Search NASA⌕ Search

SEARCH · Search NASA

Results for “Group Contribution Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Can the Analysis of ERCC1 Expression Contribute to Individualized Therapy in Nasopharyngeal Carcinoma?

Purpose: To analyze the expression of excision repair cross-complementation group 1 (ERCC1) protein in predicting the clinical outcome of nasopharyngeal carcinoma (NPC). Methods and Materials: The histologic specimens of 258 patients with Stage III to IVB nonkeratinizing NPC who were treated with radiotherapy alone (Group I) or concurrent-adjuvant chemoradiotherapy (Group II) were retrieved. Immunostaining on ERCC1 protein was performed. The relationship of ERCC1 expression and clinical outcomes was analyzed. Results: The median ERCC1 score (proportion score of positively stained cells times intensity) was 200 (range, 0-300), and ERCC1 expression was defined as high if the score was above the median. In Group I high-score tumor had a statistically lower locoregional failure-free rate (LRFFR) compared with low-score tumor (p < 0.05) but not distant failure-free rate (DFFR) and overall survival (OS). In Group II no statistically differences were noted in LRFFR, DFFR and OS with regard to the ERCC1 expression. Resistance to cisplatin-containing chemotherapy in high-ERCC1 score tumor was not observed in Group II. Interestingly, low-score tumor in Group I achieved similar local and distant control compared with Group II. Multivariate analysis showed that ERCC1 score was an independent prognostic factor in LRFFR (p < 0.05) and approached statistical significance in failure-free survival (p = 0.08) and OS (p = 0.07). Tumor with high ERCC1 score had a 2-fold (95% confidence interval, 1.02-3.85) increased risk of locoregional failure. This may imply an association of ERCC1 expression with the repair of radiation damage. Conclusions: High ERCC1 expression predicts poor locoregional control in NPC. Chemotherapy response is not affected by ERCC1 expression. Further validation is required.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A high-bandwidth amplitude estimation technique for dynamic mode atomic force microscopy

While often overlooked, one of the prerequisites for high-speed amplitude modulation atomic force microscopy is a high-bandwidth amplitude estimation technique. Conventional techniques, such as RMS to DC conversion and the lock-in amplifier, have proven useful, but offer limited measurement bandwidth and are not suitable for high-speed imaging. Several groups have developed techniques, but many of these are either difficult to implement or lack robustness. In this contribution, we briefly outline existing amplitude estimation methods and propose a new high-bandwidth estimation technique, inspired by techniques employed in microwave and RF circuit design, which utilizes phase cancellation to significantly improve the performance of the lock-in amplifier. We conclude with the design and implementation of a custom circuit to experimentally demonstrate the improvements and discuss its application in high-speed and multifrequency atomic force microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiative-nonrecoil corrections of order {alpha}{sup 2}(Z{alpha}){sup 5} to the Lamb shift

We present results for the corrections of order {alpha}{sup 2}(Z{alpha}){sup 5} to the Lamb shift. We compute all the contributing Feynman diagrams in dimensional regularization and a general covariant gauge using a mixture of analytical and numerical methods. We confirm results obtained by other groups and improve their precision. Values of the 32''master integrals'' for this and similar problems are provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Novel Coarsening Method for Scalable and Efficient Mesh Generation

