Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Development of SAM Code Capabilities for Safety Analysis of GCR Air-ingress Events

Air-ingress following a depressurized loss-of-forced-cooling (DLOFC) event is a challenging, multiphysics safety scenario for High-Temperature Gas-Cooled Reactors (HTGRs), involving coupled gas composition transport, buoyancy-driven flow redistribution, graphite oxidation, and structural heat-up. Despite its importance — air ingress is a key scenario identified in the PIRT process for the HTGRs — existing system-level safety codes have lacked the integrated capability to simulate the complete event sequence with high confidence. This report documents the development, validation, and demonstration of three new capabilities in the SAM code to address this gap: (1) a multi-component gas mixture flow model with binary diffusion to track the helium-air composition and its effect on system density and flow; (2) a 0-D graphite oxidation model based on the Roes correlation, including oxygen consumption and exothermic heat release; and (3) an isentropic critical flow model for accurate representation of primary system depressurization through a break. These capabilities are validated against two benchmark experiments. The NSTF heavy-gas ingress experiment validates the multi-component flow model: SAM correctly reproduces the rapid buoyancydriven flow stagnation and subsequent natural circulation recovery driven by composition-dependent density changes. The NACOK graphite oxidation experiment validates the oxidation model: SAM predicts a bottom-level graphite weight loss of 25%, in close agreement with the measured 24%, and reproduces the strong axial nonuniformity and block-geometry dependence of oxidation, at a level comparable to the SPECTRA and TINTE codes. The validated capabilities are then exercised together in an integrated, reactor-scale simulation of a DLOFC air-ingress transient in a simplified HTR-PM pebble-bed reactor. In a single calculation spanning approximately 8 days, SAM reproduces the complete accident sequence: rapid depressurization, densityand diffusion-driven air ingress over ˜15 hours, onset of buoyancy-driven natural circulation, exothermic graphite oxidation with a peak fuel temperature at ˜62 hours, and eventual passive cooldown. These results demonstrate that SAM now provides the nuclear community with a preliminarily validated, modern systemlevel tool for HTGR air-ingress safety analysis, filling a recognized capability gap. Future extensions to broaden species tracking, improve oxidation chemistry, and refine the reactor model are discussed.

Yang, Gang↗

STUDY ON AIR INGRESS MITIGATION METHODS IN THE VERY HIGH TEMPERATURE GAS COOLED REACTOR (VHTR)

An air-ingress accident followed by a pipe break is considered as a critical event for a very high temperature gas-cooled reactor (VHTR). Following helium depressurization, it is anticipated that unless countermeasures are taken, air will enter the core through the break leading to oxidation of the in-core graphite structure. Thus, without mitigation features, this accident might lead to severe exothermic chemical reactions of graphite and oxygen. Under extreme circumstances, a loss of core structural integrity may occur along with excessive release of radiological inventory. Idaho National Laboratory under the auspices of the U.S. Department of Energy is performing research and development (R&D) that focuses on key phenomena important during challenging scenarios that may occur in the VHTR. Phenomena Identification and Ranking Table (PIRT) studies to date have identified the air ingress event, following on the heels of a VHTR depressurization, as very important (Oh et al. 2006, Schultz et al. 2006). Consequently, the development of advanced air ingress-related models and verification and validation (V&V) requirements are part of the experimental validation plan. This paper discusses about various air-ingress mitigation concepts applicable for the VHTRs. The study begins with identifying important factors (or phenomena) associated with the air-ingress accident by using a root-cause analysis. By preventing main causes of the important events identified in the root-cause diagram, the basic air-ingress mitigation ideas can be conceptually derived. The main concepts include (1) preventing structural degradation of graphite supporters; (2) preventing local stress concentration in the supporter; (3) preventing graphite oxidation; (4) preventing air ingress; (5) preventing density gradient driven flow; (4) preventing fluid density gradient; (5) preventing fluid temperature gradient; (6) preventing high temperature. Based on the basic concepts listed above, various air-ingress mitigation methods are proposed in this study. Among them, the following two mitigation ideas are extensively investigated using computational fluid dynamic codes (CFD): (1) helium injection in the lower plenum, and (2) reactor enclosure opened at the bottom. The main idea of the helium injection method is to replace air in the core and the lower plenum upper part by buoyancy force. This method reduces graphite oxidation damage in the severe locations of the reactor inside. To validate this method, CFD simulations are addressed here. A simple 2-D CFD model is developed based on the GT-MHR 600MWt design. The simulation results showed that the helium replace the air flow into the core and significantly reduce the air concentration in the core and bottom reflector potentially protecting oxidation damage. According to the simulation results, even small helium flow was sufficient to remove air in the core, mitigating the air-ingress successfully. The idea of the reactor enclosure with an opening at the bottom changes overall air-ingress mechanism from natural convection to molecular diffusion. This method can be applied to the current system by some design modification of the reactor cavity. To validate this concept, this study also uses CFD simulations based on the simplified 2-D geometry. The simulation results showed that the enclosure open at the bottom can successfully mitigate air-ingress into the reactor even after on-set natural circulation occurs.

