component combinations at a dynamic pressure of 4 pounds per square foot. The force and moment data supports the achievement of the desired increase in lift with substantially increased drag, all at relatively shallow angles of attack. The levels of lift and drag can be varied through device deflection angles and inboard/outboard differential deflections. As such, it appears that this flap system may provide an enabling technology to allow steep, controllable glide slopes for safe rapid descent to landing with reduced stall speed. However, a simple flat-plate lower surface spoiler (LSS) provided either similar or superior lift with little impact on pitch or drag as compared to the proposed system. Higher-fidelity studies are suggested prior to use of the proposed system.

Campbell, Bryan A.↗

NASA NTRS1994

Icarus Rewaxed: A high speed, low-cost general aviation aircraft for Aeroworld

Icarus Rewaxed is a single engine, six passenger, general aviation airplane. With a cruise velocity of 72 ft/s, the Icarus can compete with the performance of any other airplane in its class with an eye on economics and safety. It has a very competitive initial price ($3498.00) and cost per flight ($6.36-8.40). Icarus can serve all airports in Aeroworld with a takeoff distance of 25.4 feet and maximum range of 38,000 feet. It is capable of taking off from an unprepared field with a grass depth of 3 inches. Icarus Rewaxed fills the market need for a high-speed, low cost aircraft. It provides customers with a general aviation craft that can compete in the existing performance market with the added security of an advanced structure. With the use of advanced materials, the maneuvering capability of the Icarus is increased, as it can withstand greater load factors than previous aircraft.

Farrens, Bryan↗

NASA NTRS1980

Noise reduction characteristics of general aviation type dual-pane windows

The noise reduction characteristics of general-aviation-type, dual-pane windows in various configurations have been experimentally investigated. The effects of inner and outer pane thickness, spacing between the panes, edge conditions, inclination of the inner pane and depressurization of the air in between the panes are presented. The space in between the two window panes is sealed airtight in all cases. Results show that increasing the mass of a 'floating' window pane does not increase the noise reduction below the fundamental resonance frequency. It is concluded that the concept of depressurization of the air between thin (1/8 in) Plexiglas panes and application of multiple-freedom edge conditions for the inner pane are promising to reduce noise levels in general aviation airplanes.

Grosveld, F.↗

NASA NTRS1979

General Aviation Turbine Engine (GATE) study

The feasibility of turbine engines for the smaller general aviation aircraft was investigated and a technology program for developing the necessary technology was identified. Major results included the definition of the 1988 general aviation market, the identification of turboprop and turboshaft engines that meet the requirements of the aircraft studies, a benefit analysis showing the superiority of gas turbine engines for portions of the market studied, and detailed plans for the development of the necessary technology.

Baerst, C. F.↗

NASA NTRS1980

Analysis of general aviation single-pilot IFR incident data obtained from the NASA aviation safety reporting system

Data obtained from the NASA Aviation Safety Reporting System (ASRS) data base were used to determine problems in general aviation single pilot IFR operations. The data examined consisted of incident reports involving flight safety in the National Aviation System. Only those incidents involving general aviation fixed wing aircraft flying under IFR in instrument meteorological conditions were analyzed. The data were cataloged into one of five major problem areas: (1) controller judgement and response problems; (2) pilot judgement and response problems; (3) air traffic control intrafacility and interfacility conflicts; (4) ATC and pilot communications problems; and (5) IFR-VFR conflicts. The significance of the related problems, and the various underlying elements associated with each are discussed. Previous ASRS reports covering several areas of analysis are reviewed.

Bergeron, H. P.↗

NASA NTRS1979

NASA/FAA general aviation crash dynamics program - A status report

The objective of the Langley Research Center general aviation crash dynamics program is to develop technology for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: controlled full-scale crash testing, nonlinear structural analyses to predict large deflection elasto-plastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and complex computerized procedures for predicting airframe response. These analyses are being developed to provide designers with methods for predicting accelerations, loads, and displacements of collapsing structure. Tests on typical full-scale aircraft and on full- and sub-scale structural components are being performed to verify the analyses and to demonstrate load attenuating concepts.

Thomson, R. G.↗

NASA NTRS1973

General aviation air traffic pattern safety analysis

A concept is described for evaluating the general aviation mid-air collision hazard in uncontrolled terminal airspace. Three-dimensional traffic pattern measurements were conducted at uncontrolled and controlled airports. Computer programs for data reduction, storage retrieval and statistical analysis have been developed. Initial general aviation air traffic pattern characteristics are presented. These preliminary results indicate that patterns are highly divergent from the expected standard pattern, and that pattern procedures observed can affect the ability of pilots to see and avoid each other.

Parker, L. C.↗

NASA NTRS1975

A review of the NASA V-G/VGH general aviation program

The V-G and VGH data collected from a wide variety of general aviation airplanes since the inception of the NASA V-G/VGH General Aviation Program in 1962 are presented. These data were analyzed to obtain information on the gust and maneuver loads, on the operating practices, and on the effects of different types of operations on these parameters.

Jewel, J. W., Jr.↗

NASA NTRS1975

Evaluation of several navigation algorithms for application to general aviation

Using data obtained in flight, three position determining algorithms for use by general aviation aircraft were evaluated representing increasing software requirements. These were a DME only, DME/air data and blended DME/air data. Although each step represented additional software with resultant increase in position accuracy, all could be performed on a programmable electronic desk calculator. Results from the computation of aircraft position using the three algorithms are presented. The algorithms employed can be extended to accept VOR, TACAN bearing, ADF, or other NAVAID Data. To obtain the flight data an experimental system was configured and flown on a general aviation aircraft. Principal hardware elements (all with low-cost potential) were a programmable calculator, a single DME receiver (multiplexed for multiple DME use) and a low-cost air speed sensor (shed-vortex principle). The flight test demonstrated satisfactory performance of these principal elements.