In this paper, we propose a novel mesh coarsening method called brick coarsening method. The proposed method can be used in conjunction with any graph partitioners and scales to very large meshes. This method reduces problem space by decomposing the original mesh into fixed-size blocks of nodes called bricks, layered in a similar way to conventional brick laying, and then assigning each node of the original mesh to appropriate brick. Our experiments indicate that the proposed method scales to very large meshes while allowing simple RCB partitioner to produce higher-quality partitions with significantly less edge cuts. Our results further indicate that the proposed brick-coarsening method allows more complicated partitioners like PT-Scotch to scale to very large problem size while still maintaining good partitioning performance with relatively good edge-cut metric. Graph partitioning is an important problem that has many scientific and engineering applications in such areas as VLSI design, scientific computing, and resource management. Given a graph G = (V,E), where V is the set of vertices and E is the set of edges, (k-way) graph partitioning problem is to partition the vertices of the graph (V) into k disjoint groups such that each group contains roughly equal number of vertices and the number of edges connecting vertices in different groups is minimized. Graph partitioning plays a key role in large scientific computing, especially in mesh-based computations, as it is used as a tool to minimize the volume of communication and to ensure well-balanced load across computing nodes. The impact of graph partitioning on the reduction of communication can be easily seen, for example, in different iterative methods to solve a sparse system of linear equation. Here, a graph partitioning technique is applied to the matrix, which is basically a graph in which each edge is a non-zero entry in the matrix, to allocate groups of vertices to processors in such a way that many of matrix-vector multiplication can be performed locally on each processor and hence to minimize communication. Furthermore, a good graph partitioning scheme ensures the equal amount of computation performed on each processor. Graph partitioning is a well known NP-complete problem, and thus the most commonly used graph partitioning algorithms employ some forms of heuristics. These algorithms vary in terms of their complexity, partition generation time, and the quality of partitions, and they tend to trade off these factors. A significant challenge we are currently facing at the Lawrence Livermore National Laboratory is how to partition very large meshes on massive-size distributed memory machines like IBM BlueGene/P, where scalability becomes a big issue. For example, we have found that the ParMetis, a very popular graph partitioning tool, can only scale to 16K processors. An ideal graph partitioning method on such an environment should be fast and scale to very large meshes, while producing high quality partitions. This is an extremely challenging task, as to scale to that level, the partitioning algorithm should be simple and be able to produce partitions that minimize inter-processor communications and balance the load imposed on the processors. Our goals in this work are two-fold: (1) To develop a new scalable graph partitioning method with good load balancing and communication reduction capability. (2) To study the performance of the proposed partitioning method on very large parallel machines using actual data sets and compare the performance to that of existing methods. The proposed method achieves the desired scalability by reducing the mesh size. For this, it coarsens an input mesh into a smaller size mesh by coalescing the vertices and edges of the original mesh into a set of mega-vertices and mega-edges. A new coarsening method called brick algorithm is developed in this research. In the brick algorithm, the zones in a given mesh are first grouped into fixed size blocks called bricks. These brick are then laid in a way similar to conventional brick laying technique, which reduces the number of neighboring blocks each block needs to communicate. Contributions of this research are as follows: (1) We have developed a novel method that scales to a really large problem size while producing high quality mesh partitions; (2) We measured the performance and scalability of the proposed method on a machine of massive size using a set of actual large complex data sets, where we have scaled to a mesh with 110 million zones using our method. To the best of our knowledge, this is the largest complex mesh that a partitioning method is successfully applied to; and (3) We have shown that proposed method can reduce the number of edge cuts by as much as 65%.

97 MATHEMATICS AND COMPUTING↗

Element-resolved Kikuchi pattern measurements of non-centrosymmetric materials

Angle-resolved electron Rutherford backscattering (ERBS) measurements using an electrostatic electron energy analyser can provide unique access to element-resolved crystallographic information. We present Kikuchi pattern measurements of the non-centrosymmetric crystal GaP, separately resolving the contributions of electrons backscattered from Ga and P. In comparison to element-integrated measurements like in the method of electron backscatter diffraction (EBSD), the effect of the absence of a proper 4-fold rotation axis in the point group of GaP can be sensed with a much higher visibility via the element-resolved Ga to P intensity ratio. These element-resolved measurements make it possible to experimentally attribute the previously observed point-group dependent effect in element-integrated EBSD measurements to the larger contribution of electrons scattered from Ga compared to P. - Highlights: •Element specific Kikuchi patterns are presented for GaP. •Absence of a proper four-fold rotation axis is demonstrated. •Ga and P intensity variations after 90 degree rotation have opposite phase. •The asymmetry in the total intensity distribution resembles that of Ga.