99 GENERAL AND MISCELLANEOUS↗

Scalable Preparation of Ternary Hierarchical Silicon Oxide-Nickel-Graphite Composites for Lithium-Ion Batteries

Silicon monoxide is a promising anode candidate because of its high theoretical capacity and good cycle performance. To solve the problems associated with this material, including large volume changes during charge-discharge processes, we report a ternary hierarchical silicon oxide–nickel–graphite composite prepared by a facile two-step ball-milling method. The composite consists of nano-Si dispersed silicon oxides embedded in nano-Ni/graphite matrices (Si@SiOx/Ni/graphite). In the composite, crystalline nano-Si particles are generated by the mechanochemical reduction of SiO by ball milling with Ni. These nano-Si dispersed oxides have abundant electrochemical activity and can provide high Li-ion storage capacity. Furthermore, the milled nano-Ni/graphite matrices stick well to active materials and interconnect to form a crosslinked framework, which functions as an electrical highway and a mechanical backbone so that all silicon oxide particles become electrochemically active. Owing to these advanced structural and electrochemical characteristics, the composite enhances the utilization efficiency of SiO, accommodates its large volume expansion upon cycling, and has good ionic and electronic conductivity. The composite electrodes thus exhibit substantial improvements in electrochemical performance. This ternary hierarchical Si@SiOx/Ni/graphite composite is a promising candidate anode material for high-energy lithium-ion batteries. Additionally, the mechanochemical ball-milling method is low cost and easy to reproduce, indicating potential for the commercial production of the composite materials.

25 ENERGY STORAGE↗

Carbon-based Supercapacitors Produced by Activation of Graphene

Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp{sup 2}-bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

08 HYDROGEN↗

Preparation of Exfoliated Graphite Modified with Magnesium Ferrite

A magnetic sorbent based on exfoliated graphite modified with magnesium ferrite has been prepared by impregnating oxidized graphite in a mixed solution of FeCl{sub 3} and Mg(NO{sub 3}){sub 2}, followed by heat treatment of the impregnated oxidized graphite in air. X-ray diffraction and Mössbauer spectroscopy results demonstrate that the structure of the magnesium ferrite is an inverse spinel with a degree of inversion of 0.59. The saturation magnetization of the magnesium ferrite-containing exfoliated graphite is 16.1 emu/g, whereas its oil sorption capacity is as high as 54 g/g. Compaction of the exfoliated graphite to a density of 0.03 g/cm{sup 3} reduced its sorption capacity to 26 g/g. Further increasing the density of the material led to a considerable decrease in its sorption capacity.