Conrad, B.↗

NASA NTRS1980

Assessment of risk due to the use of carbon fiber composites in commercial and general aviation

The development of a national risk profile for the total annual aircraft losses due to carbon fiber composite (CFC) usage through 1993 is discussed. The profile was developed using separate simulation methods for commercial and general aviation aircraft. A Monte Carlo method which was used to assess the risk in commercial aircraft is described. The method projects the potential usage of CFC through 1993, investigates the incidence of commercial aircraft fires, models the potential release and dispersion of carbon fibers from a fire, and estimates potential economic losses due to CFC damaging electronic equipment. The simulation model for the general aviation aircraft is described. The model emphasizes variations in facility locations and release conditions, estimates distribution of CFC released in general aviation aircraft accidents, and tabulates the failure probabilities and aggregate economic losses in the accidents.

Fiksel, J.↗

NASA NTRS1995

Entrepreneurship within General Aviation

Many modern economic theories place great importance upon entrepreneurship in the economy. Some see the entrepreneur as the individual who bears risk of operating a business in the face of uncertainty about future conditions and who is rewarded through profits and losses. The 20th century economist Joseph Schumpter saw the entrepreneur as the medium by which advancing technology is incorporated into society as businesses seek competitive advantages through more efficient product development processes. Due to the importance that capitalistic systems place upon entrepreneurship, it has become a well studied subject with many texts to discuss how entrepreneurs can succeed in modern society. Many entrepreneuring and business management courses go so far as to discuss the characteristic phases and prominent challenges that fledgling companies face in their efforts to bring a new product into a competitive market. However, even with all of these aids, start-up companies fail at an enormous rate. Indeed, the odds of shepherding a new company through the travails of becoming a well established company (as measured by the ability to reach Initial Public Offering (IPO)) have been estimated to be six in 1,000,000. Each niche industry has characteristic challenges which act as barriers to entry for new products into that industry. Thus, the applicability of broad generalizations is subject to limitations within niche markets. This paper will discuss entrepreneurship as it relates to general aviation. The goals of this paper will be to: introduce general aviation; discuss the details of marrying entrepreneurship with general aviation; and present a sample business plan which would characterize a possible entrepreneurial venture.

Ullmann, Brian M.↗

NASA NTRS2000

General Aviation in Nebraska: Nebraska SATS Project Background Paper No. 1

The Nebraska SATS project is a state-level component of NASA's Small Aircraft Transportation System (SATS). During the next several years the project will examine several different factors affecting SATS implementation in Nebraska. These include economic and taxation issues, public policy issues, airport planning processes, information dissemination strategies, and systemic change factors. This background paper profiles the general aviation system in Nebraska. It is written to provide information about the "context" within which SATS will be pursued. The primary focus is thus on describing and providing background information about the current situation. A secondary focus is on drawing general conclusions about the ability of the current system to incorporate the types of changes implied by SATS. First, some brief information on the U.S. aviation system is provided. The next two sections profile the current general aviation aircraft and pilot base. Nebraska's system of general aviation airports is then described. Within this section of the paper, information is provided on the different types of general aviation airports in Nebraska, airport activity levels and current infrastructure. The fourth major section of the background paper looks at Nebraska's local airport authorities. These special purpose local governments oversee the majority of the general aviation airports in the state. Among the items examined are total expenditures, capital expenditures and planning activities. Next, the paper provides background information on the Nebraska Department of Aeronautics (NDA) and recent Federal funding for general aviation in Nebraska. The final section presents summary conclusions.

Smith, Russell↗

NASA NTRS1983

Design, implementation and flight testing of PIF autopilots for general aviation aircraft

The designs of Proportional-Integrated-Filter (PIF) auto-pilots for a General Aviation (NAVION) aircraft are presented. The PIF autopilot uses the sampled-data regulator and command generator tracking to determine roll select, pitch select, heading select, altitude select and localizer/glideslope capture and hold autopilot modes. The PIF control law uses typical General Aviation sensors for state feedback, command error integration for command tracking, digital complementary filtering and analog prefiltering for sensor noise suppression, a control filter for computation delay accommodation and the incremental form to eliminate trim values in implementation. Theoretical developments described in detail, were needed to combine the sampled-data regulator with command generator tracking for use as a digital flight control system. The digital PIF autopilots are evaluated using closed-loop eigenvalues and linear simulations. The implementation of the PIF autopilots in a digital flight computer using a high order language (FORTRAN) is briefly described. The successful flight test results for each PIF autopilot mode is presented.

Broussard, J. R.↗

NASA NTRS1982

Design and flight testing of a digital optimal control general aviation autopilot

This paper presents the designs of Proportional-Integral-Filter (PIF) autopilots for a General Aviation (NAVION) aircraft. The PIF autopilots use modern control theory to determine heading select and altitude select and hold autopilot modes. The PIF control law uses typical General Aviation sensors for state feedback; command error integration for command tracking; digital complimentary filtering and analog prefiltering for sensor noise suppression; a control filter for computation delay accommodation; and the incremental form to eliminate trim values in implementation. Theoretical developments for the control law are described which combine the sampled-data regulator with command generator tracking for use as a digital flight control system. The digital PIF autopilots are evaluated using closed-loop eigenvalues and simulations. Successful flight test results for the PIF autopilots are presented for different turbulence conditions and quadratic weights.

Broussard, J. R.↗