36 MATERIALS SCIENCE↗

Sequential oxidation-depolymerization strategies for lignin conversion to low molecular weight aromatic chemicals

Lignin is the largest source of bio-derived aromatic chemicals, and oxidative conversion of this polymeric material can generate valuable oxygenated aromatic compounds. Oxidative depolymerization of lignosulfonate feedstocks under alkaline conditions is used commercially for vanillin production. Recent studies have led to other oxidation methods that access different aromatic products from lignin in good yields. A particularly effective strategy that accesses some of the highest yields of aromatic monomers to date features a two-step process in which the oxidation of specific alcohol groups in lignin is followed by an oxidative, reductive, or redoxneutral step that cleaves the polymer into aromatic monomers and oligomers. Studies of model compounds have provided crucial mechanistic insights and contributed to the development of effective lignin depolymerization methods. Furthermore, this review provides a general overview of lignin depolymerization methods, followed by a survey of oxidation-depolymerization methods that access oxygenated aromatic monomers in good yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gradient-based Optimization for Regression in the Functional Tensor-Train Format

We consider the task of low-multilinear-rank functional regression, i.e., learning a low-rank parametric representation of functions from scattered real-valued data. Our first contribution is the development and analysis of gradient-based optimization procedures, including stochastic gradient descent and quasi-Newton methods, for learning the parameters of a functional tensor-train (FT) that yields improved accuracy over standard alternating least squares methods. The functional tensor-train uses the tensor-train (TT) representation of low-rank arrays as an ansatz for a class of low-multilinear-rank functions. The FT is represented by a set of matrix-valued functions that contain a set of univariate functions, and the regression task is to learn the parameters of these univariate functions. Our second contribution demonstrates that using nonlinearly parameterized univariate functions, e.g., symmetric kernels with moving centers, within each core can outperform the standard approach of using a linear expansion of basis functions. Our final contributions are new rank adaptation and group-sparsity regularization procedures to minimize overfitting. We use several benchmark problems to demonstrate at least an order of magnitude lower accuracy with gradient-based optimization methods than ALS in the low-sample number regime. We also demonstrate an order of magnitude reduction in accuracy on a test problem resulting from nonlinear parameterizations over linear parameterizations. Finally we compare regression performance with 22 other nonparametric and parametric regression methods on 10 real-world data sets. We achieve top-five accuracy for seven of the data sets and best accuracy for two of the data sets. These rankings are the best amongst parametric models and competetive with the best non-parametric methods.

97 MATHEMATICS AND COMPUTING↗

Functionalisation of Detonation Nanodiamond for Monodispersed, Soluble DNA-Nanodiamond Conjugates Using Mixed Silane Bead-Assisted Sonication Disintegration

Here, nanodiamonds have many attractive properties that make them suitable for a range of biological applications, but their practical use has been limited because nanodiamond conjugates tend to aggregate in solution during or after functionalisation. Here we demonstrate the production of DNA-detonation nanodiamond (DNA-DND) conjugates with high dispersion and solubility using an ultrasonic, mixed-silanization chemistry protocol based on the in situ Bead-Assisted Sonication Disintegration (BASD) silanization method. We use two silanes to achieve these properties: (1) 3-(trihydroxysilyl)propyl methylphosphonate (THPMP); a negatively charged silane that imparts high zeta potential and solubility in solution; and (2) (3-aminopropyl)triethoxysilane (APTES); a commonly used functional silane that contributes an amino group for subsequent bioconjugation. We target these amino groups for covalent conjugation to thiolated, single-stranded DNA oligomers using the heterobifunctional crosslinker sulfosuccinimidyl 4-(N-maleimidomethyl)cyclohexane-1-carboxylate (Sulfo-SMCC). The resulting DNA-DND conjugates are the smallest reported to date, as determined by Dynamic Light Scattering (DLS) and Atomic Force Microscopy (AFM). The functionalisation method we describe is versatile and can be used to produce a wide variety of soluble DND-biomolecule conjugates.