36 MATERIALS SCIENCE↗

Fabrication and physicochemical characterization of graphene oxide derived from thermally expanded graphite

Graphene oxide was obtained from expanded graphite according to the modified Hummers method. The reaction time was significantly reduced (from 24 to 8 h) by applying the expanded graphite in the oxidation process. The interlayer distance in obtained samples was equal to 0.70–0.74 nm. Structural features of the material were studied by the powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, XPS spectroscopy, and NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method of producing exfoliated graphite, flexible graphite, and nano-scaled graphene platelets

The present invention provides a method of exfoliating a layered material (e.g., graphite and graphite oxide) to produce nano-scaled platelets having a thickness smaller than 100 nm, typically smaller than 10 nm. The method comprises (a) dispersing particles of graphite, graphite oxide, or a non-graphite laminar compound in a liquid medium containing therein a surfactant or dispersing agent to obtain a stable suspension or slurry; and (b) exposing the suspension or slurry to ultrasonic waves at an energy level for a sufficient length of time to produce separated nano-scaled platelets. The nano-scaled platelets are candidate reinforcement fillers for polymer nanocomposites. Nano-scaled graphene platelets are much lower-cost alternatives to carbon nano-tubes or carbon nano-fibers.

Zhamu, Aruna↗

Pore structure development in oxidized IG-110 nuclear graphite

The oxidation-induced porosity development in nuclear graphite has great effect on its mechanical behavior, thus it is very important to understand the pore structure development of nuclear graphite during oxidation. This paper reports on the oxidation kinetics of grade IG-110 nuclear graphite and the porosity development in oxidized samples. The distribution of the oxidized layer in IG-110 specimens oxidized at 600-750 C was studied using optical microscopy coupled with automated image analysis technique, and the mechanism of porosity development was determined. The thickness of oxidized layer decreased with the oxidation temperature but was independent of the weight loss level. Oxidation caused consumption of graphite structure and development of porosity, which was initiated from the binder phase. Statistical analysis indicated that generation and growth of pores was dominant at low temperatures, while merging and collapse of pores was the main effect at high temperatures. Compared with medium-grained PCEA graphite, the fine-grained IG-110 graphite demonstrates deeper penetration of the oxidant because of its higher pore density and lager porosity.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a nanocomposite of goethite nanorods and reduced graphene oxide for electrochemical capacitors

We report a one-step synthesis of a nanocomposite of goethite ({alpha}-FeOOH) nanorods and reduced graphene oxide (RGO) using a solution method in which ferrous cations serve as a reducing agent of graphite oxide (GO) to graphene and a precursor to grow goethite nanorods. As-prepared goethite nanorods have an average length of 200 nm and a diameter of 30 nm and are densely attached on both sides of the RGO sheets. The electrochemical properties of the nanocomposite were characterized by cyclic voltammetry (CV) and chronopotentiometry (CP) charge-discharge tests. The results showed that goethite/RGO composites have a high electrochemical capacitance of 165.5 F g{sup -1} with an excellent recycling capability making the material promising for electrochemical capacitors. - Graphical abstract: The reduced graphene oxide sheets are decorated with goethite nanorods. The as-prepared composite exhibits a high electrochemical capacitance with good recycling capability, which is promising for supercapacitor applications. Higlights: Black-Right-Pointing-Pointer Ferrous ions act as reductant of graphite oxide and precursor of goethite nanorods. Black-Right-Pointing-Pointer Goethite nanorods are attached on both sides of the reduced graphene oxide sheets. Black-Right-Pointing-Pointer Composite exhibits a high specific capacitance and a good recycling capability. Black-Right-Pointing-Pointer Composite is promising for supercapacitor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using CFD tools to model separate effects of HTR air ingress accident phenomena - 18508