60 APPLIED LIFE SCIENCES↗

Aurivillius phases of PbBi{sub 4}Ti{sub 4}O{sub 15} doped with Mn{sup 3+} synthesized by molten salt technique: Structure, dielectric, and magnetic properties

Doping of manganese (Mn{sup 3+}/Mn{sup 4+}) into the Aurivillius phase Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} was carried out using the molten salt technique for various Mn concentrations (x=0, 0.2, 0.4, 0.6, 0.8, and 1). Single phase samples could be obtained in the composition range with x up to 0.6 as confirmed by X-ray and neutron diffraction analysis. Dielectric measurements show a peak at 801, 803, 813 and 850 K for samples with x=0, 0.2, 0.4, and 0.6, respectively, related to the ferroelectric transition temperature (T{sub c}). The main contribution of the in-plane polarization for x{<=}0.2 which was calculated from the atomic positions obtained by the structure analysis is the dipole moment in the Ti(1)O{sub 6} layer; however, for x{>=}0.4 the polarization originates from the dipole moment in the Ti(2)O{sub 6} layer. Mn doping in the Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} does not show any long range magnetic ordering. -- Graphical abstract: The dipole moment of TiO{sub 6} dependence of x in Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} (0{<=}x{<=}0.6): (a) along a-axis and (b) on the ab plane. This figure indicated that polarization in the ab-plane contribute to the total polarization. Display Omitted Highlights: {yields} We have prepared Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15}, 0{<=}x{<=}1 by the molten-salt method. {yields} The oxides adopted A2{sub 1}am space group. {yields} Dipole moments of the inner Ti(1)O{sub 6} are the main polarization contributor for x{<=}0.2. {yields} Dipole moments of the outer Ti(2)O{sub 6} are the main polarization contributor for x>0.2. {yields} Ferromagnetic interactions show the contribution of mixed valence of Mn{sup 3+}/Mn{sup 4+}.

36 MATERIALS SCIENCE↗

$\mathrm{^{12}C}$ properties with evolved chiral three-nucleon interactions

In this research, we investigate selected static and transition properties of $\mathrm{^{12}C}$ using ab initio no-core shell model (NCSM) methods with chiral two- and three-nucleon interactions. We adopt the similarity renormalization group (SRG) to assist convergence including up to three-nucleon ($3N$) contributions. We examine the dependencies of the 12 C observables on the SRG evolution scale and on the model-space parameters. We obtain nearly converged low-lying excitation spectra. We compare results of the full NCSM with the importance truncated NCSM in large model spaces for benchmarking purposes. We highlight the effects of the chiral $3N$ interaction on several spectroscopic observables. The agreement of some observables with experiment is improved significantly by the inclusion of $3N$ interactions, e.g., the $B(M1)$ from the first $J^πT = 1^+1$ state to the ground state. However, in some cases the agreement deteriorates, e.g., for the excitation energy of the first $1^+0$ state, leaving room for improved next-generation chiral Hamiltonians.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Trace anomaly, thermal power corrections, and dimension two condensates in the deconfined phase

The trace anomaly of gluodynamics on the lattice shows clear fingerprints of a dimension two condensate above the phase transition. The condensate manifests itself through even powers of the inverse temperature while the total perturbative contribution corresponds to a mild temperature dependence and turns out to be compatible with zero within errors. We try several resummation methods based on a renormalization group improvement. The trace anomaly data are analyzed and compared with other determinations of the dimension two condensate based on the Polyakov loop and the heavy qq free energy, yielding roughly similar numerical values. The role of glueballs near the transition is also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of perceived similarity between pairs of microcalcification clusters in mammograms