The air ingress phenomena under the HTR conditions represent the important area of nuclear safety. Best practice guidelines for the use of CFD in nuclear safety applications are mainly based on water cooled reactors while in HTR the gas is used as a coolant. The ambition of this paper is to define the best recommendations and description of needed settings of CFD models solving the separate effects of air ingress accident phenomena. The JAERI experiments deal with phenomena of air ingress during the early stages of the accident. Experiments investigate the basic features of the flow behavior of the gas mixture and regard the phenomena of the molecular diffusion and the natural convection of the gas mixture with the graphite oxidation reaction. The separate effects simulations of air ingress accident were performed using CFD code ANSYS Fluent. Whole graphite oxidation process including all three main chemical reactions was successfully modeled. The new findings and useful information were gathered to be extrapolated to the integral effects level for the following phase. The role of the computational mesh and all important input parameters were discussed in detail and many in sensitivity studies were performed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Catalyzed oxidation of nuclear graphite by simulated fission products Sr, Eu, and I

The influence of three fission products Sr, Eu, and I on the oxidation of IG-110 nuclear graphite was studied in the temperature range of 400 to 1000 °C. Sr and Eu were introduced as chlorides, and I was introduced as NaI. The temperature dependence of both CO 2 and CO production during the graphite oxidation measured with mass spectroscopy and infrared spectrometry shows that the introduction of these three compounds to graphite significantly decreases the onset temperature for the oxidation of graphite. Among the three compounds, NaI is the most active towards the oxidation reaction, characterized by a significant decrease of the onset temperature from approximately 650 to 400 °C before and after its introduction to graphite. Separate measurements of CO 2 and CO concentration at varying temperatures enable the calculation of the activation energy for the formation of CO 2 and CO. The activation energies for the oxidation of pure and fission product-impregnated graphite samples decrease in the following order: standard IG-110 graphite, EuCl 3 -impregnated IG-110, SrCl 2 -impregnated IG-110, and NaI-impregnated IG-110. This trend indicates that the three compounds catalyze the oxidation of graphite at temperatures relevant to the operation of high-temperature gas-cooled reactors. Furthermore, it is found that the three compounds can also affect the molar ratio of reaction products CO 2 and CO, and the rates of the graphite oxidation. At temperatures higher than about 850 °C, the impregnated samples exhibit lower CO 2 : CO ratios than the pure graphite. Different from EuCl 3 and NaI, the introduction of SrCl 2 decreases the graphite oxidation rates at temperatures higher than about 770 °C. Their catalytic mechanism can be understood based on a redox cycle of the intermediate active species, promoting the dissociation of molecular oxygen and transfer to the carbon.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nitrogen-doped graphene as transparent counter electrode for efficient dye-sensitized solar cells

Graphical abstract: Display Omitted Highlights: ► NG sheets are prepared through a hydrothermal reduction of graphite oxide. ► The transparent NG counter electrodes of DSCs are fabricated at room temperature. ► Transparent NG electrode exhibits excellent catalytic activity for the reduction of I{sub 3}{sup −}. ► The DSC with NG electrode achieves a comparable efficiency to that of the Pt-based cell. ► The efficiency of rear illumination is about 85% that of front illumination. -- Abstract: Nitrogen-doped graphene sheets are prepared through a hydrothermal reduction of graphite oxide in the presence of ammonia and applied to fabricate the transparent counter electrode of dye-sensitized solar cells. The atomic percentage of nitrogen in doped graphene sample is about 2.5%, and the nitrogen bonds display pyridine and pyrrole-like configurations. Cyclic voltammetry studies demonstrate a much higher electrocatalytic activity toward I{sup −}/I{sub 3}{sup −} redox reaction for nitrogen-doped graphene, as compared with pristine graphene. The dye-sensitized solar cell with this transparent nitrogen-doped graphene counter electrode shows conversion efficiencies of 6.12% and 5.23% corresponding to front-side and rear-side illumination, respectively. Meanwhile, the cell with a Pt counter electrode shows a conversion efficiency of 6.97% under the same experimental condition. These promising results highlight the potential application of nitrogen-doped graphene in cost-effective, transparent dye-sensitized solar cells.