Purpose: Content-based image retrieval aims to assist radiologists by presenting example images with known pathology that are visually similar to the case being evaluated. In this work, the authors investigate several fundamental issues underlying the similarity ratings between pairs of microcalcification (MC) lesions on mammograms as judged by radiologists: the degree of variability in the similarity ratings, the impact of this variability on agreement between readers in retrieval of similar lesions, and the factors contributing to the readers’ similarity ratings. Methods: The authors conduct a reader study on a set of 1000 image pairs of MC lesions, in which a group of experienced breast radiologists rated the degree of similarity between each image pair. The image pairs are selected, from among possible pairings of 222 cases (110 malignant, 112 benign), based on quantitative image attributes (features) and the results of a preliminary reader study. Next, the authors apply analysis of variance (ANOVA) to quantify the level of variability in the readers’ similarity ratings, and study how the variability in individual reader ratings affects consistency between readers. The authors also measure the extent to which readers agree on images which are most similar to a given query, for which the Dice coefficient is used. To investigate how the similarity ratings potentially relate to the attributes underlying the cases, the authors study the fraction of perceptually similar images that also share the same benign or malignant pathology as the query image; moreover, the authors apply multidimensional scaling (MDS) to embed the cases according to their mutual perceptual similarity in a two-dimensional plot, which allows the authors to examine the manner in which similar lesions relate to one another in terms of benign or malignant pathology and clustered MCs. Results: The ANOVA results show that the coefficient of determination in the reader similarity ratings is 0.59. The variability level in the similarity ratings is proved to be a limiting factor, leading to only moderate correlation between the readers in their readings. The Dice coefficient, measuring agreement between readers in retrieval of similar images, can vary from 0.45 to 0.64 with different levels of similarity for individual readers, but is higher for average ratings from a group of readers (from 0.59 to 0.78). More importantly, the fraction of retrieved cases that match the benign or malignant pathology of the query image was found to increase with the degree of similarity among the retrieved images, reaching average value as high as 0.69 for the radiologists (p-value <10{sup −4} compared to random guessing). Moreover, MDS embedding of all the cases shows that cases having the same pathology tend to cluster together, and that neighboring cases in the plot tend to be similar in their clustered MCs. Conclusions: While individual readers exhibit substantial variability in their similarity ratings, similarity ratings averaged from a group of readers can achieve a high level of intergroup consistency and agreement in retrieval of similar images. More importantly, perceptually similar cases are also likely to be similar in their underlying benign or malignant pathology and image features of clustered MCs, which could be of diagnostic value in computer-aided diagnosis for lesions with clustered MCs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Topology for Statistical Modeling of Petascale Data

Many commonly used algorithms for mathematical analysis do not scale well enough to accommodate the size or complexity of petascale data produced by computational simulations. The primary goal of this project is to develop new mathematical tools that address both the petascale size and uncertain nature of current data. At a high level, the approach of the entire team involving all three institutions is based on the complementary techniques of combinatorial topology and statistical modelling. In particular, we use combinatorial topology to filter out spurious data that would otherwise skew statistical modelling techniques, and we employ advanced algorithms from algebraic statistics to efficiently find globally optimal fits to statistical models. The overall technical contributions can be divided loosely into three categories: (1) advances in the field of combinatorial topology, (2) advances in statistical modelling, and (3) new integrated topological and statistical methods. Roughly speaking, the division of labor between our 3 groups (Sandia Labs in Livermore, Texas A&M in College Station, and U Utah in Salt Lake City) is as follows: the Sandia group focuses on statistical methods and their formulation in algebraic terms, and finds the application problems (and data sets) most relevant to this project, the Texas A&M Group develops new algebraic geometry algorithms, in particular with fewnomial theory, and the Utah group develops new algorithms in computational topology via Discrete Morse Theory. However, we hasten to point out that our three groups stay in tight contact via videconference every 2 weeks, so there is much synergy of ideas between the groups. The following of this document is focused on the contributions that had grater direct involvement from the team at the University of Utah in Salt Lake City.