36 MATERIALS SCIENCE↗

Nanoscale electrostatic control in ultraclean van der Waals heterostructures by local anodic oxidation of graphite gates

In an all-van der Waals heterostructure, the active layer, gate dielectrics and gate electrodes are assembled from two-dimensional crystals that have a low density of atomic defects. This design allows two-dimensional electron systems with very low disorder to be created, particularly in heterostructures where the active layer also has intrinsically low disorder, such as crystalline graphene layers or metal dichalcogenide heterobilayers. A key missing ingredient has been nanoscale electrostatic control, with existing methods for fabricated local gates typically introducing unwanted contamination. Here we describe a resist-free local anodic oxidation process for patterning sub-100 nm features in graphite gates, and their subsequent integration into an all-van der Waals heterostructure. We define a quantum point contact in the fractional quantum Hall regime as a benchmark device and observe signatures of chiral Luttinger liquid behaviour, indicating an absence of extrinsic scattering centres in the vicinity of the point contact. In the integer quantum Hall regime, we demonstrate in situ control of the edge confinement potential, a key requirement for the precision control of chiral edge states. In conclusion, this technique may enable the fabrication of devices capable of single anyon control and coherent edge-state interferometry in the fractional quantum Hall regime.

36 MATERIALS SCIENCE↗

Ultracapacitor with a novel doped carbon

Doped activated microwave expanded graphite oxide materials and doped monolayer graphene materials, and methods of making these materials. The materials exhibit increased capacitance relative to undoped activated microwave expanded graphite oxide and monolayer graphene. The materials are suitable for use in, for example, ultracapacitors.

36 MATERIALS SCIENCE↗

Insights from incorporating reference electrodes in symmetric lithium-ion cells with layered oxide or graphite electrodes

Symmetric cells provide complementary means to probe electrochemical processes in lithium-ion batteries. Here, positive and negative electrodes harvested from conventional oxide/graphite cells are cross-paired, and the assembled reference-electrode-bearing symmetric cells are cycled/aged. For graphite symmetric cells, the electrode potentials and impedances remain nearly constant during calendar aging and the parasitic currents are typically small. However, at higher cell voltages when the “positive” graphite potential exceeds 1.0 V vs. Li/Li + , the capacity loss is higher, indicating that even a mild (but prolonged) overdischarge can damage the SEI. For the layered-oxide symmetric cells there are strong parasitic currents and a persistent slide of the electrode potential over time during calendar aging. Significant cell impedance rise, especially at higher hold voltages, is also observed. Curiously, the impedance rise in the “negative” oxide electrode, which experiences potentials below 4.0 V vs. Li/Li + , is greater than in the “positive” oxide electrode that experiences much higher potentials. We postulate that electrolyte oxidation is responsible for the behavior of these oxide symmetric cells, as it supplies electrons (that bind more Li + into the cathode, causing the potential slide) and protons (that contribute to impedance rise). Furthermore, these insights can guide the development of future lithium-ion cell chemistries.

25 ENERGY STORAGE↗

Study of YBa{sub 2}Cu{sub 3}O{sub 7−δ} Superconductor/Graphene Oxide Composite

The aim of this research was to fabricate YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) superconductor composite with graphene oxide nanosheets and to study the effect of the graphene oxide nanosheets on YBCO superconductor properties. For this purpose, the samples of pure superconductor and superconductor composite with 0.001, 0.01, and 0.1 wt.% graphene oxide were synthesized. First, graphite oxide was made by Hummer’s chemical method; after that, graphene oxide nanosheets were produced by bath-keeper ultrasonic. Then, different amounts of graphene oxide were added to the process of superconductor fabrication, which was made by solid-state reaction method. The samples were characterized and studied by Meissner effect test, XRD analysis, FESEM imaging, EDX measurement, and ac magnetic susceptibility. The critical current density (J{sub c}) of samples was measured by four probes method. The results showed that by increasing the weight ratio of graphene oxide, J{sub c} and T{sub c} decrease.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