97 MATHEMATICS AND COMPUTING↗

On the Heating of Ions in Noncylindrical Z-Pinches

The method proposed here for analyzing processes in a hot plasma of noncylindrical Z-pinches is based on separation of the group of high-energy ions into a special fraction. Such ions constitute an insignificant fraction (~10%) of the total volume of the Z-pinch plasma, but these ions contribute the most to the formation of conditions in which the pinch becomes a source of nuclear fusion products and X-ray radiation. The method allows a quite correct approach to obtaining quantitative estimates of the plasma parameters, the nuclear fusion energy yield, and the features of neutron fluxes in experiments with Z-pinches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reanalysis of the top-quark pair hadroproduction and a precise determination of the top-quark pole mass at the LHC *

In this study, we calculate the $t\bar{t}$ pQCD production cross-section at the NNLO and determine the top-quark pole mass from recent measurements at the LHC at the center-of-mass energy $\sqrt{S}=13$ TeV to a high precision by applying the principle of maximum conformality (PMC). The PMC provides a systematic method that rigorously eliminates QCD renormalization scale ambiguities by summing the nonconformal $\beta$ contributions into the QCD coupling constant. The PMC predictions satisfy the requirements of renormalization group invariance, including renormalization scheme independence, and the PMC scales accurately reflect the virtuality of the underlying production subprocesses. By using the PMC, an improved prediction for the $t\bar{t}$ production cross-section is obtained without scale ambiguities, which in turn provides a precise value for the top-quark pole mass. Moreover, the prediction of PMC calculations that the magnitudes of higher-order PMC predictions are well within the error bars predicted from the known lower-order has been demonstrated for the top-quark pair production. The resulting determination of the top-quark pole mass, $m_t^{\rm{pole}}=172.5\pm1.4$ GeV, from the LHC measurement at $\sqrt{S}=13$ TeV agrees with the current world average cited by the Particle Data Group (PDG). The PMC prediction provides an important high-precision test of the consistency of pQCD and the SM at $\sqrt{S}=13$ TeV with previous LHC measurements at lower CM energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Advances in membrane protein crystallography: in situ and in meso data collection

Membrane protein structural biology has made tremendous advances over the last decade but there are still many challenges associated with crystallization, data collection and structure determination. Two independent groups, Axford et al. [(2015), Acta Cryst. D71, 1228–1237] and Huang et al. [(2015), Acta Cryst. D71, 1238–1256], have published methods that make a major contribution to addressing these challenges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stochastic Forecasting of Algae Blooms in Lakes

We consider the development of harmful algae blooms (HABs) in a lake with uncertain nutrients inflow. Two general frameworks, Fokker-Planck equation and the PDF methods, are developed to quantify the resultant concentration uncertainty of various algae groups, via deriving a deterministic equation of their joint probability density function (PDF). A computational example is examined to study the evolution of cyanobacteria (the blue-green algae) and the impacts of initial concentration and inflow-outflow ratio.

uncetainty quantification, algae, Fokker-Planck, L↗

An analysis and evaluation of the WeFold collaborative for protein structure prediction and its pipelines in CASP11 and CASP12

Every two years groups worldwide participate in the Critical Assessment of Protein Structure Prediction (CASP) experiment to blindly test the strengths and weaknesses of their computational methods. CASP has significantly advanced the field but many hurdles still remain, which may require new ideas and collaborations. In 2012 a web-based effort called WeFold, was initiated to promote collaboration within the CASP community and attract researchers from other fields to contribute new ideas to CASP. Members of the WeFold coopetition (cooperation and competition) participated in CASP as individual teams, but also shared components of their methods to create hybrid pipelines and actively contributed to this effort. We assert that the scale and diversity of integrative prediction pipelines could not have been achieved by any individual lab or even by any collaboration among a few partners. The models contributed by the participating groups and generated by the pipelines are publicly available at the WeFold website providing a wealth of data that remains to be tapped. Here, we analyze the results of the 2014 and 2016 pipelines showing improvements according to the CASP assessment as well as areas that require further adjustments and research.

59 BASIC BIOLOGICAL SCIENCES↗